{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "t01-01-automatic-bale-plucker",
  "assetTypeId": "t01-01-automatic-bale-plucker",
  "label": "자동 개면기(베일 플러커)",
  "category": "T 섬유와 의류",
  "description": "길이방향 레일의 주행 타워와 승강 캔틸레버 헤드, 실제 톱니 롤·흡입 후드·집면 연결구 및 분리된 원면 베일을 배치한 자체 설계 개면기.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -3.549999952316284,
      1.341104505225843e-9,
      -1.55
    ],
    "max": [
      3.549999952316284,
      2.970000047683716,
      1.32
    ]
  },
  "size": [
    7.099999904632568,
    2.9700000463426113,
    2.87
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 0,
      "explicitBoxFillets": 100,
      "chamferedCylinders": 0,
      "blindSocketHeads": 0,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 2,
    "warnings": [],
    "changedMeshes": 100,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 104316,
      "afterTriangles": 50556,
      "reachedTarget": true,
      "changedMeshes": 80,
      "changes": [
        {
          "meshes": [
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-0",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-1",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-2",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-3",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-4",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-5",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-6",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-7",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-0",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-1",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-2",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-3",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-4",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-5",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-6",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-7",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-0",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-1",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-2",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-3",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-4",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-5",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-6",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-7",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-0",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-1",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-2",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-3",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-4",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-5",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-6",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-7",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-0",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-1",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-2",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-3",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-4",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-5",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-6",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-7",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-0",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-1",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-2",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-3",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-4",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-5",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-6",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-7",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-0",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-1",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-2",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-3",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-4",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-5",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-6",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-7",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-0",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-1",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-2",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-3",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-4",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-5",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-6",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-7",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-0",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-1",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-2",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-3",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-4",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-5",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-6",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-7",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-0",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-1",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-2",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-3",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-4",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-5",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-6",
            "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-7"
          ],
          "radiusM": 0.00055,
          "dimensionsM": [
            0.022,
            0.035,
            0.035
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        }
      ],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/t01-01-automatic-bale-plucker.mjs",
    "sourceSha256": "sha256:06a0858deb197bebc26fa8f89ed9f42e517baa10789f9d769814cf26a445fcc9",
    "deliverySha256": "sha256:06a0858deb197bebc26fa8f89ed9f42e517baa10789f9d769814cf26a445fcc9",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:7e719dda3dedfe881ed0f8e01600197036f7c4e2c6995d849ed67e4b8ee6f0c3",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:7e719dda3dedfe881ed0f8e01600197036f7c4e2c6995d849ed67e4b8ee6f0c3",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [],
  "parameterValues": {},
  "joints": [
    {
      "id": "travel",
      "label": "개면 타워 주행",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "unit": "m",
      "min": -2.4,
      "max": 2.4,
      "initial": 0
    },
    {
      "id": "height",
      "label": "개면 헤드 승강",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "unit": "m",
      "min": 0,
      "max": 0.35,
      "initial": 0
    },
    {
      "id": "roll",
      "label": "개면 롤 회전",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "unit": "rad",
      "min": -6.283185307179586,
      "max": 6.283185307179586,
      "initial": 0
    }
  ],
  "initialState": {
    "travel": 0,
    "height": 0,
    "roll": 0
  },
  "bindings": [
    {
      "id": "travel",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower",
      "gltfNode": 16
    },
    {
      "id": "roll",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        1.16,
        0.32
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "gltfNode": 30
    },
    {
      "id": "height",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker",
      "gltfNode": 23
    }
  ],
  "jointBindings": [
    {
      "id": "travel",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower",
      "gltfNode": 16
    },
    {
      "id": "roll",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        1.16,
        0.32
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "gltfNode": 30
    },
    {
      "id": "height",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker",
      "gltfNode": 23
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "nodeName": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "fiber-suction-port": {
      "id": "fiber-suction-port",
      "node": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/t01-01-automatic-bale-plucker:fiber-suction-port",
      "nodeName": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/t01-01-automatic-bale-plucker:fiber-suction-port",
      "gltfNode": 114,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        -2.220446049250313e-16,
        1.0000000000000002,
        0,
        0,
        -1.0000000000000002,
        -2.220446049250313e-16,
        0,
        0,
        1.94,
        0.2,
        1
      ],
      "position": [
        0,
        1.94,
        0.2
      ],
      "quaternion": [
        0.7071067811865476,
        0,
        0,
        0.7071067811865475
      ]
    },
    "plucking-contact-port": {
      "id": "plucking-contact-port",
      "node": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/t01-01-automatic-bale-plucker:plucking-contact-port",
      "nodeName": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/t01-01-automatic-bale-plucker:plucking-contact-port",
