{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
  "assetTypeId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
  "label": "오거 분말 충전기",
  "category": "packaging-dosing / portioning",
  "description": "Actual original hollow hopper/fill tube, retained screw flight/shaft/motor and separate physically guided terminal cutoff gate with genuine voids. No powder motion, dosing mass, torque, sealing or achieved fill.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -0.30000001192092896,
      2.2351741811588166e-10,
      -0.25
    ],
    "max": [
      0.3630000001899898,
      0.7039999998807908,
      0.25
    ]
  },
  "size": [
    0.6630000121109187,
    0.7039999996572733,
    0.5
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 0,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 0,
      "blindSocketHeads": 0,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 0,
    "warnings": [
      "NO_APPLICABLE_MANUFACTURING_PRIMITIVE_REQUIRES_MODEL_SPECIFIC_REVIEW"
    ],
    "changedMeshes": 0,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 10768,
      "afterTriangles": 10768,
      "reachedTarget": true,
      "changedMeshes": 0,
      "changes": [],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22.mjs",
    "sourceSha256": "sha256:373773b7a2e17fd11524955959b398e52291400d2954dfa5df229bb4771c5e39",
    "deliverySha256": "sha256:373773b7a2e17fd11524955959b398e52291400d2954dfa5df229bb4771c5e39",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:9c840dd58be7a88a407d94e08b3c250e981589553715c2db5ed1e6c2824801d2",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:9c840dd58be7a88a407d94e08b3c250e981589553715c2db5ed1e6c2824801d2",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [
    {
      "id": "hopper_top_radius",
      "type": "number",
      "unit": "m",
      "min": 0.17,
      "max": 0.19,
      "default": 0.18
    }
  ],
  "parameterValues": {
    "hopper_top_radius": 0.18
  },
  "joints": [
    {
      "id": "auger",
      "label": "auger",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "min": 0,
      "max": 6.283185307179586,
      "initial": 0,
      "unit": "rad"
    },
    {
      "id": "cutoff",
      "label": "cutoff",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "min": 0,
      "max": 0.11,
      "initial": 0,
      "unit": "m"
    }
  ],
  "initialState": {
    "auger": 0,
    "cutoff": 0
  },
  "bindings": [
    {
      "id": "auger",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight",
      "gltfNode": 14
    },
    {
      "id": "cutoff",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer",
      "gltfNode": 37
    }
  ],
  "jointBindings": [
    {
      "id": "auger",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight",
      "gltfNode": 14
    },
    {
      "id": "cutoff",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer",
      "gltfNode": 37
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "nodeName": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "mount": {
      "id": "mount",
      "node": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:mount",
      "nodeName": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:mount",
      "gltfNode": 44,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        0.9999999999999998,
        0,
        0,
        -0.9999999999999998,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0.7071067811865475,
        0,
        0,
        0.7071067811865476
      ]
    },
    "infeed": {
      "id": "infeed",
      "node": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:infeed",
      "nodeName": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:infeed",
      "gltfNode": 45,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -0.9999999999999998,
        0,
        0,
        0.9999999999999998,
        2.220446049250313e-16,
        0,
        0.1,
        0.55,
        0,
        1
      ],
      "position": [
        0.1,
        0.55,
        0
      ],
      "quaternion": [
        -0.7071067811865475,
        0,
        0,
        0.7071067811865476
      ]
    },
    "outfeed": {
      "id": "outfeed",
      "node": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:outfeed",
      "nodeName": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:outfeed",
      "gltfNode": 46,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        0.9999999999999998,
        0,
        0,
        -0.9999999999999998,
        2.220446049250313e-16,
        0,
        0,
        0.12,
        0,
        1
      ],
      "position": [
        0,
        0.12,
        0
      ],
      "quaternion": [
        0.7071067811865475,
        0,
        0,
        0.7071067811865476
      ]
    },
    "work": {
      "id": "work",
      "node": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:work",
      "nodeName": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:work",
      "gltfNode": 47,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        0.9999999999999998,
        0,
        0,
        -0.9999999999999998,
        2.220446049250313e-16,
        0,
        0,
        0.135,
        0,
        1
      ],
      "position": [
        0,
        0.135,
        0
      ],
      "quaternion": [
        0.7071067811865475,
