{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
  "assetTypeId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
  "label": "캡 포일 유도 실러",
  "category": "packaging-dosing / closure-sealing",
  "description": "Actual retained hollow induction-head coil/ferrite hardware on a guided height setup, separate generator housing and physical power-setting potentiometer shaft. Planned induction ratio maps only normalized actual knob angle as MECHANICAL_COMMAND_POSITION; no calibrated field/heating/foil adhesion or achieved electrical value.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -0.4000000059604645,
      2.2351741811588166e-10,
      -0.3630000000260771
    ],
    "max": [
      0.4000000059604645,
      0.8300000107288361,
      0.3499999940395355
    ]
  },
  "size": [
    0.800000011920929,
    0.8300000105053187,
    0.7129999940656127
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 0,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 0,
      "blindSocketHeads": 0,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 0,
    "warnings": [
      "NO_APPLICABLE_MANUFACTURING_PRIMITIVE_REQUIRES_MODEL_SPECIFIC_REVIEW"
    ],
    "changedMeshes": 0,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 42556,
      "afterTriangles": 42556,
      "reachedTarget": true,
      "changedMeshes": 0,
      "changes": [],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/t-eef7f408-bc0c-5e04-863d-31c441c380c8.mjs",
    "sourceSha256": "sha256:fa7bfa78396021f5cb98afdeeea974ae6aad6164b94b0b9b21a1afee1a41c1b5",
    "deliverySha256": "sha256:fa7bfa78396021f5cb98afdeeea974ae6aad6164b94b0b9b21a1afee1a41c1b5",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:62085d87a106c71a46bfe6711f135117c09c3f8b63c4af7d7b01624c15e9215a",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:62085d87a106c71a46bfe6711f135117c09c3f8b63c4af7d7b01624c15e9215a",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [
    {
      "id": "head_width",
      "type": "number",
      "unit": "m",
      "min": 0.28,
      "max": 0.32,
      "default": 0.3
    }
  ],
  "parameterValues": {
    "head_width": 0.3
  },
  "joints": [
    {
      "id": "head_height",
      "label": "head_height",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "min": 0,
      "max": 0.1,
      "initial": 0,
      "unit": "m"
    },
    {
      "id": "induction_command_knob",
      "label": "induction_command_knob",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "min": 0,
      "max": 4.71238898038469,
      "initial": 0,
      "unit": "rad"
    }
  ],
  "initialState": {
    "head_height": 0,
    "induction_command_knob": 0
  },
  "bindings": [
    {
      "id": "head_height",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "gltfNode": 71
    },
    {
      "id": "induction_command_knob",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0.26,
        -0.195
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-manual-command-potentiometer-shaft",
      "gltfNode": 146
    }
  ],
  "jointBindings": [
    {
      "id": "head_height",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "gltfNode": 71
    },
    {
      "id": "induction_command_knob",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0.26,
        -0.195
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-manual-command-potentiometer-shaft",
      "gltfNode": 146
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "nodeName": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "coil_terminal_1": {
      "id": "coil_terminal_1",
      "node": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/t-eef7f408-bc0c-5e04-863d-31c441c380c8:coil_terminal_1",
      "nodeName": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/t-eef7f408-bc0c-5e04-863d-31c441c380c8:coil_terminal_1",
      "gltfNode": 98,
      "matrix": [
        -1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        -1,
        0,
        0.02,
        0.305,
        -0.11,
        1
      ],
      "position": [
        0.02,
        0.305,
        -0.11
      ],
      "quaternion": [
        0,
        1,
        0,
        0
      ]
    },
    "coil_terminal_2": {
      "id": "coil_terminal_2",
      "node": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/t-eef7f408-bc0c-5e04-863d-31c441c380c8:coil_terminal_2",
      "nodeName": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/t-eef7f408-bc0c-5e04-863d-31c441c380c8:coil_terminal_2",
      "gltfNode": 102,
      "matrix": [
        -1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        -1,
        0,
        -0.075,
        0.315,
        -0.11,
        1
      ],
      "position": [
        -0.075,
        0.315,
        -0.11
      ],
      "quaternion": [
        0,
        1,
        0,
        0
      ]
    },
    "mechanical-command-pointer": {
      "id": "mechanical-command-pointer",
      "node": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-manual-command-potentiometer-shaft/t-eef7f408-bc0c-5e04-863d-31c441c380c8:mechanical-command-pointer",
      "nodeName": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-manual-command-potentiometer-shaft/t-eef7f408-bc0c-5e04-863d-31c441c380c8:mechanical-command-pointer",
      "gltfNode": 150,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.012,
        0.26,
        -0.185,
        1
      ],
      "position": [
        0.012,
        0.26,
        -0.185
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "mount": {
      "id": "mount",
      "node": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/t-eef7f408-bc0c-5e04-863d-31c441c380c8:mount",
      "nodeName": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/t-eef7f408-bc0c-5e04-863d-31c441c380c8:mount",
      "gltfNode": 151,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        0.9999999999999998,
        0,
        0,
        -0.9999999999999998,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0.7071067811865475,
        0,
        0,
        0.7071067811865476
      ]
    },
    "infeed": {
      "id": "infeed",
      "node": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/t-eef7f408-bc0c-5e04-863d-31c441c380c8:infeed",
      "nodeName": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/t-eef7f408-bc0c-5e04-863d-31c441c380c8:infeed",
      "gltfNode": 152,
      "matrix": [
        2.220446049250313e-16,
        0,
        0.9999999999999998,
        0,
        0,
        1,
        0,
        0,
        -0.9999999999999998,
        0,
        2.220446049250313e-16,
        0,
        -0.35,
        0.15,
        0,
        1
      ],
      "position": [
        -0.35,
        0.15,
        0
      ],
      "quaternion": [
        0,
        -0.7071067811865475,
        0,
        0.7071067811865476
      ]
    },
    "outfeed": {
      "id": "outfeed",
      "node": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/t-eef7f408-bc0c-5e04-863d-31c441c380c8:outfeed",
      "nodeName": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/t-eef7f408-bc0c-5e04-863d-31c441c380c8:outfeed",
      "gltfNode": 153,
      "matrix": [
        2.220446049250313e-16,
        0,
        -0.9999999999999998,
        0,
        0,
        1,
        0,
        0,
        0.9999999999999998,
        0,
        2.220446049250313e-16,
        0,
        0.35,
        0.15,
        0,
        1
      ],
      "position": [
        0.35,
        0.15,
        0
      ],
      "quaternion": [
        0,
        0.7071067811865475,
        0,
        0.7071067811865476
      ]
    },
    "work": {
      "id": "work",
      "node": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/t-eef7f408-bc0c-5e04-863d-31c441c380c8:work",
      "nodeName": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/t-eef7f408-bc0c-5e04-863d-31c441c380c8:work",
