{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "y02-05-multi-stand-cold-roll-forming-mill",
  "assetTypeId": "y02-05-multi-stand-cold-roll-forming-mill",
  "label": "롤 포밍 라인",
  "category": "Y 뿌리산업 공정",
  "description": "6개 프로파일 롤 스탠드·실제 보어 축/베어링과 상부 롤 가이드·나사 조절, 소재 공급/성형 배출 datum을 분리한 롤 포밍 타입.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -3.4000000953674316,
      6.705522526129215e-10,
      -1.2000000476837158
    ],
    "max": [
      3.4000000953674316,
      1.5849999997764828,
      1.279415
    ]
  },
  "size": [
    6.800000190734863,
    1.5849999991059305,
    2.479415047683716
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 69,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 0,
      "blindSocketHeads": 0,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 48,
    "warnings": [],
    "changedMeshes": 69,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 105460,
      "afterTriangles": 73204,
      "reachedTarget": true,
      "changedMeshes": 48,
      "changes": [
        {
          "meshes": [
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6/wheel-spoke-0",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6/wheel-spoke-1",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6/wheel-spoke-2",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6/wheel-spoke-0",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6/wheel-spoke-1",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6/wheel-spoke-2",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6/wheel-spoke-0",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6/wheel-spoke-1",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6/wheel-spoke-2",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6/wheel-spoke-0",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6/wheel-spoke-1",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6/wheel-spoke-2",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6/wheel-spoke-0",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6/wheel-spoke-1",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6/wheel-spoke-2",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6/wheel-spoke-0",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6/wheel-spoke-1",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6/wheel-spoke-2",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6/wheel-spoke-0",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6/wheel-spoke-1",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6/wheel-spoke-2",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6/wheel-spoke-0",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6/wheel-spoke-1",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6/wheel-spoke-2",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6/wheel-spoke-0",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6/wheel-spoke-1",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6/wheel-spoke-2",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6/wheel-spoke-0",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6/wheel-spoke-1",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6/wheel-spoke-2",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6/wheel-spoke-0",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6/wheel-spoke-1",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6/wheel-spoke-2",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6/wheel-spoke-0",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6/wheel-spoke-1",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6/wheel-spoke-2"
          ],
          "radiusM": 0.003,
          "dimensionsM": [
            0.055,
            0.018,
            0.018
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-0--0.6",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-0-0.6",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-1--0.6",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-1-0.6",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-2--0.6",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-2-0.6",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-3--0.6",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-3-0.6",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-4--0.6",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-4-0.6",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-5--0.6",
            "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-5-0.6"
          ],
          "radiusM": 0.003,
          "dimensionsM": [
            0.4,
            0.4,
            0.24
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        }
      ],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/y02-05-multi-stand-cold-roll-forming-mill.mjs",
    "sourceSha256": "sha256:c571b89d6b864e33daec7a89e06a38d72f1ac3bb255a4e91ddc883890dd68dc9",
    "deliverySha256": "sha256:c571b89d6b864e33daec7a89e06a38d72f1ac3bb255a4e91ddc883890dd68dc9",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:fe3101759c5b8672ab55199639f517ecf8d97afe7fbb1a33dfe9ebdfdc1443b4",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:fe3101759c5b8672ab55199639f517ecf8d97afe7fbb1a33dfe9ebdfdc1443b4",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [],
  "parameterValues": {},
  "joints": [
    {
      "id": "roll_spin",
      "label": "성형 롤 표시 회전",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "unit": "rad",
      "min": -6.283185307179586,
      "max": 6.283185307179586,
      "initial": 0
    },
    {
      "id": "upper_gap",
      "label": "상부 롤 이격",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "unit": "m",
      "min": 0,
      "max": 0.16,
      "initial": 0.05
    }
  ],
  "initialState": {
    "roll_spin": 0,
    "upper_gap": 0.05
  },
  "bindings": [
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -2,
        0.78,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-0",
      "gltfNode": 35
    },
    {
      "id": "upper_gap",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        -2,
        1.025,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0",
      "gltfNode": 38
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        -0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6",
      "gltfNode": 42
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6",
      "gltfNode": 52
    },
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/upper-roll",
      "gltfNode": 59
    },
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -1.2,
        0.78,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-1",
      "gltfNode": 73
    },
    {
      "id": "upper_gap",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        -1.2,
        1.025,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1",
      "gltfNode": 76
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        -0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6",
      "gltfNode": 80
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6",
      "gltfNode": 90
    },
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/upper-roll",
      "gltfNode": 97
    },
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -0.3999999999999999,
        0.78,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-2",
      "gltfNode": 111
    },
    {
      "id": "upper_gap",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        -0.3999999999999999,
        1.025,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2",
      "gltfNode": 115
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        -0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6",
      "gltfNode": 119
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6",
      "gltfNode": 129
    },
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/upper-roll",
      "gltfNode": 136
    },
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0.40000000000000036,
        0.78,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-3",
      "gltfNode": 151
    },
    {
      "id": "upper_gap",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0.40000000000000036,
        1.025,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3",
      "gltfNode": 154
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        -0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6",
      "gltfNode": 158
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6",
      "gltfNode": 168
    },
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/upper-roll",
      "gltfNode": 175
    },
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        1.2000000000000002,
        0.78,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-4",
      "gltfNode": 189
    },
    {
      "id": "upper_gap",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        1.2000000000000002,
        1.025,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4",
      "gltfNode": 192
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        -0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6",
      "gltfNode": 196
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6",
      "gltfNode": 206
    },
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/upper-roll",
      "gltfNode": 213
    },
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        2,
        0.78,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-5",
      "gltfNode": 227
    },
    {
      "id": "upper_gap",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        2,
        1.025,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5",
      "gltfNode": 230
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        -0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6",
      "gltfNode": 234
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6",
      "gltfNode": 244
    },
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/upper-roll",
      "gltfNode": 251
    }
  ],
  "jointBindings": [
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -2,
        0.78,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-0",
      "gltfNode": 35
    },
    {
      "id": "upper_gap",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        -2,
        1.025,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0",
      "gltfNode": 38
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        -0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6",
      "gltfNode": 42
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6",
      "gltfNode": 52
    },
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/upper-roll",
      "gltfNode": 59
    },
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -1.2,
        0.78,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-1",
      "gltfNode": 73
    },
    {
      "id": "upper_gap",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        -1.2,
        1.025,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1",
      "gltfNode": 76
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        -0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6",
      "gltfNode": 80
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6",
      "gltfNode": 90
    },
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/upper-roll",
      "gltfNode": 97
    },
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -0.3999999999999999,
        0.78,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-2",
      "gltfNode": 111
    },
    {
      "id": "upper_gap",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        -0.3999999999999999,
