{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "w02-02-flexo-folder-gluer-rotary-diecutter",
  "assetTypeId": "w02-02-flexo-folder-gluer-rotary-diecutter",
  "label": "플렉소 프린터 슬로터 다이커터",
  "category": "W 제지 인쇄와 포장재",
  "description": "2개 플렉소 인쇄 유닛, 회전 다이·슬로터와 접착·접힘·압착 배출을 +X 방향으로 분리한 라인.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -5.199999809265137,
      -7.450580569168253e-10,
      -1.600000023841858
    ],
    "max": [
      5.199999809265137,
      1.550000010728836,
      1.600000023841858
    ]
  },
  "size": [
    10.399999618530273,
    1.550000011473894,
    3.200000047683716
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 65,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 0,
      "blindSocketHeads": 0,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 60,
    "warnings": [],
    "changedMeshes": 65,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 85900,
      "afterTriangles": 71116,
      "reachedTarget": true,
      "changedMeshes": 22,
      "changes": [
        {
          "meshes": [
            "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0/flexo-plate--0.35",
            "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0/flexo-plate-0",
            "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0/flexo-plate-0.35",
            "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1/flexo-plate--0.35",
            "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1/flexo-plate-0",
            "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1/flexo-plate-0.35"
          ],
          "radiusM": 0.0036000000000000003,
          "dimensionsM": [
            0.1,
            0.008,
            0.22
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die/axial-rule--1",
            "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die/axial-rule-1"
          ],
          "radiusM": 0.0054,
          "dimensionsM": [
            0.012,
            0.014,
            0.8
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--4.3--0.85",
            "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--4.3-0.85",
            "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--2.8--0.85",
            "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--2.8-0.85",
            "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--1.3--0.85",
            "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--1.3-0.85",
            "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-0.2--0.85",
            "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-0.2-0.85",
            "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-1.7--0.85",
            "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-1.7-0.85",
            "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-3.2--0.85",
            "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-3.2-0.85",
            "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-4.3--0.85",
            "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-4.3-0.85"
          ],
          "radiusM": 0.006,
          "dimensionsM": [
            0.12,
            0.655,
            0.12
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        }
      ],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/w02-02-flexo-folder-gluer-rotary-diecutter.mjs",
    "sourceSha256": "sha256:de42b2902321356501b7ea94c3fbefccca55dda6a9e6646a66f6ee77729c1a38",
    "deliverySha256": "sha256:de42b2902321356501b7ea94c3fbefccca55dda6a9e6646a66f6ee77729c1a38",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:e9f1d4735682d325fc0aa98f90ff102b6ffbaf7f8a62d8ac151ad397e8f48a9e",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:e9f1d4735682d325fc0aa98f90ff102b6ffbaf7f8a62d8ac151ad397e8f48a9e",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [],
  "parameterValues": {},
  "joints": [
    {
      "id": "drive",
      "label": "인쇄·절단 기준축 Z",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "unit": "rad",
      "min": -6.283185307179586,
      "max": 6.283185307179586,
      "initial": 0
    }
  ],
  "initialState": {
    "drive": 0
  },
  "bindings": [
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -3.1,
        1.25,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0",
      "gltfNode": 19
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -3.1,
        0.75,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-0",
      "gltfNode": 30
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -3.46,
        1.25,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 2.272727272727273,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-0",
      "gltfNode": 35
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -1.9,
        1.25,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1",
      "gltfNode": 45
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -1.9,
        0.75,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-1",
      "gltfNode": 55
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -2.26,
        1.25,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 2.272727272727273,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-1",
      "gltfNode": 60
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -0.65,
        1.22,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1.1363636363636365,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die",
      "gltfNode": 70
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -0.65,
        0.78,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1.1363636363636365,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/die-anvil",
      "gltfNode": 82
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0.35,
        1.16,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1.5625,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter",
      "gltfNode": 87
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0.35,
        0.84,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1.5625,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter-anvil",
      "gltfNode": 98
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -4.4,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.4",
      "gltfNode": 103
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -4.1,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.1",
      "gltfNode": 108
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -3.8,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--3.8",
      "gltfNode": 113
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0.85,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-0.85",
      "gltfNode": 118
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        1.1,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.1",
      "gltfNode": 123
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        1.35,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.35",
      "gltfNode": 128
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        1.6,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.6",
      "gltfNode": 133
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        1.85,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.85",
      "gltfNode": 138
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        2.1,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.1",
      "gltfNode": 143
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        2.35,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.35",
      "gltfNode": 148
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        2.6,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.6",
      "gltfNode": 153
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        2.85,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.85",
      "gltfNode": 158
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        3.1,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.1",
      "gltfNode": 163
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        3.35,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.35",
      "gltfNode": 168
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        3.6,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.6",
      "gltfNode": 173
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        3.85,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.85",
      "gltfNode": 178
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        4.1,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-4.1",
      "gltfNode": 183
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        3.35,
        1.08,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.35",
      "gltfNode": 188
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        3.6,
        1.08,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.6",
      "gltfNode": 195
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        3.85,
        1.08,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.85",
      "gltfNode": 202
    }
  ],
  "jointBindings": [
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -3.1,
        1.25,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0",
      "gltfNode": 19
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -3.1,
        0.75,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-0",
      "gltfNode": 30
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -3.46,
        1.25,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 2.272727272727273,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-0",
      "gltfNode": 35
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -1.9,
        1.25,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1",
      "gltfNode": 45
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -1.9,