        0,
        0,
        0.7071067811865476
      ]
    },
    "cutoff_edge": {
      "id": "cutoff_edge",
      "node": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:cutoff_edge",
      "nodeName": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:cutoff_edge",
      "gltfNode": 43,
      "matrix": [
        2.220446049250313e-16,
        0,
        0.9999999999999998,
        0,
        0,
        1,
        0,
        0,
        -0.9999999999999998,
        0,
        2.220446049250313e-16,
        0,
        -0.05,
        0.126,
        0,
        1
      ],
      "position": [
        -0.05,
        0.126,
        0
      ],
      "quaternion": [
        0,
        -0.7071067811865475,
        0,
        0.7071067811865476
      ]
    },
    "auger-phase": {
      "id": "auger-phase",
      "node": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:auger-phase",
      "nodeName": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:auger-phase",
      "gltfNode": 21,
      "matrix": [
        2.220446049250313e-16,
        0,
        -0.9999999999999998,
        0,
        0,
        1,
        0,
        0,
        0.9999999999999998,
        0,
        2.220446049250313e-16,
        0,
        0.032,
        0.696,
        0,
        1
      ],
      "position": [
        0.032,
        0.696,
        0
      ],
      "quaternion": [
        0,
        0.7071067811865475,
        0,
        0.7071067811865476
      ]
    }
  },
  "ports": {
    "mount": "mount",
    "infeed": "infeed",
    "outfeed": "outfeed",
    "work": "work",
    "cutoff_edge": "cutoff_edge",
    "phase": "auger-phase"
  },
  "nodes": [
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 0,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 0,
            "blindSocketHeads": 0,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 0,
          "warnings": [
            "NO_APPLICABLE_MANUFACTURING_PRIMITIVE_REQUIRES_MODEL_SPECIFIC_REVIEW"
          ],
          "changedMeshes": 0,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 10768,
            "afterTriangles": 10768,
            "reachedTarget": true,
            "changedMeshes": 0,
            "changes": [],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
          "coordinate_profile": "lib3d-world/1",
          "label": "오거 분말 충전기",
          "category": "packaging-dosing/portioning",
          "summary": "Actual original hollow hopper/fill tube, retained screw flight/shaft/motor and separate physically guided terminal cutoff gate with genuine voids. No powder motion, dosing mass, torque, sealing or achieved fill.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [
            {
              "id": "hopper_top_radius",
              "type": "number",
              "unit": "m",
              "min": 0.17,
              "max": 0.19,
              "default": 0.18
            }
          ],
          "joints": [
            {
              "id": "auger",
              "label": "auger",
              "kind": "revolute",
              "axis": [
                0,
                1,
                0
              ],
              "min": 0,
              "max": 6.283185307179586,
              "initial": 0,
              "unit": "rad"
            },
            {
              "id": "cutoff",
              "label": "cutoff",
              "kind": "prismatic",
              "axis": [
                1,
                0,
                0
              ],
              "min": 0,
              "max": 0.11,
              "initial": 0,
              "unit": "m"
            }
          ],
          "ports": {
            "mount": "mount",
            "infeed": "infeed",
            "outfeed": "outfeed",
            "work": "work",
            "cutoff_edge": "cutoff_edge",
            "phase": "auger-phase"
          },
          "required_host_features": [
            "prismatic",
            "revolute"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "Own nominal architecture in metres/radians. No manufacturer CAD, ratings, physical or control certification."
            }
          ],
          "conservative_bounds_m": {
            "min": [
              -0.31,
              -0.001,
              -0.26
            ],
            "max": [
              0.46,
              0.71,
              0.26
            ]
          },
          "readiness": {
            "display": "DISPLAY_PREVIEW",
            "core_verified": false,
            "physical_execution_eligible": false
          },
          "expansionCandidate": {
            "sourceCandidateId": "auger-powder-filler",
            "candidateId": "packaging-dosing.auger-powder-filler",
            "stableKey": "lib3d:type:v1:packaging-dosing/portioning/auger-powder-filler",
            "typeUid": "urn:uuid:3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
            "displayCode": "L3D-000920",
            "deliveryAssetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22"
          },
          "installation": {
            "mode": "MOUNTED_COMPONENT",
            "datumFrame": "mount",
            "floorPolicy": "NOT_APPLICABLE_WITHOUT_EXTERNAL_INSTALLATION",
            "basis": "Nominal flange datum; external world installation NOT_RUN."
