{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "u05-02-conveyor-belt-flatbed-curing-press",
  "assetTypeId": "u05-02-conveyor-belt-flatbed-curing-press",
  "label": "컨베이어 벨트 평판 가류기(스텝 큐어)",
  "category": "U 타이어와 고무",
  "description": "4개 강성 프레스 프레임·고정 상부 열판·4개 유압 상승 램의 하부 열판과 인입·인출 롤러.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -3.4000000953674316,
      -8.266365924077638e-17,
      -1.350000023841858
    ],
    "max": [
      3.4000000953674316,
      1.980000001490116,
      1.350000023841858
    ]
  },
  "size": [
    6.800000190734863,
    1.980000001490116,
    2.700000047683716
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 68,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 0,
      "blindSocketHeads": 0,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 20,
    "warnings": [],
    "changedMeshes": 68,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 81888,
      "afterTriangles": 77184,
      "reachedTarget": true,
      "changedMeshes": 7,
      "changes": [
        {
          "meshes": [
            "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-0",
            "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-1",
            "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-2",
            "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-3",
            "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-4",
            "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-5",
            "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-6"
          ],
          "radiusM": 0.0018000000000000002,
          "dimensionsM": [
            0.12,
            0.008,
            0.004
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        }
      ],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/u05-02-conveyor-belt-flatbed-curing-press.mjs",
    "sourceSha256": "sha256:1526de51743bd70c4bfef3d53b2e1cf68bd4158132a5f085d17aec8774a37490",
    "deliverySha256": "sha256:1526de51743bd70c4bfef3d53b2e1cf68bd4158132a5f085d17aec8774a37490",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:bbaf1d9b1aa24ef60cf543ce0bd94c5578137daf8a6820986837d943bc792a03",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:bbaf1d9b1aa24ef60cf543ce0bd94c5578137daf8a6820986837d943bc792a03",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [],
  "parameterValues": {},
  "joints": [
    {
      "id": "close",
      "label": "하부 열판 상승",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "unit": "m",
      "min": 0,
      "max": 0.45,
      "initial": 0
    },
    {
      "id": "feed",
      "label": "반제품 인입·인출 롤 회전",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "unit": "rad",
      "min": -6.283185307179586,
      "max": 6.283185307179586,
      "initial": 0
    }
  ],
  "initialState": {
    "close": 0,
    "feed": 0
  },
  "bindings": [
    {
      "id": "close",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.78,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen",
      "gltfNode": 47
    },
    {
      "id": "feed",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        -2.85,
        0.83,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis--2.85",
      "gltfNode": 79
    },
    {
      "id": "feed",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        -2.3,
        0.83,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis--2.3",
      "gltfNode": 86
    },
    {
      "id": "feed",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        2.3,
        0.83,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis-2.3",
      "gltfNode": 93
    },
    {
      "id": "feed",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        2.85,
        0.83,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis-2.85",
      "gltfNode": 100
    }
  ],
  "jointBindings": [
    {
      "id": "close",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.78,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen",
      "gltfNode": 47
    },
    {
      "id": "feed",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        -2.85,
        0.83,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis--2.85",
      "gltfNode": 79
    },
    {
      "id": "feed",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        -2.3,
        0.83,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis--2.3",
      "gltfNode": 86
    },
    {
      "id": "feed",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        2.3,
        0.83,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis-2.3",
      "gltfNode": 93
    },
    {
      "id": "feed",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        2.85,
        0.83,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis-2.85",
      "gltfNode": 100
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "lower-belt-face": {
      "id": "lower-belt-face",
      "node": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/u05-02-conveyor-belt-flatbed-curing-press:lower-belt-face",
      "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/u05-02-conveyor-belt-flatbed-curing-press:lower-belt-face",
      "gltfNode": 59,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        1.03,
        0,
        1
      ],
      "position": [
        0,
        1.03,
        0
      ],
      "quaternion": [
        -0.7071067811865475,
        0,
        0,
        0.7071067811865476
      ]
    },
    "upper-press-face": {
      "id": "upper-press-face",
      "node": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/u05-02-conveyor-belt-flatbed-curing-press:upper-press-face",
      "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/u05-02-conveyor-belt-flatbed-curing-press:upper-press-face",
      "gltfNode": 66,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        1.48,
        0,
        1
      ],
      "position": [
        0,
        1.48,
        0
      ],
      "quaternion": [
        0.7071067811865475,
        0,
        0,
        0.7071067811865476
      ]
    },
    "heat-supply": {
      "id": "heat-supply",
      "node": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/u05-02-conveyor-belt-flatbed-curing-press:heat-supply",
      "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/u05-02-conveyor-belt-flatbed-curing-press:heat-supply",
      "gltfNode": 121,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.6,
        1.54,
        0.98,
        1
      ],
      "position": [
        -0.6,
        1.54,
        0.98
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "heat-return": {
      "id": "heat-return",
      "node": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/u05-02-conveyor-belt-flatbed-curing-press:heat-return",
      "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/u05-02-conveyor-belt-flatbed-curing-press:heat-return",
      "gltfNode": 65,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.6,
        0.9400000000000001,
        0.98,
        1
      ],
      "position": [