        0.75,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-1",
      "gltfNode": 55
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -2.26,
        1.25,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 2.272727272727273,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-1",
      "gltfNode": 60
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -0.65,
        1.22,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1.1363636363636365,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die",
      "gltfNode": 70
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -0.65,
        0.78,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1.1363636363636365,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/die-anvil",
      "gltfNode": 82
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0.35,
        1.16,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1.5625,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter",
      "gltfNode": 87
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0.35,
        0.84,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1.5625,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter-anvil",
      "gltfNode": 98
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -4.4,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.4",
      "gltfNode": 103
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -4.1,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.1",
      "gltfNode": 108
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -3.8,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--3.8",
      "gltfNode": 113
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0.85,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-0.85",
      "gltfNode": 118
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        1.1,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.1",
      "gltfNode": 123
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        1.35,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.35",
      "gltfNode": 128
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        1.6,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.6",
      "gltfNode": 133
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        1.85,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.85",
      "gltfNode": 138
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        2.1,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.1",
      "gltfNode": 143
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        2.35,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.35",
      "gltfNode": 148
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        2.6,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.6",
      "gltfNode": 153
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        2.85,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.85",
      "gltfNode": 158
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        3.1,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.1",
      "gltfNode": 163
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        3.35,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.35",
      "gltfNode": 168
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        3.6,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.6",
      "gltfNode": 173
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        3.85,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.85",
      "gltfNode": 178
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        4.1,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-4.1",
      "gltfNode": 183
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        3.35,
        1.08,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.35",
      "gltfNode": 188
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        3.6,
        1.08,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.6",
      "gltfNode": 195
    },
    {
      "id": "drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        3.85,
        1.08,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -4.166666666666667,
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.85",
      "gltfNode": 202
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "print_axis": {
      "id": "print_axis",
      "node": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0/w02-02-flexo-folder-gluer-rotary-diecutter:print_axis",
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0/w02-02-flexo-folder-gluer-rotary-diecutter:print_axis",
      "gltfNode": 25,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.1,
        1.25,
        0,
        1
      ],
      "position": [
        -3.1,
        1.25,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "die_axis": {
      "id": "die_axis",
      "node": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die/w02-02-flexo-folder-gluer-rotary-diecutter:die_axis",
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die/w02-02-flexo-folder-gluer-rotary-diecutter:die_axis",
      "gltfNode": 77,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.65,
        1.22,
        0,
        1
      ],
      "position": [
        -0.65,
        1.22,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "slotter_axis": {
      "id": "slotter_axis",
      "node": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter/w02-02-flexo-folder-gluer-rotary-diecutter:slotter_axis",
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter/w02-02-flexo-folder-gluer-rotary-diecutter:slotter_axis",
      "gltfNode": 93,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.35,
        1.16,
        0,
        1
      ],
      "position": [
        0.35,
        1.16,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "glue_supply": {
      "id": "glue_supply",
      "node": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/w02-02-flexo-folder-gluer-rotary-diecutter:glue_supply",
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/w02-02-flexo-folder-gluer-rotary-diecutter:glue_supply",
      "gltfNode": 227,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0.72,
        1.55,
        0.4,
        1
      ],
      "position": [
        0.72,
        1.55,
        0.4
      ],
      "quaternion": [
        -0.7071067811865475,
        0,
        0,
        0.7071067811865476
      ]
    },
    "infeed": {
      "id": "infeed",
      "node": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/w02-02-flexo-folder-gluer-rotary-diecutter:infeed",
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/w02-02-flexo-folder-gluer-rotary-diecutter:infeed",
      "gltfNode": 229,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -4.5,
        1,
        0,
        1
      ],
      "position": [
        -4.5,
        1,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "outfeed": {
      "id": "outfeed",
      "node": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/w02-02-flexo-folder-gluer-rotary-diecutter:outfeed",
      "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/w02-02-flexo-folder-gluer-rotary-diecutter:outfeed",
      "gltfNode": 230,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        4.2,
        1,
        0,
        1
      ],
      "position": [
        4.2,
        1,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    }
  },
  "ports": {
    "mount": "base",
    "infeed": "infeed",
    "outfeed": "outfeed",
    "print_axis": "print_axis",
    "die_axis": "die_axis",
    "slotter_axis": "slotter_axis",
    "glue_supply": "glue_supply"
  },
  "nodes": [
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 65,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 0,
            "blindSocketHeads": 0,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 60,
          "warnings": [],
          "changedMeshes": 65,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 85900,
            "afterTriangles": 71116,
            "reachedTarget": true,
            "changedMeshes": 22,
            "changes": [
              {
                "meshes": [
                  "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0/flexo-plate--0.35",
                  "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0/flexo-plate-0",
                  "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0/flexo-plate-0.35",
                  "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1/flexo-plate--0.35",
                  "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1/flexo-plate-0",
                  "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1/flexo-plate-0.35"
                ],
                "radiusM": 0.0036000000000000003,
                "dimensionsM": [
                  0.1,
                  0.008,
                  0.22
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die/axial-rule--1",
                  "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die/axial-rule-1"
                ],
                "radiusM": 0.0054,
                "dimensionsM": [
                  0.012,
                  0.014,
                  0.8
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--4.3--0.85",
                  "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--4.3-0.85",
                  "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--2.8--0.85",
                  "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--2.8-0.85",
                  "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--1.3--0.85",
                  "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--1.3-0.85",
                  "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-0.2--0.85",
                  "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-0.2-0.85",
                  "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-1.7--0.85",
