{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "t-d966dffd-0054-541f-b4d3-05d95627600f",
  "assetTypeId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
  "label": "로드센싱 우선 유량 분배기",
  "category": "fluid-control / flow-routing",
  "description": "부하 신호 포트와 우선 및 잉여 유량 출구를 구분",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -0.1599999964237213,
      -5.2154064053566707e-11,
      -0.11999999731779099
    ],
    "max": [
      0.1599999964237213,
      0.11099999845027923,
      0.12445215999999999
    ]
  },
  "size": [
    0.3199999928474426,
    0.11099999850243329,
    0.24445215731779096
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 0,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 0,
      "blindSocketHeads": 0,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 10,
    "warnings": [
      "NO_APPLICABLE_MANUFACTURING_PRIMITIVE_REQUIRES_MODEL_SPECIFIC_REVIEW"
    ],
    "changedMeshes": 0,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 12928,
      "afterTriangles": 12928,
      "reachedTarget": true,
      "changedMeshes": 0,
      "changes": [],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/t-d966dffd-0054-541f-b4d3-05d95627600f.mjs",
    "sourceSha256": "sha256:96f7955cdb24493bbd8e094f273f28d7c1512425b2c64041d6fcc3b5d9e6d0fd",
    "deliverySha256": "sha256:96f7955cdb24493bbd8e094f273f28d7c1512425b2c64041d6fcc3b5d9e6d0fd",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:9d59744a8ae5a3b0a497d80f8dc1c222a15a63806a3c16fd95156925de73a68a",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:9d59744a8ae5a3b0a497d80f8dc1c222a15a63806a3c16fd95156925de73a68a",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [
    {
      "id": "metering_land_width",
      "type": "number",
      "unit": "m",
      "min": 0.014,
      "max": 0.018,
      "default": 0.016
    }
  ],
  "parameterValues": {
    "metering_land_width": 0.016
  },
  "joints": [
    {
      "id": "priority_spool",
      "label": "priority_spool",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "min": 0,
      "max": 0.006,
      "initial": 0,
      "unit": "m"
    }
  ],
  "initialState": {
    "priority_spool": 0
  },
  "bindings": [
    {
      "id": "priority_spool",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0.075,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool",
      "gltfNode": 45
    }
  ],
  "jointBindings": [
    {
      "id": "priority_spool",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0.075,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool",
      "gltfNode": 45
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "nodeName": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "mount": {
      "id": "mount",
      "node": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:mount",
      "nodeName": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:mount",
      "gltfNode": 2,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0.7071067811865475,
        0,
        0,
        0.7071067811865476
      ]
    },
    "priority-metering-edge": {
      "id": "priority-metering-edge",
      "node": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/t-d966dffd-0054-541f-b4d3-05d95627600f:priority-metering-edge",
      "nodeName": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/t-d966dffd-0054-541f-b4d3-05d95627600f:priority-metering-edge",
      "gltfNode": 53,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.026,
        0.075,
        0,
        1
      ],
      "position": [
        -0.026,
        0.075,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "excess-metering-edge": {
      "id": "excess-metering-edge",
      "node": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/t-d966dffd-0054-541f-b4d3-05d95627600f:excess-metering-edge",
      "nodeName": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/t-d966dffd-0054-541f-b4d3-05d95627600f:excess-metering-edge",
      "gltfNode": 54,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.026,
        0.075,
        0,
        1
      ],
      "position": [
        0.026,
        0.075,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "spool-position": {
      "id": "spool-position",
      "node": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/t-d966dffd-0054-541f-b4d3-05d95627600f:spool-position",
      "nodeName": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/t-d966dffd-0054-541f-b4d3-05d95627600f:spool-position",
      "gltfNode": 55,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.1515,
        0.075,
        0,
        1
      ],
      "position": [
        0.1515,
        0.075,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "inlet": {
      "id": "inlet",
      "node": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:inlet",
      "nodeName": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:inlet",
      "gltfNode": 56,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.075,
        0.07,
        1
      ],
      "position": [
        0,
        0.075,
        0.07
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "priority-outlet": {
      "id": "priority-outlet",
      "node": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:priority-outlet",
      "nodeName": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:priority-outlet",
      "gltfNode": 57,
      "matrix": [
        -1,
        0,
        -1.2246467991473532e-16,
        0,
        0,
        1,
        0,
        0,
        1.2246467991473532e-16,
        0,
        -1,
        0,
        -0.025,
        0.075,
        -0.07,
        1
      ],
      "position": [
        -0.025,
        0.075,
        -0.07
      ],
      "quaternion": [
        0,
        1,
        0,
        6.123233995736766e-17
      ]
    },
    "excess-outlet": {
