{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "u05-03-uhf-hot-air-rubber-curing-tunnel",
  "assetTypeId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
  "label": "고무 압출 연속 가류 라인(UHF·열풍 터널)",
  "category": "U 타이어와 고무",
  "description": "실제 관통 입출구를 가진 UHF·열풍 2개 터널, 파형도관·순환팬·배기 스택·인취롤 및 독립 직선 컷오프.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -4.800000190734863,
      -6.735557689218423e-17,
      -1.1350000059604644
    ],
    "max": [
      4.800000190734863,
      1.8459999992251395,
      1.100000023841858
    ]
  },
  "size": [
    9.600000381469727,
    1.8459999992251395,
    2.2350000298023223
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 70,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 0,
      "blindSocketHeads": 0,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 20,
    "warnings": [],
    "changedMeshes": 70,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 81456,
      "afterTriangles": 76752,
      "reachedTarget": true,
      "changedMeshes": 7,
      "changes": [
        {
          "meshes": [
            "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-0",
            "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-1",
            "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-2",
            "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-3",
            "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-4",
            "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-5",
            "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-6"
          ],
          "radiusM": 0.0018000000000000002,
          "dimensionsM": [
            0.12,
            0.008,
            0.004
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        }
      ],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/u05-03-uhf-hot-air-rubber-curing-tunnel.mjs",
    "sourceSha256": "sha256:64e8d00d5ef581f7995d773abdaa9f2d42f115e0e84ba10f539cc74e649364ea",
    "deliverySha256": "sha256:64e8d00d5ef581f7995d773abdaa9f2d42f115e0e84ba10f539cc74e649364ea",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:4ad1ac1087ea5d1a18dd7c0f8f1dd4cac88652098f693b868c055b5bb95499be",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:4ad1ac1087ea5d1a18dd7c0f8f1dd4cac88652098f693b868c055b5bb95499be",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [],
  "parameterValues": {},
  "joints": [
    {
      "id": "transport",
      "label": "이송·인취 롤러 회전",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "unit": "rad",
      "min": -6.283185307179586,
      "max": 6.283185307179586,
      "initial": 0
    },
    {
      "id": "fan",
      "label": "열풍 순환 임펠러",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "unit": "rad",
      "min": -6.283185307179586,
      "max": 6.283185307179586,
      "initial": 0
    },
    {
      "id": "cut",
      "label": "출구 칼날 하강",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "unit": "m",
      "min": 0,
      "max": 0.22,
      "initial": 0
    }
  ],
  "initialState": {
    "transport": 0,
    "fan": 0,
    "cut": 0
  },
  "bindings": [
    {
      "id": "transport",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        -2.7,
        0.57,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 3,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis--2.7",
      "gltfNode": 43
    },
    {
      "id": "transport",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        -1.7,
        0.57,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 3,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis--1.7",
      "gltfNode": 47
    },
    {
      "id": "transport",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        -0.7,
        0.57,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 3,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis--0.7",
      "gltfNode": 51
    },
    {
      "id": "transport",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        0.3,
        0.57,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 3,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis-0.3",
      "gltfNode": 55
    },
    {
      "id": "transport",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        1.3,
        0.57,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 3,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis-1.3",
      "gltfNode": 59
    },
    {
      "id": "transport",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        2.3,
        0.57,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 3,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis-2.3",
      "gltfNode": 63
    },
    {
      "id": "transport",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        -3.7,
        0.57,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 3,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/entry-exit-roll--3.7",
      "gltfNode": 67
    },
    {
      "id": "transport",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        -3.25,
        0.57,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 3,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/entry-exit-roll--3.25",
      "gltfNode": 71
    },
    {
      "id": "transport",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        3.05,
        0.57,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 3,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/entry-exit-roll-3.05",
      "gltfNode": 75
    },
    {
      "id": "fan",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        1.1,
        1.4,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller",
      "gltfNode": 84
    },
    {
      "id": "transport",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        3.45,
        0.46,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-axis-0.46",
      "gltfNode": 104
    },
    {
      "id": "transport",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        3.45,
        0.78,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-axis-0.78",
      "gltfNode": 109
    },
    {
      "id": "cut",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "zeroPosition": [
        4.25,
        0.82,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutoff-blade-carriage",
      "gltfNode": 135
    }
  ],
  "jointBindings": [
    {
      "id": "transport",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        -2.7,
        0.57,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 3,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis--2.7",
      "gltfNode": 43
    },
    {
      "id": "transport",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        -1.7,
        0.57,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 3,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis--1.7",
      "gltfNode": 47
    },
    {
      "id": "transport",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        -0.7,
        0.57,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 3,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis--0.7",
      "gltfNode": 51
    },
    {
      "id": "transport",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        0.3,
        0.57,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 3,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis-0.3",
      "gltfNode": 55
    },
    {
      "id": "transport",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        1.3,
        0.57,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 3,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis-1.3",
      "gltfNode": 59
    },
    {
      "id": "transport",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        2.3,
        0.57,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 3,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis-2.3",
      "gltfNode": 63
    },
    {
      "id": "transport",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        -3.7,
        0.57,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 3,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/entry-exit-roll--3.7",
      "gltfNode": 67
    },
    {
      "id": "transport",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        -3.25,
        0.57,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 3,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/entry-exit-roll--3.25",
      "gltfNode": 71
    },
    {
      "id": "transport",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        3.05,
        0.57,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 3,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/entry-exit-roll-3.05",
      "gltfNode": 75
    },
    {
      "id": "fan",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        1.1,
        1.4,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller",
      "gltfNode": 84
    },
    {
      "id": "transport",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        3.45,
        0.46,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-axis-0.46",
      "gltfNode": 104
    },
    {
      "id": "transport",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        3.45,
        0.78,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-axis-0.78",
      "gltfNode": 109
    },
    {
      "id": "cut",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "zeroPosition": [
