{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
  "assetTypeId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
  "label": "팔레트 하부 검사 경동대",
  "category": "intralogistics-storage / inspection-handling",
  "description": "비어 있는 운반 팔레트를 수직 구속하여 하부 구조 노출",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -0.675000011920929,
      -1.862645142292063e-10,
      -0.8999999761581421
    ],
    "max": [
      0.675000011920929,
      1.0425000001862645,
      0.8999999761581421
    ]
  },
  "size": [
    1.350000023841858,
    1.042500000372529,
    1.7999999523162842
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 0,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 0,
      "blindSocketHeads": 0,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 0,
    "warnings": [
      "NO_APPLICABLE_MANUFACTURING_PRIMITIVE_REQUIRES_MODEL_SPECIFIC_REVIEW"
    ],
    "changedMeshes": 0,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 7864,
      "afterTriangles": 7864,
      "reachedTarget": true,
      "changedMeshes": 0,
      "changes": [],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/t-641f709d-984d-558d-851a-ecd8a8f7f908.mjs",
    "sourceSha256": "sha256:ff4e78ab40b4c59b30edfcdf78f45647985dd3b1bc475b3e095103ac4b123371",
    "deliverySha256": "sha256:ff4e78ab40b4c59b30edfcdf78f45647985dd3b1bc475b3e095103ac4b123371",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:4b5f4ea66bca63c542cce89fbd3bd19986d58595808e72349337d148ff2eadcc",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:4b5f4ea66bca63c542cce89fbd3bd19986d58595808e72349337d148ff2eadcc",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [
    {
      "id": "pivot_height",
      "type": "number",
      "unit": "m",
      "min": 0.85,
      "max": 1,
      "default": 0.92
    }
  ],
  "parameterValues": {
    "pivot_height": 0.92
  },
  "joints": [
    {
      "id": "pallet_tilt",
      "label": "pallet_tilt",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "unit": "rad",
      "min": 0,
      "max": 1.5707963267948966,
      "initial": 0
    },
    {
      "id": "clamp",
      "label": "clamp",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "unit": "m",
      "min": 0,
      "max": 0.04,
      "initial": 0
    }
  ],
  "initialState": {
    "pallet_tilt": 0,
    "clamp": 0
  },
  "bindings": [
    {
      "id": "pallet_tilt",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0.92,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame",
      "gltfNode": 11
    },
    {
      "id": "clamp",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp",
      "gltfNode": 16
    }
  ],
  "jointBindings": [
    {
      "id": "pallet_tilt",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0.92,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame",
      "gltfNode": 11
    },
    {
      "id": "clamp",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp",
      "gltfNode": 16
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
      "nodeName": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "clamp-contact": {
      "id": "clamp-contact",
      "node": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp/t-641f709d-984d-558d-851a-ecd8a8f7f908:clamp-contact",
      "nodeName": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp/t-641f709d-984d-558d-851a-ecd8a8f7f908:clamp-contact",
      "gltfNode": 24,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.36,
        1.0175,
        0,
        1
      ],
      "position": [
        0.36,
        1.0175,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "infeed-datum": {
      "id": "infeed-datum",
      "node": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/t-641f709d-984d-558d-851a-ecd8a8f7f908:infeed-datum",
      "nodeName": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/t-641f709d-984d-558d-851a-ecd8a8f7f908:infeed-datum",
      "gltfNode": 33,
      "matrix": [
        2.220446049250313e-16,
        0,
        -0.9999999999999998,
        0,
        0,
        1,
        0,
        0,
        0.9999999999999998,
        0,
        2.220446049250313e-16,
        0,
        -0.49,
        0.9450000000000001,
        0,
        1
      ],
      "position": [
        -0.49,
        0.9450000000000001,
        0
      ],
      "quaternion": [
        0,
        0.7071067811865475,
        0,
        0.7071067811865476
      ]
    },
    "outfeed-datum": {
      "id": "outfeed-datum",
      "node": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/t-641f709d-984d-558d-851a-ecd8a8f7f908:outfeed-datum",
      "nodeName": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/t-641f709d-984d-558d-851a-ecd8a8f7f908:outfeed-datum",
      "gltfNode": 34,
      "matrix": [
        2.220446049250313e-16,
        0,
        -0.9999999999999998,
        0,