      "gltfNode": 154,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -0.9999999999999998,
        0,
        0,
        0.9999999999999998,
        2.220446049250313e-16,
        0,
        0,
        0.22,
        0,
        1
      ],
      "position": [
        0,
        0.22,
        0
      ],
      "quaternion": [
        -0.7071067811865475,
        0,
        0,
        0.7071067811865476
      ]
    },
    "head-window": {
      "id": "head-window",
      "node": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/t-eef7f408-bc0c-5e04-863d-31c441c380c8:head-window",
      "nodeName": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/t-eef7f408-bc0c-5e04-863d-31c441c380c8:head-window",
      "gltfNode": 103,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        0.9999999999999998,
        0,
        0,
        -0.9999999999999998,
        2.220446049250313e-16,
        0,
        0,
        0.262,
        0,
        1
      ],
      "position": [
        0,
        0.262,
        0
      ],
      "quaternion": [
        0.7071067811865475,
        0,
        0,
        0.7071067811865476
      ]
    }
  },
  "ports": {
    "mount": "mount",
    "infeed": "infeed",
    "outfeed": "outfeed",
    "work": "work",
    "command": "mechanical-command-pointer",
    "head": "head-window",
    "coil_terminal_1": "coil_terminal_1",
    "coil_terminal_2": "coil_terminal_2"
  },
  "nodes": [
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 0,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 0,
            "blindSocketHeads": 0,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 0,
          "warnings": [
            "NO_APPLICABLE_MANUFACTURING_PRIMITIVE_REQUIRES_MODEL_SPECIFIC_REVIEW"
          ],
          "changedMeshes": 0,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 42556,
            "afterTriangles": 42556,
            "reachedTarget": true,
            "changedMeshes": 0,
            "changes": [],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
          "coordinate_profile": "lib3d-world/1",
          "label": "캡 포일 유도 실러",
          "category": "packaging-dosing/closure-sealing",
          "summary": "Actual retained hollow induction-head coil/ferrite hardware on a guided height setup, separate generator housing and physical power-setting potentiometer shaft. Planned induction ratio maps only normalized actual knob angle as MECHANICAL_COMMAND_POSITION; no calibrated field/heating/foil adhesion or achieved electrical value.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [
            {
              "id": "head_width",
              "type": "number",
              "unit": "m",
              "min": 0.28,
              "max": 0.32,
              "default": 0.3
            }
          ],
          "joints": [
            {
              "id": "head_height",
              "label": "head_height",
              "kind": "prismatic",
              "axis": [
                0,
                1,
                0
              ],
              "min": 0,
              "max": 0.1,
              "initial": 0,
              "unit": "m"
            },
            {
              "id": "induction_command_knob",
              "label": "induction_command_knob",
              "kind": "revolute",
              "axis": [
                0,
                0,
                1
              ],
              "min": 0,
              "max": 4.71238898038469,
              "initial": 0,
              "unit": "rad"
            }
          ],
          "ports": {
            "mount": "mount",
            "infeed": "infeed",
            "outfeed": "outfeed",
            "work": "work",
            "command": "mechanical-command-pointer",
            "head": "head-window",
            "coil_terminal_1": "coil_terminal_1",
            "coil_terminal_2": "coil_terminal_2"
          },
          "required_host_features": [
            "prismatic",
            "revolute"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "Own nominal architecture in metres/radians. No manufacturer CAD, ratings, physical or control certification."
            }
          ],
          "conservative_bounds_m": {
            "min": [
              -0.401,
              -0.001,
              -0.371
            ],
            "max": [
              0.401,
              0.851,
              0.351
            ]
          },
          "readiness": {
            "display": "DISPLAY_PREVIEW",
            "core_verified": false,
            "physical_execution_eligible": false
          },
          "expansionCandidate": {
            "sourceCandidateId": "induction-cap-foil-sealer",
            "candidateId": "packaging-dosing.induction-cap-foil-sealer",
            "stableKey": "lib3d:type:v1:packaging-dosing/closure-sealing/induction-cap-foil-sealer",
            "typeUid": "urn:uuid:eef7f408-bc0c-5e04-863d-31c441c380c8",
            "displayCode": "L3D-000886",
            "deliveryAssetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8"
          },
          "installation": {
            "mode": "MOUNTED_COMPONENT",
            "datumFrame": "mount",
            "floorPolicy": "NOT_APPLICABLE_WITHOUT_EXTERNAL_INSTALLATION",
            "basis": "Nominal flange datum; external world installation NOT_RUN."
          },
          "sourcePreviewTrajectory": {
            "schema": "lib3d-source-preview-trajectory/1",
            "durationMs": 3000,
            "keyframes": [
              {
                "timeMs": 0,
                "state": {
                  "head_height": 0,
                  "induction_command_knob": 0
                }
              },
              {
                "timeMs": 1000,
                "state": {
                  "head_height": 0.1,
                  "induction_command_knob": 4.71238898038469
                }
              },
              {
                "timeMs": 2000,
                "state": {
                  "head_height": 0.05,
                  "induction_command_knob": 2.356194490192345
                }
              },
              {
                "timeMs": 3000,
                "state": {
                  "head_height": 0,
                  "induction_command_knob": 0
                }
              }
            ],
            "scope": "DISPLAY_PREVIEW",
            "physicalExecution": "NOT_RUN"
          },
          "coarseRadialSegments": 12,
          "known_limitations": [
            "Actual retained hollow induction-head coil/ferrite hardware on a guided height setup, separate generator housing and physical power-setting potentiometer shaft. Planned induction ratio maps only normalized actual knob angle as MECHANICAL_COMMAND_POSITION; no calibrated field/heating/foil adhesion or achieved electrical value.",
            "Own nominal rigid geometry/commanded poses only. No actual material flow, deformation, force, measurements, autonomous timing, physical installation or process achievement."
          ],
          "semanticActuationMappings": [
            {
              "semanticId": "induction",
              "semanticKind": "actuation",
              "semanticUnit": "ratio",
              "sdkJointId": "induction_command_knob",
              "sdkKind": "revolute",
              "sdkUnit": "rad",
              "semanticRange": [
                0,
                1
              ],
              "sdkRange": [
                0,
                4.71238898038469
              ],
              "formula": "sdkAngleRad = semanticCommand * (3*pi/2)",
              "scope": "DISPLAY_PREVIEW",
              "meaning": "Actual manual generator setting potentiometer shaft angle only; no calibrated/current/field/heating/seal result."
