{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "s03-05-turbine-rotor-balancing-machine",
  "assetTypeId": "s03-05-turbine-rotor-balancing-machine",
  "label": "항공 엔진 로터 밸런싱 머신",
  "category": "S 항공우주",
  "description": "수평 회전축과 2열 접촉 롤러 받침, 우측 받침 슬라이드·기준 픽업과 참고 로터.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -1.425,
      -3.827021248892527e-17,
      -0.625
    ],
    "max": [
      1.399999976158142,
      1.3550000007450582,
      0.625
    ]
  },
  "size": [
    2.824999976158142,
    1.3550000007450582,
    1.25
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 87,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 0,
      "blindSocketHeads": 0,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 8,
    "warnings": [],
    "changedMeshes": 87,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 90148,
      "afterTriangles": 78724,
      "reachedTarget": true,
      "changedMeshes": 17,
      "changes": [
        {
          "meshes": [
            "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-0",
            "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-1",
            "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-2",
            "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-3",
            "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-4",
            "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-5",
            "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-6"
          ],
          "radiusM": 0.0018000000000000002,
          "dimensionsM": [
            0.12,
            0.008,
            0.004
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/roller-fork--0.065--0.09",
            "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/roller-fork--0.065-0.09",
            "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/roller-fork-0.065--0.09",
            "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/roller-fork-0.065-0.09",
            "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/roller-fork--0.065--0.09",
            "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/roller-fork--0.065-0.09",
            "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/roller-fork-0.065--0.09",
            "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/roller-fork-0.065-0.09"
          ],
          "radiusM": 0.003,
          "dimensionsM": [
            0.035,
            0.1,
            0.05
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/pedestal-column",
            "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/pedestal-column"
          ],
          "radiusM": 0.003,
          "dimensionsM": [
            0.21,
            0.35,
            0.36
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        }
      ],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/s03-05-turbine-rotor-balancing-machine.mjs",
    "sourceSha256": "sha256:ac177cd96ce31ccbcbee3d82c756cca03858f9ec17d5fdebd7bc7e354bd7e8b2",
    "deliverySha256": "sha256:e1ffdd74885cce01634bf908d76bb5e122ae6084e6b670daf470aaa7e62aeb57",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:7ec868665cecd5bfd2b2c999d901a5d452e17800347f583cfac9cc3460929fbe",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:7ec868665cecd5bfd2b2c999d901a5d452e17800347f583cfac9cc3460929fbe",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [],
  "parameterValues": {},
  "joints": [
    {
      "id": "spin",
      "label": "참고 로터 회전",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "unit": "rad",
      "min": -6.283185307179586,
      "max": 6.283185307179586,
      "initial": 0
    },
    {
      "id": "support",
      "label": "우측 받침 위치",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "unit": "m",
      "min": 0,
      "max": 0.2,
      "initial": 0
    }
  ],
  "initialState": {
    "spin": 0,
    "support": 0
  },
  "bindings": [
    {
      "id": "spin",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0.9412588032535057,
        -0.065
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -0.46666666666666673,
      "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/support-roller--0.065",
      "gltfNode": 20
    },
    {
      "id": "spin",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0.9412588032535057,
        0.065
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -0.46666666666666673,
      "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/support-roller-0.065",
      "gltfNode": 24
    },
    {
      "id": "support",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0.8,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8",
      "gltfNode": 28
    },
    {
      "id": "spin",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0.9412588032535057,
        -0.065
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -0.46666666666666673,
      "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/support-roller--0.065",
      "gltfNode": 32
    },
    {
      "id": "spin",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0.9412588032535057,
        0.065
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -0.46666666666666673,
      "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/support-roller-0.065",
      "gltfNode": 36
    },
    {
      "id": "spin",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        1.03,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "gltfNode": 41
    }
  ],
  "jointBindings": [
    {
      "id": "spin",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0.9412588032535057,
        -0.065
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -0.46666666666666673,
      "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/support-roller--0.065",
      "gltfNode": 20
    },
    {
      "id": "spin",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0.9412588032535057,
        0.065
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -0.46666666666666673,
      "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/support-roller-0.065",
      "gltfNode": 24
    },
    {
      "id": "support",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0.8,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8",
      "gltfNode": 28