        0,
        1,
        0,
        0,
        0.9999999999999998,
        0,
        2.220446049250313e-16,
        0,
        0.49,
        0.9450000000000001,
        0,
        1
      ],
      "position": [
        0.49,
        0.9450000000000001,
        0
      ],
      "quaternion": [
        0,
        0.7071067811865475,
        0,
        0.7071067811865476
      ]
    },
    "work-datum": {
      "id": "work-datum",
      "node": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/t-641f709d-984d-558d-851a-ecd8a8f7f908:work-datum",
      "nodeName": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/t-641f709d-984d-558d-851a-ecd8a8f7f908:work-datum",
      "gltfNode": 35,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -0.9999999999999998,
        0,
        0,
        0.9999999999999998,
        2.220446049250313e-16,
        0,
        0,
        0.9450000000000001,
        0,
        1
      ],
      "position": [
        0,
        0.9450000000000001,
        0
      ],
      "quaternion": [
        -0.7071067811865475,
        0,
        0,
        0.7071067811865476
      ]
    },
    "supply-face": {
      "id": "supply-face",
      "node": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/t-641f709d-984d-558d-851a-ecd8a8f7f908:supply-face",
      "nodeName": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/t-641f709d-984d-558d-851a-ecd8a8f7f908:supply-face",
      "gltfNode": 40,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.4,
        0.12,
        0.8,
        1
      ],
      "position": [
        0.4,
        0.12,
        0.8
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "hydraulic-return-face": {
      "id": "hydraulic-return-face",
      "node": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/t-641f709d-984d-558d-851a-ecd8a8f7f908:hydraulic-return-face",
      "nodeName": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/t-641f709d-984d-558d-851a-ecd8a8f7f908:hydraulic-return-face",
      "gltfNode": 42,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.425,
        0.12,
        0.8,
        1
      ],
      "position": [
        0.425,
        0.12,
        0.8
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    }
  },
  "ports": {
    "mount": "base",
    "infeed": "infeed-datum",
    "outfeed": "outfeed-datum",
    "work": "work-datum",
    "supply": "supply-face",
    "return": "hydraulic-return-face"
  },
  "nodes": [
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 0,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 0,
            "blindSocketHeads": 0,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 0,
          "warnings": [
            "NO_APPLICABLE_MANUFACTURING_PRIMITIVE_REQUIRES_MODEL_SPECIFIC_REVIEW"
          ],
          "changedMeshes": 0,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 7864,
            "afterTriangles": 7864,
            "reachedTarget": true,
            "changedMeshes": 0,
            "changes": [],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
          "coordinate_profile": "lib3d-world/1",
          "label": "팔레트 하부 검사 경동대",
          "category": "intralogistics-storage/inspection-handling",
          "summary": "비어 있는 운반 팔레트를 수직 구속하여 하부 구조 노출",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [
            {
              "id": "pivot_height",
              "type": "number",
              "unit": "m",
              "min": 0.85,
              "max": 1,
              "default": 0.92
            }
          ],
          "joints": [
            {
              "id": "pallet_tilt",
              "label": "pallet_tilt",
              "kind": "revolute",
              "axis": [
                0,
                0,
                1
              ],
              "unit": "rad",
              "min": 0,
              "max": 1.5707963267948966,
              "initial": 0
            },
            {
              "id": "clamp",
              "label": "clamp",
              "kind": "prismatic",
              "axis": [
                0,
                -1,
                0
              ],
              "unit": "m",
              "min": 0,
              "max": 0.04,
              "initial": 0
            }
          ],
          "ports": {
            "mount": "base",
            "infeed": "infeed-datum",
            "outfeed": "outfeed-datum",
            "work": "work-datum",
            "supply": "supply-face",
            "return": "hydraulic-return-face"
          },
          "required_host_features": [
            "prismatic",
            "revolute"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "Own nominal industrial mechanism, authored2026-11-10. No manufacturer CAD, ratings, measured accuracy, force, pressure, process capacity or physical certification."