      "id": "excess-outlet",
      "node": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:excess-outlet",
      "nodeName": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:excess-outlet",
      "gltfNode": 58,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.025,
        0.075,
        0.07,
        1
      ],
      "position": [
        0.025,
        0.075,
        0.07
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "load-sense": {
      "id": "load-sense",
      "node": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:load-sense",
      "nodeName": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:load-sense",
      "gltfNode": 59,
      "matrix": [
        2.220446049250313e-16,
        0,
        1,
        0,
        0,
        1,
        0,
        0,
        -1,
        0,
        2.220446049250313e-16,
        0,
        -0.131,
        0.08499999999999999,
        0,
        1
      ],
      "position": [
        -0.131,
        0.08499999999999999,
        0
      ],
      "quaternion": [
        0,
        -0.7071067811865475,
        0,
        0.7071067811865476
      ]
    },
    "bleed-service": {
      "id": "bleed-service",
      "node": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:bleed-service",
      "nodeName": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:bleed-service",
      "gltfNode": 60,
      "matrix": [
        2.220446049250313e-16,
        0,
        -1,
        0,
        0,
        1,
        0,
        0,
        1,
        0,
        2.220446049250313e-16,
        0,
        0.131,
        0.08499999999999999,
        0,
        1
      ],
      "position": [
        0.131,
        0.08499999999999999,
        0
      ],
      "quaternion": [
        0,
        0.7071067811865475,
        0,
        0.7071067811865476
      ]
    }
  },
  "ports": {
    "mount": "mount",
    "inlet": "inlet",
    "outlet": "priority-outlet",
    "excess": "excess-outlet",
    "supply": "load-sense",
    "service": "bleed-service"
  },
  "nodes": [
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 0,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 0,
            "blindSocketHeads": 0,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 10,
          "warnings": [
            "NO_APPLICABLE_MANUFACTURING_PRIMITIVE_REQUIRES_MODEL_SPECIFIC_REVIEW"
          ],
          "changedMeshes": 0,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 12928,
            "afterTriangles": 12928,
            "reachedTarget": true,
            "changedMeshes": 0,
            "changes": [],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "t-d966dffd-0054-541f-b4d3-05d95627600f",
          "label": "로드센싱 우선 유량 분배기",
          "category": "fluid-control / flow-routing",
          "summary": "부하 신호 포트와 우선 및 잉여 유량 출구를 구분",
          "coordinate_profile": "lib3d-world/1",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [
            {
              "id": "metering_land_width",
              "type": "number",
              "unit": "m",
              "min": 0.014,
              "max": 0.018,
              "default": 0.016
            }
          ],
          "joints": [
            {
              "id": "priority_spool",
              "label": "priority_spool",
              "kind": "prismatic",
              "axis": [
                1,
                0,
                0
              ],
              "min": 0,
              "max": 0.006,
              "initial": 0,
              "unit": "m"
            }
          ],
          "ports": {
            "mount": "mount",
            "inlet": "inlet",
            "outlet": "priority-outlet",
            "excess": "excess-outlet",
            "supply": "load-sense",
            "service": "bleed-service"
          },
          "interfaceProfiles": [
            {
              "port": "mount",
              "frame": "mount",
              "portClass": "mechanical-mount",
              "direction": "mount",
              "ratings": null
            },
            {
              "port": "inlet",
              "frame": "inlet",
              "portClass": "process-media",
              "direction": "input",
              "ratings": null
            },
            {
              "port": "outlet",
              "frame": "priority-outlet",
              "portClass": "process-media",
              "direction": "output",
              "ratings": null
            },
            {
              "port": "service",
              "frame": "bleed-service",
              "portClass": "service-media",
              "direction": "bidirectional",
              "ratings": null
            },
            {
              "port": "supply",
              "frame": "load-sense",
              "portClass": "hydraulic-fluid",
              "direction": "input",
              "ratings": null
            },
            {
              "port": "excess",
              "frame": "excess-outlet",
              "portClass": "process-media",
              "direction": "output",
              "ratings": null
            }
          ],
          "required_host_features": [
            "prismatic"
          ],
          "conservative_bounds_m": {
            "min": [
              -1.2,
              0,
              -1
            ],
            "max": [
              1.2,
              1.8,
              1
            ]
          },
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "Independent own nominal architecture and dimensions; no manufacturer CAD, calibrated values, ratings or physical certification"
            }
          ],
          "known_limitations": [