        0.6,
        0.9400000000000001,
        0.98
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "belt-inlet": {
      "id": "belt-inlet",
      "node": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/u05-02-conveyor-belt-flatbed-curing-press:belt-inlet",
      "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/u05-02-conveyor-belt-flatbed-curing-press:belt-inlet",
      "gltfNode": 122,
      "matrix": [
        2.220446049250313e-16,
        0,
        1,
        0,
        0,
        1,
        0,
        0,
        -1,
        0,
        2.220446049250313e-16,
        0,
        -3.05,
        0.93,
        0,
        1
      ],
      "position": [
        -3.05,
        0.93,
        0
      ],
      "quaternion": [
        0,
        -0.7071067811865475,
        0,
        0.7071067811865476
      ]
    },
    "belt-outlet": {
      "id": "belt-outlet",
      "node": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/u05-02-conveyor-belt-flatbed-curing-press:belt-outlet",
      "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/u05-02-conveyor-belt-flatbed-curing-press:belt-outlet",
      "gltfNode": 123,
      "matrix": [
        2.220446049250313e-16,
        0,
        -1,
        0,
        0,
        1,
        0,
        0,
        1,
        0,
        2.220446049250313e-16,
        0,
        3.05,
        0.93,
        0,
        1
      ],
      "position": [
        3.05,
        0.93,
        0
      ],
      "quaternion": [
        0,
        0.7071067811865475,
        0,
        0.7071067811865476
      ]
    },
    "step-registration": {
      "id": "step-registration",
      "node": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/u05-02-conveyor-belt-flatbed-curing-press:step-registration",
      "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/u05-02-conveyor-belt-flatbed-curing-press:step-registration",
      "gltfNode": 124,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.9,
        0.93,
        0,
        1
      ],
      "position": [
        1.9,
        0.93,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    }
  },
  "ports": {
    "mount": "base",
    "inlet": "belt-inlet",
    "outlet": "belt-outlet",
    "press": "lower-belt-face",
    "upper_press": "upper-press-face",
    "heat_supply": "heat-supply",
    "heat_return": "heat-return",
    "registration": "step-registration"
  },
  "nodes": [
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 68,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 0,
            "blindSocketHeads": 0,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 20,
          "warnings": [],
          "changedMeshes": 68,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 81888,
            "afterTriangles": 77184,
            "reachedTarget": true,
            "changedMeshes": 7,
            "changes": [
              {
                "meshes": [
                  "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-0",
                  "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-1",
                  "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-2",
                  "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-3",
                  "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-4",
                  "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-5",
                  "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-6"
                ],
                "radiusM": 0.0018000000000000002,
                "dimensionsM": [
                  0.12,
                  0.008,
                  0.004
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              }
            ],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "u05-02-conveyor-belt-flatbed-curing-press",
          "label": "컨베이어 벨트 스텝 가류용 다프레임 평판 프레스",
          "coordinate_profile": "lib3d-world/1",
          "category": "고무 배합·타이어 성형 설비",
          "summary": "4개 강성 프레스 프레임·고정 상부 열판·4개 유압 상승 램의 하부 열판과 인입·인출 롤러.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [],
          "joints": [
            {
              "id": "close",
              "label": "하부 열판 상승",
              "kind": "prismatic",
              "axis": [
                0,
                1,
                0
              ],
              "unit": "m",
              "min": 0,
              "max": 0.45,
              "initial": 0
            },
            {
              "id": "feed",
              "label": "반제품 인입·인출 롤 회전",
              "kind": "revolute",
              "axis": [
                0,
                0,
                -1
              ],
              "unit": "rad",
              "min": -6.283185307179586,
              "max": 6.283185307179586,
              "initial": 0
            }
          ],
          "ports": {
            "mount": "base",
            "inlet": "belt-inlet",
            "outlet": "belt-outlet",
            "press": "lower-belt-face",
            "upper_press": "upper-press-face",
            "heat_supply": "heat-supply",
            "heat_return": "heat-return",
            "registration": "step-registration"
          },
          "port_semantics": {
            "lower-belt-face": {
              "meaning": "표시 벨트 상면",
              "formula": "(0,1.03+close,0)",
              "outward_normal_parent": [
                0,
                1,
                0
              ]
            },
            "upper-press-face": {
              "meaning": "고정 열판 하면",
              "formula": "(0,1.48,0)",
              "outward_normal_parent": [
                0,
                -1,
                0
              ]
            },
            "heat-supply": {
              "meaning": "상부 열원 접속면",
              "formula": "(-.60,1.54,.98)",
              "outward_normal_parent": [
                0,
                0,
                1
              ]
            },
            "heat-return": {
              "meaning": "하부 열원 접속면",
              "formula": "(.60,.94+close,.98)",
              "outward_normal_parent": [
                0,
                0,
                1
              ]
            },
            "belt-inlet": {
              "meaning": "좌측 롤 접선 인입면",
              "formula": "(-3.05,.93,0)",
              "outward_normal_parent": [
                -1,
                0,
                0
              ]
            },
            "belt-outlet": {
              "meaning": "우측 롤 접선 인출면",
              "formula": "(3.05,.93,0)",
              "outward_normal_parent": [
                1,
                0,
                0
              ]
            },
            "step-registration": {
              "meaning": "독립 스텝 위치 datum",
              "formula": "(1.9,.93,0)",
              "outward_normal_parent": null
            }
          },
          "required_host_features": [
            "prismatic",
            "revolute"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "전체 치수·기구비례·기능 포트는 자체 설계이며 제조사 CAD 또는 가공·생산 성능을 뜻하지 않는다."