            }
          ],
          "componentSimulationExclusions": {
            "externalBottleCapFoil": "NOT_MODELED",
            "achievedInductionFieldCurrentHeatingSeal": null,
            "commandMeaning": "Actual mechanical generator setting knob position only, not achieved irradiance/current/field/heating.",
            "externalCoilPowerConnections": "NOT_MODELED; actual moving coil terminals exposed.",
            "staticConveyor": "Unloaded retained rollers at reference angle; product transport not simulated.",
            "staticJournalClearanceM": 0.0003,
            "staticJournalAxialEndplayM": 0.001,
            "staticJournalRetention": "Real fixed bored bushes, inner sleeves and two thrust collars. Intentional separate reference rigid bodies, no fake bridge or bearing force simulation."
          },
          "measurementPolicy": {
            "measuredValue": null,
            "measuredQuality": "UNKNOWN",
            "scope": "Geometry, mechanical command and functional datums only. Sensor output/force/field/chemistry/flow/calibration NOT_RUN."
          },
          "sdk_version": "1.1.0"
        },
        "parameters": {
          "head_width": 0.3
        },
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
          "coil_terminal_1": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/t-eef7f408-bc0c-5e04-863d-31c441c380c8:coil_terminal_1",
          "coil_terminal_2": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/t-eef7f408-bc0c-5e04-863d-31c441c380c8:coil_terminal_2",
          "mechanical-command-pointer": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-manual-command-potentiometer-shaft/t-eef7f408-bc0c-5e04-863d-31c441c380c8:mechanical-command-pointer",
          "mount": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/t-eef7f408-bc0c-5e04-863d-31c441c380c8:mount",
          "infeed": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/t-eef7f408-bc0c-5e04-863d-31c441c380c8:infeed",
          "outfeed": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/t-eef7f408-bc0c-5e04-863d-31c441c380c8:outfeed",
          "work": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/t-eef7f408-bc0c-5e04-863d-31c441c380c8:work",
          "head-window": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/t-eef7f408-bc0c-5e04-863d-31c441c380c8:head-window"
        },
        "jointBindings": [
          {
            "id": "head_height",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head"
          },
          {
            "id": "induction_command_knob",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0,
              0.26,
              -0.195
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-manual-command-potentiometer-shaft"
          }
        ],
        "joints": [
          {
            "id": "head_height",
            "label": "head_height",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "min": 0,
            "max": 0.1,
            "initial": 0,
            "unit": "m",
            "value": 0
          },
          {
            "id": "induction_command_knob",
            "label": "induction_command_knob",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "min": 0,
            "max": 4.71238898038469,
            "initial": 0,
            "unit": "rad",
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 148
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "Own nominal architecture in metres/radians. No manufacturer CAD, ratings, physical or control certification."
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "head_height": 0,
          "induction_command_knob": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
        "hardware": "Actual fixed copper pancake winding, dielectric window/rest saddles/ferrite backing, moving head on real retained guides; real generator cabinet/core/capacitors and manual potentiometer shaft.",
        "semanticInduction": "Normalized input maps only to actual mechanical setting knob angle. No calibrated linear relation to current, field, irradiance, temperature or seal.",
        "measuredCurrentFieldHeatingSeal": null,
        "externalBottleCapFoilPowerCables": "NOT_MODELED",
        "staticConveyor": "Unloaded reference-angle retained rollers; transport/product response NOT_SIMULATED",
        "scope": "DISPLAY_PREVIEW",
        "core_verified": false,
        "physical_execution_eligible": false,
        "assemblyRole": "reusable-mechanism",
        "BOMqty": 1
      },
      "gltfNode": 1
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-induction-unit-four-anchor-foundation",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.01,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-induction-unit-four-anchor-foundation",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-plate",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualThroughHoles": 4,
        "actualWindows": 0
      },
      "gltfNode": 2
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-retained-static-roller-channel--0.145",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.128,
        -0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-retained-static-roller-channel--0.145",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-plate",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualThroughHoles": 9,
        "actualWindows": 0
      },
      "gltfNode": 3
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-static-conveyor-load-foot--0.145--0.3",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.3,
        0.0565,
        -0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-static-conveyor-load-foot--0.145--0.3",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 4
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-static-conveyor-load-foot--0.145-0.3",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.3,
        0.0565,
        -0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-static-conveyor-load-foot--0.145-0.3",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 5
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-retained-static-roller-channel-0.145",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.128,
        0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-retained-static-roller-channel-0.145",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-plate",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualThroughHoles": 9,
        "actualWindows": 0
      },
      "gltfNode": 6
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-static-conveyor-load-foot-0.145--0.3",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.3,
        0.0565,
        0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-static-conveyor-load-foot-0.145--0.3",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 7
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-static-conveyor-load-foot-0.145-0.3",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.3,
        0.0565,
        0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-static-conveyor-load-foot-0.145-0.3",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 8
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-pose-unloaded-transport-roller--0.26",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.26,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-pose-unloaded-transport-roller--0.26",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1
      },
      "gltfNode": 9
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-retained-static-roller-shaft--0.26",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.26,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-retained-static-roller-shaft--0.26",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 10
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush--0.26--1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.26,
        0.128,
        -0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush--0.26--1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-fixed-plain-journal-bush",
        "actualBoreDiameterM": 0.012,
        "actualStaticBearingInterface": true
      },
      "gltfNode": 11
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer--0.26--1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        -0.26,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer--0.26--1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-monolithic-inner-journal-sleeve-and-thrust-retainer",
        "actualStaticBearingInterface": true,
        "actualBoreDiameterM": 0.0096,
        "nominalRadialClearanceM": 0.0003,
        "nominalAxialEndplayM": 0.001,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 12
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush--0.26-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.26,
        0.128,
        0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush--0.26-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-fixed-plain-journal-bush",
        "actualBoreDiameterM": 0.012,
        "actualStaticBearingInterface": true
      },
      "gltfNode": 13
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer--0.26-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.26,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer--0.26-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-monolithic-inner-journal-sleeve-and-thrust-retainer",
        "actualStaticBearingInterface": true,
        "actualBoreDiameterM": 0.0096,
        "nominalRadialClearanceM": 0.0003,
        "nominalAxialEndplayM": 0.001,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 14
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-pose-unloaded-transport-roller--0.195",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.195,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-pose-unloaded-transport-roller--0.195",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1
      },
      "gltfNode": 15
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-retained-static-roller-shaft--0.195",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.195,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-retained-static-roller-shaft--0.195",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 16
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush--0.195--1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.195,
        0.128,
        -0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush--0.195--1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-fixed-plain-journal-bush",
        "actualBoreDiameterM": 0.012,
        "actualStaticBearingInterface": true
      },
      "gltfNode": 17
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer--0.195--1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        -0.195,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer--0.195--1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-monolithic-inner-journal-sleeve-and-thrust-retainer",
        "actualStaticBearingInterface": true,
        "actualBoreDiameterM": 0.0096,
        "nominalRadialClearanceM": 0.0003,
        "nominalAxialEndplayM": 0.001,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 18
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush--0.195-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.195,
        0.128,
        0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush--0.195-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-fixed-plain-journal-bush",
        "actualBoreDiameterM": 0.012,
        "actualStaticBearingInterface": true
      },
      "gltfNode": 19
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer--0.195-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.195,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer--0.195-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-monolithic-inner-journal-sleeve-and-thrust-retainer",
        "actualStaticBearingInterface": true,
        "actualBoreDiameterM": 0.0096,
        "nominalRadialClearanceM": 0.0003,
        "nominalAxialEndplayM": 0.001,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 20