      "gltfNode": 115,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        -2.220446049250313e-16,
        1.0000000000000002,
        0,
        0,
        -1.0000000000000002,
        -2.220446049250313e-16,
        0,
        0,
        1.0275,
        0.32,
        1
      ],
      "position": [
        0,
        1.0275,
        0.32
      ],
      "quaternion": [
        0.7071067811865476,
        0,
        0,
        0.7071067811865475
      ]
    },
    "bale-line-datum": {
      "id": "bale-line-datum",
      "node": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/t01-01-automatic-bale-plucker:bale-line-datum",
      "nodeName": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/t01-01-automatic-bale-plucker:bale-line-datum",
      "gltfNode": 150,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.2,
        1,
        0.32,
        1
      ],
      "position": [
        -3.2,
        1,
        0.32
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "travel-datum": {
      "id": "travel-datum",
      "node": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/t01-01-automatic-bale-plucker:travel-datum",
      "nodeName": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/t01-01-automatic-bale-plucker:travel-datum",
      "gltfNode": 151,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.28,
        -1.05,
        1
      ],
      "position": [
        0,
        0.28,
        -1.05
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    }
  },
  "ports": {
    "mount": "base",
    "work": "plucking-contact-port",
    "outlet": "fiber-suction-port",
    "inlet": "bale-line-datum",
    "datum": "travel-datum"
  },
  "nodes": [
    {
      "id": "t01-01-automatic-bale-plucker",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "t01-01-automatic-bale-plucker",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 0,
            "explicitBoxFillets": 100,
            "chamferedCylinders": 0,
            "blindSocketHeads": 0,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 2,
          "warnings": [],
          "changedMeshes": 100,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 104316,
            "afterTriangles": 50556,
            "reachedTarget": true,
            "changedMeshes": 80,
            "changes": [
              {
                "meshes": [
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-0",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-1",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-2",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-3",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-4",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-5",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-6",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-7",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-0",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-1",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-2",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-3",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-4",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-5",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-6",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-7",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-0",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-1",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-2",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-3",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-4",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-5",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-6",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-7",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-0",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-1",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-2",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-3",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-4",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-5",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-6",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-7",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-0",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-1",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-2",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-3",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-4",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-5",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-6",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-7",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-0",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-1",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-2",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-3",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-4",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-5",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-6",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-7",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-0",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-1",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-2",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-3",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-4",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-5",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-6",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-7",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-0",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-1",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-2",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-3",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-4",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-5",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-6",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-7",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-0",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-1",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-2",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-3",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-4",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-5",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-6",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-7",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-0",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-1",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-2",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-3",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-4",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-5",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-6",
                  "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-7"
                ],
                "radiusM": 0.00055,
                "dimensionsM": [
                  0.022,
                  0.035,
                  0.035
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              }
            ],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "t01-01-automatic-bale-plucker",
          "coordinate_profile": "lib3d-world/1",
          "label": "자동 개면기 베일 플러커",
          "category": "T 섬유와 의류 / T01 방적",
          "summary": "길이방향 레일의 주행 타워와 승강 캔틸레버 헤드, 실제 톱니 롤·흡입 후드·집면 연결구 및 분리된 원면 베일을 배치한 자체 설계 개면기.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [],
          "joints": [
            {
              "id": "travel",
              "label": "개면 타워 주행",
              "kind": "prismatic",
              "axis": [
                1,
                0,
                0
              ],
              "unit": "m",
              "min": -2.4,
              "max": 2.4,
              "initial": 0
            },
            {
              "id": "height",
              "label": "개면 헤드 승강",
              "kind": "prismatic",
              "axis": [
                0,
                1,
                0
              ],
              "unit": "m",
              "min": 0,
              "max": 0.35,
              "initial": 0
            },
            {
              "id": "roll",
              "label": "개면 롤 회전",
              "kind": "revolute",
              "axis": [
                0,
                0,
                1
              ],
              "unit": "rad",
              "min": -6.283185307179586,
              "max": 6.283185307179586,
              "initial": 0
            }
          ],
          "ports": {
            "mount": "base",
            "work": "plucking-contact-port",
            "outlet": "fiber-suction-port",
            "inlet": "bale-line-datum",
            "datum": "travel-datum"
          },
          "required_host_features": [
            "prismatic",
            "revolute"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "배정 패킷의 기능 범위에 따른 자체 형상·치수. 외부 CAD/제품사진/제조사 정격을 사용하지 않음."