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "SiTOR Hydraulic Presses for Conveyor Belts",
              "url": "https://sitor-presses.com/hydraulic-presses-for-conveyor-belts/",
              "checked_on": "2026-10-24",
              "basis": "고정/이동 열판과 유압 가압으로 평벨트를 가류하는 프레스 구성 원리. 제조사 치수·정격은 사용하지 않음."
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {},
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
          "lower-belt-face": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/u05-02-conveyor-belt-flatbed-curing-press:lower-belt-face",
          "upper-press-face": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/u05-02-conveyor-belt-flatbed-curing-press:upper-press-face",
          "heat-supply": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/u05-02-conveyor-belt-flatbed-curing-press:heat-supply",
          "heat-return": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/u05-02-conveyor-belt-flatbed-curing-press:heat-return",
          "belt-inlet": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/u05-02-conveyor-belt-flatbed-curing-press:belt-inlet",
          "belt-outlet": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/u05-02-conveyor-belt-flatbed-curing-press:belt-outlet",
          "step-registration": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/u05-02-conveyor-belt-flatbed-curing-press:step-registration"
        },
        "jointBindings": [
          {
            "id": "close",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0.78,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen"
          },
          {
            "id": "feed",
            "kind": "revolute",
            "axis": [
              0,
              0,
              -1
            ],
            "zeroPosition": [
              -2.85,
              0.83,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis--2.85"
          },
          {
            "id": "feed",
            "kind": "revolute",
            "axis": [
              0,
              0,
              -1
            ],
            "zeroPosition": [
              -2.3,
              0.83,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis--2.3"
          },
          {
            "id": "feed",
            "kind": "revolute",
            "axis": [
              0,
              0,
              -1
            ],
            "zeroPosition": [
              2.3,
              0.83,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis-2.3"
          },
          {
            "id": "feed",
            "kind": "revolute",
            "axis": [
              0,
              0,
              -1
            ],
            "zeroPosition": [
              2.85,
              0.83,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis-2.85"
          }
        ],
        "joints": [
          {
            "id": "close",
            "label": "하부 열판 상승",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "unit": "m",
            "min": 0,
            "max": 0.45,
            "initial": 0,
            "value": 0
          },
          {
            "id": "feed",
            "label": "반제품 인입·인출 롤 회전",
            "kind": "revolute",
            "axis": [
              0,
              0,
              -1
            ],
            "unit": "rad",
            "min": -6.283185307179586,
            "max": 6.283185307179586,
            "initial": 0,
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 62
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "전체 치수·기구비례·기능 포트는 자체 설계이며 제조사 CAD 또는 가공·생산 성능을 뜻하지 않는다."
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "SiTOR Hydraulic Presses for Conveyor Belts",
            "url": "https://sitor-presses.com/hydraulic-presses-for-conveyor-belts/",
            "checked_on": "2026-10-24",
            "basis": "고정/이동 열판과 유압 가압으로 평벨트를 가류하는 프레스 구성 원리. 제조사 치수·정격은 사용하지 않음."