            }
          ],
          "expansionCandidate": {
            "sourceCandidateId": "pallet-inspection-turntable",
            "candidateId": "intralogistics-storage.pallet-inspection-turntable",
            "stableKey": "lib3d:type:v1:intralogistics-storage/inspection-handling/pallet-inspection-turntable",
            "typeUid": "urn:uuid:641f709d-984d-558d-851a-ecd8a8f7f908",
            "deliveryAssetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
            "publicationStatus": "UNPUBLISHED_RELEASE_CANDIDATE"
          },
          "installation": {
            "mode": "FLOOR_STANDING",
            "datumFrame": "base",
            "floorPolicy": "FIXED_LOCAL_GROUND",
            "basis": "Own nominal foundation datum. External world installation and physical operation NOT_RUN."
          },
          "readiness": {
            "display": "DISPLAY_PREVIEW",
            "core_verified": false,
            "physical_execution_eligible": false
          },
          "known_limitations": [
            "A real rotary hydraulic drive is chosen instead of a stretching cylinder/four-bar; pallet underside remains open, no structural/load certification."
          ],
          "conservative_bounds_m": {
            "min": [
              -0.75,
              0,
              -0.95
            ],
            "max": [
              0.75,
              1.6,
              0.95
            ]
          },
          "physicalExecution": "NOT_RUN",
          "sourcePreviewTrajectory": {
            "schema": "lib3d-source-preview-trajectory/1",
            "durationMs": 3000,
            "keyframes": [
              {
                "timeMs": 0,
                "state": {
                  "pallet_tilt": 0,
                  "clamp": 0
                }
              },
              {
                "timeMs": 1000,
                "state": {
                  "pallet_tilt": 1.5707963267948966,
                  "clamp": 0.04
                }
              },
              {
                "timeMs": 2000,
                "state": {
                  "pallet_tilt": 0.7853981633974483,
                  "clamp": 0.02
                }
              },
              {
                "timeMs": 3000,
                "state": {
                  "pallet_tilt": 0,
                  "clamp": 0
                }
              }
            ],
            "scope": "DISPLAY_PREVIEW",
            "physicalExecution": "NOT_RUN"
          },
          "supply_interfaces": [
            {
              "port": "supply",
              "frame": "supply-face",
              "portClass": "hydraulic",
              "flow_state": "NOT_SIMULATED"
            },
            {
              "port": "return",
              "frame": "hydraulic-return-face",
              "portClass": "hydraulic-return",
              "flow_state": "NOT_SIMULATED"
            }
          ],
          "nominalInterfaceClearances": [
            {
              "interface": "trunnion / bearing",
              "radialClearanceM": 0.0015,
              "classification": "NOMINAL_RUNNING_INTERFACE"
            }
          ],
          "originalNominalActuatorTopology": "Direct hydraulic rotary actuator coaxial with rigid trunnion shaft, not a stretched or solved linkage. Open table exposes the underside of a nominal empty pallet; retention gap 32.5–72.5mm, no pallet shape/contact or force simulation.",
          "sdk_version": "1.1.0"
        },
        "parameters": {
          "pivot_height": 0.92
        },
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
          "clamp-contact": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp/t-641f709d-984d-558d-851a-ecd8a8f7f908:clamp-contact",
          "infeed-datum": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/t-641f709d-984d-558d-851a-ecd8a8f7f908:infeed-datum",
          "outfeed-datum": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/t-641f709d-984d-558d-851a-ecd8a8f7f908:outfeed-datum",
          "work-datum": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/t-641f709d-984d-558d-851a-ecd8a8f7f908:work-datum",
          "supply-face": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/t-641f709d-984d-558d-851a-ecd8a8f7f908:supply-face",
          "hydraulic-return-face": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/t-641f709d-984d-558d-851a-ecd8a8f7f908:hydraulic-return-face"
        },
        "jointBindings": [
          {
            "id": "pallet_tilt",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0,
              0.92,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame"
          },
          {
            "id": "clamp",
            "kind": "prismatic",
            "axis": [
              0,
              -1,
              0
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp"
          }
        ],
        "joints": [
          {
            "id": "pallet_tilt",
            "label": "pallet_tilt",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "unit": "rad",
            "min": 0,
            "max": 1.5707963267948966,
            "initial": 0,
            "value": 0
          },
          {
            "id": "clamp",
            "label": "clamp",
            "kind": "prismatic",
            "axis": [
              0,
              -1,
              0
            ],
            "unit": "m",
            "min": 0,
            "max": 0.04,
            "initial": 0,
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 38
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "Own nominal industrial mechanism, authored2026-11-10. No manufacturer CAD, ratings, measured accuracy, force, pressure, process capacity or physical certification."