                  "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-1.7-0.85",
                  "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-3.2--0.85",
                  "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-3.2-0.85",
                  "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-4.3--0.85",
                  "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-4.3-0.85"
                ],
                "radiusM": 0.006,
                "dimensionsM": [
                  0.12,
                  0.655,
                  0.12
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              }
            ],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "w02-02-flexo-folder-gluer-rotary-diecutter",
          "coordinate_profile": "lib3d-world/1",
          "label": "플렉소 인쇄·슬로터·다이커터 라인",
          "category": "골판지·인쇄 접힘 접착",
          "summary": "2개 플렉소 인쇄 유닛, 회전 다이·슬로터와 접착·접힘·압착 배출을 +X 방향으로 분리한 라인.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [],
          "joints": [
            {
              "id": "drive",
              "label": "인쇄·절단 기준축 Z",
              "kind": "revolute",
              "axis": [
                0,
                0,
                1
              ],
              "unit": "rad",
              "min": -6.283185307179586,
              "max": 6.283185307179586,
              "initial": 0
            }
          ],
          "ports": {
            "mount": "base",
            "infeed": "infeed",
            "outfeed": "outfeed",
            "print_axis": "print_axis",
            "die_axis": "die_axis",
            "slotter_axis": "slotter_axis",
            "glue_supply": "glue_supply"
          },
          "required_host_features": [
            "revolute"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "전체 치수·기구 비례 자체 설계. 성능·제조사 인증을 뜻하지 않음."
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "BOBST FFG 8.20 EXPERT",
              "url": "https://www.bobst.com/na/en/products/flexo-printing-folding-gluing/ffg-8-20-expert",
              "accessed_on": "2026-10-24",
              "basis": "플렉소 인쇄·회전 다이·접힘 접착의 공정 구분 참고. 2색 자체 배치와 모든 치수는 설명용 설계."
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {},
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
          "print_axis": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0/w02-02-flexo-folder-gluer-rotary-diecutter:print_axis",
          "die_axis": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die/w02-02-flexo-folder-gluer-rotary-diecutter:die_axis",
          "slotter_axis": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter/w02-02-flexo-folder-gluer-rotary-diecutter:slotter_axis",
          "glue_supply": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/w02-02-flexo-folder-gluer-rotary-diecutter:glue_supply",
          "infeed": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/w02-02-flexo-folder-gluer-rotary-diecutter:infeed",
          "outfeed": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/w02-02-flexo-folder-gluer-rotary-diecutter:outfeed"
        },
        "jointBindings": [
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              -3.1,
              1.25,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": -1,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              -3.1,
              0.75,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-0"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              -3.46,
              1.25,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 2.272727272727273,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-0"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              -1.9,
              1.25,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": -1,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              -1.9,
              0.75,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-1"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              -2.26,
              1.25,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 2.272727272727273,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-1"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              -0.65,
              1.22,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": -1.1363636363636365,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              -0.65,
              0.78,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1.1363636363636365,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/die-anvil"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0.35,
              1.16,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": -1.5625,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0.35,
              0.84,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1.5625,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter-anvil"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              -4.4,
              0.94,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 4.166666666666667,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.4"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              -4.1,
              0.94,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 4.166666666666667,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.1"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              -3.8,
              0.94,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 4.166666666666667,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--3.8"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0.85,
              0.94,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 4.166666666666667,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-0.85"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              1.1,
              0.94,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 4.166666666666667,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.1"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              1.35,
              0.94,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 4.166666666666667,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.35"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              1.6,
              0.94,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 4.166666666666667,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.6"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              1.85,
              0.94,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 4.166666666666667,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.85"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              2.1,
              0.94,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 4.166666666666667,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.1"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              2.35,
              0.94,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 4.166666666666667,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.35"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              2.6,
              0.94,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 4.166666666666667,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.6"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              2.85,
              0.94,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 4.166666666666667,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.85"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              3.1,
              0.94,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 4.166666666666667,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.1"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              3.35,
              0.94,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 4.166666666666667,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.35"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              3.6,
              0.94,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 4.166666666666667,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.6"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              3.85,
              0.94,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 4.166666666666667,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.85"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              4.1,
              0.94,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 4.166666666666667,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-4.1"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              3.35,
              1.08,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": -4.166666666666667,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.35"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              3.6,
              1.08,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": -4.166666666666667,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.6"
          },
          {
            "id": "drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              3.85,
              1.08,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": -4.166666666666667,
            "nodeName": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.85"
          }
        ],
        "joints": [
          {
            "id": "drive",
            "label": "인쇄·절단 기준축 Z",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "unit": "rad",
            "min": -6.283185307179586,
            "max": 6.283185307179586,
            "initial": 0,
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 101
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "전체 치수·기구 비례 자체 설계. 성능·제조사 인증을 뜻하지 않음."