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {},
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
          "fiber-suction-port": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/t01-01-automatic-bale-plucker:fiber-suction-port",
          "plucking-contact-port": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/t01-01-automatic-bale-plucker:plucking-contact-port",
          "bale-line-datum": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/t01-01-automatic-bale-plucker:bale-line-datum",
          "travel-datum": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/t01-01-automatic-bale-plucker:travel-datum"
        },
        "jointBindings": [
          {
            "id": "travel",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower"
          },
          {
            "id": "roll",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0,
              1.16,
              0.32
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll"
          },
          {
            "id": "height",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker"
          }
        ],
        "joints": [
          {
            "id": "travel",
            "label": "개면 타워 주행",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "unit": "m",
            "min": -2.4,
            "max": 2.4,
            "initial": 0,
            "value": 0
          },
          {
            "id": "height",
            "label": "개면 헤드 승강",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "unit": "m",
            "min": 0,
            "max": 0.35,
            "initial": 0,
            "value": 0
          },
          {
            "id": "roll",
            "label": "개면 롤 회전",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "unit": "rad",
            "min": -6.283185307179586,
            "max": 6.283185307179586,
            "initial": 0,
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 33
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "배정 패킷의 기능 범위에 따른 자체 형상·치수. 외부 CAD/제품사진/제조사 정격을 사용하지 않음."
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "travel": 0,
          "height": 0,
          "roll": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "parent": "t01-01-automatic-bale-plucker",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker:base"
      },
      "gltfNode": 1
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-foot--3--1.4",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3,
        0.035,
        -1.4,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-foot--3--1.4",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "mounting_plate",
        "BOMqty": 1
      },
      "gltfNode": 2
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-pedestal--3--1.4",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3,
        0.15,
        -1.4,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-pedestal--3--1.4",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.19,
            "depth": 0.16,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 3
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-foot--3--0.7",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3,
        0.035,
        -0.7,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-foot--3--0.7",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "mounting_plate",
        "BOMqty": 1
      },
      "gltfNode": 4
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-pedestal--3--0.7",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3,
        0.15,
        -0.7,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-pedestal--3--0.7",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.19,
            "depth": 0.16,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 5
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-foot-0--1.4",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.035,
        -1.4,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-foot-0--1.4",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "mounting_plate",
        "BOMqty": 1
      },
      "gltfNode": 6
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-pedestal-0--1.4",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.15,
        -1.4,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-pedestal-0--1.4",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.19,
            "depth": 0.16,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 7
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-foot-0--0.7",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.035,
        -0.7,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-foot-0--0.7",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "mounting_plate",
        "BOMqty": 1
      },
      "gltfNode": 8
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-pedestal-0--0.7",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.15,
        -0.7,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-pedestal-0--0.7",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.19,
            "depth": 0.16,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 9
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-foot-3--1.4",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3,
        0.035,
        -1.4,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-foot-3--1.4",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "mounting_plate",
        "BOMqty": 1
      },
      "gltfNode": 10
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-pedestal-3--1.4",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3,
        0.15,
        -1.4,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-pedestal-3--1.4",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.19,
            "depth": 0.16,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 11
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-foot-3--0.7",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3,
        0.035,
        -0.7,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-foot-3--0.7",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "mounting_plate",
        "BOMqty": 1
      },
      "gltfNode": 12
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-pedestal-3--0.7",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3,
        0.15,
        -0.7,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/rail-pedestal-3--0.7",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.19,
            "depth": 0.16,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 13
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-rail--1.4",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.28,
        -1.4,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-rail--1.4",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 7.1,
            "height": 0.065,
            "depth": 0.075,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 14
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-rail--0.7",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.28,
        -0.7,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-rail--0.7",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 7.1,
            "height": 0.065,
            "depth": 0.075,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 15
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "travel-tower"
      },
      "gltfNode": 16
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/rolling-base",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.48,
        -1.05,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/rolling-base",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.9,
            "height": 0.22,
            "depth": 1,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 17
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/travel-bearing--1.4",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.28,
        -1.4,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/travel-bearing--1.4",
        "assetId": "t01-01-automatic-bale-plucker"
      },
      "gltfNode": 18
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/travel-bearing--0.7",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.28,
        -0.7,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/travel-bearing--0.7",
        "assetId": "t01-01-automatic-bale-plucker"
      },
      "gltfNode": 19
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/tower-mast",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.77,
        -1.05,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/tower-mast",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.38,
            "height": 2.4,
            "depth": 0.3,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 20
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/vertical-guide--0.13",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.13,
        1.72,
        -0.83,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/vertical-guide--0.13",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.045,
            "height": 1.75,
            "depth": 0.045,
            "radius": 0.001125,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 21
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/vertical-guide-0.13",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.13,
        1.72,
        -0.83,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/vertical-guide-0.13",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.045,
            "height": 1.75,
            "depth": 0.045,
            "radius": 0.001125,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 22
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "lifting-plucker"
      },
      "gltfNode": 23
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/lift-bearing--0.13",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.13,