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "pallet_tilt": 0,
          "clamp": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
        "scope": "DISPLAY_PREVIEW",
        "core_verified": false,
        "physical_execution_eligible": false,
        "physicalExecution": "NOT_RUN",
        "mediaState": "NOT_SIMULATED"
      },
      "gltfNode": 1
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/inspection-tilt-floor-foundation",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.0125,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/inspection-tilt-floor-foundation",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1
      },
      "gltfNode": 2
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/full-height-trunnion-load-cheek--0.48",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.505,
        -0.48,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/full-height-trunnion-load-cheek--0.48",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 3
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/true-pivot-journal-bearing--0.48",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.92,
        -0.48,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/true-pivot-journal-bearing--0.48",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1,
        "boreRadiusM": 0.0215,
        "boreAxis": "z"
      },
      "gltfNode": 4
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/cheek-ground-flange--0.48",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.0325,
        -0.48,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/cheek-ground-flange--0.48",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 5
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/full-height-trunnion-load-cheek-0.48",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.505,
        0.48,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/full-height-trunnion-load-cheek-0.48",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 6
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/true-pivot-journal-bearing-0.48",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.92,
        0.48,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/true-pivot-journal-bearing-0.48",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1,
        "boreRadiusM": 0.0215,
        "boreAxis": "z"
      },
      "gltfNode": 7
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/cheek-ground-flange-0.48",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.0325,
        0.48,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/cheek-ground-flange-0.48",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 8
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/hydraulic-rotary-actuator-mount-flange",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.92,
        0.555,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/hydraulic-rotary-actuator-mount-flange",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1,
        "boreRadiusM": 0.0275,
        "boreAxis": "z",
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 9
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/hydraulic-direct-coaxial-tilt-actuator",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.92,
        0.66,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/hydraulic-direct-coaxial-tilt-actuator",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1,
        "boreRadiusM": 0.0275,
        "boreAxis": "z",
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 10
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.92,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "open-centre-pallet-inspection-tilt-frame"
      },
      "gltfNode": 11
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/continuous-trunnion-torque-shaft",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/continuous-trunnion-torque-shaft",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "shaft-or-actuator-body",
        "BOMqty": 1
      },
      "gltfNode": 12
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/hydraulic-actuator-rotor",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.63,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/hydraulic-actuator-rotor",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1,
        "boreRadiusM": 0.02,
        "boreAxis": "z"
      },
      "gltfNode": 13
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/pallet-understructure-inspection-window",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.0125,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/pallet-understructure-inspection-window",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1
      },
      "gltfNode": 14
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/downhill-pallet-heel-restraint",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.4775,
        0.065,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/downhill-pallet-heel-restraint",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-structural-part",
        "BOMqty": 1
      },
      "gltfNode": 15
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "two-bar-pallet-retention-clamp"
      },
      "gltfNode": 16
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp/pallet-retaining-crossbar--0.36",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.36,
        0.11,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp/pallet-retaining-crossbar--0.36",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-structural-part",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 17
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp/constant-length-pallet-clamp-rod--0.36--0.4",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.36,
        0,
        -0.4,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp/constant-length-pallet-clamp-rod--0.36--0.4",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "shaft-or-actuator-body",
        "BOMqty": 1
      },
      "gltfNode": 18
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp/constant-length-pallet-clamp-rod--0.36-0.4",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.36,
        0,
        0.4,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp/constant-length-pallet-clamp-rod--0.36-0.4",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "shaft-or-actuator-body",
        "BOMqty": 1
      },
      "gltfNode": 19
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp/pallet-retaining-crossbar-0.36",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.36,