        4.25,
        0.82,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutoff-blade-carriage",
      "gltfNode": 135
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "fan-index": {
      "id": "fan-index",
      "node": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller/u05-03-uhf-hot-air-rubber-curing-tunnel:fan-index",
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller/u05-03-uhf-hot-air-rubber-curing-tunnel:fan-index",
      "gltfNode": 92,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.28,
        1.4,
        0,
        1
      ],
      "position": [
        1.28,
        1.4,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "exhaust": {
      "id": "exhaust",
      "node": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/u05-03-uhf-hot-air-rubber-curing-tunnel:exhaust",
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/u05-03-uhf-hot-air-rubber-curing-tunnel:exhaust",
      "gltfNode": 103,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        2.1,
        1.66,
        0,
        1
      ],
      "position": [
        2.1,
        1.66,
        0
      ],
      "quaternion": [
        -0.7071067811865475,
        0,
        0,
        0.7071067811865476
      ]
    },
    "cutting-edge": {
      "id": "cutting-edge",
      "node": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutoff-blade-carriage/u05-03-uhf-hot-air-rubber-curing-tunnel:cutting-edge",
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutoff-blade-carriage/u05-03-uhf-hot-air-rubber-curing-tunnel:cutting-edge",
      "gltfNode": 140,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        4.25,
        0.82,
        0,
        1
      ],
      "position": [
        4.25,
        0.82,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "profile-inlet": {
      "id": "profile-inlet",
      "node": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/u05-03-uhf-hot-air-rubber-curing-tunnel:profile-inlet",
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/u05-03-uhf-hot-air-rubber-curing-tunnel:profile-inlet",
      "gltfNode": 144,
      "matrix": [
        2.220446049250313e-16,
        0,
        1,
        0,
        0,
        1,
        0,
        0,
        -1,
        0,
        2.220446049250313e-16,
        0,
        -4.17,
        0.65,
        0,
        1
      ],
      "position": [
        -4.17,
        0.65,
        0
      ],
      "quaternion": [
        0,
        -0.7071067811865475,
        0,
        0.7071067811865476
      ]
    },
    "profile-outlet": {
      "id": "profile-outlet",
      "node": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/u05-03-uhf-hot-air-rubber-curing-tunnel:profile-outlet",
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/u05-03-uhf-hot-air-rubber-curing-tunnel:profile-outlet",
      "gltfNode": 145,
      "matrix": [
        2.220446049250313e-16,
        0,
        -1,
        0,
        0,
        1,
        0,
        0,
        1,
        0,
        2.220446049250313e-16,
        0,
        4.46,
        0.65,
        0,
        1
      ],
      "position": [
        4.46,
        0.65,
        0
      ],
      "quaternion": [
        0,
        0.7071067811865475,
        0,
        0.7071067811865476
      ]
    },
    "uhf-treatment-datum": {
      "id": "uhf-treatment-datum",
      "node": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/u05-03-uhf-hot-air-rubber-curing-tunnel:uhf-treatment-datum",
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/u05-03-uhf-hot-air-rubber-curing-tunnel:uhf-treatment-datum",
      "gltfNode": 146,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.8,
        0.65,
        0,
        1
      ],
      "position": [
        -1.8,
        0.65,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "hot-air-treatment-datum": {
      "id": "hot-air-treatment-datum",
      "node": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/u05-03-uhf-hot-air-rubber-curing-tunnel:hot-air-treatment-datum",
      "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/u05-03-uhf-hot-air-rubber-curing-tunnel:hot-air-treatment-datum",
      "gltfNode": 147,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1,
        0.65,
        0,
        1
      ],
      "position": [
        1.1,
        0.65,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    }
  },
  "ports": {
    "mount": "base",
    "inlet": "profile-inlet",
    "outlet": "profile-outlet",
    "exhaust": "exhaust",
    "cut": "cutting-edge",
    "uhf_zone": "uhf-treatment-datum",
    "hot_air_zone": "hot-air-treatment-datum"
  },
  "nodes": [
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 70,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 0,
            "blindSocketHeads": 0,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 20,
          "warnings": [],
          "changedMeshes": 70,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 81456,
            "afterTriangles": 76752,
            "reachedTarget": true,
            "changedMeshes": 7,
            "changes": [
              {
                "meshes": [
                  "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-0",
                  "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-1",
                  "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-2",
                  "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-3",
                  "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-4",
                  "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-5",
                  "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-6"
                ],
                "radiusM": 0.0018000000000000002,
                "dimensionsM": [
                  0.12,
                  0.008,
                  0.004
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              }
            ],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "u05-03-uhf-hot-air-rubber-curing-tunnel",
          "label": "고무 프로파일 UHF·열풍 연속 가류 표시 라인",
          "coordinate_profile": "lib3d-world/1",
          "category": "고무 배합·타이어 성형 설비",
          "summary": "실제 관통 입출구를 가진 UHF·열풍 2개 터널, 파형도관·순환팬·배기 스택·인취롤 및 독립 직선 컷오프.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [],
          "joints": [
            {
              "id": "transport",
              "label": "이송·인취 롤러 회전",
              "kind": "revolute",
              "axis": [
                0,
                0,
                -1
              ],
              "unit": "rad",
              "min": -6.283185307179586,
              "max": 6.283185307179586,
              "initial": 0
            },
            {
              "id": "fan",
              "label": "열풍 순환 임펠러",
              "kind": "revolute",
              "axis": [
                0,
                1,
                0
              ],
              "unit": "rad",
              "min": -6.283185307179586,
              "max": 6.283185307179586,
              "initial": 0
            },
            {
              "id": "cut",
              "label": "출구 칼날 하강",
              "kind": "prismatic",
              "axis": [
                0,
                -1,
                0
              ],
              "unit": "m",
              "min": 0,
              "max": 0.22,
              "initial": 0
            }
          ],
          "ports": {
            "mount": "base",
            "inlet": "profile-inlet",
            "outlet": "profile-outlet",
            "exhaust": "exhaust",
            "cut": "cutting-edge",
            "uhf_zone": "uhf-treatment-datum",
            "hot_air_zone": "hot-air-treatment-datum"
          },
          "port_semantics": {
            "profile-inlet": {
              "meaning": "상류 가이드 입구면",
              "formula": "(-4.17,.65,0)",
              "outward_normal_parent": [
                -1,
                0,
                0
              ]
            },
            "profile-outlet": {
              "meaning": "절단 후 인출 datum",
              "formula": "(4.46,.65,0)",
              "outward_normal_parent": [
                1,
                0,
                0
              ]
            },
            "exhaust": {
              "meaning": "배기 덕트 상단 접속면",
              "formula": "(2.1,1.66,0)",
              "outward_normal_parent": [
                0,
                1,
                0
              ]
            },
            "fan-index": {
              "meaning": "순환 임펠러 끝단",
              "formula": "(1.1+.18cos(fan),1.4,-.18sin(fan))",
              "outward_normal_parent": null
            },
            "cutting-edge": {
              "meaning": "절단 칼날 아래 중심",
              "formula": "(4.25,.82-cut,0)",
              "outward_normal_parent": null
            },
            "uhf-treatment-datum": {
              "meaning": "UHF 구역 표시 중심",
              "formula": "(-1.8,.65,0)",
              "outward_normal_parent": null
            },
            "hot-air-treatment-datum": {
              "meaning": "열풍 구역 표시 중심",
              "formula": "(1.1,.65,0)",
              "outward_normal_parent": null
            }
          },
          "required_host_features": [
            "prismatic",
            "revolute"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "전체 치수·기구비례·기능 포트는 자체 설계이며 제조사 CAD 또는 가공·생산 성능을 뜻하지 않는다."