          },
          "sourcePreviewTrajectory": {
            "schema": "lib3d-source-preview-trajectory/1",
            "durationMs": 3000,
            "keyframes": [
              {
                "timeMs": 0,
                "state": {
                  "auger": 0,
                  "cutoff": 0
                }
              },
              {
                "timeMs": 1000,
                "state": {
                  "auger": 6.283185307179586,
                  "cutoff": 0.11
                }
              },
              {
                "timeMs": 2000,
                "state": {
                  "auger": 3.141592653589793,
                  "cutoff": 0.055
                }
              },
              {
                "timeMs": 3000,
                "state": {
                  "auger": 0,
                  "cutoff": 0
                }
              }
            ],
            "scope": "DISPLAY_PREVIEW",
            "physicalExecution": "NOT_RUN"
          },
          "known_limitations": [
            "Actual original hollow hopper/fill tube, retained screw flight/shaft/motor and separate physically guided terminal cutoff gate with genuine voids. No powder motion, dosing mass, torque, sealing or achieved fill.",
            "Own nominal rigid geometry/commanded poses only. No actual material flow, deformation, force, measurements, autonomous timing, physical installation or process achievement."
          ],
          "componentSimulationExclusions": {
            "powder": "NOT_MODELED",
            "dosingMass": "NOT_SIMULATED",
            "cutoffSealForce": "NOT_SIMULATED",
            "terminalGate": "Constant unloaded blade on real open guide channels; finite gap, no certified seal."
          },
          "measurementPolicy": {
            "measuredValue": null,
            "measuredQuality": "UNKNOWN",
            "scope": "Geometry, mechanical command and functional datums only. Sensor output/force/field/chemistry/flow/calibration NOT_RUN."
          },
          "sdk_version": "1.1.0"
        },
        "parameters": {
          "hopper_top_radius": 0.18
        },
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
          "mount": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:mount",
          "infeed": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:infeed",
          "outfeed": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:outfeed",
          "work": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:work",
          "cutoff_edge": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:cutoff_edge",
          "auger-phase": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:auger-phase"
        },
        "jointBindings": [
          {
            "id": "auger",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight"
          },
          {
            "id": "cutoff",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer"
          }
        ],
        "joints": [
          {
            "id": "auger",
            "label": "auger",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "min": 0,
            "max": 6.283185307179586,
            "initial": 0,
            "unit": "rad",
            "value": 0
          },
          {
            "id": "cutoff",
            "label": "cutoff",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "min": 0,
            "max": 0.11,
            "initial": 0,
            "unit": "m",
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 43
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "Own nominal architecture in metres/radians. No manufacturer CAD, ratings, physical or control certification."