        1.025,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2",
      "gltfNode": 115
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        -0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6",
      "gltfNode": 119
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6",
      "gltfNode": 129
    },
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/upper-roll",
      "gltfNode": 136
    },
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0.40000000000000036,
        0.78,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-3",
      "gltfNode": 151
    },
    {
      "id": "upper_gap",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0.40000000000000036,
        1.025,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3",
      "gltfNode": 154
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        -0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6",
      "gltfNode": 158
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6",
      "gltfNode": 168
    },
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/upper-roll",
      "gltfNode": 175
    },
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        1.2000000000000002,
        0.78,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-4",
      "gltfNode": 189
    },
    {
      "id": "upper_gap",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        1.2000000000000002,
        1.025,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4",
      "gltfNode": 192
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        -0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6",
      "gltfNode": 196
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6",
      "gltfNode": 206
    },
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/upper-roll",
      "gltfNode": 213
    },
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        2,
        0.78,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-5",
      "gltfNode": 227
    },
    {
      "id": "upper_gap",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        2,
        1.025,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5",
      "gltfNode": 230
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        -0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6",
      "gltfNode": 234
    },
    {
      "id": "upper_gap",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.275,
        0.6
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 314.1592653589793,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6",
      "gltfNode": 244
    },
    {
      "id": "roll_spin",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1,
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/upper-roll",
      "gltfNode": 251
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "roll_marker": {
      "id": "roll_marker",
      "node": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-2/y02-05-multi-stand-cold-roll-forming-mill:roll_marker",
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-2/y02-05-multi-stand-cold-roll-forming-mill:roll_marker",
      "gltfNode": 114,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.29999999999999993,
        0.78,
        0,
        1
      ],
      "position": [
        -0.29999999999999993,
        0.78,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "upper_datum": {
      "id": "upper_datum",
      "node": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/y02-05-multi-stand-cold-roll-forming-mill:upper_datum",
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/y02-05-multi-stand-cold-roll-forming-mill:upper_datum",
      "gltfNode": 139,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.3999999999999999,
        0.955,
        0,
        1
      ],
      "position": [
        -0.3999999999999999,
        0.955,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "stock_in": {
      "id": "stock_in",
      "node": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/y02-05-multi-stand-cold-roll-forming-mill:stock_in",
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/y02-05-multi-stand-cold-roll-forming-mill:stock_in",
      "gltfNode": 265,
      "matrix": [
        2.220446049250313e-16,
        0,
        1,
        0,
        0,
        1,
        0,
        0,
        -1,
        0,
        2.220446049250313e-16,
        0,
        -3.2,
        0.902,
        0,
        1
      ],
      "position": [
        -3.2,
        0.902,
        0
      ],
      "quaternion": [
        0,
        -0.7071067811865475,
        0,
        0.7071067811865476
      ]
    },
    "profile_out": {
      "id": "profile_out",
      "node": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/y02-05-multi-stand-cold-roll-forming-mill:profile_out",
      "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/y02-05-multi-stand-cold-roll-forming-mill:profile_out",
      "gltfNode": 266,
      "matrix": [
        2.220446049250313e-16,
        0,
        -1,
        0,
        0,
        1,
        0,
        0,
        1,
        0,
        2.220446049250313e-16,
        0,
        3.2,
        0.902,
        0,
        1
      ],
      "position": [
        3.2,
        0.902,
        0
      ],
      "quaternion": [
        0,
        0.7071067811865475,
        0,
        0.7071067811865476
      ]
    }
  },
  "ports": {
    "mount": "base",
    "stock_in": "stock_in",
    "profile_out": "profile_out",
    "roll_marker": "roll_marker",
    "upper_datum": "upper_datum"
  },
  "nodes": [
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 69,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 0,
            "blindSocketHeads": 0,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 48,
          "warnings": [],
          "changedMeshes": 69,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 105460,
            "afterTriangles": 73204,
            "reachedTarget": true,
            "changedMeshes": 48,
            "changes": [
              {
                "meshes": [
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6/wheel-spoke-0",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6/wheel-spoke-1",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6/wheel-spoke-2",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6/wheel-spoke-0",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6/wheel-spoke-1",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6/wheel-spoke-2",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6/wheel-spoke-0",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6/wheel-spoke-1",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6/wheel-spoke-2",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6/wheel-spoke-0",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6/wheel-spoke-1",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6/wheel-spoke-2",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6/wheel-spoke-0",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6/wheel-spoke-1",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6/wheel-spoke-2",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6/wheel-spoke-0",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6/wheel-spoke-1",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6/wheel-spoke-2",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6/wheel-spoke-0",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6/wheel-spoke-1",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6/wheel-spoke-2",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6/wheel-spoke-0",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6/wheel-spoke-1",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6/wheel-spoke-2",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6/wheel-spoke-0",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6/wheel-spoke-1",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6/wheel-spoke-2",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6/wheel-spoke-0",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6/wheel-spoke-1",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6/wheel-spoke-2",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6/wheel-spoke-0",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6/wheel-spoke-1",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6/wheel-spoke-2",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6/wheel-spoke-0",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6/wheel-spoke-1",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6/wheel-spoke-2"
                ],
                "radiusM": 0.003,
                "dimensionsM": [
                  0.055,
                  0.018,
                  0.018
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-0--0.6",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-0-0.6",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-1--0.6",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-1-0.6",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-2--0.6",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-2-0.6",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-3--0.6",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-3-0.6",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-4--0.6",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-4-0.6",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-5--0.6",
                  "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-5-0.6"
                ],
                "radiusM": 0.003,
                "dimensionsM": [
                  0.4,
                  0.4,
                  0.24
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              }
            ],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "y02-05-multi-stand-cold-roll-forming-mill",
          "coordinate_profile": "lib3d-world/1",
          "label": "다단 냉간 롤 포밍 라인",
          "category": "Y 뿌리산업 공정",
          "summary": "6개 프로파일 롤 스탠드·실제 보어 축/베어링과 상부 롤 가이드·나사 조절, 소재 공급/성형 배출 datum을 분리한 롤 포밍 타입.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [],
          "joints": [
            {
              "id": "roll_spin",
              "label": "성형 롤 표시 회전",
              "kind": "revolute",
              "axis": [
                0,
                0,
                1
              ],
              "unit": "rad",
              "min": -6.283185307179586,
              "max": 6.283185307179586,
              "initial": 0
            },
            {
              "id": "upper_gap",
              "label": "상부 롤 이격",
              "kind": "prismatic",
              "axis": [
                0,
                1,
                0
              ],
              "unit": "m",
              "min": 0,
              "max": 0.16,
              "initial": 0.05
            }
          ],
          "ports": {
            "mount": "base",
            "stock_in": "stock_in",
            "profile_out": "profile_out",
            "roll_marker": "roll_marker",
            "upper_datum": "upper_datum"
          },
          "required_host_features": [
            "revolute",
            "prismatic"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "전체 치수·기구 비례 자체 설계. 제조사 CAD·성능·인증 근거 아님."
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "accessed_on": "2026-10-24",
              "title": "Bradbury roll former configurations",
              "url": "https://www.bradburygroup.com/bradbury-group-roll-formers",
              "basis": "스탠드·축·롤 툴링과 교환식 서브플레이트의 분해 원리만 참고. 정격·치수·성형 성능 인용 없음."