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-pose-unloaded-transport-roller--0.13",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.13,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-pose-unloaded-transport-roller--0.13",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1
      },
      "gltfNode": 21
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-retained-static-roller-shaft--0.13",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.13,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-retained-static-roller-shaft--0.13",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 22
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush--0.13--1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.13,
        0.128,
        -0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush--0.13--1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-fixed-plain-journal-bush",
        "actualBoreDiameterM": 0.012,
        "actualStaticBearingInterface": true
      },
      "gltfNode": 23
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer--0.13--1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        -0.13,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer--0.13--1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-monolithic-inner-journal-sleeve-and-thrust-retainer",
        "actualStaticBearingInterface": true,
        "actualBoreDiameterM": 0.0096,
        "nominalRadialClearanceM": 0.0003,
        "nominalAxialEndplayM": 0.001,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 24
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush--0.13-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.13,
        0.128,
        0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush--0.13-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-fixed-plain-journal-bush",
        "actualBoreDiameterM": 0.012,
        "actualStaticBearingInterface": true
      },
      "gltfNode": 25
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer--0.13-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.13,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer--0.13-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-monolithic-inner-journal-sleeve-and-thrust-retainer",
        "actualStaticBearingInterface": true,
        "actualBoreDiameterM": 0.0096,
        "nominalRadialClearanceM": 0.0003,
        "nominalAxialEndplayM": 0.001,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 26
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-pose-unloaded-transport-roller--0.065",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.065,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-pose-unloaded-transport-roller--0.065",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1
      },
      "gltfNode": 27
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-retained-static-roller-shaft--0.065",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.065,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-retained-static-roller-shaft--0.065",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 28
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush--0.065--1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.065,
        0.128,
        -0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush--0.065--1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-fixed-plain-journal-bush",
        "actualBoreDiameterM": 0.012,
        "actualStaticBearingInterface": true
      },
      "gltfNode": 29
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer--0.065--1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        -0.065,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer--0.065--1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-monolithic-inner-journal-sleeve-and-thrust-retainer",
        "actualStaticBearingInterface": true,
        "actualBoreDiameterM": 0.0096,
        "nominalRadialClearanceM": 0.0003,
        "nominalAxialEndplayM": 0.001,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 30
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush--0.065-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.065,
        0.128,
        0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush--0.065-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-fixed-plain-journal-bush",
        "actualBoreDiameterM": 0.012,
        "actualStaticBearingInterface": true
      },
      "gltfNode": 31
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer--0.065-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.065,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer--0.065-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-monolithic-inner-journal-sleeve-and-thrust-retainer",
        "actualStaticBearingInterface": true,
        "actualBoreDiameterM": 0.0096,
        "nominalRadialClearanceM": 0.0003,
        "nominalAxialEndplayM": 0.001,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 32
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-pose-unloaded-transport-roller-0",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-pose-unloaded-transport-roller-0",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1
      },
      "gltfNode": 33
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-retained-static-roller-shaft-0",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-retained-static-roller-shaft-0",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 34
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush-0--1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.128,
        -0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush-0--1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-fixed-plain-journal-bush",
        "actualBoreDiameterM": 0.012,
        "actualStaticBearingInterface": true
      },
      "gltfNode": 35
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer-0--1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer-0--1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-monolithic-inner-journal-sleeve-and-thrust-retainer",
        "actualStaticBearingInterface": true,
        "actualBoreDiameterM": 0.0096,
        "nominalRadialClearanceM": 0.0003,
        "nominalAxialEndplayM": 0.001,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 36
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush-0-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.128,
        0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush-0-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-fixed-plain-journal-bush",
        "actualBoreDiameterM": 0.012,
        "actualStaticBearingInterface": true
      },
      "gltfNode": 37
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer-0-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer-0-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-monolithic-inner-journal-sleeve-and-thrust-retainer",
        "actualStaticBearingInterface": true,
        "actualBoreDiameterM": 0.0096,
        "nominalRadialClearanceM": 0.0003,
        "nominalAxialEndplayM": 0.001,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 38
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-pose-unloaded-transport-roller-0.065",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.065,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-pose-unloaded-transport-roller-0.065",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1
      },
      "gltfNode": 39
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-retained-static-roller-shaft-0.065",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.065,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-retained-static-roller-shaft-0.065",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 40
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush-0.065--1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.065,
        0.128,
        -0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush-0.065--1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-fixed-plain-journal-bush",
        "actualBoreDiameterM": 0.012,
        "actualStaticBearingInterface": true
      },
      "gltfNode": 41
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer-0.065--1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0.065,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer-0.065--1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-monolithic-inner-journal-sleeve-and-thrust-retainer",
        "actualStaticBearingInterface": true,
        "actualBoreDiameterM": 0.0096,
        "nominalRadialClearanceM": 0.0003,
        "nominalAxialEndplayM": 0.001,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 42
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush-0.065-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.065,
        0.128,
        0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush-0.065-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-fixed-plain-journal-bush",
        "actualBoreDiameterM": 0.012,
        "actualStaticBearingInterface": true
      },
      "gltfNode": 43
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer-0.065-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.065,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer-0.065-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-monolithic-inner-journal-sleeve-and-thrust-retainer",
        "actualStaticBearingInterface": true,
        "actualBoreDiameterM": 0.0096,
        "nominalRadialClearanceM": 0.0003,
        "nominalAxialEndplayM": 0.001,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 44
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-pose-unloaded-transport-roller-0.13",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.13,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-pose-unloaded-transport-roller-0.13",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1
      },
      "gltfNode": 45
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-retained-static-roller-shaft-0.13",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.13,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-retained-static-roller-shaft-0.13",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 46
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush-0.13--1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.13,
        0.128,
        -0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush-0.13--1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-fixed-plain-journal-bush",
        "actualBoreDiameterM": 0.012,
        "actualStaticBearingInterface": true
      },
      "gltfNode": 47
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer-0.13--1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0.13,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer-0.13--1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-monolithic-inner-journal-sleeve-and-thrust-retainer",
        "actualStaticBearingInterface": true,
        "actualBoreDiameterM": 0.0096,
        "nominalRadialClearanceM": 0.0003,
        "nominalAxialEndplayM": 0.001,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 48
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush-0.13-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.13,
        0.128,
        0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush-0.13-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-fixed-plain-journal-bush",
        "actualBoreDiameterM": 0.012,
        "actualStaticBearingInterface": true
      },
      "gltfNode": 49
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer-0.13-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.13,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer-0.13-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-monolithic-inner-journal-sleeve-and-thrust-retainer",
        "actualStaticBearingInterface": true,
        "actualBoreDiameterM": 0.0096,
        "nominalRadialClearanceM": 0.0003,
        "nominalAxialEndplayM": 0.001,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 50
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-pose-unloaded-transport-roller-0.195",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.195,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-pose-unloaded-transport-roller-0.195",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1