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "BOBST FFG 8.20 EXPERT",
            "url": "https://www.bobst.com/na/en/products/flexo-printing-folding-gluing/ffg-8-20-expert",
            "accessed_on": "2026-10-24",
            "basis": "플렉소 인쇄·회전 다이·접힘 접착의 공정 구분 참고. 2색 자체 배치와 모든 치수는 설명용 설계."
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "drive": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter:base"
      },
      "gltfNode": 1
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/foundation",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.05,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/foundation",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 2
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-base--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.84,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-base--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 9.3,
            "height": 0.17,
            "depth": 0.14,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 3
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-base-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.84,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-base-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 9.3,
            "height": 0.17,
            "depth": 0.14,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 4
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--4.3--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -4.3,
        0.4275,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--4.3--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.655,
            "depth": 0.12,
            "radius": 0.006,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 5
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--4.3-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -4.3,
        0.4275,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--4.3-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.655,
            "depth": 0.12,
            "radius": 0.006,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 6
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--2.8--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.8,
        0.4275,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--2.8--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.655,
            "depth": 0.12,
            "radius": 0.006,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 7
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--2.8-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.8,
        0.4275,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--2.8-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.655,
            "depth": 0.12,
            "radius": 0.006,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 8
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--1.3--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3,
        0.4275,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--1.3--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.655,
            "depth": 0.12,
            "radius": 0.006,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 9
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--1.3-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3,
        0.4275,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg--1.3-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.655,
            "depth": 0.12,
            "radius": 0.006,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 10
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-0.2--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.2,
        0.4275,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-0.2--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.655,
            "depth": 0.12,
            "radius": 0.006,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 11
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-0.2-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.2,
        0.4275,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-0.2-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.655,
            "depth": 0.12,
            "radius": 0.006,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 12
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-1.7--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.7,
        0.4275,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-1.7--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.655,
            "depth": 0.12,
            "radius": 0.006,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 13
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-1.7-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.7,
        0.4275,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-1.7-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.655,
            "depth": 0.12,
            "radius": 0.006,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 14
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-3.2--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.2,
        0.4275,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-3.2--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.655,
            "depth": 0.12,
            "radius": 0.006,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 15
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-3.2-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.2,
        0.4275,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-3.2-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.655,
            "depth": 0.12,
            "radius": 0.006,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 16
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-4.3--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        4.3,
        0.4275,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-4.3--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.655,
            "depth": 0.12,
            "radius": 0.006,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 17
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-4.3-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        4.3,
        0.4275,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/line-leg-4.3-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.655,
            "depth": 0.12,
            "radius": 0.006,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 18
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.1,
        1.25,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "print-0"
      },
      "gltfNode": 19
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 20
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 21
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0/flexo-plate--0.35",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.246,
        -0.35,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0/flexo-plate--0.35",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.008,
            "depth": 0.22,
            "radius": 0.0036000000000000003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 22
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0/flexo-plate-0",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.246,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0/flexo-plate-0",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.008,
            "depth": 0.22,
            "radius": 0.0036000000000000003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 23
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0/flexo-plate-0.35",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.246,
        0.35,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0/flexo-plate-0.35",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.008,
            "depth": 0.22,
            "radius": 0.0036000000000000003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 24
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0/w02-02-flexo-folder-gluer-rotary-diecutter:print_axis",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter:print_axis"
      },
      "gltfNode": 25
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.1,
        1.25,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 26
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0-bearing-post--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.1,
        1.075,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0-bearing-post--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.35,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 27
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.1,
        1.25,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 28
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0-bearing-post-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.1,
        1.075,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-0-bearing-post-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.35,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 29
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-0",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.1,
        0.75,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "impression-0"
      },
      "gltfNode": 30
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-0/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-0",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-0/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 31
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-0/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-0",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-0/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 32
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-0-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.1,
        0.75,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-0-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 33
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-0-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.1,
        0.75,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-0-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 34
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-0",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.46,
        1.25,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "anilox-0"
      },
      "gltfNode": 35
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-0/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-0",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-0/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 36
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-0/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-0",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-0/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 37
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-0-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.46,
        1.25,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-0-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 38
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-0-bearing-post--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.46,
        1.075,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-0-bearing-post--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.35,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 39
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-0-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.46,
        1.25,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-0-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 40
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-0-bearing-post-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.46,
        1.075,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-0-bearing-post-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.35,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 41
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/doctor-chamber-0",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.64,
        1.25,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/doctor-chamber-0",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.13,
            "height": 0.15,
            "depth": 1.35,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 42
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/doctor-support-0--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.58,
        1.25,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/doctor-support-0--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.26,
            "height": 0.08,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 2,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00002,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 43
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/doctor-support-0-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.58,
        1.25,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/doctor-support-0-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.26,
            "height": 0.08,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 2,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00002,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 44
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.9,
        1.25,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "print-1"
      },
      "gltfNode": 45
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 46
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 47
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1/flexo-plate--0.35",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.246,
        -0.35,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1/flexo-plate--0.35",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.008,
            "depth": 0.22,
            "radius": 0.0036000000000000003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 48
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1/flexo-plate-0",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.246,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1/flexo-plate-0",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.008,
            "depth": 0.22,
            "radius": 0.0036000000000000003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 49
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1/flexo-plate-0.35",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.246,
        0.35,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1/flexo-plate-0.35",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.008,
            "depth": 0.22,
            "radius": 0.0036000000000000003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 50
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.9,
        1.25,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 51
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1-bearing-post--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.9,
        1.075,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1-bearing-post--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.35,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 52
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.9,
        1.25,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 53
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1-bearing-post-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.9,
        1.075,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/print-1-bearing-post-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.35,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 54
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-1",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.9,
        0.75,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "impression-1"
      },
      "gltfNode": 55
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-1/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-1/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 56
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-1/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-1/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 57