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {},
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
          "roll_marker": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-2/y02-05-multi-stand-cold-roll-forming-mill:roll_marker",
          "upper_datum": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/y02-05-multi-stand-cold-roll-forming-mill:upper_datum",
          "stock_in": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/y02-05-multi-stand-cold-roll-forming-mill:stock_in",
          "profile_out": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/y02-05-multi-stand-cold-roll-forming-mill:profile_out"
        },
        "jointBindings": [
          {
            "id": "roll_spin",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              -2,
              0.78,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-0"
          },
          {
            "id": "upper_gap",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              -2,
              1.025,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0"
          },
          {
            "id": "upper_gap",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0.275,
              -0.6
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 314.1592653589793,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6"
          },
          {
            "id": "upper_gap",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0.275,
              0.6
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 314.1592653589793,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6"
          },
          {
            "id": "roll_spin",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": -1,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/upper-roll"
          },
          {
            "id": "roll_spin",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              -1.2,
              0.78,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-1"
          },
          {
            "id": "upper_gap",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              -1.2,
              1.025,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1"
          },
          {
            "id": "upper_gap",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0.275,
              -0.6
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 314.1592653589793,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6"
          },
          {
            "id": "upper_gap",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0.275,
              0.6
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 314.1592653589793,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6"
          },
          {
            "id": "roll_spin",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": -1,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/upper-roll"
          },
          {
            "id": "roll_spin",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              -0.3999999999999999,
              0.78,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-2"
          },
          {
            "id": "upper_gap",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              -0.3999999999999999,
              1.025,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2"
          },
          {
            "id": "upper_gap",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0.275,
              -0.6
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 314.1592653589793,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6"
          },
          {
            "id": "upper_gap",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0.275,
              0.6
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 314.1592653589793,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6"
          },
          {
            "id": "roll_spin",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": -1,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/upper-roll"
          },
          {
            "id": "roll_spin",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0.40000000000000036,
              0.78,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-3"
          },
          {
            "id": "upper_gap",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0.40000000000000036,
              1.025,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3"
          },
          {
            "id": "upper_gap",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0.275,
              -0.6
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 314.1592653589793,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6"
          },
          {
            "id": "upper_gap",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0.275,
              0.6
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 314.1592653589793,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6"
          },
          {
            "id": "roll_spin",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": -1,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/upper-roll"
          },
          {
            "id": "roll_spin",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              1.2000000000000002,
              0.78,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-4"
          },
          {
            "id": "upper_gap",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              1.2000000000000002,
              1.025,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4"
          },
          {
            "id": "upper_gap",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0.275,
              -0.6
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 314.1592653589793,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6"
          },
          {
            "id": "upper_gap",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0.275,
              0.6
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 314.1592653589793,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6"
          },
          {
            "id": "roll_spin",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": -1,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/upper-roll"
          },
          {
            "id": "roll_spin",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              2,
              0.78,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-5"
          },
          {
            "id": "upper_gap",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              2,
              1.025,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5"
          },
          {
            "id": "upper_gap",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0.275,
              -0.6
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 314.1592653589793,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6"
          },
          {
            "id": "upper_gap",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0.275,
              0.6
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 314.1592653589793,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6"
          },
          {
            "id": "roll_spin",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": -1,
            "nodeName": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/upper-roll"
          }
        ],
        "joints": [
          {
            "id": "roll_spin",
            "label": "성형 롤 표시 회전",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "unit": "rad",
            "min": -6.283185307179586,
            "max": 6.283185307179586,
            "initial": 0,
            "value": 0
          },
          {
            "id": "upper_gap",
            "label": "상부 롤 이격",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "unit": "m",
            "min": 0,
            "max": 0.16,
            "initial": 0.05,
            "value": 0.05
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 39
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "전체 치수·기구 비례 자체 설계. 제조사 CAD·성능·인증 근거 아님."
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "accessed_on": "2026-10-24",
            "title": "Bradbury roll former configurations",
            "url": "https://www.bradburygroup.com/bradbury-group-roll-formers",
            "basis": "스탠드·축·롤 툴링과 교환식 서브플레이트의 분해 원리만 참고. 정격·치수·성형 성능 인용 없음."
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "roll_spin": 0,
          "upper_gap": 0.05
        }
      },
      "gltfNode": 0
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill:base",
        "explicitAnnularPassages": []
      },
      "gltfNode": 1
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/foundation",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.03,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/foundation",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 2
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/skid-beam--1.05",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.18,
        -1.05,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/skid-beam--1.05",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 6.58,
            "height": 0.16,
            "depth": 0.14,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 3
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/skid-foot--3.15--1.05",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.15,
        0.09,
        -1.05,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/skid-foot--3.15--1.05",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.14,
            "height": 0.06,
            "depth": 0.18,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 4
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/skid-foot-3.15--1.05",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.15,
        0.09,
        -1.05,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/skid-foot-3.15--1.05",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.14,
            "height": 0.06,
            "depth": 0.18,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 5
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/skid-beam-1.05",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.18,
        1.05,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/skid-beam-1.05",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 6.58,
            "height": 0.16,
            "depth": 0.14,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 6
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/skid-foot--3.15-1.05",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.15,
        0.09,
        1.05,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/skid-foot--3.15-1.05",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.14,
            "height": 0.06,
            "depth": 0.18,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 7
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/skid-foot-3.15-1.05",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.15,
        0.09,
        1.05,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/skid-foot-3.15-1.05",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.14,
            "height": 0.06,
            "depth": 0.18,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 8
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/skid-side--3.25",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.25,
        0.18,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/skid-side--3.25",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.14,
            "height": 0.16,
            "depth": 2.1,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 9
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/skid-side-3.25",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.25,
        0.18,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/skid-side-3.25",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.14,
            "height": 0.16,
            "depth": 2.1,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 10
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/operator-plinth",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.3,
        1.15,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/operator-plinth",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.2,
            "height": 0.36,
            "depth": 0.2,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 11
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.3,
        1.26,
        1
      ],
      "sourceUserData": {
        "partId": "DS_Brand_Plate",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 12
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate/badge-bezel",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate/badge-bezel",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 13
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate/badge-backing",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate/badge-backing",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 14
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate/badge-rivet-0",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.35535,
        -0.07035,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate/badge-rivet-0",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 15
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate/badge-rivet-1",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.35535,
        0.07035,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate/badge-rivet-1",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 16
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate/badge-rivet-2",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.35535,
        -0.07035,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate/badge-rivet-2",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 17
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate/badge-rivet-3",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.35535,
        0.07035,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate/badge-rivet-3",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 18
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate/badge-D",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.12179999999999999,
        0,
        0,
        0,
        0,
        0.12179999999999999,
        0,
        0,
        0,
        0,
        0.009899999999999999,
        0,
        -0.053591999999999994,
        0,
        0.009515,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate/badge-D",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 19
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate/badge-S",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.12179999999999999,
        0,
        0,
        0,
        0,
        0.12179999999999999,
        0,
        0,
        0,
        0,
        0.009899999999999999,
        0,
        0.053591999999999994,
        0,
        0.009515,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate/badge-S",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 20
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate/badge-D-back",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.12179999999999999,
        0,
        -1.491619801361476e-17,
        0,
        0,
        0.12179999999999999,
        0,
        0,