      },
      "gltfNode": 51
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-retained-static-roller-shaft-0.195",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.195,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-retained-static-roller-shaft-0.195",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 52
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush-0.195--1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.195,
        0.128,
        -0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush-0.195--1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-fixed-plain-journal-bush",
        "actualBoreDiameterM": 0.012,
        "actualStaticBearingInterface": true
      },
      "gltfNode": 53
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer-0.195--1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0.195,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer-0.195--1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-monolithic-inner-journal-sleeve-and-thrust-retainer",
        "actualStaticBearingInterface": true,
        "actualBoreDiameterM": 0.0096,
        "nominalRadialClearanceM": 0.0003,
        "nominalAxialEndplayM": 0.001,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 54
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush-0.195-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.195,
        0.128,
        0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush-0.195-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-fixed-plain-journal-bush",
        "actualBoreDiameterM": 0.012,
        "actualStaticBearingInterface": true
      },
      "gltfNode": 55
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer-0.195-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.195,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer-0.195-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-monolithic-inner-journal-sleeve-and-thrust-retainer",
        "actualStaticBearingInterface": true,
        "actualBoreDiameterM": 0.0096,
        "nominalRadialClearanceM": 0.0003,
        "nominalAxialEndplayM": 0.001,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 56
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-pose-unloaded-transport-roller-0.26",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.26,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-pose-unloaded-transport-roller-0.26",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1
      },
      "gltfNode": 57
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-retained-static-roller-shaft-0.26",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.26,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-retained-static-roller-shaft-0.26",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 58
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush-0.26--1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.26,
        0.128,
        -0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush-0.26--1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-fixed-plain-journal-bush",
        "actualBoreDiameterM": 0.012,
        "actualStaticBearingInterface": true
      },
      "gltfNode": 59
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer-0.26--1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0.26,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer-0.26--1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-monolithic-inner-journal-sleeve-and-thrust-retainer",
        "actualStaticBearingInterface": true,
        "actualBoreDiameterM": 0.0096,
        "nominalRadialClearanceM": 0.0003,
        "nominalAxialEndplayM": 0.001,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 60
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush-0.26-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.26,
        0.128,
        0.145,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-fixed-roller-journal-bush-0.26-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-fixed-plain-journal-bush",
        "actualBoreDiameterM": 0.012,
        "actualStaticBearingInterface": true
      },
      "gltfNode": 61
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer-0.26-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.26,
        0.128,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-reference-roller-stepped-journal-retainer-0.26-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-monolithic-inner-journal-sleeve-and-thrust-retainer",
        "actualStaticBearingInterface": true,
        "actualBoreDiameterM": 0.0096,
        "nominalRadialClearanceM": 0.0003,
        "nominalAxialEndplayM": 0.001,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 62
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-height-guide-base-foot--0.19",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.19,
        0.03,
        -0.18,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-height-guide-base-foot--0.19",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 63
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-full-height-head-guide--0.19",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.19,
        0.435,
        -0.18,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-full-height-head-guide--0.19",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 64
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-height-guide-base-foot-0.19",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.19,
        0.03,
        -0.18,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-height-guide-base-foot-0.19",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 65
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-full-height-head-guide-0.19",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.19,
        0.435,
        -0.18,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-full-height-head-guide-0.19",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 66
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-height-drive-top-reaction-crosshead",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.82,
        -0.18,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-height-drive-top-reaction-crosshead",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-plate",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualThroughHoles": 3,
        "actualWindows": 0,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 67
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-head-height-tubular-drive-case",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.65,
        -0.18,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-head-height-tubular-drive-case",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "bored-component",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualBoreDiameterM": 0.028
      },
      "gltfNode": 68
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-height-drive-top-positive-retainer",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.805,
        -0.18,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-height-drive-top-positive-retainer",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "bored-component",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualBoreDiameterM": 0.029
      },
      "gltfNode": 69
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-height-drive-lower-running-cap",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.494,
        -0.18,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-height-drive-lower-running-cap",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "bored-component",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualBoreDiameterM": 0.028
      },
      "gltfNode": 70
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "actual-one-constant-guided-induction-head"
      },
      "gltfNode": 71
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-head-height-guided-load-carriage",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.35,
        -0.18,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-head-height-guided-load-carriage",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-plate",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualThroughHoles": 3,
        "actualWindows": 0,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 72
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-head-height-real-running-guide-bush--0.19",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.19,
        0.35,
        -0.18,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-head-height-real-running-guide-bush--0.19",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "bored-component",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualBoreDiameterM": 0.015,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 73
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-head-height-real-running-guide-bush-0.19",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.19,
        0.35,
        -0.18,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-head-height-real-running-guide-bush-0.19",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "bored-component",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualBoreDiameterM": 0.015,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 74
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-height-drive-constant-forcer",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.58,
        -0.18,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-height-drive-constant-forcer",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1
      },
      "gltfNode": 75
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-height-drive-constant-output-rod",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.46,
        -0.18,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-height-drive-constant-output-rod",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1
      },
      "gltfNode": 76
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-head-positive-rear-load-arm--0.12",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.12,
        0.32,
        -0.14,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-head-positive-rear-load-arm--0.12",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 77
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-head-rear-carriage-load-riser--0.12",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.12,
        0.337,
        -0.17,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-head-rear-carriage-load-riser--0.12",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 78
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-head-positive-rear-load-arm-0.12",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.12,
        0.32,
        -0.14,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-head-positive-rear-load-arm-0.12",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 79
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-head-rear-carriage-load-riser-0.12",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.12,
        0.337,
        -0.17,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-head-rear-carriage-load-riser-0.12",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 80
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-induction-head-dielectric-bottom-window",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.265,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-induction-head-dielectric-bottom-window",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-plate",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualThroughHoles": 0,
        "actualWindows": 0,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 81
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-induction-head-dielectric-retention-top",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.34,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-induction-head-dielectric-retention-top",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-plate",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualThroughHoles": 0,