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "close": 0,
          "feed": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press:base"
      },
      "gltfNode": 1
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/foundation-plate",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/foundation-plate",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 2
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/machine-cabinet",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.11,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/machine-cabinet",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 6.64,
            "height": 0.15,
            "depth": 2.54,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 3
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-long-rail--1.1900000000000002",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.065,
        -1.1900000000000002,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-long-rail--1.1900000000000002",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 6.7,
            "height": 0.06,
            "depth": 0.06,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 4
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-long-rail-1.1900000000000002",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.065,
        1.1900000000000002,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-long-rail-1.1900000000000002",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 6.7,
            "height": 0.06,
            "depth": 0.06,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 5
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-0",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.7,
        0.14,
        1.2730000000000001,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-0",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.008,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 6
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-1",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.7,
        0.163,
        1.2730000000000001,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-1",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.008,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 7
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-2",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.7,
        0.186,
        1.2730000000000001,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-2",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.008,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 8
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-3",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.7,
        0.20900000000000002,
        1.2730000000000001,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-3",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.008,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 9
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-4",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.7,
        0.232,
        1.2730000000000001,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-4",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.008,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 10
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-5",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.7,
        0.255,
        1.2730000000000001,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-5",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.008,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 11
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-6",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.7,
        0.278,
        1.2730000000000001,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/cabinet-vent-6",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.008,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 12
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-column--1.5--1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.5,
        1.035,
        -1.04,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-column--1.5--1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 1.7,
            "depth": 0.18,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 13
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/column-shoe--1.5--1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.5,
        0.185,
        -1.04,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/column-shoe--1.5--1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 14
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/vertical-guide--1.5--1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.5,
        1.02,
        -0.925,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/vertical-guide--1.5--1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 1.2,
            "depth": 0.045,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 15
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-column--1.5-1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.5,
        1.035,
        1.04,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-column--1.5-1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 1.7,
            "depth": 0.18,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 16
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/column-shoe--1.5-1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.5,
        0.185,
        1.04,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/column-shoe--1.5-1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 17
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/vertical-guide--1.5-1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.5,
        1.02,
        0.925,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/vertical-guide--1.5-1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 1.2,
            "depth": 0.045,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 18
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-crown--1.5",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.5,
        1.88,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-crown--1.5",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.24,
            "height": 0.2,
            "depth": 2.45,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 19
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/crown-stiffener--1.5",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.5,
        1.745,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/crown-stiffener--1.5",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.36,
            "height": 0.09,
            "depth": 2.2,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 20
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-column--0.5--1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.5,
        1.035,
        -1.04,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-column--0.5--1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 1.7,
            "depth": 0.18,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 21
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/column-shoe--0.5--1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.5,
        0.185,
        -1.04,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/column-shoe--0.5--1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 22
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/vertical-guide--0.5--1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.5,
        1.02,
        -0.925,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/vertical-guide--0.5--1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 1.2,
            "depth": 0.045,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 23
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-column--0.5-1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.5,
        1.035,
        1.04,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-column--0.5-1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 1.7,
            "depth": 0.18,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 24
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/column-shoe--0.5-1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.5,
        0.185,
        1.04,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/column-shoe--0.5-1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 25
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/vertical-guide--0.5-1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.5,
        1.02,
        0.925,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/vertical-guide--0.5-1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 1.2,
            "depth": 0.045,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 26
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-crown--0.5",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.5,
        1.88,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-crown--0.5",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.24,
            "height": 0.2,
            "depth": 2.45,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 27
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/crown-stiffener--0.5",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.5,
        1.745,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/crown-stiffener--0.5",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.36,
            "height": 0.09,
            "depth": 2.2,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 28
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-column-0.5--1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.5,
        1.035,
        -1.04,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-column-0.5--1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 1.7,
            "depth": 0.18,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 29
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/column-shoe-0.5--1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.5,
        0.185,
        -1.04,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/column-shoe-0.5--1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 30
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/vertical-guide-0.5--1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.5,
        1.02,
        -0.925,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/vertical-guide-0.5--1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 1.2,
            "depth": 0.045,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 31
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-column-0.5-1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.5,
        1.035,
        1.04,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-column-0.5-1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 1.7,
            "depth": 0.18,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 32
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/column-shoe-0.5-1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.5,
        0.185,
        1.04,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/column-shoe-0.5-1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 33
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/vertical-guide-0.5-1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.5,
        1.02,
        0.925,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/vertical-guide-0.5-1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 1.2,
            "depth": 0.045,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 34
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-crown-0.5",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.5,
        1.88,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-crown-0.5",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.24,
            "height": 0.2,
            "depth": 2.45,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 35
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/crown-stiffener-0.5",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.5,
        1.745,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/crown-stiffener-0.5",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.36,
            "height": 0.09,
            "depth": 2.2,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 36
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-column-1.5--1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.5,
        1.035,
        -1.04,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-column-1.5--1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 1.7,