        1.2124003311558795e-18,
        0,
        -0.009899999999999999,
        0,
        0.053591999999999994,
        0,
        -0.009515,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate/badge-D-back",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 21
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate/badge-S-back",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.12179999999999999,
        0,
        -1.491619801361476e-17,
        0,
        0,
        0.12179999999999999,
        0,
        0,
        1.2124003311558795e-18,
        0,
        -0.009899999999999999,
        0,
        -0.053591999999999994,
        0,
        -0.009515,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/DS_Brand_Plate/badge-S-back",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 22
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/mill-long-bed--0.62",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.4,
        -0.62,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/mill-long-bed--0.62",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 5,
            "height": 0.28,
            "depth": 0.24,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 23
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/mill-long-bed-0.62",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.4,
        0.62,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/mill-long-bed-0.62",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 5,
            "height": 0.28,
            "depth": 0.24,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 24
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-0--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2,
        0.51,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-0--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.4,
            "height": 0.4,
            "depth": 0.24,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 25
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-0--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2,
        0.68,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-0--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 26
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-0--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2,
        0.78,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-0--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 27
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-0--0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.12,
        1.045,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-0--0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 28
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-0--0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.88,
        1.045,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-0--0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 29
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-0-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2,
        0.51,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-0-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.4,
            "height": 0.4,
            "depth": 0.24,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 30
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-0-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2,
        0.68,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-0-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 31
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-0-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2,
        0.78,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-0-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 32
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-0-0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.12,
        1.045,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-0-0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 33
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-0-0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.88,
        1.045,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-0-0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 34
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-0",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2,
        0.78,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "lower-roll-0"
      },
      "gltfNode": 35
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-0/lower-roll-shaft",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-0",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-0/lower-roll-shaft",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 36
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-0/lower-profile-tool",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-0",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-0/lower-profile-tool",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill"
      },
      "gltfNode": 37
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2,
        1.075,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "upper-stand-0"
      },
      "gltfNode": 38
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/upper-bearing--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/upper-bearing--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 39
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/upper-guide-lug--0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.12,
        0,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/upper-guide-lug--0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 40
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/upper-guide-lug--0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.12,
        0,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/upper-guide-lug--0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 41
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        -1,
        0,
        1.164033439826574e-15,
        0,
        0,
        1,
        0,
        0,
        -1.164033439826574e-15,
        0,
        -1,
        0,
        0,
        0.275,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "roll-adjuster--0.6"
      },
      "gltfNode": 42
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6/roll-adjustment-stem",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6/roll-adjustment-stem",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 43
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6/adjustment-wheel",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6/adjustment-wheel",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 44
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6/adjustment-wheel-hub",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.2,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6/adjustment-wheel-hub",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 45
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6/wheel-spoke-0",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.04,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6/wheel-spoke-0",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 46
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6/wheel-spoke-1",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.4999999999999998,
        0,
        0.8660254037844388,
        0,
        0,
        1,
        0,
        0,
        -0.8660254037844388,
        0,
        -0.4999999999999998,
        0,
        -0.01999999999999999,
        0.225,
        0.034641016151377546,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6/wheel-spoke-1",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 47
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6/wheel-spoke-2",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.5000000000000002,
        0,
        -0.8660254037844384,
        0,
        0,
        1,
        0,
        0,
        0.8660254037844384,
        0,
        -0.5000000000000002,
        0,
        -0.020000000000000018,
        0.225,
        -0.03464101615137754,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster--0.6/wheel-spoke-2",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 48
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/upper-bearing-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/upper-bearing-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 49
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/upper-guide-lug-0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.12,
        0,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/upper-guide-lug-0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 50
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/upper-guide-lug-0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.12,
        0,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/upper-guide-lug-0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 51
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        -1,
        0,
        1.164033439826574e-15,
        0,
        0,
        1,
        0,
        0,
        -1.164033439826574e-15,
        0,
        -1,
        0,
        0,
        0.275,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "roll-adjuster-0.6"
      },
      "gltfNode": 52
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6/roll-adjustment-stem",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6/roll-adjustment-stem",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 53
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6/adjustment-wheel",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6/adjustment-wheel",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 54
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6/adjustment-wheel-hub",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.2,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6/adjustment-wheel-hub",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 55
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6/wheel-spoke-0",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.04,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6/wheel-spoke-0",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 56
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6/wheel-spoke-1",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.4999999999999998,
        0,
        0.8660254037844388,
        0,
        0,
        1,
        0,
        0,
        -0.8660254037844388,
        0,
        -0.4999999999999998,
        0,
        -0.01999999999999999,
        0.225,
        0.034641016151377546,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6/wheel-spoke-1",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 57
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6/wheel-spoke-2",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.5000000000000002,
        0,
        -0.8660254037844384,
        0,
        0,
        1,
        0,
        0,
        0.8660254037844384,
        0,
        -0.5000000000000002,
        0,
        -0.020000000000000018,
        0.225,
        -0.03464101615137754,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/roll-adjuster-0.6/wheel-spoke-2",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 58
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/upper-roll",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "upper-roll"
      },
      "gltfNode": 59
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/upper-roll/upper-roll-shaft",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/upper-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/upper-roll/upper-roll-shaft",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 60
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/upper-roll/upper-profile-tool",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/upper-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-0/upper-roll/upper-profile-tool",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill"
      },
      "gltfNode": 61
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-head-0",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2,
        1.415,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-head-0",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 62
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-1--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.2,
        0.51,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-1--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.4,
            "height": 0.4,
            "depth": 0.24,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 63
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-1--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.2,
        0.68,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-1--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 64
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-1--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.2,
        0.78,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-1--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 65
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-1--0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3199999999999998,
        1.045,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-1--0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 66
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-1--0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.08,
        1.045,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-1--0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 67
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-1-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.2,
        0.51,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-1-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.4,
            "height": 0.4,
            "depth": 0.24,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 68
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-1-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.2,
        0.68,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-1-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 69
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-1-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.2,
        0.78,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-1-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 70
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-1-0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3199999999999998,
        1.045,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-1-0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 71
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-1-0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.08,
        1.045,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-1-0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 72
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-1",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.2,
        0.78,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "lower-roll-1"
      },
      "gltfNode": 73
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-1/lower-roll-shaft",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-1/lower-roll-shaft",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 74