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "auger": 0,
          "cutoff": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
        "auger": "One constant5turn developed flight and retained shaft in real open hopper/fill tube.",
        "cutoff": "Independent constant unloaded blade with physically open guide channels and tubular electric linear drive; gate remains4mm below nozzle.",
        "powderDoseMassSealForce": "NOT_SIMULATED",
        "externalContainer": "NOT_MODELED",
        "scope": "DISPLAY_PREVIEW",
        "core_verified": false,
        "physical_execution_eligible": false,
        "assemblyRole": "reusable-mechanism",
        "BOMqty": 1
      },
      "gltfNode": 1
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-filler-anchor-base-with-open-discharge",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.01,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-filler-anchor-base-with-open-discharge",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-plate",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualThroughHoles": 5,
        "actualWindows": 0
      },
      "gltfNode": 2
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-hopper-and-motor-support-column--0.24",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.24,
        0.315,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-hopper-and-motor-support-column--0.24",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-profile",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 3
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-hopper-and-motor-support-column-0.24",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.24,
        0.315,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-hopper-and-motor-support-column-0.24",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-profile",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 4
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-auger-motor-top-reaction-bridge",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.6,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-auger-motor-top-reaction-bridge",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-plate",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualThroughHoles": 1,
        "actualWindows": 0,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 5
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-open-conical-powder-hopper",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-open-conical-powder-hopper",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22"
      },
      "gltfNode": 6
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-full-open-fill-tube",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.2,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-full-open-fill-tube",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "bored-component",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualBoreDiameterM": 0.068
      },
      "gltfNode": 7
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-hopper-top-retention-flange",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.554,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-hopper-top-retention-flange",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "bored-component",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualBoreDiameterM": 0.36,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 8
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-hopper-flange-load-arm--1",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.22375,
        0.554,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-hopper-flange-load-arm--1",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-profile",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 9
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-hopper-flange-load-arm-1",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.22375,
        0.554,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-hopper-flange-load-arm-1",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-profile",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 10
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-auger-annular-motor-stand",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.615,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-auger-annular-motor-stand",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "bored-component",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualBoreDiameterM": 0.056
      },
      "gltfNode": 11
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-auger-annular-motor-stator",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.65,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-auger-annular-motor-stator",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "bored-component",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualBoreDiameterM": 0.05
      },
      "gltfNode": 12
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-auger-upper-bearing-cap",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.684,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-auger-upper-bearing-cap",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "bored-component",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualBoreDiameterM": 0.027
      },
      "gltfNode": 13
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "actual-one-constant-auger-spindle-and-flight"
      },
      "gltfNode": 14
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight/actual-auger-motor-rotor",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.65,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight/actual-auger-motor-rotor",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "turned-component",
        "BOMqty": 1
      },
      "gltfNode": 15
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight/actual-auger-continuous-retained-shaft",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.41,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight/actual-auger-continuous-retained-shaft",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "turned-component",
        "BOMqty": 1
      },
      "gltfNode": 16
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight/actual-constant-continuous-auger-flight",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight/actual-constant-continuous-auger-flight",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "actual-developed-helical-flight-sheet",
        "BOMqty": 1,
        "actualHelicalFlight": true,
        "turns": 5,
        "nominalLeadM": 0.07,
        "materialTransport": "NOT_SIMULATED"
      },
      "gltfNode": 17
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight/actual-auger-phase-mark",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.03,
        0.696,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight/actual-auger-phase-mark",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-profile",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 18
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight/actual-auger-phase-mark-load-arm",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.018,
        0.696,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight/actual-auger-phase-mark-load-arm",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-profile",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 19
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight/actual-upper-spindle-retention-stub",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.682,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight/actual-upper-spindle-retention-stub",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "turned-component",
        "BOMqty": 1
      },
      "gltfNode": 20
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:auger-phase",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-auger-spindle-and-flight",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        -0.9999999999999998,
        0,
        0,
        1,
        0,
        0,
        0.9999999999999998,
        0,
        2.220446049250313e-16,
        0,
        0.032,
        0.696,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:auger-phase"
      },
      "gltfNode": 21
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-lower-guide--1",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.0825,
        0.121,
        -0.058,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-lower-guide--1",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-profile",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 22
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-guide-sideweb--1",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.0825,
        0.1275,
        -0.061,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-guide-sideweb--1",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-profile",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 23
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-upper-guide--1",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.0825,
        0.134,
        -0.056,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-upper-guide--1",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-profile",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 24
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-channel-support--1--0.055",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.055,
        0.0695,
        -0.058,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-channel-support--1--0.055",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 25
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-channel-support--1-0.22",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.22,
        0.0695,
        -0.058,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-channel-support--1-0.22",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 26
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-lower-guide-1",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.0825,
        0.121,
        0.058,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-lower-guide-1",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-profile",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 27
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-guide-sideweb-1",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.0825,
        0.1275,
        0.061,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-guide-sideweb-1",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-profile",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 28