        1.48,
        -0.83,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/lift-bearing--0.13",
        "assetId": "t01-01-automatic-bale-plucker"
      },
      "gltfNode": 24
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/lift-bearing-0.13",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.13,
        1.48,
        -0.83,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/lift-bearing-0.13",
        "assetId": "t01-01-automatic-bale-plucker"
      },
      "gltfNode": 25
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/cantilever",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.51,
        0.15,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/cantilever",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.55,
            "height": 0.18,
            "depth": 2.22,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 26
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/suction-hood",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.28,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/suction-hood",
        "assetId": "t01-01-automatic-bale-plucker"
      },
      "gltfNode": 27
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/roller-bearing--0.61",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.25,
        -0.61,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/roller-bearing--0.61",
        "assetId": "t01-01-automatic-bale-plucker"
      },
      "gltfNode": 28
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/roller-bearing-1.25",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.25,
        1.25,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/roller-bearing-1.25",
        "assetId": "t01-01-automatic-bale-plucker"
      },
      "gltfNode": 29
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.16,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "plucker-roll"
      },
      "gltfNode": 30
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/toothed-drum",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/toothed-drum",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 31
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/drum-shaft",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/drum-shaft",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 32
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-0",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.115,
        0,
        -0.76,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-0",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 33
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-1",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.115,
        0,
        -0.545,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-1",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 34
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-2",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.115,
        0,
        -0.33,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-2",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 35
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-3",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.115,
        0,
        -0.11499999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-3",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 36
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-4",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.115,
        0,
        0.09999999999999998,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-4",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 37
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-5",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.115,
        0,
        0.31499999999999995,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-5",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 38
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-6",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.115,
        0,
        0.53,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-6",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 39
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-7",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.115,
        0,
        0.7449999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-0-7",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 40
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-0",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.09303695435311896,
        0.06759530401363441,
        -0.76,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-0",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 41
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-1",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.09303695435311896,
        0.06759530401363441,
        -0.545,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-1",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 42
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-2",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.09303695435311896,
        0.06759530401363441,
        -0.33,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-2",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 43
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-3",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.09303695435311896,
        0.06759530401363441,
        -0.11499999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-3",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 44
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-4",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.09303695435311896,
        0.06759530401363441,
        0.09999999999999998,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-4",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 45
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-5",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.09303695435311896,
        0.06759530401363441,
        0.31499999999999995,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-5",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 46
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-6",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.09303695435311896,
        0.06759530401363441,
        0.53,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-6",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 47
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-7",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.09303695435311896,
        0.06759530401363441,
        0.7449999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-1-7",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 48
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-0",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.03553695435311896,
        0.10937149937394267,
        -0.76,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-0",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 49
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-1",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.03553695435311896,
        0.10937149937394267,
        -0.545,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-1",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 50
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-2",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.03553695435311896,
        0.10937149937394267,
        -0.33,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-2",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 51
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-3",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.03553695435311896,
        0.10937149937394267,
        -0.11499999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-3",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 52
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-4",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.03553695435311896,
        0.10937149937394267,
        0.09999999999999998,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-4",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 53
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-5",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.03553695435311896,
        0.10937149937394267,
        0.31499999999999995,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-5",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 54
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-6",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.03553695435311896,
        0.10937149937394267,
        0.53,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-6",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 55
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-7",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.03553695435311896,
        0.10937149937394267,
        0.7449999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-2-7",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 56
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-0",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.035536954353118946,
        0.10937149937394268,
        -0.76,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-0",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 57
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-1",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.035536954353118946,
        0.10937149937394268,
        -0.545,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-1",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 58
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-2",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.035536954353118946,