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "Rubicon microwave/hot-air vulcanization lines",
              "url": "https://www.rubicon-halle.de/en/products/vulcanization-lines/rubber/microwave/hot-air-vulcanization-lines",
              "checked_on": "2026-10-24",
              "basis": "UHF 터널과 후단 열풍 구역 및 순환 열풍 구성의 원리만 참고. 자체 치수/팬/롤러/절단기 형상."
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {},
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
          "fan-index": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller/u05-03-uhf-hot-air-rubber-curing-tunnel:fan-index",
          "exhaust": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/u05-03-uhf-hot-air-rubber-curing-tunnel:exhaust",
          "cutting-edge": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutoff-blade-carriage/u05-03-uhf-hot-air-rubber-curing-tunnel:cutting-edge",
          "profile-inlet": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/u05-03-uhf-hot-air-rubber-curing-tunnel:profile-inlet",
          "profile-outlet": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/u05-03-uhf-hot-air-rubber-curing-tunnel:profile-outlet",
          "uhf-treatment-datum": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/u05-03-uhf-hot-air-rubber-curing-tunnel:uhf-treatment-datum",
          "hot-air-treatment-datum": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/u05-03-uhf-hot-air-rubber-curing-tunnel:hot-air-treatment-datum"
        },
        "jointBindings": [
          {
            "id": "transport",
            "kind": "revolute",
            "axis": [
              0,
              0,
              -1
            ],
            "zeroPosition": [
              -2.7,
              0.57,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 3,
            "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis--2.7"
          },
          {
            "id": "transport",
            "kind": "revolute",
            "axis": [
              0,
              0,
              -1
            ],
            "zeroPosition": [
              -1.7,
              0.57,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 3,
            "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis--1.7"
          },
          {
            "id": "transport",
            "kind": "revolute",
            "axis": [
              0,
              0,
              -1
            ],
            "zeroPosition": [
              -0.7,
              0.57,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 3,
            "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis--0.7"
          },
          {
            "id": "transport",
            "kind": "revolute",
            "axis": [
              0,
              0,
              -1
            ],
            "zeroPosition": [
              0.3,
              0.57,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 3,
            "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis-0.3"
          },
          {
            "id": "transport",
            "kind": "revolute",
            "axis": [
              0,
              0,
              -1
            ],
            "zeroPosition": [
              1.3,
              0.57,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 3,
            "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis-1.3"
          },
          {
            "id": "transport",
            "kind": "revolute",
            "axis": [
              0,
              0,
              -1
            ],
            "zeroPosition": [
              2.3,
              0.57,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 3,
            "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis-2.3"
          },
          {
            "id": "transport",
            "kind": "revolute",
            "axis": [
              0,
              0,
              -1
            ],
            "zeroPosition": [
              -3.7,
              0.57,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 3,
            "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/entry-exit-roll--3.7"
          },
          {
            "id": "transport",
            "kind": "revolute",
            "axis": [
              0,
              0,
              -1
            ],
            "zeroPosition": [
              -3.25,
              0.57,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 3,
            "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/entry-exit-roll--3.25"
          },
          {
            "id": "transport",
            "kind": "revolute",
            "axis": [
              0,
              0,
              -1
            ],
            "zeroPosition": [
              3.05,
              0.57,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 3,
            "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/entry-exit-roll-3.05"
          },
          {
            "id": "fan",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              1.1,
              1.4,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller"
          },
          {
            "id": "transport",
            "kind": "revolute",
            "axis": [
              0,
              0,
              -1
            ],
            "zeroPosition": [
              3.45,
              0.46,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-axis-0.46"
          },
          {
            "id": "transport",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              3.45,
              0.78,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-axis-0.78"
          },
          {
            "id": "cut",
            "kind": "prismatic",
            "axis": [
              0,
              -1,
              0
            ],
            "zeroPosition": [
              4.25,
              0.82,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutoff-blade-carriage"
          }
        ],
        "joints": [
          {
            "id": "transport",
            "label": "이송·인취 롤러 회전",
            "kind": "revolute",
            "axis": [
              0,
              0,
              -1
            ],
            "unit": "rad",
            "min": -6.283185307179586,
            "max": 6.283185307179586,
            "initial": 0,
            "value": 0
          },
          {
            "id": "fan",
            "label": "열풍 순환 임펠러",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "unit": "rad",
            "min": -6.283185307179586,
            "max": 6.283185307179586,
            "initial": 0,
            "value": 0
          },
          {
            "id": "cut",
            "label": "출구 칼날 하강",
            "kind": "prismatic",
            "axis": [
              0,
              -1,
              0
            ],
            "unit": "m",
            "min": 0,
            "max": 0.22,
            "initial": 0,
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 79
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "전체 치수·기구비례·기능 포트는 자체 설계이며 제조사 CAD 또는 가공·생산 성능을 뜻하지 않는다."