        0.11,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp/pallet-retaining-crossbar-0.36",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-structural-part",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 20
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp/constant-length-pallet-clamp-rod-0.36--0.4",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.36,
        0,
        -0.4,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp/constant-length-pallet-clamp-rod-0.36--0.4",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "shaft-or-actuator-body",
        "BOMqty": 1
      },
      "gltfNode": 21
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp/constant-length-pallet-clamp-rod-0.36-0.4",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.36,
        0,
        0.4,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp/constant-length-pallet-clamp-rod-0.36-0.4",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "shaft-or-actuator-body",
        "BOMqty": 1
      },
      "gltfNode": 22
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp/outboard-clamp-synchronizing-yoke",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.11,
        0.4,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp/outboard-clamp-synchronizing-yoke",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-structural-part",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 23
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp/t-641f709d-984d-558d-851a-ecd8a8f7f908:clamp-contact",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/two-bar-pallet-retention-clamp",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.36,
        0.0975,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908:clamp-contact"
      },
      "gltfNode": 24
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/clamp-cylinder-fixed-case--0.36--0.4",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.36,
        -0.08,
        -0.4,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/clamp-cylinder-fixed-case--0.36--0.4",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1,
        "boreRadiusM": 0.01,
        "boreAxis": "y",
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 25
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/clamp-cylinder-structural-ear--0.36--0.4",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.36,
        -0.0025000000000000005,
        -0.39,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/clamp-cylinder-structural-ear--0.36--0.4",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 26
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/clamp-cylinder-fixed-case--0.36-0.4",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.36,
        -0.08,
        0.4,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/clamp-cylinder-fixed-case--0.36-0.4",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1,
        "boreRadiusM": 0.01,
        "boreAxis": "y",
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 27
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/clamp-cylinder-structural-ear--0.36-0.4",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.36,
        -0.0025000000000000005,
        0.39,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/clamp-cylinder-structural-ear--0.36-0.4",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 28
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/clamp-cylinder-fixed-case-0.36--0.4",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.36,
        -0.08,
        -0.4,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/clamp-cylinder-fixed-case-0.36--0.4",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1,
        "boreRadiusM": 0.01,
        "boreAxis": "y",
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 29
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/clamp-cylinder-structural-ear-0.36--0.4",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.36,
        -0.0025000000000000005,
        -0.39,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/clamp-cylinder-structural-ear-0.36--0.4",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 30
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/clamp-cylinder-fixed-case-0.36-0.4",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.36,
        -0.08,
        0.4,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/clamp-cylinder-fixed-case-0.36-0.4",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1,
        "boreRadiusM": 0.01,
        "boreAxis": "y",
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 31
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/clamp-cylinder-structural-ear-0.36-0.4",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.36,
        -0.0025000000000000005,
        0.39,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/clamp-cylinder-structural-ear-0.36-0.4",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 32
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/t-641f709d-984d-558d-851a-ecd8a8f7f908:infeed-datum",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        -0.9999999999999998,
        0,
        0,
        1,
        0,
        0,
        0.9999999999999998,
        0,
        2.220446049250313e-16,
        0,
        -0.49,
        0.025,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908:infeed-datum"
      },
      "gltfNode": 33
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/t-641f709d-984d-558d-851a-ecd8a8f7f908:outfeed-datum",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        -0.9999999999999998,
        0,
        0,
        1,
        0,
        0,
        0.9999999999999998,
        0,
        2.220446049250313e-16,
        0,
        0.49,
        0.025,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908:outfeed-datum"
      },
      "gltfNode": 34
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame/t-641f709d-984d-558d-851a-ecd8a8f7f908:work-datum",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/open-centre-pallet-inspection-tilt-frame",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -0.9999999999999998,
        0,
        0,
        0.9999999999999998,
        2.220446049250313e-16,
        0,
        0,
        0.025,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908:work-datum"
      },
      "gltfNode": 35
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/inspection-hydraulic-mount-foot",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.4,
        0.031,
        0.73,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/inspection-hydraulic-mount-foot",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1