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-1-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.9,
        0.75,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-1-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 58
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-1-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.9,
        0.75,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/impression-1-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 59
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-1",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.26,
        1.25,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "anilox-1"
      },
      "gltfNode": 60
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-1/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-1/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 61
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-1/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-1/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 62
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-1-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.26,
        1.25,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-1-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 63
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-1-bearing-post--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.26,
        1.075,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-1-bearing-post--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.35,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 64
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-1-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.26,
        1.25,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-1-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 65
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-1-bearing-post-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.26,
        1.075,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/anilox-1-bearing-post-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.35,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 66
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/doctor-chamber-1",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.44,
        1.25,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/doctor-chamber-1",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.13,
            "height": 0.15,
            "depth": 1.35,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 67
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/doctor-support-1--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.38,
        1.25,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/doctor-support-1--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.26,
            "height": 0.08,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 2,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00002,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 68
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/doctor-support-1-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.38,
        1.25,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/doctor-support-1-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.26,
            "height": 0.08,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 2,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00002,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 69
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.65,
        1.22,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "rotary-die"
      },
      "gltfNode": 70
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 71
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 72
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die/die-rule--0.4",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.4,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die/die-rule--0.4",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 73
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die/die-rule-0.4",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.4,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die/die-rule-0.4",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 74
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die/axial-rule--1",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.218,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die/axial-rule--1",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.014,
            "depth": 0.8,
            "radius": 0.0054,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 75
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die/axial-rule-1",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.218,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die/axial-rule-1",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.014,
            "depth": 0.8,
            "radius": 0.0054,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 76
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die/w02-02-flexo-folder-gluer-rotary-diecutter:die_axis",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter:die_axis"
      },
      "gltfNode": 77
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.65,
        1.22,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 78
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die-bearing-post--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.65,
        1.06,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die-bearing-post--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.31999999999999995,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 79
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.65,
        1.22,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 80
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die-bearing-post-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.65,
        1.06,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/rotary-die-bearing-post-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.31999999999999995,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 81
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/die-anvil",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.65,
        0.78,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "die-anvil"
      },
      "gltfNode": 82
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/die-anvil/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/die-anvil",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/die-anvil/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 83
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/die-anvil/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/die-anvil",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/die-anvil/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 84
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/die-anvil-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.65,
        0.78,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/die-anvil-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 85
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/die-anvil-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.65,
        0.78,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/die-anvil-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 86
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.35,
        1.16,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "slotter"
      },
      "gltfNode": 87
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 88
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 89
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter/slot-disc--0.42",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.42,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter/slot-disc--0.42",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 90
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter/slot-disc-0",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter/slot-disc-0",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 91
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter/slot-disc-0.42",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.42,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter/slot-disc-0.42",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 92
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter/w02-02-flexo-folder-gluer-rotary-diecutter:slotter_axis",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter:slotter_axis"
      },
      "gltfNode": 93
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.35,
        1.16,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 94
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter-bearing-post--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.35,
        1.03,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter-bearing-post--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.2599999999999999,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 95
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.35,
        1.16,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 96
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter-bearing-post-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.35,
        1.03,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter-bearing-post-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.2599999999999999,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 97
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter-anvil",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.35,
        0.84,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "slotter-anvil"
      },
      "gltfNode": 98
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter-anvil/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter-anvil",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter-anvil/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 99
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter-anvil/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter-anvil",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter-anvil/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 100
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter-anvil-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.35,
        0.84,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter-anvil-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 101
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter-anvil-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.35,
        0.84,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/slotter-anvil-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 102
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.4",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -4.4,
        0.94,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "conveyor--4.4"
      },
      "gltfNode": 103
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.4/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.4",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.4/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 104
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.4/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.4",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.4/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 105
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.4-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -4.4,
        0.94,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.4-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 106
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.4-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -4.4,
        0.94,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.4-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 107
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.1",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -4.1,
        0.94,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "conveyor--4.1"
      },
      "gltfNode": 108
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.1/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.1/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 109
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.1/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.1/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 110
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.1-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -4.1,
        0.94,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.1-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 111
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.1-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -4.1,
        0.94,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--4.1-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 112
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--3.8",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.8,
        0.94,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "conveyor--3.8"
      },
      "gltfNode": 113
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--3.8/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--3.8",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--3.8/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 114
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--3.8/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--3.8",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--3.8/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 115
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--3.8-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.8,
        0.94,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--3.8-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 116
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--3.8-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.8,
        0.94,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor--3.8-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 117
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.85,
        0.94,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "conveyor-0.85"
      },
      "gltfNode": 118
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-0.85/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-0.85",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-0.85/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 119
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-0.85/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-0.85",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-0.85/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 120
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-0.85-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.85,
        0.94,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-0.85-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 121
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-0.85-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.85,
        0.94,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-0.85-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 122
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.1",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1,
        0.94,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "conveyor-1.1"
      },
      "gltfNode": 123
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.1/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.1/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 124
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.1/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.1/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 125
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.1-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1,
        0.94,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.1-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 126