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "Rubicon microwave/hot-air vulcanization lines",
            "url": "https://www.rubicon-halle.de/en/products/vulcanization-lines/rubber/microwave/hot-air-vulcanization-lines",
            "checked_on": "2026-10-24",
            "basis": "UHF 터널과 후단 열풍 구역 및 순환 열풍 구성의 원리만 참고. 자체 치수/팬/롤러/절단기 형상."
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "transport": 0,
          "fan": 0,
          "cut": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel:base"
      },
      "gltfNode": 1
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/foundation-plate",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/foundation-plate",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 2
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/machine-cabinet",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.10500000000000001,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/machine-cabinet",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 9.44,
            "height": 0.14,
            "depth": 2.04,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 3
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-long-rail--0.9400000000000001",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.065,
        -0.9400000000000001,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-long-rail--0.9400000000000001",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 9.5,
            "height": 0.06,
            "depth": 0.06,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 4
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-long-rail-0.9400000000000001",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.065,
        0.9400000000000001,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-long-rail-0.9400000000000001",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 9.5,
            "height": 0.06,
            "depth": 0.06,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 5
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-0",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.4,
        0.14,
        1.0230000000000001,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-0",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.008,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 6
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-1",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.4,
        0.163,
        1.0230000000000001,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-1",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.008,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 7
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-2",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.4,
        0.186,
        1.0230000000000001,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-2",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.008,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 8
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-3",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.4,
        0.20900000000000002,
        1.0230000000000001,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-3",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.008,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 9
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-4",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.4,
        0.232,
        1.0230000000000001,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-4",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.008,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 10
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-5",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.4,
        0.255,
        1.0230000000000001,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-5",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.008,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 11
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-6",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.4,
        0.278,
        1.0230000000000001,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cabinet-vent-6",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.008,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 12
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-floor",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.8,
        0.5,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-floor",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 2.5,
            "height": 0.14,
            "depth": 1.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 13
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-roof",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.8,
        1.22,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-roof",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 2.5,
            "height": 0.16,
            "depth": 1.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 14
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-side--0.5",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.8,
        0.855,
        -0.5,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-side--0.5",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 2.5,
            "height": 0.57,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 15
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-side-0.5",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.8,
        0.855,
        0.5,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-side-0.5",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 2.5,
            "height": 0.57,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 16
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-entry-open-portal",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.05,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-entry-open-portal",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "open_enclosure",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 17
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-exit-open-portal",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.5850000000000001,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-exit-open-portal",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "open_enclosure",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 18
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-leg--2.7--0.43",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.7,
        0.3025,
        -0.43,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-leg--2.7--0.43",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.14,
            "height": 0.255,
            "depth": 0.14,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 19
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-leg--2.7-0.43",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.7,
        0.3025,
        0.43,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-leg--2.7-0.43",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.14,
            "height": 0.255,
            "depth": 0.14,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 20
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-leg--0.9000000000000001--0.43",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.9000000000000001,
        0.3025,
        -0.43,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-leg--0.9000000000000001--0.43",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.14,
            "height": 0.255,
            "depth": 0.14,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 21
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-leg--0.9000000000000001-0.43",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.9000000000000001,
        0.3025,
        0.43,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-leg--0.9000000000000001-0.43",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.14,
            "height": 0.255,
            "depth": 0.14,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 22
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-side-rib-0",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.8,
        0.855,
        0.575,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-side-rib-0",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.035,
            "height": 0.53,
            "depth": 0.035,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 23
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-side-rib-1",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.3,
        0.855,
        0.575,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-side-rib-1",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.035,
            "height": 0.53,
            "depth": 0.035,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 24
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-side-rib-2",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.7999999999999998,
        0.855,
        0.575,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-side-rib-2",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.035,
            "height": 0.53,
            "depth": 0.035,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 25
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-side-rib-3",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.2999999999999998,
        0.855,
        0.575,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-side-rib-3",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.035,
            "height": 0.53,
            "depth": 0.035,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 26
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-side-rib-4",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.7999999999999998,
        0.855,
        0.575,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/uhf-side-rib-4",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.035,
            "height": 0.53,
            "depth": 0.035,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 27
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-floor",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1,
        0.5,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-floor",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 3.1,
            "height": 0.14,
            "depth": 1.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 28
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-roof",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1,
        1.14,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-roof",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 29
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-side--0.5",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1,
        0.855,
        -0.5,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-side--0.5",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 3.1,
            "height": 0.57,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 30
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-side-0.5",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1,
        0.855,
        0.5,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-side-0.5",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 3.1,
            "height": 0.57,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 31
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-entry-open-portal",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.44999999999999996,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-entry-open-portal",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "open_enclosure",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 32
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-exit-open-portal",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.615,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-exit-open-portal",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "open_enclosure",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 33