            "depth": 0.18,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 37
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/column-shoe-1.5--1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.5,
        0.185,
        -1.04,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/column-shoe-1.5--1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 38
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/vertical-guide-1.5--1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.5,
        1.02,
        -0.925,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/vertical-guide-1.5--1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 1.2,
            "depth": 0.045,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 39
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-column-1.5-1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.5,
        1.035,
        1.04,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-column-1.5-1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 1.7,
            "depth": 0.18,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 40
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/column-shoe-1.5-1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.5,
        0.185,
        1.04,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/column-shoe-1.5-1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "machined_plate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 41
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/vertical-guide-1.5-1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.5,
        1.02,
        0.925,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/vertical-guide-1.5-1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 1.2,
            "depth": 0.045,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 42
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-crown-1.5",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.5,
        1.88,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/press-crown-1.5",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.24,
            "height": 0.2,
            "depth": 2.45,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 43
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/crown-stiffener-1.5",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.5,
        1.745,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/crown-stiffener-1.5",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.36,
            "height": 0.09,
            "depth": 2.2,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 44
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/upper-insulation",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.65,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/upper-insulation",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 3.84,
            "height": 0.1,
            "depth": 1.8,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 45
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/fixed-upper-hot-platen",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.54,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/fixed-upper-hot-platen",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 3.84,
            "height": 0.12,
            "depth": 1.8,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 46
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.78,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "moving-lower-hot-platen"
      },
      "gltfNode": 47
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/lower-platen-carrier",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.05,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/lower-platen-carrier",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 3.84,
            "height": 0.1,
            "depth": 1.8,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 48
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/lower-hot-platen",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.16,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/lower-hot-platen",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 3.84,
            "height": 0.12,
            "depth": 1.8,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 49
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/lower-guide-shoe--1.5--1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.5,
        0.12,
        -0.93,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/lower-guide-shoe--1.5--1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.18,
            "depth": 0.14,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 50
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/lower-guide-shoe--1.5-1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.5,
        0.12,
        0.93,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/lower-guide-shoe--1.5-1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.18,
            "depth": 0.14,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 51
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/lower-guide-shoe--0.5--1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.5,
        0.12,
        -0.93,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/lower-guide-shoe--0.5--1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.18,
            "depth": 0.14,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 52
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/lower-guide-shoe--0.5-1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.5,
        0.12,
        0.93,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/lower-guide-shoe--0.5-1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.18,
            "depth": 0.14,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 53
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/lower-guide-shoe-0.5--1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.5,
        0.12,
        -0.93,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/lower-guide-shoe-0.5--1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.18,
            "depth": 0.14,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 54
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/lower-guide-shoe-0.5-1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.5,
        0.12,
        0.93,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/lower-guide-shoe-0.5-1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.18,
            "depth": 0.14,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 55
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/lower-guide-shoe-1.5--1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.5,
        0.12,
        -0.93,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/lower-guide-shoe-1.5--1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.18,
            "depth": 0.14,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 56
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/lower-guide-shoe-1.5-1.04",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.5,
        0.12,
        0.93,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/lower-guide-shoe-1.5-1.04",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.18,
            "depth": 0.14,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 57
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/preview-belt-coupon",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.235,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/preview-belt-coupon",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 3.56,
            "height": 0.03,
            "depth": 1.2,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 58
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/u05-02-conveyor-belt-flatbed-curing-press:lower-belt-face",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0.25,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press:lower-belt-face",
        "datumKind": "PROCESS_PORT",
        "outwardNormalParent": [
          0,
          1,
          0
        ],
        "outwardNormalLocal": [
          0,
          0,
          1
        ],
        "orientationStatus": "ORIGINAL_DESIGN"
      },
      "gltfNode": 59
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/fixed-ram--1.3--0.55",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3,
        -0.33,
        -0.55,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/fixed-ram--1.3--0.55",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 60
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/fixed-ram--1.3-0.55",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3,
        -0.33,
        0.55,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/fixed-ram--1.3-0.55",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 61
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/fixed-ram-1.3--0.55",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3,
        -0.33,
        -0.55,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/fixed-ram-1.3--0.55",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 62
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/fixed-ram-1.3-0.55",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3,
        -0.33,
        0.55,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/fixed-ram-1.3-0.55",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 63
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/lower-heating-return",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.6,
        0.16,
        0.93,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/lower-heating-return",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 64
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen/u05-02-conveyor-belt-flatbed-curing-press:heat-return",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/moving-lower-hot-platen",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.6,
        0.16,
        0.98,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press:heat-return",
        "datumKind": "PROCESS_PORT",
        "outwardNormalParent": [
          0,
          0,
          1
        ],
        "outwardNormalLocal": [
          0,
          0,
          1
        ],
        "orientationStatus": "ORIGINAL_DESIGN"
      },
      "gltfNode": 65
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/u05-02-conveyor-belt-flatbed-curing-press:upper-press-face",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        1.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press:upper-press-face",
        "datumKind": "PROCESS_PORT",
        "outwardNormalParent": [
          0,
          -1,
          0
        ],
        "outwardNormalLocal": [
          0,
          0,
          1
        ],
        "orientationStatus": "ORIGINAL_DESIGN"
      },
      "gltfNode": 66
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-body--1.3--0.55",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3,
        0.49,
        -0.55,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-body--1.3--0.55",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 67
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-foot--1.3--0.55",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3,
        0.2325,
        -0.55,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-foot--1.3--0.55",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 68
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-pedestal--1.3--0.55",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3,
        0.2175,
        -0.55,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-pedestal--1.3--0.55",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.28,
            "height": 0.065,
            "depth": 0.28,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 69
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-body--1.3-0.55",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3,
        0.49,
        0.55,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-body--1.3-0.55",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 70
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-foot--1.3-0.55",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3,
        0.2325,
        0.55,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-foot--1.3-0.55",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 71
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-pedestal--1.3-0.55",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3,
        0.2175,
        0.55,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-pedestal--1.3-0.55",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.28,