            "Actual single two-land spool and equal-area rigid pilot pistons separate P inlet, priority flow, excess flow, load-sensing pilot chamber and independent bleed/service chamber. Load-sense supply is an externally supplied hydraulic signal, not a measured pressure or automatic compensating solver. Finite6mm commanded stroke and actual stem witness expose changing physical metering-edge coordinates only; no divided flow, priority guarantee, hydraulic force equilibrium, spring response, sealing, pressure rating or load-sense stability is generated. External hydraulic circuit/pressures and physical operation remain NOT_RUN."
          ],
          "physicalExecution": "NOT_RUN",
          "readiness": {
            "display": "DISPLAY_PREVIEW",
            "core_verified": false,
            "physical_execution_eligible": false
          },
          "expansionCandidate": {
            "sourceCandidateId": "load-sensing-priority-divider",
            "candidateId": "fluid-control.load-sensing-priority-divider",
            "stableKey": "lib3d:type:v1:fluid-control/flow-routing/load-sensing-priority-divider",
            "typeUid": "urn:uuid:d966dffd-0054-541f-b4d3-05d95627600f",
            "deliveryAssetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
            "publicationStatus": "UNPUBLISHED_RELEASE_CANDIDATE"
          },
          "installation": {
            "mode": "MOUNTED_COMPONENT",
            "datumFrame": "mount",
            "floorPolicy": "NOT_APPLICABLE_WITHOUT_EXTERNAL_INSTALLATION",
            "basis": "Own nominal standalone mechanism with a real bottom mount; external installation and world-floor review remain NOT_RUN"
          },
          "sourcePreviewTrajectory": {
            "schema": "lib3d-source-preview-trajectory/1",
            "durationMs": 3000,
            "keyframes": [
              {
                "timeMs": 0,
                "state": {
                  "priority_spool": 0
                }
              },
              {
                "timeMs": 1000,
                "state": {
                  "priority_spool": 0.006
                }
              },
              {
                "timeMs": 2000,
                "state": {
                  "priority_spool": 0.003
                }
              },
              {
                "timeMs": 3000,
                "state": {
                  "priority_spool": 0
                }
              }
            ],
            "scope": "DISPLAY_PREVIEW",
            "physicalExecution": "NOT_RUN",
            "ioPolicy": "NO_IO_OR_WORK_COMPLETION"
          },
          "supply_interfaces": [
            {
              "port": "supply",
              "frame": "load-sense",
              "medium": "HYDRAULIC_FLUID",
              "direction": "IN",
              "pressure": null,
              "flow": null,
              "flow_state": "NOT_SIMULATED"
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {
          "metering_land_width": 0.016
        },
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
          "mount": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:mount",
          "priority-metering-edge": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/t-d966dffd-0054-541f-b4d3-05d95627600f:priority-metering-edge",
          "excess-metering-edge": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/t-d966dffd-0054-541f-b4d3-05d95627600f:excess-metering-edge",
          "spool-position": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/t-d966dffd-0054-541f-b4d3-05d95627600f:spool-position",
          "inlet": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:inlet",
          "priority-outlet": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:priority-outlet",
          "excess-outlet": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:excess-outlet",
          "load-sense": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:load-sense",
          "bleed-service": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:bleed-service"
        },
        "jointBindings": [
          {
            "id": "priority_spool",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              0,
              0.075,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool"
          }
        ],
        "joints": [
          {
            "id": "priority_spool",
            "label": "priority_spool",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "min": 0,
            "max": 0.006,
            "initial": 0,
            "unit": "m",
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 4,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 47
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "Independent own nominal architecture and dimensions; no manufacturer CAD, calibrated values, ratings or physical certification"
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "priority_spool": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f:base",
        "scope": "DISPLAY_PREVIEW",
        "physicalExecution": "NOT_RUN",
        "core_verified": false,
        "physical_execution_eligible": false,
        "publicationStatus": "UNPUBLISHED_RELEASE_CANDIDATE"
      },
      "gltfNode": 1
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:mount",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f:mount"
      },
      "gltfNode": 2
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/mounting-flange",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.006,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/mounting-flange",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1
      },
      "gltfNode": 3
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/mount-fastener--0.11199999999999999--0.0792-washer",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.11199999999999999,
        0.0127,