        "actualWindows": 0,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 82
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-head-side-housing--0.147",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.147,
        0.302,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-head-side-housing--0.147",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 83
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-head-side-housing-0.147",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.147,
        0.302,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-head-side-housing-0.147",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 84
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-head-front-housing-wall",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.302,
        0.097,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-head-front-housing-wall",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 85
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-head-real-two-terminal-bored-rear-wall",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.302,
        -0.097,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-head-real-two-terminal-bored-rear-wall",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-plate",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualThroughHoles": 2,
        "actualWindows": 0,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 86
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-constant-flat-induction-copper-winding",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-constant-flat-induction-copper-winding",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "actual-constant-copper-pancake-winding",
        "BOMqty": 1,
        "actualCopperWinding": true,
        "turns": 3.5,
        "fieldCurrentHeating": "NOT_SIMULATED"
      },
      "gltfNode": 87
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-winding-dielectric-rest-saddle-0",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.027902195621812644,
        0.2775,
        -0.004419273637386518,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-winding-dielectric-rest-saddle-0",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 88
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-winding-dielectric-rest-saddle-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.03987254195742949,
        0.2775,
        -0.020316074863344667,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-winding-dielectric-rest-saddle-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 89
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-winding-dielectric-rest-saddle-2",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.04331029034767602,
        0.2775,
        -0.04331029034767604,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-winding-dielectric-rest-saddle-2",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 90
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-retained-ferrite-reference-backing-bar--0.065",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.065,
        0.327,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-retained-ferrite-reference-backing-bar--0.065",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 91
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-retained-ferrite-reference-backing-bar--0.02",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.02,
        0.327,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-retained-ferrite-reference-backing-bar--0.02",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 92
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-retained-ferrite-reference-backing-bar-0.025",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.025,
        0.327,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-retained-ferrite-reference-backing-bar-0.025",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 93
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-retained-ferrite-reference-backing-bar-0.07",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.07,
        0.327,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-retained-ferrite-reference-backing-bar-0.07",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 94
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-fixed-winding-to-terminal-lead-0",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-fixed-winding-to-terminal-lead-0",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8"
      },
      "gltfNode": 95
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-coil-copper-terminal-0",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.02,
        0.305,
        -0.105,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-coil-copper-terminal-0",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "bored-component",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualBoreDiameterM": 0.004
      },
      "gltfNode": 96
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-terminal-positive-dielectric-retainer-0",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.02,
        0.305,
        -0.1,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-terminal-positive-dielectric-retainer-0",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "bored-component",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualBoreDiameterM": 0.008,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 97
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/t-eef7f408-bc0c-5e04-863d-31c441c380c8:coil_terminal_1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        -1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        -1,
        0,
        0.02,
        0.305,
        -0.11,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8:coil_terminal_1"
      },
      "gltfNode": 98
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-fixed-winding-to-terminal-lead-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-fixed-winding-to-terminal-lead-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8"
      },
      "gltfNode": 99
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-coil-copper-terminal-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.075,
        0.315,
        -0.105,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-coil-copper-terminal-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "bored-component",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualBoreDiameterM": 0.004
      },
      "gltfNode": 100
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-terminal-positive-dielectric-retainer-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.075,
        0.315,
        -0.1,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/actual-terminal-positive-dielectric-retainer-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "bored-component",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualBoreDiameterM": 0.008,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 101
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/t-eef7f408-bc0c-5e04-863d-31c441c380c8:coil_terminal_2",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        -1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        -1,
        0,
        -0.075,
        0.315,
        -0.11,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8:coil_terminal_2"
      },
      "gltfNode": 102
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head/t-eef7f408-bc0c-5e04-863d-31c441c380c8:head-window",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-one-constant-guided-induction-head",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        0.9999999999999998,
        0,
        0,
        -0.9999999999999998,
        2.220446049250313e-16,
        0,
        0,
        0.262,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8:head-window"
      },
      "gltfNode": 103
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-cabinet-load-foot--0.13",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.13,
        0.04,
        -0.29,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-cabinet-load-foot--0.13",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 104
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-cabinet-load-foot-0.13",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.13,
        0.04,
        -0.29,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-cabinet-load-foot-0.13",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 105
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-cabinet-sidewall--0.172",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.172,
        0.22,
        -0.29,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-cabinet-sidewall--0.172",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 106
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-cabinet-sidewall-0.172",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.172,
        0.22,
        -0.29,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-cabinet-sidewall-0.172",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 107
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-cabinet-backwall",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.22,
        -0.36,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-cabinet-backwall",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-plate",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualThroughHoles": 0,
        "actualWindows": 0,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 108
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-cabinet-top-bottom-0.063",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.063,
        -0.29,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-cabinet-top-bottom-0.063",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-plate",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualThroughHoles": 0,
        "actualWindows": 0,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 109
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-cabinet-top-bottom-0.377",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.377,
        -0.29,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-cabinet-top-bottom-0.377",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-plate",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualThroughHoles": 0,
        "actualWindows": 0,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 110
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-front-panel-real-knob-bore-and-vents",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.22,
        -0.22,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-front-panel-real-knob-bore-and-vents",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-plate",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualThroughHoles": 1,
        "actualWindows": 2,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 111
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-vent-retained-bar-0.12--0.08",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.08,
        0.12,
        -0.2185,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-vent-retained-bar-0.12--0.08",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 112
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-vent-retained-bar-0.12--0.04",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.04,
        0.12,
        -0.2185,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-vent-retained-bar-0.12--0.04",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 113
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-vent-retained-bar-0.12-0",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.12,
        -0.2185,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-vent-retained-bar-0.12-0",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 114
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-vent-retained-bar-0.12-0.04",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.04,
        0.12,
        -0.2185,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-vent-retained-bar-0.12-0.04",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 115