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-leg--0.015999999999999792--0.43",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.015999999999999792,
        0.3025,
        -0.43,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-leg--0.015999999999999792--0.43",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.14,
            "height": 0.255,
            "depth": 0.14,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 34
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-leg--0.015999999999999792-0.43",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.015999999999999792,
        0.3025,
        0.43,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-leg--0.015999999999999792-0.43",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.14,
            "height": 0.255,
            "depth": 0.14,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 35
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-leg-2.216--0.43",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.216,
        0.3025,
        -0.43,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-leg-2.216--0.43",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.14,
            "height": 0.255,
            "depth": 0.14,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 36
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-leg-2.216-0.43",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.216,
        0.3025,
        0.43,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-leg-2.216-0.43",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.14,
            "height": 0.255,
            "depth": 0.14,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 37
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-side-rib-0",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.14000000000000012,
        0.855,
        0.575,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-side-rib-0",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.035,
            "height": 0.53,
            "depth": 0.035,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 38
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-side-rib-1",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.48,
        0.855,
        0.575,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-side-rib-1",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.035,
            "height": 0.53,
            "depth": 0.035,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 39
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-side-rib-2",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1,
        0.855,
        0.575,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-side-rib-2",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.035,
            "height": 0.53,
            "depth": 0.035,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 40
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-side-rib-3",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.7200000000000002,
        0.855,
        0.575,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-side-rib-3",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.035,
            "height": 0.53,
            "depth": 0.035,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 41
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-side-rib-4",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.3400000000000003,
        0.855,
        0.575,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/hot-air-side-rib-4",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.035,
            "height": 0.53,
            "depth": 0.035,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 42
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis--2.7",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.7,
        0.57,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "transport-roll-axis--2.7"
      },
      "gltfNode": 43
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis--2.7/conveyor-roll--2.7",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis--2.7",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis--2.7/conveyor-roll--2.7",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 44
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing--2.7--0.39",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.7,
        0.57,
        -0.39,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing--2.7--0.39",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 45
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing--2.7-0.39",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.7,
        0.57,
        0.39,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing--2.7-0.39",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 46
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis--1.7",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.7,
        0.57,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "transport-roll-axis--1.7"
      },
      "gltfNode": 47
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis--1.7/conveyor-roll--1.7",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis--1.7",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis--1.7/conveyor-roll--1.7",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 48
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing--1.7--0.39",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.7,
        0.57,
        -0.39,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing--1.7--0.39",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 49
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing--1.7-0.39",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.7,
        0.57,
        0.39,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing--1.7-0.39",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 50
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis--0.7",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.7,
        0.57,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "transport-roll-axis--0.7"
      },
      "gltfNode": 51
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis--0.7/conveyor-roll--0.7",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis--0.7",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis--0.7/conveyor-roll--0.7",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 52
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing--0.7--0.39",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.7,
        0.57,
        -0.39,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing--0.7--0.39",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 53
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing--0.7-0.39",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.7,
        0.57,
        0.39,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing--0.7-0.39",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 54
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis-0.3",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.3,
        0.57,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "transport-roll-axis-0.3"
      },
      "gltfNode": 55
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis-0.3/conveyor-roll-0.3",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis-0.3",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis-0.3/conveyor-roll-0.3",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 56
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing-0.3--0.39",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.3,
        0.57,
        -0.39,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing-0.3--0.39",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 57
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing-0.3-0.39",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.3,
        0.57,
        0.39,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing-0.3-0.39",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 58
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis-1.3",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3,
        0.57,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "transport-roll-axis-1.3"
      },
      "gltfNode": 59
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis-1.3/conveyor-roll-1.3",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis-1.3",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis-1.3/conveyor-roll-1.3",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 60
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing-1.3--0.39",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3,
        0.57,
        -0.39,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing-1.3--0.39",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 61
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing-1.3-0.39",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3,
        0.57,
        0.39,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing-1.3-0.39",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 62
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis-2.3",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.3,
        0.57,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "transport-roll-axis-2.3"
      },
      "gltfNode": 63
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis-2.3/conveyor-roll-2.3",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis-2.3",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/transport-roll-axis-2.3/conveyor-roll-2.3",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 64
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing-2.3--0.39",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.3,
        0.57,
        -0.39,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing-2.3--0.39",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 65
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing-2.3-0.39",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.3,
        0.57,
        0.39,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/roller-bearing-2.3-0.39",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 66
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/entry-exit-roll--3.7",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.7,
        0.57,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "entry-exit-roll--3.7"
      },
      "gltfNode": 67
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/entry-exit-roll--3.7/guide-roll--3.7",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/entry-exit-roll--3.7",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/entry-exit-roll--3.7/guide-roll--3.7",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 68
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/guide-roll-stand--3.7--0.34",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.7,
        0.385,
        -0.34,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/guide-roll-stand--3.7--0.34",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.13,
            "height": 0.37,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 69
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/guide-roll-stand--3.7-0.34",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.7,
        0.385,
        0.34,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/guide-roll-stand--3.7-0.34",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.13,
            "height": 0.37,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 70
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/entry-exit-roll--3.25",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.25,
        0.57,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "entry-exit-roll--3.25"
      },
      "gltfNode": 71
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/entry-exit-roll--3.25/guide-roll--3.25",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/entry-exit-roll--3.25",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/entry-exit-roll--3.25/guide-roll--3.25",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 72