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-1/lower-profile-tool",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-1/lower-profile-tool",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill"
      },
      "gltfNode": 75
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.2,
        1.075,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "upper-stand-1"
      },
      "gltfNode": 76
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/upper-bearing--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/upper-bearing--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 77
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/upper-guide-lug--0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.12,
        0,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/upper-guide-lug--0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 78
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/upper-guide-lug--0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.12,
        0,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/upper-guide-lug--0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 79
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        -1,
        0,
        1.164033439826574e-15,
        0,
        0,
        1,
        0,
        0,
        -1.164033439826574e-15,
        0,
        -1,
        0,
        0,
        0.275,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "roll-adjuster--0.6"
      },
      "gltfNode": 80
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6/roll-adjustment-stem",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6/roll-adjustment-stem",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 81
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6/adjustment-wheel",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6/adjustment-wheel",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 82
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6/adjustment-wheel-hub",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.2,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6/adjustment-wheel-hub",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 83
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6/wheel-spoke-0",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.04,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6/wheel-spoke-0",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 84
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6/wheel-spoke-1",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.4999999999999998,
        0,
        0.8660254037844388,
        0,
        0,
        1,
        0,
        0,
        -0.8660254037844388,
        0,
        -0.4999999999999998,
        0,
        -0.01999999999999999,
        0.225,
        0.034641016151377546,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6/wheel-spoke-1",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 85
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6/wheel-spoke-2",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.5000000000000002,
        0,
        -0.8660254037844384,
        0,
        0,
        1,
        0,
        0,
        0.8660254037844384,
        0,
        -0.5000000000000002,
        0,
        -0.020000000000000018,
        0.225,
        -0.03464101615137754,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster--0.6/wheel-spoke-2",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 86
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/upper-bearing-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/upper-bearing-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 87
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/upper-guide-lug-0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.12,
        0,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/upper-guide-lug-0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 88
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/upper-guide-lug-0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.12,
        0,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/upper-guide-lug-0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 89
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        -1,
        0,
        1.164033439826574e-15,
        0,
        0,
        1,
        0,
        0,
        -1.164033439826574e-15,
        0,
        -1,
        0,
        0,
        0.275,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "roll-adjuster-0.6"
      },
      "gltfNode": 90
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6/roll-adjustment-stem",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6/roll-adjustment-stem",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 91
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6/adjustment-wheel",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6/adjustment-wheel",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 92
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6/adjustment-wheel-hub",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.2,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6/adjustment-wheel-hub",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 93
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6/wheel-spoke-0",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.04,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6/wheel-spoke-0",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 94
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6/wheel-spoke-1",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.4999999999999998,
        0,
        0.8660254037844388,
        0,
        0,
        1,
        0,
        0,
        -0.8660254037844388,
        0,
        -0.4999999999999998,
        0,
        -0.01999999999999999,
        0.225,
        0.034641016151377546,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6/wheel-spoke-1",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 95
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6/wheel-spoke-2",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.5000000000000002,
        0,
        -0.8660254037844384,
        0,
        0,
        1,
        0,
        0,
        0.8660254037844384,
        0,
        -0.5000000000000002,
        0,
        -0.020000000000000018,
        0.225,
        -0.03464101615137754,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/roll-adjuster-0.6/wheel-spoke-2",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 96
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/upper-roll",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "upper-roll"
      },
      "gltfNode": 97
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/upper-roll/upper-roll-shaft",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/upper-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/upper-roll/upper-roll-shaft",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 98
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/upper-roll/upper-profile-tool",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/upper-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-1/upper-roll/upper-profile-tool",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill"
      },
      "gltfNode": 99
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-head-1",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.2,
        1.415,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-head-1",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 100
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-2--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.3999999999999999,
        0.51,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-2--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.4,
            "height": 0.4,
            "depth": 0.24,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 101
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-2--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.3999999999999999,
        0.68,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-2--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 102
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-2--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.3999999999999999,
        0.78,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-2--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 103
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-2--0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.5199999999999999,
        1.045,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-2--0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 104
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-2--0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.2799999999999999,
        1.045,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-2--0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 105
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-2-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.3999999999999999,
        0.51,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-2-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.4,
            "height": 0.4,
            "depth": 0.24,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 106
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-2-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.3999999999999999,
        0.68,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-2-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 107
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-2-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.3999999999999999,
        0.78,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-2-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 108
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-2-0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.5199999999999999,
        1.045,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-2-0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 109
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-2-0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.2799999999999999,
        1.045,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-2-0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 110
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-2",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.3999999999999999,
        0.78,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "lower-roll-2"
      },
      "gltfNode": 111
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-2/lower-roll-shaft",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-2",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-2/lower-roll-shaft",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 112
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-2/lower-profile-tool",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-2",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-2/lower-profile-tool",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill"
      },
      "gltfNode": 113
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-2/y02-05-multi-stand-cold-roll-forming-mill:roll_marker",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-2",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.1,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill:roll_marker"
      },
      "gltfNode": 114
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.3999999999999999,
        1.075,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "upper-stand-2"
      },
      "gltfNode": 115
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/upper-bearing--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/upper-bearing--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 116
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/upper-guide-lug--0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.12,
        0,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/upper-guide-lug--0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 117
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/upper-guide-lug--0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.12,
        0,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/upper-guide-lug--0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 118
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        -1,
        0,
        1.164033439826574e-15,
        0,
        0,
        1,
        0,
        0,
        -1.164033439826574e-15,
        0,
        -1,
        0,
        0,
        0.275,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "roll-adjuster--0.6"
      },
      "gltfNode": 119
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6/roll-adjustment-stem",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6/roll-adjustment-stem",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 120
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6/adjustment-wheel",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6/adjustment-wheel",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 121
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6/adjustment-wheel-hub",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.2,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6/adjustment-wheel-hub",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 122
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6/wheel-spoke-0",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.04,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6/wheel-spoke-0",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 123
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6/wheel-spoke-1",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.4999999999999998,
        0,
        0.8660254037844388,
        0,
        0,
        1,
        0,
        0,
        -0.8660254037844388,
        0,
        -0.4999999999999998,
        0,
        -0.01999999999999999,
        0.225,
        0.034641016151377546,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6/wheel-spoke-1",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 124
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6/wheel-spoke-2",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.5000000000000002,
        0,
        -0.8660254037844384,
        0,
        0,
        1,
        0,
        0,
        0.8660254037844384,
        0,
        -0.5000000000000002,
        0,
        -0.020000000000000018,
        0.225,
        -0.03464101615137754,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster--0.6/wheel-spoke-2",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 125
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/upper-bearing-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/upper-bearing-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 126
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/upper-guide-lug-0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.12,
        0,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/upper-guide-lug-0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 127
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/upper-guide-lug-0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.12,
        0,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/upper-guide-lug-0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 128