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-vent-retained-bar-0.12-0.08",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.08,
        0.12,
        -0.2185,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-vent-retained-bar-0.12-0.08",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 116
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-vent-retained-bar-0.32--0.08",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.08,
        0.32,
        -0.2185,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-vent-retained-bar-0.32--0.08",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 117
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-vent-retained-bar-0.32--0.04",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.04,
        0.32,
        -0.2185,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-vent-retained-bar-0.32--0.04",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 118
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-vent-retained-bar-0.32-0",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.32,
        -0.2185,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-vent-retained-bar-0.32-0",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 119
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-vent-retained-bar-0.32-0.04",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.04,
        0.32,
        -0.2185,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-vent-retained-bar-0.32-0.04",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 120
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-vent-retained-bar-0.32-0.08",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.08,
        0.32,
        -0.2185,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-vent-retained-bar-0.32-0.08",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 121
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-internal-electrical-load-platform",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.073,
        -0.29,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-internal-electrical-load-platform",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 122
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-transformer-core-upright--0.06",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.06,
        0.13,
        -0.29,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-transformer-core-upright--0.06",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 123
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-transformer-core-upright-0.06",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.06,
        0.13,
        -0.29,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-transformer-core-upright-0.06",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 124
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-transformer-core-yoke-0.085",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.085,
        -0.29,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-transformer-core-yoke-0.085",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 125
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-transformer-core-yoke-0.175",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.175,
        -0.29,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-transformer-core-yoke-0.175",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 126
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-transformer-dielectric-bobbin-base",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.06,
        0.095,
        -0.29,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-transformer-dielectric-bobbin-base",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "bored-component",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualBoreDiameterM": 0.029
      },
      "gltfNode": 127
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-real-copper-transformer-winding",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.06,
        0.13,
        -0.29,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-real-copper-transformer-winding",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "bored-component",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualBoreDiameterM": 0.03
      },
      "gltfNode": 128
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-fixed-capacitor-can--0.32",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.1,
        0.12,
        -0.32,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-fixed-capacitor-can--0.32",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1
      },
      "gltfNode": 129
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-fixed-capacitor-can--0.26",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.1,
        0.12,
        -0.26,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-fixed-capacitor-can--0.26",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1
      },
      "gltfNode": 130
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-manual-setting-potentiometer-stator",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.26,
        -0.232,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-manual-setting-potentiometer-stator",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "bored-component",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualBoreDiameterM": 0.012
      },
      "gltfNode": 131
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-dial-ring",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.26,
        -0.2155,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-dial-ring",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "bored-component",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualBoreDiameterM": 0.032
      },
      "gltfNode": 132
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-0",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.021,
        0.26,
        -0.2136,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-0",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 133
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9238795325112867,
        0.3826834323650897,
        0,
        0,
        -0.3826834323650897,
        0.9238795325112867,
        0,
        0,
        0,
        0,
        1,
        0,
        0.019401470182737024,
        0.2680363520796669,
        -0.2136,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 134
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-2",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.7071067811865475,
        0.7071067811865476,
        0,
        0,
        -0.7071067811865476,
        0.7071067811865475,
        0,
        0,
        0,
        0,
        1,
        0,
        0.0148492424049175,
        0.2748492424049175,
        -0.2136,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-2",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 135
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-3",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.38268343236508984,
        0.9238795325112866,
        0,
        0,
        -0.9238795325112866,
        0.38268343236508984,
        0,
        0,
        0,
        0,
        1,
        0,
        0.008036352079666888,
        0.27940147018273703,
        -0.2136,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-3",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 136
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-4",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        1.285879139104721e-18,
        0.281,
        -0.2136,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-4",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 137
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-5",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.3826834323650894,
        0.923879532511287,
        0,
        0,
        -0.923879532511287,
        -0.3826834323650894,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.00803635207966688,
        0.27940147018273703,
        -0.2136,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-5",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 138
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-6",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.7071067811865475,
        0.7071067811865477,
        0,
        0,
        -0.7071067811865477,
        -0.7071067811865475,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.014849242404917497,
        0.2748492424049175,
        -0.2136,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-6",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 139
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-7",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.9238795325112867,
        0.3826834323650899,
        0,
        0,
        -0.3826834323650899,
        -0.9238795325112867,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.019401470182737024,
        0.2680363520796669,
        -0.2136,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-7",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 140
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-8",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -1,
        1.2246467991473532e-16,
        0,
        0,
        -1.2246467991473532e-16,
        -1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.021,
        0.26,
        -0.2136,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-8",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 141
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-9",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.9238795325112867,
        -0.3826834323650896,
        0,
        0,
        0.3826834323650896,
        -0.9238795325112867,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.019401470182737024,
        0.2519636479203331,
        -0.2136,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-9",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 142
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-10",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.7071067811865479,
        -0.7071067811865471,
        0,
        0,
        0.7071067811865471,
        -0.7071067811865479,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.014849242404917506,
        0.2451507575950825,
        -0.2136,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-10",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 143
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-11",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.3826834323650894,
        -0.9238795325112867,
        0,
        0,
        0.9238795325112867,
        -0.3826834323650894,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.00803635207966688,
        0.24059852981726298,
        -0.2136,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-11",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 144
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-12",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        -2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.8576374173141625e-18,
        0.23900000000000002,
        -0.2136,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-mechanical-position-only-tick-12",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 145
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-manual-command-potentiometer-shaft",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.26,
        -0.195,
        1
      ],
      "sourceUserData": {
        "partId": "actual-generator-manual-command-potentiometer-shaft"
      },
      "gltfNode": 146
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-manual-command-potentiometer-shaft/actual-constant-potentiometer-shaft",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-manual-command-potentiometer-shaft",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        -0.02,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-manual-command-potentiometer-shaft/actual-constant-potentiometer-shaft",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1
      },
      "gltfNode": 147