        0.10937149937394268,
        -0.33,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-2",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 59
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-3",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.035536954353118946,
        0.10937149937394268,
        -0.11499999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-3",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 60
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-4",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.035536954353118946,
        0.10937149937394268,
        0.09999999999999998,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-4",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 61
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-5",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.035536954353118946,
        0.10937149937394268,
        0.31499999999999995,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-5",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 62
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-6",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.035536954353118946,
        0.10937149937394268,
        0.53,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-6",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 63
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-7",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.035536954353118946,
        0.10937149937394268,
        0.7449999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-3-7",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 64
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-0",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09303695435311894,
        0.06759530401363442,
        -0.76,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-0",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 65
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-1",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09303695435311894,
        0.06759530401363442,
        -0.545,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-1",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 66
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-2",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09303695435311894,
        0.06759530401363442,
        -0.33,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-2",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 67
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-3",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09303695435311894,
        0.06759530401363442,
        -0.11499999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-3",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 68
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-4",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09303695435311894,
        0.06759530401363442,
        0.09999999999999998,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-4",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 69
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-5",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09303695435311894,
        0.06759530401363442,
        0.31499999999999995,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-5",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 70
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-6",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09303695435311894,
        0.06759530401363442,
        0.53,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-6",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 71
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-7",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09303695435311894,
        0.06759530401363442,
        0.7449999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-4-7",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 72
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-0",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.115,
        1.408343819019456e-17,
        -0.76,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-0",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 73
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-1",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.115,
        1.408343819019456e-17,
        -0.545,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-1",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 74
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-2",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.115,
        1.408343819019456e-17,
        -0.33,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-2",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 75
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-3",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.115,
        1.408343819019456e-17,
        -0.11499999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-3",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 76
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-4",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.115,
        1.408343819019456e-17,
        0.09999999999999998,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-4",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 77
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-5",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.115,
        1.408343819019456e-17,
        0.31499999999999995,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-5",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 78
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-6",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.115,
        1.408343819019456e-17,
        0.53,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-6",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 79
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-7",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.115,
        1.408343819019456e-17,
        0.7449999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-5-7",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 80
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-0",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09303695435311896,
        -0.0675953040136344,
        -0.76,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-0",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 81
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-1",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09303695435311896,
        -0.0675953040136344,
        -0.545,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-1",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 82
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-2",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09303695435311896,
        -0.0675953040136344,
        -0.33,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-2",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 83
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-3",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09303695435311896,
        -0.0675953040136344,
        -0.11499999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-3",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 84
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-4",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09303695435311896,
        -0.0675953040136344,
        0.09999999999999998,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-4",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 85
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-5",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09303695435311896,
        -0.0675953040136344,
        0.31499999999999995,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-5",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 86
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-6",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09303695435311896,
        -0.0675953040136344,
        0.53,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-6",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 87
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-7",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09303695435311896,
        -0.0675953040136344,
        0.7449999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-6-7",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 88
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-0",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.035536954353118974,
        -0.10937149937394267,
        -0.76,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-0",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 89
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-1",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.035536954353118974,
        -0.10937149937394267,
        -0.545,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-1",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 90
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-2",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.035536954353118974,
        -0.10937149937394267,
        -0.33,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-2",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 91
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-3",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.035536954353118974,
        -0.10937149937394267,
        -0.11499999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-3",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 92
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-4",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.035536954353118974,