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.1-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1,
        0.94,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.1-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 127
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.35",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.35,
        0.94,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "conveyor-1.35"
      },
      "gltfNode": 128
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.35/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.35",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.35/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 129
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.35/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.35",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.35/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 130
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.35-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.35,
        0.94,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.35-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 131
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.35-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.35,
        0.94,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.35-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 132
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.6",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.6,
        0.94,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "conveyor-1.6"
      },
      "gltfNode": 133
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.6/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.6/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 134
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.6/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.6/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 135
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.6-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.6,
        0.94,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.6-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 136
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.6-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.6,
        0.94,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.6-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 137
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.85,
        0.94,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "conveyor-1.85"
      },
      "gltfNode": 138
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.85/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.85",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.85/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 139
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.85/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.85",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.85/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 140
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.85-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.85,
        0.94,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.85-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 141
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.85-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.85,
        0.94,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-1.85-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 142
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.1",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.1,
        0.94,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "conveyor-2.1"
      },
      "gltfNode": 143
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.1/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.1/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 144
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.1/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.1/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 145
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.1-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.1,
        0.94,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.1-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 146
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.1-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.1,
        0.94,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.1-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 147
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.35",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.35,
        0.94,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "conveyor-2.35"
      },
      "gltfNode": 148
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.35/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.35",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.35/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 149
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.35/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.35",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.35/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 150
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.35-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.35,
        0.94,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.35-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 151
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.35-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.35,
        0.94,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.35-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 152
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.6",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.6,
        0.94,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "conveyor-2.6"
      },
      "gltfNode": 153
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.6/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.6/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 154
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.6/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.6/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 155
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.6-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.6,
        0.94,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.6-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 156
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.6-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.6,
        0.94,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.6-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 157
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.85,
        0.94,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "conveyor-2.85"
      },
      "gltfNode": 158
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.85/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.85",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.85/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 159
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.85/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.85",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.85/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 160
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.85-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.85,
        0.94,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.85-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 161
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.85-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.85,
        0.94,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-2.85-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 162
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.1",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.1,
        0.94,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "conveyor-3.1"
      },
      "gltfNode": 163
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.1/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.1/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 164
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.1/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.1/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 165
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.1-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.1,
        0.94,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.1-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 166
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.1-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.1,
        0.94,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.1-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 167
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.35",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.35,
        0.94,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "conveyor-3.35"
      },
      "gltfNode": 168
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.35/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.35",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.35/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 169
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.35/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.35",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.35/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 170
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.35-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.35,
        0.94,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.35-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 171
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.35-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.35,
        0.94,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.35-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 172
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.6",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.6,
        0.94,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "conveyor-3.6"
      },
      "gltfNode": 173
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.6/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.6/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 174
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.6/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.6/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 175
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.6-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.6,
        0.94,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.6-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 176
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.6-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.6,
        0.94,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.6-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 177
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.85,
        0.94,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "conveyor-3.85"
      },
      "gltfNode": 178
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.85/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.85",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.85/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 179
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.85/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.85",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.85/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 180
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.85-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.85,
        0.94,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.85-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 181
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.85-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.85,
        0.94,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-3.85-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 182
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-4.1",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        4.1,
        0.94,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "conveyor-4.1"
      },
      "gltfNode": 183
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-4.1/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-4.1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-4.1/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 184
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-4.1/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-4.1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-4.1/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 185
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-4.1-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        4.1,
        0.94,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-4.1-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 186
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-4.1-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        4.1,
        0.94,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/conveyor-4.1-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 187
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.35",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.35,
        1.08,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "compression-3.35"
      },
      "gltfNode": 188
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.35/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.35",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.35/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 189
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.35/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.35",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.35/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 190
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.35-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.35,
        1.08,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.35-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 191
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.35-bearing-post--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.35,
        0.99,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.35-bearing-post--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.18000000000000005,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 2,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00002,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 192
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.35-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.35,
        1.08,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.35-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 193
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.35-bearing-post-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.35,
        0.99,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.35-bearing-post-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.18000000000000005,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 2,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00002,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 194
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.6",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.6,
        1.08,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "compression-3.6"
      },
      "gltfNode": 195
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.6/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.6/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 196
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.6/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.6",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.6/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 197