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        -1,
        0,
        1.164033439826574e-15,
        0,
        0,
        1,
        0,
        0,
        -1.164033439826574e-15,
        0,
        -1,
        0,
        0,
        0.275,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "roll-adjuster-0.6"
      },
      "gltfNode": 129
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6/roll-adjustment-stem",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6/roll-adjustment-stem",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 130
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6/adjustment-wheel",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6/adjustment-wheel",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 131
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6/adjustment-wheel-hub",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.2,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6/adjustment-wheel-hub",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 132
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6/wheel-spoke-0",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.04,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6/wheel-spoke-0",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 133
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6/wheel-spoke-1",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.4999999999999998,
        0,
        0.8660254037844388,
        0,
        0,
        1,
        0,
        0,
        -0.8660254037844388,
        0,
        -0.4999999999999998,
        0,
        -0.01999999999999999,
        0.225,
        0.034641016151377546,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6/wheel-spoke-1",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 134
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6/wheel-spoke-2",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.5000000000000002,
        0,
        -0.8660254037844384,
        0,
        0,
        1,
        0,
        0,
        0.8660254037844384,
        0,
        -0.5000000000000002,
        0,
        -0.020000000000000018,
        0.225,
        -0.03464101615137754,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/roll-adjuster-0.6/wheel-spoke-2",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 135
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/upper-roll",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "upper-roll"
      },
      "gltfNode": 136
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/upper-roll/upper-roll-shaft",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/upper-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/upper-roll/upper-roll-shaft",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 137
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/upper-roll/upper-profile-tool",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/upper-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/upper-roll/upper-profile-tool",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill"
      },
      "gltfNode": 138
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2/y02-05-multi-stand-cold-roll-forming-mill:upper_datum",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-2",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.12,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill:upper_datum"
      },
      "gltfNode": 139
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-head-2",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.3999999999999999,
        1.415,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-head-2",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 140
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-3--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.40000000000000036,
        0.51,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-3--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.4,
            "height": 0.4,
            "depth": 0.24,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 141
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-3--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.40000000000000036,
        0.68,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-3--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 142
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-3--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.40000000000000036,
        0.78,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-3--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 143
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-3--0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.28000000000000036,
        1.045,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-3--0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 144
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-3--0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.5200000000000004,
        1.045,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-3--0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 145
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-3-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.40000000000000036,
        0.51,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-3-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.4,
            "height": 0.4,
            "depth": 0.24,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 146
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-3-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.40000000000000036,
        0.68,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-3-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 147
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-3-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.40000000000000036,
        0.78,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-3-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 148
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-3-0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.28000000000000036,
        1.045,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-3-0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 149
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-3-0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.5200000000000004,
        1.045,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-3-0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 150
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-3",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.40000000000000036,
        0.78,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "lower-roll-3"
      },
      "gltfNode": 151
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-3/lower-roll-shaft",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-3",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-3/lower-roll-shaft",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 152
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-3/lower-profile-tool",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-3",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-3/lower-profile-tool",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill"
      },
      "gltfNode": 153
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.40000000000000036,
        1.075,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "upper-stand-3"
      },
      "gltfNode": 154
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/upper-bearing--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/upper-bearing--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 155
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/upper-guide-lug--0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.12,
        0,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/upper-guide-lug--0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 156
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/upper-guide-lug--0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.12,
        0,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/upper-guide-lug--0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 157
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        -1,
        0,
        1.164033439826574e-15,
        0,
        0,
        1,
        0,
        0,
        -1.164033439826574e-15,
        0,
        -1,
        0,
        0,
        0.275,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "roll-adjuster--0.6"
      },
      "gltfNode": 158
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6/roll-adjustment-stem",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6/roll-adjustment-stem",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 159
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6/adjustment-wheel",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6/adjustment-wheel",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 160
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6/adjustment-wheel-hub",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.2,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6/adjustment-wheel-hub",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 161
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6/wheel-spoke-0",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.04,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6/wheel-spoke-0",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 162
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6/wheel-spoke-1",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.4999999999999998,
        0,
        0.8660254037844388,
        0,
        0,
        1,
        0,
        0,
        -0.8660254037844388,
        0,
        -0.4999999999999998,
        0,
        -0.01999999999999999,
        0.225,
        0.034641016151377546,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6/wheel-spoke-1",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 163
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6/wheel-spoke-2",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.5000000000000002,
        0,
        -0.8660254037844384,
        0,
        0,
        1,
        0,
        0,
        0.8660254037844384,
        0,
        -0.5000000000000002,
        0,
        -0.020000000000000018,
        0.225,
        -0.03464101615137754,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster--0.6/wheel-spoke-2",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 164
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/upper-bearing-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/upper-bearing-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 165
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/upper-guide-lug-0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.12,
        0,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/upper-guide-lug-0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 166
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/upper-guide-lug-0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.12,
        0,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/upper-guide-lug-0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 167
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        -1,
        0,
        1.164033439826574e-15,
        0,
        0,
        1,
        0,
        0,
        -1.164033439826574e-15,
        0,
        -1,
        0,
        0,
        0.275,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "roll-adjuster-0.6"
      },
      "gltfNode": 168
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6/roll-adjustment-stem",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6/roll-adjustment-stem",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 169
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6/adjustment-wheel",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6/adjustment-wheel",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 170
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6/adjustment-wheel-hub",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.2,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6/adjustment-wheel-hub",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 171
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6/wheel-spoke-0",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.04,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6/wheel-spoke-0",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 172
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6/wheel-spoke-1",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.4999999999999998,
        0,
        0.8660254037844388,
        0,
        0,
        1,
        0,
        0,
        -0.8660254037844388,
        0,
        -0.4999999999999998,
        0,
        -0.01999999999999999,
        0.225,
        0.034641016151377546,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6/wheel-spoke-1",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 173
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6/wheel-spoke-2",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.5000000000000002,
        0,
        -0.8660254037844384,
        0,
        0,
        1,
        0,
        0,
        0.8660254037844384,
        0,
        -0.5000000000000002,
        0,
        -0.020000000000000018,
        0.225,
        -0.03464101615137754,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/roll-adjuster-0.6/wheel-spoke-2",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 174
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/upper-roll",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "upper-roll"
      },
      "gltfNode": 175
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/upper-roll/upper-roll-shaft",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/upper-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/upper-roll/upper-roll-shaft",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 176
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/upper-roll/upper-profile-tool",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/upper-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-3/upper-roll/upper-profile-tool",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill"
      },
      "gltfNode": 177
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-head-3",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.40000000000000036,
        1.415,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-head-3",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 178
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-4--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.2000000000000002,
        0.51,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-4--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.4,
            "height": 0.4,
            "depth": 0.24,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 179
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-4--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.2000000000000002,
        0.68,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-4--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 180