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/guide-roll-stand--3.25--0.34",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.25,
        0.385,
        -0.34,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/guide-roll-stand--3.25--0.34",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.13,
            "height": 0.37,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 73
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/guide-roll-stand--3.25-0.34",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.25,
        0.385,
        0.34,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/guide-roll-stand--3.25-0.34",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.13,
            "height": 0.37,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 74
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/entry-exit-roll-3.05",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.05,
        0.57,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "entry-exit-roll-3.05"
      },
      "gltfNode": 75
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/entry-exit-roll-3.05/guide-roll-3.05",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/entry-exit-roll-3.05",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/entry-exit-roll-3.05/guide-roll-3.05",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 76
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/guide-roll-stand-3.05--0.34",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.05,
        0.385,
        -0.34,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/guide-roll-stand-3.05--0.34",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.13,
            "height": 0.37,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 77
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/guide-roll-stand-3.05-0.34",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.05,
        0.385,
        0.34,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/guide-roll-stand-3.05-0.34",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.13,
            "height": 0.37,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 78
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/microwave-generator-cabinet",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.8,
        0.785,
        -0.86,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/microwave-generator-cabinet",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.65,
            "height": 0.85,
            "depth": 0.55,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 79
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/waveguide-vertical",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.8,
        1.25,
        -0.86,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/waveguide-vertical",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.2,
            "depth": 0.3,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 80
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/waveguide-horizontal",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.8,
        1.42,
        -0.58,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/waveguide-horizontal",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.14,
            "depth": 0.65,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 81
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/waveguide-cavity-coupler",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.8,
        1.34,
        -0.28,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/waveguide-cavity-coupler",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.2,
            "height": 0.16,
            "depth": 0.2,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 82
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-fan-housing",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1,
        1.4,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-fan-housing",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 83
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1,
        1.4,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "circulation-impeller"
      },
      "gltfNode": 84
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller/fan-hub",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller/fan-hub",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 85
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller/impeller-vane-0",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9610554383107709,
        0,
        -0.27635564856411376,
        0,
        0,
        1,
        0,
        0,
        0.27635564856411376,
        0,
        0.9610554383107709,
        0,
        0.115,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller/impeller-vane-0",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.09,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 86
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller/impeller-vane-1",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.7198587312912326,
        0,
        0.6941205997402591,
        0,
        0,
        1,
        0,
        0,
        -0.6941205997402591,
        0,
        0.7198587312912326,
        0,
        0.057500000000000016,
        0,
        0.09959292143521044,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller/impeller-vane-1",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.09,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 87
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller/impeller-vane-2",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.24119670701953821,
        0,
        0.970476248304373,
        0,
        0,
        1,
        0,
        0,
        -0.970476248304373,
        0,
        -0.24119670701953821,
        0,
        -0.057499999999999975,
        0,
        0.09959292143521045,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller/impeller-vane-2",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.09,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 88
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller/impeller-vane-3",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.9610554383107708,
        0,
        0.2763556485641141,
        0,
        0,
        1,
        0,
        0,
        -0.2763556485641141,
        0,
        -0.9610554383107708,
        0,
        -0.115,
        0,
        1.408343819019456e-17,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller/impeller-vane-3",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.09,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 89
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller/impeller-vane-4",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.7198587312912328,
        0,
        -0.6941205997402586,
        0,
        0,
        1,
        0,
        0,
        0.6941205997402586,
        0,
        -0.7198587312912328,
        0,
        -0.05750000000000005,
        0,
        -0.09959292143521042,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller/impeller-vane-4",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.09,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 90
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller/impeller-vane-5",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.24119670701953821,
        0,
        -0.970476248304373,
        0,
        0,
        1,
        0,
        0,
        0.970476248304373,
        0,
        0.24119670701953821,
        0,
        0.057500000000000016,
        0,
        -0.09959292143521044,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller/impeller-vane-5",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.09,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 91
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller/u05-03-uhf-hot-air-rubber-curing-tunnel:fan-index",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/circulation-impeller",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.18,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel:fan-index"
      },
      "gltfNode": 92
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1,
        1.7,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "fan-drive",
        "componentRole": "motor",
        "BOMqty": 1
      },
      "gltfNode": 93
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive/motor-can",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive/motor-can",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 94
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive/shaft-coupling",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive/shaft-coupling",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 95
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive/terminal-box",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.11,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive/terminal-box",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.035,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 96
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive/motor-fin-0",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.066,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive/motor-fin-0",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 97
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive/motor-fin-1",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.022,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive/motor-fin-1",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 98
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive/motor-fin-2",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.022000000000000006,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive/motor-fin-2",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 99
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive/motor-fin-3",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.066,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive/motor-fin-3",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 100
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive-shaft",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1,
        1.52,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/fan-drive-shaft",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 101
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/exhaust-stack",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.1,
        1.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/exhaust-stack",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 102
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/u05-03-uhf-hot-air-rubber-curing-tunnel:exhaust",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        2.1,
        1.66,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel:exhaust",
        "datumKind": "PROCESS_PORT",
        "outwardNormalParent": [
          0,
          1,
          0
        ],
        "outwardNormalLocal": [
          0,
          0,
          1
        ],
        "orientationStatus": "ORIGINAL_DESIGN"
      },
      "gltfNode": 103
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-axis-0.46",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.45,
        0.46,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "haul-off-axis-0.46"
      },
      "gltfNode": 104
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-axis-0.46/haul-off-roll-0.46",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-axis-0.46",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-axis-0.46/haul-off-roll-0.46",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 105
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-axis-0.46/haul-off-shaft-0.46",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-axis-0.46",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-axis-0.46/haul-off-shaft-0.46",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 106
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-bearing-0.46--0.34",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.45,