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-upper-guide-1",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.0825,
        0.134,
        0.056,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-upper-guide-1",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-profile",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 29
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-channel-support-1--0.055",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.055,
        0.0695,
        0.058,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-channel-support-1--0.055",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 30
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-channel-support-1-0.22",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.22,
        0.0695,
        0.058,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-channel-support-1-0.22",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 31
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-tubular-linear-motor-stator",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.28,
        0.148,
        0.09,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-tubular-linear-motor-stator",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "bored-component",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualBoreDiameterM": 0.025
      },
      "gltfNode": 32
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-left-guide-cap",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.201,
        0.148,
        0.09,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-left-guide-cap",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "bored-component",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualBoreDiameterM": 0.025
      },
      "gltfNode": 33
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-right-guide-cap",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.359,
        0.148,
        0.09,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-right-guide-cap",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "bored-component",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualBoreDiameterM": 0.025
      },
      "gltfNode": 34
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-linear-motor-load-pedestal-0.225",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.225,
        0.078,
        0.09,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-linear-motor-load-pedestal-0.225",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 35
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-linear-motor-load-pedestal-0.335",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.335,
        0.078,
        0.09,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-cutoff-linear-motor-load-pedestal-0.335",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 36
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "actual-one-constant-cutoff-blade-and-forcer"
      },
      "gltfNode": 37
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer/actual-constant-terminal-cutoff-blade",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.126,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer/actual-constant-terminal-cutoff-blade",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-plate",
        "BOMqty": 1,
        "functionalInterface": true,
        "actualThroughHoles": 0,
        "actualWindows": 0
      },
      "gltfNode": 38
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer/actual-blade-to-drive-real-riser",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.045,
        0.138,
        0.04,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer/actual-blade-to-drive-real-riser",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 39
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer/actual-clear-over-channel-drive-bridge",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.06,
        0.148,
        0.065,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer/actual-clear-over-channel-drive-bridge",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "machined-profile",
        "BOMqty": 1
      },
      "gltfNode": 40
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer/actual-cutoff-constant-linear-forcer",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.23,
        0.148,
        0.09,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer/actual-cutoff-constant-linear-forcer",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "turned-component",
        "BOMqty": 1
      },
      "gltfNode": 41
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer/actual-cutoff-constant-output-rod",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.13,
        0.148,
        0.09,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer/actual-cutoff-constant-output-rod",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "turned-component",
        "BOMqty": 1
      },
      "gltfNode": 42
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:cutoff_edge",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/actual-one-constant-cutoff-blade-and-forcer",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        0.9999999999999998,
        0,
        0,
        1,
        0,
        0,
        -0.9999999999999998,
        0,
        2.220446049250313e-16,
        0,
        -0.05,
        0.126,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:cutoff_edge"
      },
      "gltfNode": 43
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:mount",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        0.9999999999999998,
        0,
        0,
        -0.9999999999999998,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:mount"
      },
      "gltfNode": 44
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:infeed",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -0.9999999999999998,
        0,
        0,
        0.9999999999999998,
        2.220446049250313e-16,
        0,
        0.1,
        0.55,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:infeed"
      },
      "gltfNode": 45
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:outfeed",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        0.9999999999999998,
        0,
        0,
        -0.9999999999999998,
        2.220446049250313e-16,
        0,
        0,
        0.12,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:outfeed"
      },
      "gltfNode": 46
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:work",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        0.9999999999999998,
        0,
        0,
        -0.9999999999999998,
        2.220446049250313e-16,
        0,
        0,
        0.135,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:work"
      },
      "gltfNode": 47
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.0206,
        0.2,
        1
      ],
      "sourceUserData": {
        "partId": "ds-badge",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 48
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "badge-orient",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 49
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient/badge-bezel",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient/badge-bezel",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 50
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient/badge-backing",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient/badge-backing",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 51
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient/badge-rivet-0",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.04505,
        -0.01005,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient/badge-rivet-0",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 52
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient/badge-rivet-1",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.04505,
        0.01005,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient/badge-rivet-1",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 53
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient/badge-rivet-2",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.04505,
        -0.01005,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient/badge-rivet-2",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 54
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient/badge-rivet-3",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.04505,
        0.01005,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient/badge-rivet-3",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 55
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient/badge-D",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.0174,
        0,
        0,
        0,
        0,
        0.0174,
        0,
        0,
        0,
        0,
        0.00054,
        0,
        -0.007656,
        0,
        0.0005189999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient/badge-D",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 56
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient/badge-S",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.0174,
        0,
        0,
        0,
        0,
        0.0174,
        0,
        0,
        0,
        0,
        0.00054,
        0,
        0.007656,
        0,
        0.0005189999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient/badge-S",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 57
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient/badge-D-back",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.0174,
        0,
        -2.1308854305163943e-18,
        0,
        0,
        0.0174,
        0,
        0,
        6.613092715395708e-20,
        0,
        -0.00054,
        0,
        0.007656,
        0,
        -0.0005189999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient/badge-D-back",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 58
    },
    {
      "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient/badge-S-back",
      "parent": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.0174,
        0,
        -2.1308854305163943e-18,
        0,
        0,
        0.0174,
        0,
        0,
        6.613092715395708e-20,
        0,
        -0.00054,
        0,
        -0.007656,
        0,
        -0.0005189999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22:base/ds-badge/badge-orient/badge-S-back",
        "assetId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 59
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "Own nominal architecture in metres/radians. No manufacturer CAD, ratings, physical or control certification."