            "height": 0.065,
            "depth": 0.28,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 72
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-body-1.3--0.55",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3,
        0.49,
        -0.55,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-body-1.3--0.55",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 73
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-foot-1.3--0.55",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3,
        0.2325,
        -0.55,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-foot-1.3--0.55",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 74
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-pedestal-1.3--0.55",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3,
        0.2175,
        -0.55,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-pedestal-1.3--0.55",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.28,
            "height": 0.065,
            "depth": 0.28,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 75
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-body-1.3-0.55",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3,
        0.49,
        0.55,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-body-1.3-0.55",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 76
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-foot-1.3-0.55",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3,
        0.2325,
        0.55,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-foot-1.3-0.55",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 77
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-pedestal-1.3-0.55",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3,
        0.2175,
        0.55,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-pedestal-1.3-0.55",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.28,
            "height": 0.065,
            "depth": 0.28,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 78
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis--2.85",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.85,
        0.83,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "feed-roll-axis--2.85"
      },
      "gltfNode": 79
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis--2.85/feed-roll--2.85",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis--2.85",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis--2.85/feed-roll--2.85",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 80
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis--2.85/feed-roll-shaft--2.85",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis--2.85",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis--2.85/feed-roll-shaft--2.85",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 81
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing--2.85--0.92",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.85,
        0.83,
        -0.92,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing--2.85--0.92",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 82
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-stand--2.85--0.92",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.85,
        0.49,
        -0.92,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-stand--2.85--0.92",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.55,
            "depth": 0.2,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 83
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing--2.85-0.92",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.85,
        0.83,
        0.92,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing--2.85-0.92",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 84
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-stand--2.85-0.92",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.85,
        0.49,
        0.92,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-stand--2.85-0.92",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.55,
            "depth": 0.2,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 85
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis--2.3",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.3,
        0.83,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "feed-roll-axis--2.3"
      },
      "gltfNode": 86
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis--2.3/feed-roll--2.3",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis--2.3",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis--2.3/feed-roll--2.3",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 87
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis--2.3/feed-roll-shaft--2.3",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis--2.3",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis--2.3/feed-roll-shaft--2.3",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 88
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing--2.3--0.92",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.3,
        0.83,
        -0.92,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing--2.3--0.92",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 89
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-stand--2.3--0.92",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.3,
        0.49,
        -0.92,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-stand--2.3--0.92",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.55,
            "depth": 0.2,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 90
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing--2.3-0.92",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.3,
        0.83,
        0.92,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing--2.3-0.92",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 91
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-stand--2.3-0.92",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.3,
        0.49,
        0.92,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-stand--2.3-0.92",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.55,
            "depth": 0.2,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 92
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis-2.3",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.3,
        0.83,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "feed-roll-axis-2.3"
      },
      "gltfNode": 93
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis-2.3/feed-roll-2.3",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis-2.3",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis-2.3/feed-roll-2.3",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 94
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis-2.3/feed-roll-shaft-2.3",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis-2.3",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis-2.3/feed-roll-shaft-2.3",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 95
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-2.3--0.92",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.3,
        0.83,
        -0.92,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-2.3--0.92",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 96
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-stand-2.3--0.92",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.3,
        0.49,
        -0.92,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-stand-2.3--0.92",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.55,
            "depth": 0.2,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 97
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-2.3-0.92",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.3,
        0.83,
        0.92,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-2.3-0.92",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 98
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-stand-2.3-0.92",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.3,
        0.49,
        0.92,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-stand-2.3-0.92",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.55,
            "depth": 0.2,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 99
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis-2.85",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.85,
        0.83,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "feed-roll-axis-2.85"
      },
      "gltfNode": 100
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis-2.85/feed-roll-2.85",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis-2.85",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis-2.85/feed-roll-2.85",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 101
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis-2.85/feed-roll-shaft-2.85",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis-2.85",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-roll-axis-2.85/feed-roll-shaft-2.85",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 102
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-2.85--0.92",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.85,
        0.83,
        -0.92,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-2.85--0.92",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 103
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-stand-2.85--0.92",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.85,
        0.49,
        -0.92,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-stand-2.85--0.92",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.55,
            "depth": 0.2,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 104
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-2.85-0.92",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.85,
        0.83,
        0.92,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-2.85-0.92",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 105
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-stand-2.85-0.92",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.85,
        0.49,
        0.92,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-bearing-stand-2.85-0.92",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.55,
            "depth": 0.2,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 106
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-gear-motor",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.85,
        0.83,
        -1.1,
        1
      ],
      "sourceUserData": {
        "partId": "outfeed-gear-motor",
        "componentRole": "motor",
        "BOMqty": 1
      },
      "gltfNode": 107
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-gear-motor/motor-can",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-gear-motor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-gear-motor/motor-can",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 108
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-gear-motor/shaft-coupling",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-gear-motor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0.11800000000000001,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-gear-motor/shaft-coupling",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 109
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-gear-motor/terminal-box",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-gear-motor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.11499999999999999,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-gear-motor/terminal-box",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.035,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 110
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-gear-motor/motor-fin-0",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-gear-motor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.06,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-gear-motor/motor-fin-0",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 111
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-gear-motor/motor-fin-1",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-gear-motor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.01999999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-gear-motor/motor-fin-1",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 112