        0.46,
        -0.34,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-bearing-0.46--0.34",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 107
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-bearing-0.46-0.34",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.45,
        0.46,
        0.34,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-bearing-0.46-0.34",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 108
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-axis-0.78",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.45,
        0.78,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "haul-off-axis-0.78"
      },
      "gltfNode": 109
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-axis-0.78/haul-off-roll-0.78",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-axis-0.78",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-axis-0.78/haul-off-roll-0.78",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 110
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-axis-0.78/haul-off-shaft-0.78",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-axis-0.78",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-axis-0.78/haul-off-shaft-0.78",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 111
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-bearing-0.78--0.34",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.45,
        0.78,
        -0.34,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-bearing-0.78--0.34",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 112
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-bearing-0.78-0.34",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.45,
        0.78,
        0.34,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-bearing-0.78-0.34",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 113
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-sideframe--0.42",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.45,
        0.55,
        -0.42,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-sideframe--0.42",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.64,
            "height": 0.75,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 114
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-foot--0.42",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.45,
        0.215,
        -0.42,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-foot--0.42",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.85,
            "height": 0.08,
            "depth": 0.23,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 115
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-sideframe-0.42",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.45,
        0.55,
        0.42,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-sideframe-0.42",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.64,
            "height": 0.75,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 116
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-foot-0.42",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.45,
        0.215,
        0.42,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-foot-0.42",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.85,
            "height": 0.08,
            "depth": 0.23,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 117
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-gear-motor",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.45,
        0.46,
        -0.49,
        1
      ],
      "sourceUserData": {
        "partId": "haul-off-gear-motor",
        "componentRole": "motor",
        "BOMqty": 1
      },
      "gltfNode": 118
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-gear-motor/motor-can",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-gear-motor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-gear-motor/motor-can",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 119
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-gear-motor/shaft-coupling",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-gear-motor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0.128,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-gear-motor/shaft-coupling",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 120
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-gear-motor/terminal-box",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-gear-motor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.13,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-gear-motor/terminal-box",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.035,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 121
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-gear-motor/motor-fin-0",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-gear-motor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.066,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-gear-motor/motor-fin-0",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 122
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-gear-motor/motor-fin-1",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-gear-motor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.022,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-gear-motor/motor-fin-1",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 123
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-gear-motor/motor-fin-2",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-gear-motor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.022000000000000006,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-gear-motor/motor-fin-2",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 124
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-gear-motor/motor-fin-3",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-gear-motor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.066,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/haul-off-gear-motor/motor-fin-3",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 125
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/profile-inlet-guide",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -4.1,
        0.65,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/profile-inlet-guide",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 126
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/inlet-guide-support--0.14",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -4.1,
        0.39,
        -0.14,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/inlet-guide-support--0.14",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.43,
            "depth": 0.055,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 127
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/inlet-guide-support-0.14",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -4.1,
        0.39,
        0.14,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/inlet-guide-support-0.14",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.43,
            "depth": 0.055,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 128
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/inlet-guide-crossmember",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -4.1,
        0.6,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/inlet-guide-crossmember",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.06,
            "depth": 0.33,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 129
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/preview-extruded-profile",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.65,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/preview-extruded-profile",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 8,
            "height": 0.04,
            "depth": 0.075,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 130
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutter-post--0.25",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        4.25,
        0.775,
        -0.25,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutter-post--0.25",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 1.12,
            "depth": 0.1,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 131
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutter-post-0.25",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        4.25,
        0.775,
        0.25,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutter-post-0.25",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 1.12,
            "depth": 0.1,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 132
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutter-crown",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        4.25,
        1.365,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutter-crown",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "functionalInterface": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.32,
            "height": 0.12,
            "depth": 0.65,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "explicitPrimitiveRepair": {
          "schema": "lib3d-explicit-primitive-bulk/1",
          "id": "cutter-crown-strict-source-bound-axial-passage",
          "sourceLFsha256": "sha256:eb6354815513e5b08bdc630b678fa12862e19dd5e0bc4754612595f3ca3ac635",
          "sdkSourceSha256": "sha256:b6a9f4e2b0d44c606dd051666ab9a9cb7e53c9cfd044b25d2b71c8f5ca469b01",
          "kind": "circular-passage",
          "scope": "OBJ_CANDIDATE_ONLY",
          "booleanRetriangulated": true
        }
      },
      "gltfNode": 133
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutter-cylinder",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        4.25,
        1.22,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutter-cylinder",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 134
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutoff-blade-carriage",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        4.25,
        0.82,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "cutoff-blade-carriage"
      },
      "gltfNode": 135
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutoff-blade-carriage/cutoff-blade",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutoff-blade-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.15,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutoff-blade-carriage/cutoff-blade",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.018,
            "height": 0.3,
            "depth": 0.38,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 136
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutoff-blade-carriage/cutoff-piston",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutoff-blade-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.4,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutoff-blade-carriage/cutoff-piston",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 137
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutoff-blade-carriage/knife-guide-block--0.25",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutoff-blade-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.2,
        -0.25,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutoff-blade-carriage/knife-guide-block--0.25",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.16,
            "depth": 0.09,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 138
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutoff-blade-carriage/knife-guide-block-0.25",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutoff-blade-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.2,
        0.25,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutoff-blade-carriage/knife-guide-block-0.25",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.16,
            "depth": 0.09,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 139