        -0.0792,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/mount-fastener--0.11199999999999999--0.0792-washer",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.0028,
        "boreAxis": "y"
      },
      "gltfNode": 4
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/mount-fastener--0.11199999999999999--0.0792-socket-head",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.11199999999999999,
        0.015099999999999999,
        -0.0792,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/mount-fastener--0.11199999999999999--0.0792-socket-head",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "constant-length-rigid-shaft",
        "BOMqty": 1
      },
      "gltfNode": 5
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/mount-fastener--0.11199999999999999-0.0792-washer",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.11199999999999999,
        0.0127,
        0.0792,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/mount-fastener--0.11199999999999999-0.0792-washer",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.0028,
        "boreAxis": "y"
      },
      "gltfNode": 6
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/mount-fastener--0.11199999999999999-0.0792-socket-head",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.11199999999999999,
        0.015099999999999999,
        0.0792,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/mount-fastener--0.11199999999999999-0.0792-socket-head",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "constant-length-rigid-shaft",
        "BOMqty": 1
      },
      "gltfNode": 7
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/mount-fastener-0.11199999999999999--0.0792-washer",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.11199999999999999,
        0.0127,
        -0.0792,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/mount-fastener-0.11199999999999999--0.0792-washer",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.0028,
        "boreAxis": "y"
      },
      "gltfNode": 8
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/mount-fastener-0.11199999999999999--0.0792-socket-head",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.11199999999999999,
        0.015099999999999999,
        -0.0792,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/mount-fastener-0.11199999999999999--0.0792-socket-head",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "constant-length-rigid-shaft",
        "BOMqty": 1
      },
      "gltfNode": 9
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/mount-fastener-0.11199999999999999-0.0792-washer",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.11199999999999999,
        0.0127,
        0.0792,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/mount-fastener-0.11199999999999999-0.0792-washer",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.0028,
        "boreAxis": "y"
      },
      "gltfNode": 10
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/mount-fastener-0.11199999999999999-0.0792-socket-head",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.11199999999999999,
        0.015099999999999999,
        0.0792,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/mount-fastener-0.11199999999999999-0.0792-socket-head",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "constant-length-rigid-shaft",
        "BOMqty": 1
      },
      "gltfNode": 11
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-left-compensator-to-priority-band-0",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-left-compensator-to-priority-band-0",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "actual-bored-priority-flow-body",
        "BOMqty": 1
      },
      "gltfNode": 12
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-open-priority-outlet-band-0",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-open-priority-outlet-band-0",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "actual-bored-priority-flow-body",
        "BOMqty": 1
      },
      "gltfNode": 13
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-priority-to-P-separator-0",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-priority-to-P-separator-0",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "actual-bored-priority-flow-body",
        "BOMqty": 1
      },
      "gltfNode": 14
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-open-P-inlet-band-0",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-open-P-inlet-band-0",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "actual-bored-priority-flow-body",
        "BOMqty": 1
      },
      "gltfNode": 15
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-P-to-excess-separator-0",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-P-to-excess-separator-0",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "actual-bored-priority-flow-body",
        "BOMqty": 1
      },
      "gltfNode": 16
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-open-excess-outlet-band-0",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-open-excess-outlet-band-0",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "actual-bored-priority-flow-body",
        "BOMqty": 1
      },
      "gltfNode": 17
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-right-compensator-to-excess-band-0",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-right-compensator-to-excess-band-0",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "actual-bored-priority-flow-body",
        "BOMqty": 1
      },
      "gltfNode": 18
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-load-sense-compensator-chamber--0.085",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.085,
        0.075,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-load-sense-compensator-chamber--0.085",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.0205,
        "boreAxis": "x"
      },