    }
  ],
  "rights": {
    "id": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
    "assetTypeId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:373773b7a2e17fd11524955959b398e52291400d2954dfa5df229bb4771c5e39",
    "modelSource": "kit/models/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22.mjs",
    "dslExampleSource": "dsl/models/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22.txt",
      "sha256": "sha256:017c5e8d676a70aa0f5bb661d4cea925bcb4ad99aa21faf76580144345cb863e",
      "bytes": 820
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/model.glb",
      "bytes": 1018096,
      "sha256": "sha256:145a3a49c177f5d2cca084d1ff4df7d56e83c129d851d2bd6595564c93a26ea4"
    },
    "licenses": [
      {
        "path": "open-assets/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22/LICENSES/ASSET-NOTICES/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22.txt",
        "bytes": 820,
        "sha256": "sha256:017c5e8d676a70aa0f5bb661d4cea925bcb4ad99aa21faf76580144345cb863e"
      }
    ],
    "source": {
      "path": "kit/models/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22.mjs",
      "bytes": 20691,
      "sha256": "sha256:373773b7a2e17fd11524955959b398e52291400d2954dfa5df229bb4771c5e39"
    },
    "ds2": {
      "path": "dsl/models/t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22.ds2",
      "bytes": 2647,
      "sha256": "sha256:859bbbe4f04ea06cbf7fb8f89bf27d61b97551e081fe8bf34d0bd922c0a7f6ab",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 60,
    "triangles": 10768,
    "maxMatrixError": 4.930380657631324e-32,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 10,
    "nodeComparisons": 600,
    "semanticFrameComparisons": 70,
    "acceptanceCases": 3,
    "acceptanceFrameComparisons": 18,
    "maxMotionMatrixError": 9.860761315262648e-32
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "t-3c2ff42f-5c36-5228-8cdd-b104fb98dc22",
    "kind": "equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "packaging-dosing/portioning",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": false,
    "parameters": [
      {
        "id": "hopper_top_radius",
        "type": "number",
        "unit": "m",
        "min": 0.17,
        "max": 0.19,
        "default": 0.18
      }
    ],
    "ports": {
      "mount": {
        "frameId": "mount",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0.7071067811865475,
            0,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "infeed": {
        "frameId": "infeed",
        "portClass": "material-flow",
        "direction": "input",
        "quaternion": [
          0,
          1,
          0,
          0
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.1,
            0.55,
            0
          ],
          "quaternion": [
            0,
            0.7071067811865476,
            -0.7071067811865475,
            0
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "outfeed": {
        "frameId": "outfeed",
        "portClass": "material-flow",
        "direction": "output",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0.12,
            0
          ],
          "quaternion": [
            0.7071067811865475,
            0,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "work": {
        "frameId": "work",
        "portClass": "process",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0.135,
            0
          ],
          "quaternion": [
            0.7071067811865475,
            0,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "cutoff_edge": {
        "frameId": "cutoff_edge",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -0.05,
            0.126,
            0
          ],
          "quaternion": [
            0,
            -0.7071067811865475,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "phase": {
        "frameId": "auger-phase",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.032,
            0.696,
            0
          ],
          "quaternion": [
            0,
            0.7071067811865475,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