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutoff-blade-carriage/u05-03-uhf-hot-air-rubber-curing-tunnel:cutting-edge",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/cutoff-blade-carriage",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel:cutting-edge"
      },
      "gltfNode": 140
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/slotted-cutting-anvil",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        4.25,
        0.58,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/slotted-cutting-anvil",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 141
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/anvil-pedestal--0.23",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        4.25,
        0.3975,
        -0.23,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/anvil-pedestal--0.23",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.26,
            "height": 0.365,
            "depth": 0.1,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 142
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/anvil-pedestal-0.23",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        4.25,
        0.3975,
        0.23,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/anvil-pedestal-0.23",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.26,
            "height": 0.365,
            "depth": 0.1,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 143
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/u05-03-uhf-hot-air-rubber-curing-tunnel:profile-inlet",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        1,
        0,
        0,
        1,
        0,
        0,
        -1,
        0,
        2.220446049250313e-16,
        0,
        -4.17,
        0.65,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel:profile-inlet",
        "datumKind": "PROCESS_PORT",
        "outwardNormalParent": [
          -1,
          0,
          0
        ],
        "outwardNormalLocal": [
          0,
          0,
          1
        ],
        "orientationStatus": "ORIGINAL_DESIGN"
      },
      "gltfNode": 144
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/u05-03-uhf-hot-air-rubber-curing-tunnel:profile-outlet",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        -1,
        0,
        0,
        1,
        0,
        0,
        1,
        0,
        2.220446049250313e-16,
        0,
        4.46,
        0.65,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel:profile-outlet",
        "datumKind": "PROCESS_PORT",
        "outwardNormalParent": [
          1,
          0,
          0
        ],
        "outwardNormalLocal": [
          0,
          0,
          1
        ],
        "orientationStatus": "ORIGINAL_DESIGN"
      },
      "gltfNode": 145
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/u05-03-uhf-hot-air-rubber-curing-tunnel:uhf-treatment-datum",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.8,
        0.65,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel:uhf-treatment-datum"
      },
      "gltfNode": 146
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/u05-03-uhf-hot-air-rubber-curing-tunnel:hot-air-treatment-datum",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1,
        0.65,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel:hot-air-treatment-datum"
      },
      "gltfNode": 147
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/nameplate-backing",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.12,
        1.0330000000000001,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/nameplate-backing",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.36,
            "height": 0.13,
            "depth": 0.012,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 148
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.12,
        1.0550000000000002,
        1
      ],
      "sourceUserData": {
        "partId": "DS_Brand_Plate",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 149
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate/badge-bezel",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate/badge-bezel",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 150
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate/badge-backing",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate/badge-backing",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 151
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate/badge-rivet-0",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.13515,
        -0.030149999999999996,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate/badge-rivet-0",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 152
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate/badge-rivet-1",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.13515,
        0.030149999999999996,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate/badge-rivet-1",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 153
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate/badge-rivet-2",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.13515,
        -0.030149999999999996,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate/badge-rivet-2",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 154
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate/badge-rivet-3",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.13515,
        0.030149999999999996,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate/badge-rivet-3",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 155
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate/badge-D",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.052199999999999996,
        0,
        0,
        0,
        0,
        0.052199999999999996,
        0,
        0,
        0,
        0,
        0.007308,
        0,
        -0.022968,
        0,
        0.011903799999999999,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate/badge-D",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 156
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate/badge-S",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.052199999999999996,
        0,
        0,
        0,
        0,
        0.052199999999999996,
        0,
        0,
        0,
        0,
        0.007308,
        0,
        0.022968,
        0,
        0.011903799999999999,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate/badge-S",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 157
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate/badge-D-back",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.052199999999999996,
        0,
        -6.392656291549183e-18,
        0,
        0,
        0.052199999999999996,
        0,
        0,
        8.949718808168857e-19,
        0,
        -0.007308,
        0,
        0.022968,
        0,
        -0.011903799999999999,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate/badge-D-back",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 158
    },
    {
      "id": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate/badge-S-back",
      "parent": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.052199999999999996,
        0,
        -6.392656291549183e-18,
        0,
        0,
        0.052199999999999996,
        0,
        0,
        8.949718808168857e-19,
        0,
        -0.007308,
        0,
        -0.022968,
        0,
        -0.011903799999999999,
        1
      ],
      "sourceUserData": {
        "partId": "u05-03-uhf-hot-air-rubber-curing-tunnel/u05-03-uhf-hot-air-rubber-curing-tunnel:base/DS_Brand_Plate/badge-S-back",
        "assetId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 159
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "전체 치수·기구비례·기능 포트는 자체 설계이며 제조사 CAD 또는 가공·생산 성능을 뜻하지 않는다."
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "Rubicon microwave/hot-air vulcanization lines",
      "url": "https://www.rubicon-halle.de/en/products/vulcanization-lines/rubber/microwave/hot-air-vulcanization-lines",
      "checked_on": "2026-10-24",
      "basis": "UHF 터널과 후단 열풍 구역 및 순환 열풍 구성의 원리만 참고. 자체 치수/팬/롤러/절단기 형상."
    }
  ],
  "rights": {
    "id": "u05-03-uhf-hot-air-rubber-curing-tunnel",
    "assetTypeId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:64e8d00d5ef581f7995d773abdaa9f2d42f115e0e84ba10f539cc74e649364ea",
    "modelSource": "kit/models/u05-03-uhf-hot-air-rubber-curing-tunnel.mjs",
    "dslExampleSource": "dsl/models/u05-03-uhf-hot-air-rubber-curing-tunnel.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/u05-03-uhf-hot-air-rubber-curing-tunnel.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/u05-03-uhf-hot-air-rubber-curing-tunnel.txt",
      "sha256": "sha256:1609384386aa6fa1a5b84ead51b9f2ca6669e2dcbe81d853626cb0fe0e998b8a",
      "bytes": 821
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/u05-03-uhf-hot-air-rubber-curing-tunnel/model.glb",
      "bytes": 1974480,
      "sha256": "sha256:537c906b61609923a1823ffdf78da93e83708b5ef69d6562be3ae6760cbb0fd8"
    },
    "licenses": [
      {
        "path": "open-assets/u05-03-uhf-hot-air-rubber-curing-tunnel/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/u05-03-uhf-hot-air-rubber-curing-tunnel/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/u05-03-uhf-hot-air-rubber-curing-tunnel/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/u05-03-uhf-hot-air-rubber-curing-tunnel/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/u05-03-uhf-hot-air-rubber-curing-tunnel/LICENSES/ASSET-NOTICES/u05-03-uhf-hot-air-rubber-curing-tunnel.txt",
        "bytes": 821,
        "sha256": "sha256:1609384386aa6fa1a5b84ead51b9f2ca6669e2dcbe81d853626cb0fe0e998b8a"
      }
    ],
    "source": {
      "path": "kit/models/u05-03-uhf-hot-air-rubber-curing-tunnel.mjs",
      "bytes": 516934,
      "sha256": "sha256:64e8d00d5ef581f7995d773abdaa9f2d42f115e0e84ba10f539cc74e649364ea"
    },
    "ds2": {
      "path": "dsl/models/u05-03-uhf-hot-air-rubber-curing-tunnel.ds2",
      "bytes": 3579,
      "sha256": "sha256:896f17ad7e3cd02c4727a71c0ed3df0a83cfbbed28f4f89b87954959fe893941",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 160,
    "triangles": 76752,
    "maxMatrixError": 6.38378239159465e-16,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 19,
    "nodeComparisons": 3040,
    "semanticFrameComparisons": 152,
    "acceptanceCases": 10,
    "acceptanceFrameComparisons": 70,
    "maxMotionMatrixError": 6.661338147750939e-16
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "u05-03-uhf-hot-air-rubber-curing-tunnel",
    "kind": "equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "고무 배합·타이어 성형 설비",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "inlet": {
        "frameId": "profile-inlet",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -4.17,
            0.65,
            0
          ],
          "quaternion": [
            0,
            -0.7071067811865475,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "outlet": {
        "frameId": "profile-outlet",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            4.46,
            0.65,
            0
          ],
          "quaternion": [
            0,
            0.7071067811865475,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "exhaust": {
        "frameId": "exhaust",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            2.1,
            1.66,
            0
          ],
          "quaternion": [
            -0.7071067811865475,
            0,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "cut": {
        "frameId": "cutting-edge",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            4.25,
            0.82,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "uhf_zone": {
        "frameId": "uhf-treatment-datum",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -1.8,
            0.65,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "hot_air_zone": {
        "frameId": "hot-air-treatment-datum",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            1.1,
            0.65,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