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.6-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.6,
        1.08,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.6-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 198
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.6-bearing-post--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.6,
        0.99,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.6-bearing-post--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.18000000000000005,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 2,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00002,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 199
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.6-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.6,
        1.08,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.6-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 200
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.6-bearing-post-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.6,
        0.99,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.6-bearing-post-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.18000000000000005,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 2,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00002,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 201
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.85,
        1.08,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "compression-3.85"
      },
      "gltfNode": 202
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.85/barrel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.85",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.85/barrel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 203
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.85/journal",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.85",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.85/journal",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 204
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.85-bearing--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.85,
        1.08,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.85-bearing--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 205
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.85-bearing-post--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.85,
        0.99,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.85-bearing-post--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.18000000000000005,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 2,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00002,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 206
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.85-bearing-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.85,
        1.08,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.85-bearing-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 207
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.85-bearing-post-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.85,
        0.99,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/compression-3.85-bearing-post-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.18000000000000005,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 2,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00002,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 208
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/folding-guide--1",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/folding-guide--1",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "folding_guide",
        "BOMqty": 1
      },
      "gltfNode": 209
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-post--1-0",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.9,
        0.9624999999999999,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-post--1-0",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.12499999999999989,
            "depth": 0.05,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 210
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-arm--1-0",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.9,
        1.025,
        -0.72,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-arm--1-0",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.04,
            "depth": 0.26,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 211
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-post--1-0.5",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.9500000000000002,
        1.1375,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-post--1-0.5",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.475,
            "depth": 0.05,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 212
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-arm--1-0.5",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.9500000000000002,
        1.375,
        -0.545,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-arm--1-0.5",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.04,
            "depth": 0.61,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 213
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-post--1-1",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3,
        0.9624999999999999,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-post--1-1",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.12499999999999989,
            "depth": 0.05,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 214
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-arm--1-1",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3,
        1.025,
        -0.37,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-arm--1-1",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.04,
            "depth": 0.96,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 215
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/folding-guide-1",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/folding-guide-1",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "folding_guide",
        "BOMqty": 1
      },
      "gltfNode": 216
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-post-1-0",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.9,
        0.9624999999999999,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-post-1-0",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.12499999999999989,
            "depth": 0.05,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 217
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-arm-1-0",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.9,
        1.025,
        0.72,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-arm-1-0",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.04,
            "depth": 0.26,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 218
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-post-1-0.5",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.9500000000000002,
        1.1375,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-post-1-0.5",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.475,
            "depth": 0.05,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 219
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-arm-1-0.5",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.9500000000000002,
        1.375,
        0.545,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-arm-1-0.5",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.04,
            "depth": 0.61,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 220
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-post-1-1",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3,
        0.9624999999999999,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-post-1-1",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.12499999999999989,
            "depth": 0.05,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 221
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-arm-1-1",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3,
        1.025,
        0.37,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/fold-guide-arm-1-1",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.04,
            "depth": 0.96,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 2,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00002,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 222
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/glue-bridge-post--0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.72,
        1.185,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/glue-bridge-post--0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.06,
            "height": 0.57,
            "depth": 0.06,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 223
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/glue-bridge-post-0.85",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.72,
        1.185,
        0.85,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/glue-bridge-post-0.85",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.06,
            "height": 0.57,
            "depth": 0.06,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 224
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/glue-bridge",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.72,
        1.47,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/glue-bridge",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 225
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/glue-nozzle",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.72,
        1.28,
        0.4,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/glue-nozzle",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "hollow_process_part",
        "BOMqty": 1
      },
      "gltfNode": 226
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/w02-02-flexo-folder-gluer-rotary-diecutter:glue_supply",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0.72,
        1.55,
        0.4,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter:glue_supply",
        "frameKind": "PROCESS_PORT",
        "outwardNormalParent": [
          0,
          1,
          0
        ],
        "outwardNormalLocal": [
          0,
          0,
          1
        ],
        "orientationStatus": "ORIGINAL_DESIGN"
      },
      "gltfNode": 227
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/feed-board",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -4.1,
        1.008,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/feed-board",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.7,
            "height": 0.016,
            "depth": 1.14,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 228
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/w02-02-flexo-folder-gluer-rotary-diecutter:infeed",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -4.5,
        1,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter:infeed"
      },
      "gltfNode": 229
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/w02-02-flexo-folder-gluer-rotary-diecutter:outfeed",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        4.2,
        1,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter:outfeed"
      },
      "gltfNode": 230
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/main-drive",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.1,
        0.75,
        -1.06,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/main-drive",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.36,
            "height": 0.34,
            "depth": 0.32,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 231
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/drive-foot",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.1,
        0.34,
        -1.06,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/drive-foot",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.4,
            "height": 0.48,
            "depth": 0.35,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 232
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.2,
        0.84,
        0.942,
        1
      ],
      "sourceUserData": {
        "partId": "DS_Brand_Plate",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 233
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate/badge-bezel",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate/badge-bezel",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 234
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate/badge-backing",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate/badge-backing",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 235
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate/badge-rivet-0",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.48375,
        -0.08374999999999999,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate/badge-rivet-0",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 236
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate/badge-rivet-1",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.48375,
        0.08374999999999999,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate/badge-rivet-1",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 237
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate/badge-rivet-2",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.48375,
        -0.08374999999999999,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate/badge-rivet-2",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 238
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate/badge-rivet-3",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.48375,
        0.08374999999999999,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate/badge-rivet-3",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 239
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate/badge-D",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.145,
        0,
        0,
        0,
        0,
        0.145,
        0,
        0,
        0,
        0,
        0.015750000000000004,
        0,
        -0.0638,
        0,
        0.015137500000000002,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate/badge-D",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 240
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate/badge-S",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.145,
        0,
        0,
        0,
        0,
        0.145,
        0,
        0,
        0,
        0,
        0.015750000000000004,
        0,
        0.0638,
        0,
        0.015137500000000002,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate/badge-S",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 241
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate/badge-D-back",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.145,
        0,
        -1.775737858763662e-17,
        0,
        0,
        0.145,
        0,
        0,
        1.9288187086570817e-18,
        0,
        -0.015750000000000004,
        0,
        0.0638,
        0,
        -0.015137500000000002,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate/badge-D-back",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 242
    },
    {
      "id": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate/badge-S-back",
      "parent": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.145,
        0,
        -1.775737858763662e-17,
        0,
        0,
        0.145,
        0,
        0,
        1.9288187086570817e-18,
        0,
        -0.015750000000000004,
        0,
        -0.0638,
        0,
        -0.015137500000000002,
        1
      ],
      "sourceUserData": {
        "partId": "w02-02-flexo-folder-gluer-rotary-diecutter/w02-02-flexo-folder-gluer-rotary-diecutter:base/DS_Brand_Plate/badge-S-back",
        "assetId": "w02-02-flexo-folder-gluer-rotary-diecutter",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 243
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "전체 치수·기구 비례 자체 설계. 성능·제조사 인증을 뜻하지 않음."