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-4--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.2000000000000002,
        0.78,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-4--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 181
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-4--0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.08,
        1.045,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-4--0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 182
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-4--0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3200000000000003,
        1.045,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-4--0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 183
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-4-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.2000000000000002,
        0.51,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-4-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.4,
            "height": 0.4,
            "depth": 0.24,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 184
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-4-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.2000000000000002,
        0.68,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-4-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 185
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-4-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.2000000000000002,
        0.78,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-4-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 186
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-4-0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.08,
        1.045,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-4-0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 187
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-4-0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3200000000000003,
        1.045,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-4-0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 188
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-4",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.2000000000000002,
        0.78,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "lower-roll-4"
      },
      "gltfNode": 189
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-4/lower-roll-shaft",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-4",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-4/lower-roll-shaft",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 190
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-4/lower-profile-tool",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-4",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-4/lower-profile-tool",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill"
      },
      "gltfNode": 191
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.2000000000000002,
        1.075,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "upper-stand-4"
      },
      "gltfNode": 192
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/upper-bearing--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/upper-bearing--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 193
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/upper-guide-lug--0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.12,
        0,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/upper-guide-lug--0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 194
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/upper-guide-lug--0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.12,
        0,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/upper-guide-lug--0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 195
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        -1,
        0,
        1.164033439826574e-15,
        0,
        0,
        1,
        0,
        0,
        -1.164033439826574e-15,
        0,
        -1,
        0,
        0,
        0.275,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "roll-adjuster--0.6"
      },
      "gltfNode": 196
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6/roll-adjustment-stem",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6/roll-adjustment-stem",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 197
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6/adjustment-wheel",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6/adjustment-wheel",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 198
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6/adjustment-wheel-hub",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.2,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6/adjustment-wheel-hub",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 199
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6/wheel-spoke-0",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.04,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6/wheel-spoke-0",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 200
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6/wheel-spoke-1",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.4999999999999998,
        0,
        0.8660254037844388,
        0,
        0,
        1,
        0,
        0,
        -0.8660254037844388,
        0,
        -0.4999999999999998,
        0,
        -0.01999999999999999,
        0.225,
        0.034641016151377546,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6/wheel-spoke-1",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 201
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6/wheel-spoke-2",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.5000000000000002,
        0,
        -0.8660254037844384,
        0,
        0,
        1,
        0,
        0,
        0.8660254037844384,
        0,
        -0.5000000000000002,
        0,
        -0.020000000000000018,
        0.225,
        -0.03464101615137754,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster--0.6/wheel-spoke-2",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 202
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/upper-bearing-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/upper-bearing-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 203
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/upper-guide-lug-0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.12,
        0,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/upper-guide-lug-0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 204
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/upper-guide-lug-0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.12,
        0,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/upper-guide-lug-0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 205
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        -1,
        0,
        1.164033439826574e-15,
        0,
        0,
        1,
        0,
        0,
        -1.164033439826574e-15,
        0,
        -1,
        0,
        0,
        0.275,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "roll-adjuster-0.6"
      },
      "gltfNode": 206
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6/roll-adjustment-stem",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6/roll-adjustment-stem",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 207
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6/adjustment-wheel",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6/adjustment-wheel",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 208
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6/adjustment-wheel-hub",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.2,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6/adjustment-wheel-hub",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 209
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6/wheel-spoke-0",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.04,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6/wheel-spoke-0",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 210
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6/wheel-spoke-1",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.4999999999999998,
        0,
        0.8660254037844388,
        0,
        0,
        1,
        0,
        0,
        -0.8660254037844388,
        0,
        -0.4999999999999998,
        0,
        -0.01999999999999999,
        0.225,
        0.034641016151377546,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6/wheel-spoke-1",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 211
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6/wheel-spoke-2",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.5000000000000002,
        0,
        -0.8660254037844384,
        0,
        0,
        1,
        0,
        0,
        0.8660254037844384,
        0,
        -0.5000000000000002,
        0,
        -0.020000000000000018,
        0.225,
        -0.03464101615137754,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/roll-adjuster-0.6/wheel-spoke-2",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 212
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/upper-roll",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "upper-roll"
      },
      "gltfNode": 213
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/upper-roll/upper-roll-shaft",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/upper-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/upper-roll/upper-roll-shaft",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 214
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/upper-roll/upper-profile-tool",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/upper-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-4/upper-roll/upper-profile-tool",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill"
      },
      "gltfNode": 215
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-head-4",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.2000000000000002,
        1.415,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-head-4",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 216
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-5--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2,
        0.51,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-5--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.4,
            "height": 0.4,
            "depth": 0.24,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 217
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-5--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2,
        0.68,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-5--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 218
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-5--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2,
        0.78,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-5--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 219
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-5--0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.88,
        1.045,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-5--0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 220
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-5--0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.12,
        1.045,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-5--0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 221
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-5-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2,
        0.51,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-pedestal-5-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.4,
            "height": 0.4,
            "depth": 0.24,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 222
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-5-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2,
        0.68,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-seat-5-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 223
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-5-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2,
        0.78,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-bearing-5-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 224
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-5-0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.88,
        1.045,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-5-0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 225
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-5-0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.12,
        1.045,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-5-0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 226
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-5",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2,
        0.78,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "lower-roll-5"
      },
      "gltfNode": 227
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-5/lower-roll-shaft",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-5",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-5/lower-roll-shaft",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 228
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-5/lower-profile-tool",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-5",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/lower-roll-5/lower-profile-tool",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill"
      },
      "gltfNode": 229
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2,
        1.075,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "upper-stand-5"
      },
      "gltfNode": 230
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/upper-bearing--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/upper-bearing--0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 231
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/upper-guide-lug--0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.12,
        0,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/upper-guide-lug--0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 232
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/upper-guide-lug--0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.12,
        0,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/upper-guide-lug--0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 233
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        -1,
        0,
        1.164033439826574e-15,
        0,
        0,
        1,
        0,
        0,
        -1.164033439826574e-15,
        0,
        -1,
        0,
        0,
        0.275,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "roll-adjuster--0.6"
      },
      "gltfNode": 234
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6/roll-adjustment-stem",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6/roll-adjustment-stem",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 235
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6/adjustment-wheel",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6/adjustment-wheel",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 236