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-gear-motor/motor-fin-2",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-gear-motor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.020000000000000018,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-gear-motor/motor-fin-2",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 113
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-gear-motor/motor-fin-3",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-gear-motor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.060000000000000026,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-gear-motor/motor-fin-3",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 114
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-motor-bracket",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.85,
        0.69,
        -1.1,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/outfeed-motor-bracket",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.36,
            "height": 0.12,
            "depth": 0.38,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 115
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-long-beam-left--0.92",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.57,
        0.62,
        -0.92,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-long-beam-left--0.92",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.15,
            "height": 0.09,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 116
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-long-beam-right--0.92",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.57,
        0.62,
        -0.92,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-long-beam-right--0.92",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.15,
            "height": 0.09,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 117
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-long-beam-left-0.92",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.57,
        0.62,
        0.92,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-long-beam-left-0.92",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.15,
            "height": 0.09,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 118
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-long-beam-right-0.92",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.57,
        0.62,
        0.92,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/feed-long-beam-right-0.92",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.15,
            "height": 0.09,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 119
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/upper-heating-inlet",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.6,
        1.54,
        0.93,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/upper-heating-inlet",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 120
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/u05-02-conveyor-belt-flatbed-curing-press:heat-supply",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.6,
        1.54,
        0.98,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press:heat-supply",
        "datumKind": "PROCESS_PORT",
        "outwardNormalParent": [
          0,
          0,
          1
        ],
        "outwardNormalLocal": [
          0,
          0,
          1
        ],
        "orientationStatus": "ORIGINAL_DESIGN"
      },
      "gltfNode": 121
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/u05-02-conveyor-belt-flatbed-curing-press:belt-inlet",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        1,
        0,
        0,
        1,
        0,
        0,
        -1,
        0,
        2.220446049250313e-16,
        0,
        -3.05,
        0.93,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press:belt-inlet",
        "datumKind": "PROCESS_PORT",
        "outwardNormalParent": [
          -1,
          0,
          0
        ],
        "outwardNormalLocal": [
          0,
          0,
          1
        ],
        "orientationStatus": "ORIGINAL_DESIGN"
      },
      "gltfNode": 122
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/u05-02-conveyor-belt-flatbed-curing-press:belt-outlet",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        -1,
        0,
        0,
        1,
        0,
        0,
        1,
        0,
        2.220446049250313e-16,
        0,
        3.05,
        0.93,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press:belt-outlet",
        "datumKind": "PROCESS_PORT",
        "outwardNormalParent": [
          1,
          0,
          0
        ],
        "outwardNormalLocal": [
          0,
          0,
          1
        ],
        "orientationStatus": "ORIGINAL_DESIGN"
      },
      "gltfNode": 123
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/u05-02-conveyor-belt-flatbed-curing-press:step-registration",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.9,
        0.93,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press:step-registration"
      },
      "gltfNode": 124
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-power-unit",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.65,
        0.425,
        -0.65,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/hydraulic-power-unit",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.55,
            "height": 0.48,
            "depth": 0.4,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 125
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/power-unit-pump",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.65,
        0.75,
        -0.65,
        1
      ],
      "sourceUserData": {
        "partId": "power-unit-pump",
        "componentRole": "motor",
        "BOMqty": 1
      },
      "gltfNode": 126
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/power-unit-pump/motor-can",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/power-unit-pump",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/power-unit-pump/motor-can",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 127
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/power-unit-pump/shaft-coupling",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/power-unit-pump",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.098,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/power-unit-pump/shaft-coupling",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 128
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/power-unit-pump/terminal-box",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/power-unit-pump",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.09,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/power-unit-pump/terminal-box",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.035,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 129
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/power-unit-pump/motor-fin-0",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/power-unit-pump",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.048,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/power-unit-pump/motor-fin-0",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 130
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/power-unit-pump/motor-fin-1",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/power-unit-pump",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.016,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/power-unit-pump/motor-fin-1",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 131
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/power-unit-pump/motor-fin-2",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/power-unit-pump",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.016,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/power-unit-pump/motor-fin-2",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 132
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/power-unit-pump/motor-fin-3",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/power-unit-pump",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.048,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/power-unit-pump/motor-fin-3",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 133
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/nameplate-backing",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.12,
        1.2830000000000001,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/nameplate-backing",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.36,
            "height": 0.13,
            "depth": 0.012,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 134
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.12,
        1.3050000000000002,
        1
      ],
      "sourceUserData": {
        "partId": "DS_Brand_Plate",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 135
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate/badge-bezel",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate/badge-bezel",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 136
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate/badge-backing",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate/badge-backing",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 137
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate/badge-rivet-0",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.13515,
        -0.030149999999999996,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate/badge-rivet-0",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 138
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate/badge-rivet-1",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.13515,
        0.030149999999999996,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate/badge-rivet-1",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 139
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate/badge-rivet-2",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.13515,
        -0.030149999999999996,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate/badge-rivet-2",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 140
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate/badge-rivet-3",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.13515,
        0.030149999999999996,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate/badge-rivet-3",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 141
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate/badge-D",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.052199999999999996,
        0,
        0,
        0,
        0,
        0.052199999999999996,
        0,
        0,
        0,
        0,
        0.007308,
        0,
        -0.022968,
        0,
        0.011903799999999999,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate/badge-D",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 142
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate/badge-S",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.052199999999999996,
        0,
        0,
        0,
        0,
        0.052199999999999996,
        0,
        0,
        0,
        0,
        0.007308,
        0,
        0.022968,
        0,
        0.011903799999999999,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate/badge-S",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 143
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate/badge-D-back",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.052199999999999996,
        0,
        -6.392656291549183e-18,
        0,
        0,
        0.052199999999999996,
        0,
        0,
        8.949718808168857e-19,
        0,
        -0.007308,
        0,
        0.022968,
        0,
        -0.011903799999999999,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate/badge-D-back",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 144
    },
    {
      "id": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate/badge-S-back",
      "parent": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.052199999999999996,
        0,
        -6.392656291549183e-18,
        0,
        0,
        0.052199999999999996,
        0,
        0,
        8.949718808168857e-19,
        0,
        -0.007308,
        0,
        -0.022968,
        0,
        -0.011903799999999999,
        1
      ],
      "sourceUserData": {
        "partId": "u05-02-conveyor-belt-flatbed-curing-press/u05-02-conveyor-belt-flatbed-curing-press:base/DS_Brand_Plate/badge-S-back",
        "assetId": "u05-02-conveyor-belt-flatbed-curing-press",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 145
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "전체 치수·기구비례·기능 포트는 자체 설계이며 제조사 CAD 또는 가공·생산 성능을 뜻하지 않는다."