      "gltfNode": 19
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-load-sense-compensator-chamber-0.085",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.085,
        0.075,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-load-sense-compensator-chamber-0.085",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.0205,
        "boreAxis": "x"
      },
      "gltfNode": 20
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-priority-divider-ground-saddle--0.052",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.052,
        0.033,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-priority-divider-ground-saddle--0.052",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "rigid-machined-structure",
        "BOMqty": 1
      },
      "gltfNode": 21
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-priority-divider-ground-saddle-0.052",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.052,
        0.033,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-priority-divider-ground-saddle-0.052",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "rigid-machined-structure",
        "BOMqty": 1
      },
      "gltfNode": 22
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-bored-compensator-end-cap--1",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.107,
        0.075,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-bored-compensator-end-cap--1",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1
      },
      "gltfNode": 23
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-open-load-sensing-pilot-port",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.119,
        0.08499999999999999,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-open-load-sensing-pilot-port",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.0025,
        "boreAxis": "x"
      },
      "gltfNode": 24
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-end-cap-tie-nut--1--0.026--0.026",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.114,
        0.049,
        -0.026,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-end-cap-tie-nut--1--0.026--0.026",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.0023,
        "boreAxis": "x"
      },
      "gltfNode": 25
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-end-cap-tie-nut--1--0.026-0.026",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.114,
        0.049,
        0.026,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-end-cap-tie-nut--1--0.026-0.026",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.0023,
        "boreAxis": "x"
      },
      "gltfNode": 26
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-end-cap-tie-nut--1-0.026--0.026",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.114,
        0.10099999999999999,
        -0.026,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-end-cap-tie-nut--1-0.026--0.026",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.0023,
        "boreAxis": "x"
      },
      "gltfNode": 27
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-end-cap-tie-nut--1-0.026-0.026",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.114,
        0.10099999999999999,
        0.026,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-end-cap-tie-nut--1-0.026-0.026",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.0023,
        "boreAxis": "x"
      },
      "gltfNode": 28
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-bored-compensator-end-cap-1",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.107,
        0.075,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-bored-compensator-end-cap-1",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1
      },
      "gltfNode": 29
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-open-pilot-bleed-service-port",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.119,
        0.08499999999999999,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-open-pilot-bleed-service-port",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.0025,
        "boreAxis": "x"
      },
      "gltfNode": 30
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-end-cap-tie-nut-1--0.026--0.026",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.114,
        0.049,
        -0.026,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-end-cap-tie-nut-1--0.026--0.026",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.0023,
        "boreAxis": "x"
      },
      "gltfNode": 31
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-end-cap-tie-nut-1--0.026-0.026",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.114,
        0.049,
        0.026,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-end-cap-tie-nut-1--0.026-0.026",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.0023,
        "boreAxis": "x"
      },
      "gltfNode": 32
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-end-cap-tie-nut-1-0.026--0.026",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.114,
        0.10099999999999999,
        -0.026,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-end-cap-tie-nut-1-0.026--0.026",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.0023,
        "boreAxis": "x"
      },
      "gltfNode": 33
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-end-cap-tie-nut-1-0.026-0.026",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.114,
        0.10099999999999999,
        0.026,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-end-cap-tie-nut-1-0.026-0.026",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.0023,
        "boreAxis": "x"
      },
      "gltfNode": 34
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/constant-compensator-case-tie-rod--0.026--0.026",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.049,