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-manual-command-potentiometer-shaft/actual-manual-generator-setting-knob",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-manual-command-potentiometer-shaft",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-manual-command-potentiometer-shaft/actual-manual-generator-setting-knob",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "turned-component",
        "BOMqty": 1
      },
      "gltfNode": 148
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-manual-command-potentiometer-shaft/actual-knob-mechanical-position-pointer",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-manual-command-potentiometer-shaft",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.005,
        0,
        0.0095,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-manual-command-potentiometer-shaft/actual-knob-mechanical-position-pointer",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 149
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-manual-command-potentiometer-shaft/t-eef7f408-bc0c-5e04-863d-31c441c380c8:mechanical-command-pointer",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/actual-generator-manual-command-potentiometer-shaft",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.012,
        0,
        0.01,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8:mechanical-command-pointer"
      },
      "gltfNode": 150
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/t-eef7f408-bc0c-5e04-863d-31c441c380c8:mount",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        0.9999999999999998,
        0,
        0,
        -0.9999999999999998,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8:mount"
      },
      "gltfNode": 151
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/t-eef7f408-bc0c-5e04-863d-31c441c380c8:infeed",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        0.9999999999999998,
        0,
        0,
        1,
        0,
        0,
        -0.9999999999999998,
        0,
        2.220446049250313e-16,
        0,
        -0.35,
        0.15,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8:infeed"
      },
      "gltfNode": 152
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/t-eef7f408-bc0c-5e04-863d-31c441c380c8:outfeed",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        -0.9999999999999998,
        0,
        0,
        1,
        0,
        0,
        0.9999999999999998,
        0,
        2.220446049250313e-16,
        0,
        0.35,
        0.15,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8:outfeed"
      },
      "gltfNode": 153
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/t-eef7f408-bc0c-5e04-863d-31c441c380c8:work",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -0.9999999999999998,
        0,
        0,
        0.9999999999999998,
        2.220446049250313e-16,
        0,
        0,
        0.22,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8:work"
      },
      "gltfNode": 154
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.27,
        0.0206,
        0.28,
        1
      ],
      "sourceUserData": {
        "partId": "ds-badge",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 155
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "badge-orient",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 156
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient/badge-bezel",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient/badge-bezel",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 157
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient/badge-backing",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient/badge-backing",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 158
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient/badge-rivet-0",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.04505,
        -0.01005,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient/badge-rivet-0",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 159
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient/badge-rivet-1",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.04505,
        0.01005,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient/badge-rivet-1",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 160
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient/badge-rivet-2",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.04505,
        -0.01005,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient/badge-rivet-2",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 161
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient/badge-rivet-3",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.04505,
        0.01005,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient/badge-rivet-3",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 162
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient/badge-D",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.0174,
        0,
        0,
        0,
        0,
        0.0174,
        0,
        0,
        0,
        0,
        0.00054,
        0,
        -0.007656,
        0,
        0.0005189999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient/badge-D",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 163
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient/badge-S",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.0174,
        0,
        0,
        0,
        0,
        0.0174,
        0,
        0,
        0,
        0,
        0.00054,
        0,
        0.007656,
        0,
        0.0005189999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient/badge-S",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 164
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient/badge-D-back",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.0174,
        0,
        -2.1308854305163943e-18,
        0,
        0,
        0.0174,
        0,
        0,
        6.613092715395708e-20,
        0,
        -0.00054,
        0,
        0.007656,
        0,
        -0.0005189999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient/badge-D-back",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 165
    },
    {
      "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient/badge-S-back",
      "parent": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.0174,
        0,
        -2.1308854305163943e-18,
        0,
        0,
        0.0174,
        0,
        0,
        6.613092715395708e-20,
        0,
        -0.00054,
        0,
        -0.007656,
        0,
        -0.0005189999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8/t-eef7f408-bc0c-5e04-863d-31c441c380c8:base/ds-badge/badge-orient/badge-S-back",
        "assetId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 166
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "Own nominal architecture in metres/radians. No manufacturer CAD, ratings, physical or control certification."
    }
  ],
  "rights": {
    "id": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
    "assetTypeId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:fa7bfa78396021f5cb98afdeeea974ae6aad6164b94b0b9b21a1afee1a41c1b5",
    "modelSource": "kit/models/t-eef7f408-bc0c-5e04-863d-31c441c380c8.mjs",
    "dslExampleSource": "dsl/models/t-eef7f408-bc0c-5e04-863d-31c441c380c8.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/t-eef7f408-bc0c-5e04-863d-31c441c380c8.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/t-eef7f408-bc0c-5e04-863d-31c441c380c8.txt",
      "sha256": "sha256:f7daa06e87458b2909221b1f9581c8643085ed0cc30b5e4284e050b271a03fd5",
      "bytes": 820
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/t-eef7f408-bc0c-5e04-863d-31c441c380c8/model.glb",
      "bytes": 3561528,
      "sha256": "sha256:3142585d4c6b7e3ba49363c69c9d81c73223eb892bcab1df942b1d65c9c8dc91"
    },
    "licenses": [
      {
        "path": "open-assets/t-eef7f408-bc0c-5e04-863d-31c441c380c8/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/t-eef7f408-bc0c-5e04-863d-31c441c380c8/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/t-eef7f408-bc0c-5e04-863d-31c441c380c8/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/t-eef7f408-bc0c-5e04-863d-31c441c380c8/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/t-eef7f408-bc0c-5e04-863d-31c441c380c8/LICENSES/ASSET-NOTICES/t-eef7f408-bc0c-5e04-863d-31c441c380c8.txt",
        "bytes": 820,
        "sha256": "sha256:f7daa06e87458b2909221b1f9581c8643085ed0cc30b5e4284e050b271a03fd5"
      }
    ],
    "source": {
      "path": "kit/models/t-eef7f408-bc0c-5e04-863d-31c441c380c8.mjs",
      "bytes": 27138,
      "sha256": "sha256:fa7bfa78396021f5cb98afdeeea974ae6aad6164b94b0b9b21a1afee1a41c1b5"
    },
    "ds2": {
      "path": "dsl/models/t-eef7f408-bc0c-5e04-863d-31c441c380c8.ds2",
      "bytes": 2756,
      "sha256": "sha256:efa1a4bc6f598aefdb491584776462346adc3c57ad24662de1411cc488f69ac2",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 167,
    "triangles": 42556,
    "maxMatrixError": 4.440892098500626e-16,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 10,
    "nodeComparisons": 1670,
    "semanticFrameComparisons": 90,
    "acceptanceCases": 3,
    "acceptanceFrameComparisons": 24,
    "maxMotionMatrixError": 4.440892098500626e-16
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "t-eef7f408-bc0c-5e04-863d-31c441c380c8",
    "kind": "equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "packaging-dosing/closure-sealing",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": false,
    "parameters": [
      {
        "id": "head_width",
        "type": "number",
        "unit": "m",
        "min": 0.28,
        "max": 0.32,
        "default": 0.3
      }
    ],
    "ports": {
      "mount": {
        "frameId": "mount",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0.7071067811865475,
            0,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "infeed": {
        "frameId": "infeed",
        "portClass": "material-flow",
        "direction": "input",
        "quaternion": [
          0,
          1,
          0,
          0
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -0.35,
            0.15,
            0
          ],
          "quaternion": [
            0,
            0.7071067811865476,
            0,
            0.7071067811865475
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "outfeed": {
        "frameId": "outfeed",
        "portClass": "material-flow",
        "direction": "output",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.35,
            0.15,
            0
          ],
          "quaternion": [
            0,
            0.7071067811865475,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "work": {
        "frameId": "work",
        "portClass": "process",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0.22,
            0
          ],
          "quaternion": [
            -0.7071067811865475,
            0,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "command": {
        "frameId": "mechanical-command-pointer",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.012,
            0.26,
            -0.185
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "head": {
        "frameId": "head-window",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0.262,
            0
          ],
          "quaternion": [
            0.7071067811865475,
            0,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "coil_terminal_1": {
        "frameId": "coil_terminal_1",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.02,
            0.305,
            -0.11
          ],
          "quaternion": [
            0,
            1,
            0,
            0
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "coil_terminal_2": {
        "frameId": "coil_terminal_2",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -0.075,
            0.315,
            -0.11
          ],
          "quaternion": [
            0,
            1,
            0,
            0
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