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "SiTOR Hydraulic Presses for Conveyor Belts",
      "url": "https://sitor-presses.com/hydraulic-presses-for-conveyor-belts/",
      "checked_on": "2026-10-24",
      "basis": "고정/이동 열판과 유압 가압으로 평벨트를 가류하는 프레스 구성 원리. 제조사 치수·정격은 사용하지 않음."
    }
  ],
  "rights": {
    "id": "u05-02-conveyor-belt-flatbed-curing-press",
    "assetTypeId": "u05-02-conveyor-belt-flatbed-curing-press",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:1526de51743bd70c4bfef3d53b2e1cf68bd4158132a5f085d17aec8774a37490",
    "modelSource": "kit/models/u05-02-conveyor-belt-flatbed-curing-press.mjs",
    "dslExampleSource": "dsl/models/u05-02-conveyor-belt-flatbed-curing-press.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/u05-02-conveyor-belt-flatbed-curing-press.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/u05-02-conveyor-belt-flatbed-curing-press.txt",
      "sha256": "sha256:47bf6942d104d1aae5152d2c0b8a539edcb2361e15224a1b075e73e14ea05f44",
      "bytes": 823
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/u05-02-conveyor-belt-flatbed-curing-press/model.glb",
      "bytes": 1902792,
      "sha256": "sha256:15153dfffadb4eeb8df9152ec7e4f610adbb9ce8974b9741061021d0b35d638f"
    },
    "licenses": [
      {
        "path": "open-assets/u05-02-conveyor-belt-flatbed-curing-press/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/u05-02-conveyor-belt-flatbed-curing-press/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/u05-02-conveyor-belt-flatbed-curing-press/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/u05-02-conveyor-belt-flatbed-curing-press/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/u05-02-conveyor-belt-flatbed-curing-press/LICENSES/ASSET-NOTICES/u05-02-conveyor-belt-flatbed-curing-press.txt",
        "bytes": 823,
        "sha256": "sha256:47bf6942d104d1aae5152d2c0b8a539edcb2361e15224a1b075e73e14ea05f44"
      }
    ],
    "source": {
      "path": "kit/models/u05-02-conveyor-belt-flatbed-curing-press.mjs",
      "bytes": 23610,
      "sha256": "sha256:1526de51743bd70c4bfef3d53b2e1cf68bd4158132a5f085d17aec8774a37490"
    },
    "ds2": {
      "path": "dsl/models/u05-02-conveyor-belt-flatbed-curing-press.ds2",
      "bytes": 2737,
      "sha256": "sha256:73437e43a7a244555b2f25bbca2a7ac6735806d088d3e676b51420ffa5da7b5d",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 146,
    "triangles": 77184,
    "maxMatrixError": 0,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 14,
    "nodeComparisons": 2044,
    "semanticFrameComparisons": 112,
    "acceptanceCases": 7,
    "acceptanceFrameComparisons": 49,
    "maxMotionMatrixError": 0
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "u05-02-conveyor-belt-flatbed-curing-press",
    "kind": "transport",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "고무 배합·타이어 성형 설비",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "inlet": {
        "frameId": "belt-inlet",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -3.05,
            0.93,
            0
          ],
          "quaternion": [
            0,
            -0.7071067811865475,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "outlet": {
        "frameId": "belt-outlet",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            3.05,
            0.93,
            0
          ],
          "quaternion": [
            0,
            0.7071067811865475,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "press": {
        "frameId": "lower-belt-face",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            1.03,
            0
          ],
          "quaternion": [
            -0.7071067811865475,
            0,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "upper_press": {
        "frameId": "upper-press-face",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            1.48,
            0
          ],
          "quaternion": [
            0.7071067811865475,
            0,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "heat_supply": {
        "frameId": "heat-supply",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -0.6,
            1.54,
            0.98
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "heat_return": {
        "frameId": "heat-return",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.6,
            0.9400000000000001,
            0.98
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "registration": {
        "frameId": "step-registration",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            1.9,
            0.93,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