        -0.026,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/constant-compensator-case-tie-rod--0.026--0.026",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "constant-length-rigid-shaft",
        "BOMqty": 1
      },
      "gltfNode": 35
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/constant-compensator-case-tie-rod--0.026-0.026",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.049,
        0.026,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/constant-compensator-case-tie-rod--0.026-0.026",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "constant-length-rigid-shaft",
        "BOMqty": 1
      },
      "gltfNode": 36
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/constant-compensator-case-tie-rod-0.026--0.026",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.10099999999999999,
        -0.026,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/constant-compensator-case-tie-rod-0.026--0.026",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "constant-length-rigid-shaft",
        "BOMqty": 1
      },
      "gltfNode": 37
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/constant-compensator-case-tie-rod-0.026-0.026",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.10099999999999999,
        0.026,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/constant-compensator-case-tie-rod-0.026-0.026",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "constant-length-rigid-shaft",
        "BOMqty": 1
      },
      "gltfNode": 38
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-cross-bored-P-port-bridge",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.075,
        0.025,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-cross-bored-P-port-bridge",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1
      },
      "gltfNode": 39
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-open-P-flow-port",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.075,
        0.051,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-open-P-flow-port",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.0035,
        "boreAxis": "z"
      },
      "gltfNode": 40
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-cross-bored-priority-port-bridge",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.025,
        0.075,
        -0.025,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-cross-bored-priority-port-bridge",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1
      },
      "gltfNode": 41
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-open-priority-flow-port",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.025,
        0.075,
        -0.051,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-open-priority-flow-port",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.004,
        "boreAxis": "z"
      },
      "gltfNode": 42
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-cross-bored-excess-port-bridge",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.025,
        0.075,
        0.025,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-cross-bored-excess-port-bridge",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1
      },
      "gltfNode": 43
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-open-excess-flow-port",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.025,
        0.075,
        0.051,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/actual-open-excess-flow-port",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.0035,
        "boreAxis": "z"
      },
      "gltfNode": 44
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.075,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "independent-two-land-priority-compensator-spool"
      },
      "gltfNode": 45
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/constant-priority-spool-and-witness-stem",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.0275,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/constant-priority-spool-and-witness-stem",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "constant-length-rigid-shaft",
        "BOMqty": 1
      },
      "gltfNode": 46
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/actual-opposed-flow-metering-land--0.018",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.018,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/actual-opposed-flow-metering-land--0.018",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.0038,
        "boreAxis": "x"
      },
      "gltfNode": 47
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/actual-opposed-flow-metering-land-0.018",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.018,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/actual-opposed-flow-metering-land-0.018",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.0038,
        "boreAxis": "x"
      },
      "gltfNode": 48
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/actual-equal-area-load-sensing-pilot-piston--0.085",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.085,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/actual-equal-area-load-sensing-pilot-piston--0.085",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.0038,
        "boreAxis": "x"
      },
      "gltfNode": 49
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/actual-equal-area-load-sensing-pilot-piston-0.085",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.085,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/actual-equal-area-load-sensing-pilot-piston-0.085",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "machined-actual-through-aperture",
        "BOMqty": 1,
        "boreRadiusM": 0.0038,
        "boreAxis": "x"
      },
      "gltfNode": 50