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6/adjustment-wheel-hub",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.2,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6/adjustment-wheel-hub",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 237
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6/wheel-spoke-0",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.04,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6/wheel-spoke-0",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 238
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6/wheel-spoke-1",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.4999999999999998,
        0,
        0.8660254037844388,
        0,
        0,
        1,
        0,
        0,
        -0.8660254037844388,
        0,
        -0.4999999999999998,
        0,
        -0.01999999999999999,
        0.225,
        0.034641016151377546,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6/wheel-spoke-1",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 239
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6/wheel-spoke-2",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.5000000000000002,
        0,
        -0.8660254037844384,
        0,
        0,
        1,
        0,
        0,
        0.8660254037844384,
        0,
        -0.5000000000000002,
        0,
        -0.020000000000000018,
        0.225,
        -0.03464101615137754,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster--0.6/wheel-spoke-2",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 240
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/upper-bearing-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/upper-bearing-0.6",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 241
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/upper-guide-lug-0.6--0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.12,
        0,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/upper-guide-lug-0.6--0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 242
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/upper-guide-lug-0.6-0.12",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.12,
        0,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/upper-guide-lug-0.6-0.12",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 243
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        -1,
        0,
        1.164033439826574e-15,
        0,
        0,
        1,
        0,
        0,
        -1.164033439826574e-15,
        0,
        -1,
        0,
        0,
        0.275,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "roll-adjuster-0.6"
      },
      "gltfNode": 244
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6/roll-adjustment-stem",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6/roll-adjustment-stem",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 245
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6/adjustment-wheel",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6/adjustment-wheel",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 246
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6/adjustment-wheel-hub",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.2,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6/adjustment-wheel-hub",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 247
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6/wheel-spoke-0",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.04,
        0.225,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6/wheel-spoke-0",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 248
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6/wheel-spoke-1",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.4999999999999998,
        0,
        0.8660254037844388,
        0,
        0,
        1,
        0,
        0,
        -0.8660254037844388,
        0,
        -0.4999999999999998,
        0,
        -0.01999999999999999,
        0.225,
        0.034641016151377546,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6/wheel-spoke-1",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 249
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6/wheel-spoke-2",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.5000000000000002,
        0,
        -0.8660254037844384,
        0,
        0,
        1,
        0,
        0,
        0.8660254037844384,
        0,
        -0.5000000000000002,
        0,
        -0.020000000000000018,
        0.225,
        -0.03464101615137754,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/roll-adjuster-0.6/wheel-spoke-2",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "handle",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 0.018,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 250
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/upper-roll",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "upper-roll"
      },
      "gltfNode": 251
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/upper-roll/upper-roll-shaft",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/upper-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/upper-roll/upper-roll-shaft",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 252
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/upper-roll/upper-profile-tool",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/upper-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/upper-stand-5/upper-roll/upper-profile-tool",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill"
      },
      "gltfNode": 253
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-head-5",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2,
        1.415,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/stand-guide-head-5",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 254
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/preview-flat-stock",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.8,
        0.902,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/preview-flat-stock",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.8,
            "height": 0.004,
            "depth": 0.48,
            "radius": 0.0018000000000000002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 255
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/preview-formed-flange--0.24",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.8,
        0.96,
        -0.24,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/preview-formed-flange--0.24",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.8,
            "height": 0.12,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 256
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/preview-formed-flange-0.24",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.8,
        0.96,
        0.24,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/preview-formed-flange-0.24",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.8,
            "height": 0.12,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 257
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/preview-formed-web",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.8,
        0.902,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/preview-formed-web",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.8,
            "height": 0.004,
            "depth": 0.48,
            "radius": 0.0018000000000000002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 258
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/feed-table-leg--2.9--0.36",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.9,
        0.55,
        -0.36,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/feed-table-leg--2.9--0.36",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.58,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 259
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/feed-table-leg--2.9-0.36",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.9,
        0.55,
        0.36,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/feed-table-leg--2.9-0.36",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.58,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 260
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/feed-table-leg-2.9--0.36",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.9,
        0.55,
        -0.36,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/feed-table-leg-2.9--0.36",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.58,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 261
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/feed-table-leg-2.9-0.36",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.9,
        0.55,
        0.36,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/feed-table-leg-2.9-0.36",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.58,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 262
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/feed-table-top--2.9",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.9,
        0.85,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/feed-table-top--2.9",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.9,
            "height": 0.06,
            "depth": 0.8,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 263
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/feed-table-top-2.9",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.9,
        0.85,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/feed-table-top-2.9",
        "assetId": "y02-05-multi-stand-cold-roll-forming-mill",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.9,
            "height": 0.06,
            "depth": 0.8,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 264
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/y02-05-multi-stand-cold-roll-forming-mill:stock_in",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        1,
        0,
        0,
        1,
        0,
        0,
        -1,
        0,
        2.220446049250313e-16,
        0,
        -3.2,
        0.902,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill:stock_in"
      },
      "gltfNode": 265
    },
    {
      "id": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base/y02-05-multi-stand-cold-roll-forming-mill:profile_out",
      "parent": "y02-05-multi-stand-cold-roll-forming-mill/y02-05-multi-stand-cold-roll-forming-mill:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        -1,
        0,
        0,
        1,
        0,
        0,
        1,
        0,
        2.220446049250313e-16,
        0,
        3.2,
        0.902,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y02-05-multi-stand-cold-roll-forming-mill:profile_out"
      },
      "gltfNode": 266
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "전체 치수·기구 비례 자체 설계. 제조사 CAD·성능·인증 근거 아님."
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "accessed_on": "2026-10-24",
      "title": "Bradbury roll former configurations",
      "url": "https://www.bradburygroup.com/bradbury-group-roll-formers",
      "basis": "스탠드·축·롤 툴링과 교환식 서브플레이트의 분해 원리만 참고. 정격·치수·성형 성능 인용 없음."
    }
  ],
  "rights": {
    "id": "y02-05-multi-stand-cold-roll-forming-mill",
    "assetTypeId": "y02-05-multi-stand-cold-roll-forming-mill",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:c571b89d6b864e33daec7a89e06a38d72f1ac3bb255a4e91ddc883890dd68dc9",
    "modelSource": "kit/models/y02-05-multi-stand-cold-roll-forming-mill.mjs",
    "dslExampleSource": "dsl/models/y02-05-multi-stand-cold-roll-forming-mill.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/y02-05-multi-stand-cold-roll-forming-mill.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/y02-05-multi-stand-cold-roll-forming-mill.txt",
      "sha256": "sha256:85bb18ec318395f6d5e052d1e790f2c651f4ccd79ba92d3de02cf07c54be8e30",
      "bytes": 823
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/y02-05-multi-stand-cold-roll-forming-mill/model.glb",
      "bytes": 1065416,
      "sha256": "sha256:cb728730ae4e29d7f3f852a2548d780da8298942dd07592b3a06b850ddd9dff6"
    },
    "licenses": [
      {
        "path": "open-assets/y02-05-multi-stand-cold-roll-forming-mill/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/y02-05-multi-stand-cold-roll-forming-mill/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/y02-05-multi-stand-cold-roll-forming-mill/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/y02-05-multi-stand-cold-roll-forming-mill/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/y02-05-multi-stand-cold-roll-forming-mill/LICENSES/ASSET-NOTICES/y02-05-multi-stand-cold-roll-forming-mill.txt",
        "bytes": 823,
        "sha256": "sha256:85bb18ec318395f6d5e052d1e790f2c651f4ccd79ba92d3de02cf07c54be8e30"
      }
    ],
    "source": {
      "path": "kit/models/y02-05-multi-stand-cold-roll-forming-mill.mjs",
      "bytes": 311163,
      "sha256": "sha256:c571b89d6b864e33daec7a89e06a38d72f1ac3bb255a4e91ddc883890dd68dc9"
    },
    "ds2": {
      "path": "dsl/models/y02-05-multi-stand-cold-roll-forming-mill.ds2",
      "bytes": 3182,
      "sha256": "sha256:fe4befd313f84e879e47598f8f62ed40de5157b108e1e1f04754c859703c88bb",
      "scope": "DISPLAY_PREVIEW"
    },
    "motionProfile": {
      "path": "presentation/motion-profiles/models/y02-05-multi-stand-cold-roll-forming-mill.json",
      "bytes": 9244,
      "sha256": "sha256:36ff58540c7bad80fd79db0e464dc834b402ac06b0cfc7e277e7150cfe5bdb59",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "VERIFIED_SAMPLED_TRAJECTORY",
      "reason": "SOURCE_BOUND_SAMPLED_PATH",
      "automaticPlayback": true,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN",
    "motionProfileSha256": "sha256:36ff58540c7bad80fd79db0e464dc834b402ac06b0cfc7e277e7150cfe5bdb59",
    "compositeDurationMs": 3000
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 267,
    "triangles": 73204,
    "maxMatrixError": 3.3306690738754696e-16,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 12,
    "nodeComparisons": 3204,
    "semanticFrameComparisons": 60,
    "acceptanceCases": 5,
    "acceptanceFrameComparisons": 20,
    "maxMotionMatrixError": 3.3306690738754696e-16
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "y02-05-multi-stand-cold-roll-forming-mill",
    "kind": "equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "Y 뿌리산업 공정",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "stock_in": {
        "frameId": "stock_in",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -3.2,
            0.902,
            0
          ],
          "quaternion": [
            0,
            -0.7071067811865475,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "profile_out": {
        "frameId": "profile_out",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            3.2,
            0.902,
            0
          ],
          "quaternion": [
            0,
            0.7071067811865475,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "roll_marker": {
        "frameId": "roll_marker",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -0.29999999999999993,
            0.78,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "upper_datum": {
        "frameId": "upper_datum",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -0.3999999999999999,
            0.955,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