        -0.10937149937394267,
        0.09999999999999998,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-4",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 93
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-5",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.035536954353118974,
        -0.10937149937394267,
        0.31499999999999995,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-5",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 94
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-6",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.035536954353118974,
        -0.10937149937394267,
        0.53,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-6",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 95
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-7",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.035536954353118974,
        -0.10937149937394267,
        0.7449999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-7-7",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 96
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-0",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.03553695435311893,
        -0.10937149937394268,
        -0.76,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-0",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 97
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-1",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.03553695435311893,
        -0.10937149937394268,
        -0.545,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-1",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 98
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-2",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.03553695435311893,
        -0.10937149937394268,
        -0.33,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-2",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 99
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-3",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.03553695435311893,
        -0.10937149937394268,
        -0.11499999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-3",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 100
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-4",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.03553695435311893,
        -0.10937149937394268,
        0.09999999999999998,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-4",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 101
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-5",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.03553695435311893,
        -0.10937149937394268,
        0.31499999999999995,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-5",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 102
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-6",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.03553695435311893,
        -0.10937149937394268,
        0.53,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-6",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 103
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-7",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.03553695435311893,
        -0.10937149937394268,
        0.7449999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-8-7",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 104
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-0",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.09303695435311894,
        -0.06759530401363444,
        -0.76,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-0",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 105
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-1",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.09303695435311894,
        -0.06759530401363444,
        -0.545,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-1",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 106
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-2",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.09303695435311894,
        -0.06759530401363444,
        -0.33,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-2",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 107
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-3",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.09303695435311894,
        -0.06759530401363444,
        -0.11499999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-3",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 108
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-4",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.09303695435311894,
        -0.06759530401363444,
        0.09999999999999998,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-4",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 109
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-5",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.09303695435311894,
        -0.06759530401363444,
        0.31499999999999995,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-5",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 110
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-6",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.09303695435311894,
        -0.06759530401363444,
        0.53,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-6",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 111
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-7",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.09303695435311894,
        -0.06759530401363444,
        0.7449999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/plucker-roll/tooth-9-7",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.00055,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 112
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/suction-neck",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.74,
        0.2,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/suction-neck",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "hollow_port",
        "BOMqty": 1
      },
      "gltfNode": 113
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/t01-01-automatic-bale-plucker:fiber-suction-port",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -2.220446049250313e-16,
        1.0000000000000002,
        0,
        0,
        -1.0000000000000002,
        -2.220446049250313e-16,
        0,
        0,
        1.94,
        0.2,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker:fiber-suction-port"
      },
      "gltfNode": 114
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker/t01-01-automatic-bale-plucker:plucking-contact-port",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/lifting-plucker",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -2.220446049250313e-16,
        1.0000000000000002,
        0,
        0,
        -1.0000000000000002,
        -2.220446049250313e-16,
        0,
        0,
        1.0275,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker:plucking-contact-port"
      },
      "gltfNode": 115
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/brand-standoff",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.45,
        -0.9,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/brand-standoff",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.13,
            "depth": 0.2,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 116
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/brand-panel",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.45,
        -0.83,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/brand-panel",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.65,
            "height": 0.27,
            "depth": 0.1,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 117
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.45,
        -0.768,
        1
      ],
      "sourceUserData": {
        "partId": "DS_Brand_Plate",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 118
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate/badge-bezel",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate/badge-bezel",
        "assetId": "t01-01-automatic-bale-plucker",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 119
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate/badge-backing",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate/badge-backing",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 120
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate/badge-rivet-0",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.24365000000000003,
        -0.06365,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate/badge-rivet-0",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 121
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate/badge-rivet-1",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.24365000000000003,
        0.06365,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate/badge-rivet-1",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 122
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate/badge-rivet-2",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.24365000000000003,
        -0.06365,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate/badge-rivet-2",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 123
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate/badge-rivet-3",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.24365000000000003,
        0.06365,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate/badge-rivet-3",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 124
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate/badge-D",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.11019999999999999,