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/actual-exposed-priority-spool-witness",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.15,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/actual-exposed-priority-spool-witness",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "constant-length-rigid-shaft",
        "BOMqty": 1
      },
      "gltfNode": 51
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/actual-priority-witness-position-key",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.15,
        0.005,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/actual-priority-witness-position-key",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "rigid-machined-structure",
        "BOMqty": 1
      },
      "gltfNode": 52
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/t-d966dffd-0054-541f-b4d3-05d95627600f:priority-metering-edge",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.026,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f:priority-metering-edge"
      },
      "gltfNode": 53
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/t-d966dffd-0054-541f-b4d3-05d95627600f:excess-metering-edge",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.026,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f:excess-metering-edge"
      },
      "gltfNode": 54
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool/t-d966dffd-0054-541f-b4d3-05d95627600f:spool-position",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/independent-two-land-priority-compensator-spool",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.1515,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f:spool-position"
      },
      "gltfNode": 55
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:inlet",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.075,
        0.07,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f:inlet"
      },
      "gltfNode": 56
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:priority-outlet",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        -1,
        0,
        -1.2246467991473532e-16,
        0,
        0,
        1,
        0,
        0,
        1.2246467991473532e-16,
        0,
        -1,
        0,
        -0.025,
        0.075,
        -0.07,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f:priority-outlet"
      },
      "gltfNode": 57
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:excess-outlet",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.025,
        0.075,
        0.07,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f:excess-outlet"
      },
      "gltfNode": 58
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:load-sense",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        1,
        0,
        0,
        1,
        0,
        0,
        -1,
        0,
        2.220446049250313e-16,
        0,
        -0.131,
        0.08499999999999999,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f:load-sense"
      },
      "gltfNode": 59
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/t-d966dffd-0054-541f-b4d3-05d95627600f:bleed-service",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        -1,
        0,
        0,
        1,
        0,
        0,
        1,
        0,
        2.220446049250313e-16,
        0,
        0.131,
        0.08499999999999999,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f:bleed-service"
      },
      "gltfNode": 60
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.006,
        0.1219,
        1
      ],
      "sourceUserData": {
        "partId": "DS",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 61
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS/badge-bezel",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS/badge-bezel",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 62
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS/badge-backing",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS/badge-backing",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 63
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS/badge-rivet-0",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.028679999999999997,
        -0.00268,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS/badge-rivet-0",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 64
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS/badge-rivet-1",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.028679999999999997,
        0.00268,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS/badge-rivet-1",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 65
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS/badge-rivet-2",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.028679999999999997,
        -0.00268,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS/badge-rivet-2",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 66
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS/badge-rivet-3",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.028679999999999997,
        0.00268,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS/badge-rivet-3",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 67
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS/badge-D",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.00464,
        0,
        0,
        0,
        0,
        0.00464,
        0,
        0,
        0,
        0,
        0.0006496000000000001,
        0,
        -0.0020416,
        0,
        0.00190256,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS/badge-D",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 68
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS/badge-S",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.00464,
        0,
        0,
        0,
        0,
        0.00464,
        0,
        0,