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "BOBST FFG 8.20 EXPERT",
      "url": "https://www.bobst.com/na/en/products/flexo-printing-folding-gluing/ffg-8-20-expert",
      "accessed_on": "2026-10-24",
      "basis": "플렉소 인쇄·회전 다이·접힘 접착의 공정 구분 참고. 2색 자체 배치와 모든 치수는 설명용 설계."
    }
  ],
  "rights": {
    "id": "w02-02-flexo-folder-gluer-rotary-diecutter",
    "assetTypeId": "w02-02-flexo-folder-gluer-rotary-diecutter",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:de42b2902321356501b7ea94c3fbefccca55dda6a9e6646a66f6ee77729c1a38",
    "modelSource": "kit/models/w02-02-flexo-folder-gluer-rotary-diecutter.mjs",
    "dslExampleSource": "dsl/models/w02-02-flexo-folder-gluer-rotary-diecutter.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/w02-02-flexo-folder-gluer-rotary-diecutter.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/w02-02-flexo-folder-gluer-rotary-diecutter.txt",
      "sha256": "sha256:f1672b7ba2850111d12d481de41d23c03d47d1cc3df4b75176feb1c9f41055b6",
      "bytes": 824
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/w02-02-flexo-folder-gluer-rotary-diecutter/model.glb",
      "bytes": 1978048,
      "sha256": "sha256:80575fc632f5faceab8f29df5a708806628cc0842987d2bb38ae9bd4364cb1f4"
    },
    "licenses": [
      {
        "path": "open-assets/w02-02-flexo-folder-gluer-rotary-diecutter/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/w02-02-flexo-folder-gluer-rotary-diecutter/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/w02-02-flexo-folder-gluer-rotary-diecutter/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/w02-02-flexo-folder-gluer-rotary-diecutter/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/w02-02-flexo-folder-gluer-rotary-diecutter/LICENSES/ASSET-NOTICES/w02-02-flexo-folder-gluer-rotary-diecutter.txt",
        "bytes": 824,
        "sha256": "sha256:f1672b7ba2850111d12d481de41d23c03d47d1cc3df4b75176feb1c9f41055b6"
      }
    ],
    "source": {
      "path": "kit/models/w02-02-flexo-folder-gluer-rotary-diecutter.mjs",
      "bytes": 13348,
      "sha256": "sha256:de42b2902321356501b7ea94c3fbefccca55dda6a9e6646a66f6ee77729c1a38"
    },
    "ds2": {
      "path": "dsl/models/w02-02-flexo-folder-gluer-rotary-diecutter.ds2",
      "bytes": 1901,
      "sha256": "sha256:f2011c11111188da08d0634c2b684f79caadb2039e673afd69ac088802a69654",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 244,
    "triangles": 71116,
    "maxMatrixError": 0,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 9,
    "nodeComparisons": 2196,
    "semanticFrameComparisons": 63,
    "acceptanceCases": 4,
    "acceptanceFrameComparisons": 24,
    "maxMotionMatrixError": 0
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "w02-02-flexo-folder-gluer-rotary-diecutter",
    "kind": "equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "골판지·인쇄 접힘 접착",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "infeed": {
        "frameId": "infeed",
        "portClass": "material-flow",
        "direction": "input",
        "quaternion": [
          0,
          1,
          0,
          0
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -4.5,
            1,
            0
          ],
          "quaternion": [
            0,
            1,
            0,
            0
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "outfeed": {
        "frameId": "outfeed",
        "portClass": "material-flow",
        "direction": "output",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            4.2,
            1,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "print_axis": {
        "frameId": "print_axis",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -3.1,
            1.25,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "die_axis": {
        "frameId": "die_axis",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -0.65,
            1.22,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "slotter_axis": {
        "frameId": "slotter_axis",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.35,
            1.16,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "glue_supply": {
        "frameId": "glue_supply",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.72,
            1.55,
            0.4
          ],
          "quaternion": [
            -0.7071067811865475,
            0,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