      },
      "gltfNode": 36
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/inspection-hydraulic-mount-rib",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.4,
        0.066,
        0.745,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/inspection-hydraulic-mount-rib",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-structural-part",
        "BOMqty": 1
      },
      "gltfNode": 37
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/inspection-hydraulic-manifold",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.4,
        0.12,
        0.766,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/inspection-hydraulic-manifold",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1
      },
      "gltfNode": 38
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/inspection-hydraulic-threaded-fitting",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.4,
        0.12,
        0.786,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/inspection-hydraulic-threaded-fitting",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1,
        "boreRadiusM": 0.0035,
        "boreAxis": "z"
      },
      "gltfNode": 39
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/t-641f709d-984d-558d-851a-ecd8a8f7f908:supply-face",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.4,
        0.12,
        0.8,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908:supply-face"
      },
      "gltfNode": 40
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/hydraulic-return-fitting",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.425,
        0.12,
        0.786,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/hydraulic-return-fitting",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "machined-profile-with-apertures",
        "BOMqty": 1,
        "boreRadiusM": 0.0035,
        "boreAxis": "z"
      },
      "gltfNode": 41
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/t-641f709d-984d-558d-851a-ecd8a8f7f908:hydraulic-return-face",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.425,
        0.12,
        0.8,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908:hydraulic-return-face"
      },
      "gltfNode": 42
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.4,
        0.0285,
        -0.75,
        1
      ],
      "sourceUserData": {
        "partId": "DS_Brand_Plate",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 43
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "badge-orient",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 44
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient/badge-bezel",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient/badge-bezel",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 45
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient/badge-backing",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient/badge-backing",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 46
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient/badge-rivet-0",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.06675,
        -0.01675,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient/badge-rivet-0",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 47
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient/badge-rivet-1",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.06675,
        0.01675,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient/badge-rivet-1",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 48
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient/badge-rivet-2",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.06675,
        -0.01675,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient/badge-rivet-2",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 49
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient/badge-rivet-3",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.06675,
        0.01675,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient/badge-rivet-3",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 50
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient/badge-D",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.028999999999999998,
        0,
        0,
        0,
        0,
        0.028999999999999998,
        0,
        0,
        0,
        0,
        0.00315,
        0,
        -0.012759999999999999,
        0,
        0.0030275000000000002,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient/badge-D",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 51
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient/badge-S",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.028999999999999998,
        0,
        0,
        0,
        0,
        0.028999999999999998,
        0,
        0,
        0,
        0,
        0.00315,
        0,
        0.012759999999999999,
        0,
        0.0030275000000000002,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient/badge-S",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 52
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient/badge-D-back",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.028999999999999998,
        0,
        -3.551475717527324e-18,
        0,
        0,
        0.028999999999999998,
        0,
        0,
        3.8576374173141626e-19,
        0,
        -0.00315,
        0,
        0.012759999999999999,
        0,
        -0.0030275000000000002,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient/badge-D-back",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 53
    },
    {
      "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient/badge-S-back",
      "parent": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.028999999999999998,
        0,
        -3.551475717527324e-18,
        0,
        0,
        0.028999999999999998,
        0,
        0,
        3.8576374173141626e-19,
        0,
        -0.00315,
        0,
        -0.012759999999999999,
        0,
        -0.0030275000000000002,
        1
      ],
      "sourceUserData": {
        "partId": "t-641f709d-984d-558d-851a-ecd8a8f7f908/t-641f709d-984d-558d-851a-ecd8a8f7f908:base/DS_Brand_Plate/badge-orient/badge-S-back",
        "assetId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 54
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "Own nominal industrial mechanism, authored2026-11-10. No manufacturer CAD, ratings, measured accuracy, force, pressure, process capacity or physical certification."