        0,
        0,
        0.0006496000000000001,
        0,
        0.0020416,
        0,
        0.00190256,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS/badge-S",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 69
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS/badge-D-back",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.00464,
        0,
        -5.682361148043719e-19,
        0,
        0,
        0.00464,
        0,
        0,
        7.955305607261208e-20,
        0,
        -0.0006496000000000001,
        0,
        0.0020416,
        0,
        -0.00190256,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS/badge-D-back",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 70
    },
    {
      "id": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS/badge-S-back",
      "parent": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.00464,
        0,
        -5.682361148043719e-19,
        0,
        0,
        0.00464,
        0,
        0,
        7.955305607261208e-20,
        0,
        -0.0006496000000000001,
        0,
        -0.0020416,
        0,
        -0.00190256,
        1
      ],
      "sourceUserData": {
        "partId": "t-d966dffd-0054-541f-b4d3-05d95627600f/t-d966dffd-0054-541f-b4d3-05d95627600f:base/DS/badge-S-back",
        "assetId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 71
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "Independent own nominal architecture and dimensions; no manufacturer CAD, calibrated values, ratings or physical certification"
    }
  ],
  "rights": {
    "id": "t-d966dffd-0054-541f-b4d3-05d95627600f",
    "assetTypeId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:96f7955cdb24493bbd8e094f273f28d7c1512425b2c64041d6fcc3b5d9e6d0fd",
    "modelSource": "kit/models/t-d966dffd-0054-541f-b4d3-05d95627600f.mjs",
    "dslExampleSource": "dsl/models/t-d966dffd-0054-541f-b4d3-05d95627600f.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/t-d966dffd-0054-541f-b4d3-05d95627600f.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/t-d966dffd-0054-541f-b4d3-05d95627600f.txt",
      "sha256": "sha256:2bb9354416b27264b645882c72312ff3d46b6fc5dc7e870aee52997b34fe1275",
      "bytes": 820
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/t-d966dffd-0054-541f-b4d3-05d95627600f/model.glb",
      "bytes": 1176076,
      "sha256": "sha256:6ef72247066ade53e6737f2cda79b080af4fb7d1856467a2a9f1bf1963ed34e2"
    },
    "licenses": [
      {
        "path": "open-assets/t-d966dffd-0054-541f-b4d3-05d95627600f/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/t-d966dffd-0054-541f-b4d3-05d95627600f/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/t-d966dffd-0054-541f-b4d3-05d95627600f/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/t-d966dffd-0054-541f-b4d3-05d95627600f/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/t-d966dffd-0054-541f-b4d3-05d95627600f/LICENSES/ASSET-NOTICES/t-d966dffd-0054-541f-b4d3-05d95627600f.txt",
        "bytes": 820,
        "sha256": "sha256:2bb9354416b27264b645882c72312ff3d46b6fc5dc7e870aee52997b34fe1275"
      }
    ],
    "source": {
      "path": "kit/models/t-d966dffd-0054-541f-b4d3-05d95627600f.mjs",
      "bytes": 15673,
      "sha256": "sha256:96f7955cdb24493bbd8e094f273f28d7c1512425b2c64041d6fcc3b5d9e6d0fd"
    },
    "ds2": {
      "path": "dsl/models/t-d966dffd-0054-541f-b4d3-05d95627600f.ds2",
      "bytes": 1872,
      "sha256": "sha256:acd3904b66d11cf5ba1645647dceba613315456406e856ecd6fcc0f683d390f8",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 72,
    "triangles": 12928,
    "maxMatrixError": 9.62964972193618e-35,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 8,
    "nodeComparisons": 576,
    "semanticFrameComparisons": 80,
    "acceptanceCases": 3,
    "acceptanceFrameComparisons": 24,
    "maxMotionMatrixError": 9.62964972193618e-35
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "t-d966dffd-0054-541f-b4d3-05d95627600f",
    "kind": "equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "fluid-control / flow-routing",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": false,
    "parameters": [
      {
        "id": "metering_land_width",
        "type": "number",
        "unit": "m",
        "min": 0.014,
        "max": 0.018,
        "default": 0.016
      }
    ],
    "ports": {
      "mount": {
        "frameId": "mount",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0.7071067811865475,
            0,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "inlet": {
        "frameId": "inlet",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0.075,
            0.07
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "outlet": {
        "frameId": "priority-outlet",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -0.025,
            0.075,
            -0.07
          ],
          "quaternion": [
            0,
            1,
            0,
            6.123233995736766e-17
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "excess": {
        "frameId": "excess-outlet",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.025,
            0.075,
            0.07
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "supply": {
        "frameId": "load-sense",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -0.131,
            0.08499999999999999,
            0
          ],
          "quaternion": [
            0,
            -0.7071067811865475,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "service": {
        "frameId": "bleed-service",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.131,
            0.08499999999999999,
            0
          ],
          "quaternion": [
            0,
            0.7071067811865475,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