        0,
        0,
        0,
        0,
        0.11019999999999999,
        0,
        0,
        0,
        0,
        0.011250000000000001,
        0,
        -0.048487999999999996,
        0,
        0.010812500000000001,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate/badge-D",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 125
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate/badge-S",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.11019999999999999,
        0,
        0,
        0,
        0,
        0.11019999999999999,
        0,
        0,
        0,
        0,
        0.011250000000000001,
        0,
        0.048487999999999996,
        0,
        0.010812500000000001,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate/badge-S",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 126
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate/badge-D-back",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.11019999999999999,
        0,
        -1.3495607726603832e-17,
        0,
        0,
        0.11019999999999999,
        0,
        0,
        1.3777276490407726e-18,
        0,
        -0.011250000000000001,
        0,
        0.048487999999999996,
        0,
        -0.010812500000000001,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate/badge-D-back",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 127
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate/badge-S-back",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.11019999999999999,
        0,
        -1.3495607726603832e-17,
        0,
        0,
        0.11019999999999999,
        0,
        0,
        1.3777276490407726e-18,
        0,
        -0.011250000000000001,
        0,
        -0.048487999999999996,
        0,
        -0.010812500000000001,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/travel-tower/DS_Brand_Plate/badge-S-back",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 128
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "preview-cotton-bales",
        "componentRole": "preview_workpiece",
        "previewOnly": true
      },
      "gltfNode": 129
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/cotton-bale-0",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.6,
        0.56,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/cotton-bale-0",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "previewOnly": true
      },
      "gltfNode": 130
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/bale-strap-0--0.35",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.95,
        0.56,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/bale-strap-0--0.35",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "previewOnly": true
      },
      "gltfNode": 131
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/bale-strap-0-0.35",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.25,
        0.56,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/bale-strap-0-0.35",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "previewOnly": true
      },
      "gltfNode": 132
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/cotton-bale-1",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3,
        0.56,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/cotton-bale-1",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "previewOnly": true
      },
      "gltfNode": 133
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/bale-strap-1--0.35",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.65,
        0.56,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/bale-strap-1--0.35",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "previewOnly": true
      },
      "gltfNode": 134
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/bale-strap-1-0.35",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.9500000000000001,
        0.56,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/bale-strap-1-0.35",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "previewOnly": true
      },
      "gltfNode": 135
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/cotton-bale-2",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.56,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/cotton-bale-2",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "previewOnly": true
      },
      "gltfNode": 136
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/bale-strap-2--0.35",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.35,
        0.56,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/bale-strap-2--0.35",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "previewOnly": true
      },
      "gltfNode": 137
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/bale-strap-2-0.35",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.35,
        0.56,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/bale-strap-2-0.35",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "previewOnly": true
      },
      "gltfNode": 138
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/cotton-bale-3",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3000000000000003,
        0.56,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/cotton-bale-3",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "previewOnly": true
      },
      "gltfNode": 139
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/bale-strap-3--0.35",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.9500000000000003,
        0.56,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/bale-strap-3--0.35",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "previewOnly": true
      },
      "gltfNode": 140
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/bale-strap-3-0.35",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.6500000000000004,
        0.56,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/bale-strap-3-0.35",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "previewOnly": true
      },
      "gltfNode": 141
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/cotton-bale-4",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.6,
        0.56,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/cotton-bale-4",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "previewOnly": true
      },
      "gltfNode": 142
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/bale-strap-4--0.35",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.25,
        0.56,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/bale-strap-4--0.35",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "previewOnly": true
      },
      "gltfNode": 143
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/bale-strap-4-0.35",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.95,
        0.56,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/preview-cotton-bales/bale-strap-4-0.35",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "previewOnly": true
      },
      "gltfNode": 144
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/bale-pallet-0",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.6,
        0.06,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/bale-pallet-0",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.2,
            "height": 0.12,
            "depth": 1.32,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 145
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/bale-pallet-1",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3,
        0.06,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/bale-pallet-1",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.2,
            "height": 0.12,
            "depth": 1.32,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 146
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/bale-pallet-2",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.06,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/bale-pallet-2",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.2,
            "height": 0.12,
            "depth": 1.32,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 147
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/bale-pallet-3",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3000000000000003,
        0.06,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/bale-pallet-3",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.2,
            "height": 0.12,
            "depth": 1.32,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 148
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/bale-pallet-4",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.6,
        0.06,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/bale-pallet-4",
        "assetId": "t01-01-automatic-bale-plucker",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.2,
            "height": 0.12,
            "depth": 1.32,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 149
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/t01-01-automatic-bale-plucker:bale-line-datum",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.2,
        1,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker:bale-line-datum"
      },
      "gltfNode": 150
    },
    {
      "id": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base/t01-01-automatic-bale-plucker:travel-datum",
      "parent": "t01-01-automatic-bale-plucker/t01-01-automatic-bale-plucker:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.28,
        -1.05,
        1
      ],
      "sourceUserData": {
        "partId": "t01-01-automatic-bale-plucker:travel-datum"
      },
      "gltfNode": 151
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "배정 패킷의 기능 범위에 따른 자체 형상·치수. 외부 CAD/제품사진/제조사 정격을 사용하지 않음."