    }
  ],
  "rights": {
    "id": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
    "assetTypeId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:ff4e78ab40b4c59b30edfcdf78f45647985dd3b1bc475b3e095103ac4b123371",
    "modelSource": "kit/models/t-641f709d-984d-558d-851a-ecd8a8f7f908.mjs",
    "dslExampleSource": "dsl/models/t-641f709d-984d-558d-851a-ecd8a8f7f908.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/t-641f709d-984d-558d-851a-ecd8a8f7f908.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/t-641f709d-984d-558d-851a-ecd8a8f7f908.txt",
      "sha256": "sha256:739e1dfc482c2299d25a4df8acd1333cf0651fb6426017a74905216b3414829b",
      "bytes": 820
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/t-641f709d-984d-558d-851a-ecd8a8f7f908/model.glb",
      "bytes": 797192,
      "sha256": "sha256:c29bd8c2135131a88793a344ddf702830fa0844c33ded5ee2e6db9c369558de9"
    },
    "licenses": [
      {
        "path": "open-assets/t-641f709d-984d-558d-851a-ecd8a8f7f908/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/t-641f709d-984d-558d-851a-ecd8a8f7f908/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/t-641f709d-984d-558d-851a-ecd8a8f7f908/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/t-641f709d-984d-558d-851a-ecd8a8f7f908/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/t-641f709d-984d-558d-851a-ecd8a8f7f908/LICENSES/ASSET-NOTICES/t-641f709d-984d-558d-851a-ecd8a8f7f908.txt",
        "bytes": 820,
        "sha256": "sha256:739e1dfc482c2299d25a4df8acd1333cf0651fb6426017a74905216b3414829b"
      }
    ],
    "source": {
      "path": "kit/models/t-641f709d-984d-558d-851a-ecd8a8f7f908.mjs",
      "bytes": 15484,
      "sha256": "sha256:ff4e78ab40b4c59b30edfcdf78f45647985dd3b1bc475b3e095103ac4b123371"
    },
    "ds2": {
      "path": "dsl/models/t-641f709d-984d-558d-851a-ecd8a8f7f908.ds2",
      "bytes": 2683,
      "sha256": "sha256:014279f2750fb7a1d062adc71ddfbcb1285b042510898b91d47beb018b6655b4",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 55,
    "triangles": 7864,
    "maxMatrixError": 4.930380657631324e-32,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 9,
    "nodeComparisons": 495,
    "semanticFrameComparisons": 63,
    "acceptanceCases": 2,
    "acceptanceFrameComparisons": 4,
    "maxMotionMatrixError": 4.930380657631324e-32
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "t-641f709d-984d-558d-851a-ecd8a8f7f908",
    "kind": "equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "intralogistics-storage/inspection-handling",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": false,
    "parameters": [
      {
        "id": "pivot_height",
        "type": "number",
        "unit": "m",
        "min": 0.85,
        "max": 1,
        "default": 0.92
      }
    ],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "infeed": {
        "frameId": "infeed-datum",
        "portClass": "material-flow",
        "direction": "input",
        "quaternion": [
          0,
          1,
          0,
          0
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -0.49,
            0.9450000000000001,
            0
          ],
          "quaternion": [
            0,
            0.7071067811865476,
            0,
            -0.7071067811865475
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "outfeed": {
        "frameId": "outfeed-datum",
        "portClass": "material-flow",
        "direction": "output",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.49,
            0.9450000000000001,
            0
          ],
          "quaternion": [
            0,
            0.7071067811865475,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "work": {
        "frameId": "work-datum",
        "portClass": "process",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0.9450000000000001,
            0
          ],
          "quaternion": [
            -0.7071067811865475,
            0,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "supply": {
        "frameId": "supply-face",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.4,
            0.12,
            0.8
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "return": {
        "frameId": "hydraulic-return-face",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.425,
            0.12,
            0.8
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