    }
  ],
  "rights": {
    "id": "t01-01-automatic-bale-plucker",
    "assetTypeId": "t01-01-automatic-bale-plucker",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:06a0858deb197bebc26fa8f89ed9f42e517baa10789f9d769814cf26a445fcc9",
    "modelSource": "kit/models/t01-01-automatic-bale-plucker.mjs",
    "dslExampleSource": "dsl/models/t01-01-automatic-bale-plucker.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/t01-01-automatic-bale-plucker.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/t01-01-automatic-bale-plucker.txt",
      "sha256": "sha256:480f5e81162ab25217d0367aaab72e7e12d49ae0d4f67f22469bba325be44f31",
      "bytes": 811
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/t01-01-automatic-bale-plucker/model.glb",
      "bytes": 938168,
      "sha256": "sha256:95247ca16d926bfb20379d98b8c91b9275c598efce99545310a0223467f125b9"
    },
    "licenses": [
      {
        "path": "open-assets/t01-01-automatic-bale-plucker/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/t01-01-automatic-bale-plucker/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/t01-01-automatic-bale-plucker/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/t01-01-automatic-bale-plucker/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/t01-01-automatic-bale-plucker/LICENSES/ASSET-NOTICES/t01-01-automatic-bale-plucker.txt",
        "bytes": 811,
        "sha256": "sha256:480f5e81162ab25217d0367aaab72e7e12d49ae0d4f67f22469bba325be44f31"
      }
    ],
    "source": {
      "path": "kit/models/t01-01-automatic-bale-plucker.mjs",
      "bytes": 11314,
      "sha256": "sha256:06a0858deb197bebc26fa8f89ed9f42e517baa10789f9d769814cf26a445fcc9"
    },
    "ds2": {
      "path": "dsl/models/t01-01-automatic-bale-plucker.ds2",
      "bytes": 3485,
      "sha256": "sha256:8ffbe2c9f17e3ead9879a2773f87097d6682fef4bfe3e7c543858689032b4d92",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 152,
    "triangles": 50556,
    "maxMatrixError": 4.930380657631324e-32,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 14,
    "nodeComparisons": 2128,
    "semanticFrameComparisons": 70,
    "acceptanceCases": 5,
    "acceptanceFrameComparisons": 25,
    "maxMotionMatrixError": 4.930380657631324e-32
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "t01-01-automatic-bale-plucker",
    "kind": "equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "T 섬유와 의류 / T01 방적",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "work": {
        "frameId": "plucking-contact-port",
        "portClass": "process",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            1.0275,
            0.32
          ],
          "quaternion": [
            0.7071067811865476,
            0,
            0,
            0.7071067811865475
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "outlet": {
        "frameId": "fiber-suction-port",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            1.94,
            0.2
          ],
          "quaternion": [
            0.7071067811865476,
            0,
            0,
            0.7071067811865475
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "inlet": {
        "frameId": "bale-line-datum",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -3.2,
            1,
            0.32
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "datum": {
        "frameId": "travel-datum",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0.28,
            -1.05
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