    },
    {
      "id": "spin",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0.9412588032535057,
        -0.065
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -0.46666666666666673,
      "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/support-roller--0.065",
      "gltfNode": 32
    },
    {
      "id": "spin",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0.9412588032535057,
        0.065
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -0.46666666666666673,
      "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/support-roller-0.065",
      "gltfNode": 36
    },
    {
      "id": "spin",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        1.03,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "gltfNode": 41
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "right-support-datum": {
      "id": "right-support-datum",
      "node": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/s03-05-turbine-rotor-balancing-machine:right-support-datum",
      "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/s03-05-turbine-rotor-balancing-machine:right-support-datum",
      "gltfNode": 40,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0.8,
        1.03,
        0,
        1
      ],
      "position": [
        0.8,
        1.03,
        0
      ],
      "quaternion": [
        -0.7071067811865475,
        0,
        0,
        0.7071067811865476
      ]
    },
    "rotor-index": {
      "id": "rotor-index",
      "node": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/s03-05-turbine-rotor-balancing-machine:rotor-index",
      "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/s03-05-turbine-rotor-balancing-machine:rotor-index",
      "gltfNode": 100,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.27,
        0,
        1
      ],
      "position": [
        0,
        1.27,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "shaft-end": {
      "id": "shaft-end",
      "node": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/s03-05-turbine-rotor-balancing-machine:shaft-end",
      "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/s03-05-turbine-rotor-balancing-machine:shaft-end",
      "gltfNode": 101,
      "matrix": [
        2.220446049250313e-16,
        0,
        -1,
        0,
        0,
        1,
        0,
        0,
        1,
        0,
        2.220446049250313e-16,
        0,
        1.125,
        1.03,
        0,
        1
      ],
      "position": [
        1.125,
        1.03,
        0
      ],
      "quaternion": [
        0,
        0.7071067811865475,
        0,
        0.7071067811865476
      ]
    },
    "pickup-reference": {
      "id": "pickup-reference",
      "node": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/s03-05-turbine-rotor-balancing-machine:pickup-reference",
      "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/s03-05-turbine-rotor-balancing-machine:pickup-reference",
      "gltfNode": 114,
      "matrix": [
        -1,
        0,
        -1.2246467991473532e-16,
        0,
        0,
        1,
        0,
        0,
        1.2246467991473532e-16,
        0,
        -1,
        0,
        0.55,
        1.03,
        0.2,
        1
      ],
      "position": [
        0.55,
        1.03,
        0.2
      ],
      "quaternion": [
        0,
        1,
        0,
        6.123233995736766e-17
      ]
    }
  },
  "ports": {
    "mount": "base",
    "shaft": "shaft-end",
    "support": "right-support-datum",
    "pickup": "pickup-reference"
  },
  "nodes": [
    {
      "id": "s03-05-turbine-rotor-balancing-machine",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 87,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 0,
            "blindSocketHeads": 0,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 8,
          "warnings": [],
          "changedMeshes": 87,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 90148,
            "afterTriangles": 78724,
            "reachedTarget": true,
            "changedMeshes": 17,
            "changes": [
              {
                "meshes": [
                  "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-0",
                  "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-1",
                  "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-2",
                  "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-3",
                  "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-4",
                  "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-5",
                  "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-6"
                ],
                "radiusM": 0.0018000000000000002,
                "dimensionsM": [
                  0.12,
                  0.008,
                  0.004
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/roller-fork--0.065--0.09",
                  "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/roller-fork--0.065-0.09",
                  "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/roller-fork-0.065--0.09",
                  "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/roller-fork-0.065-0.09",
                  "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/roller-fork--0.065--0.09",
                  "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/roller-fork--0.065-0.09",
                  "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/roller-fork-0.065--0.09",
                  "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/roller-fork-0.065-0.09"
                ],
                "radiusM": 0.003,
                "dimensionsM": [
                  0.035,
                  0.1,
                  0.05
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/pedestal-column",
                  "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/pedestal-column"
                ],
                "radiusM": 0.003,
                "dimensionsM": [
                  0.21,
                  0.35,
                  0.36
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              }
            ],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "s03-05-turbine-rotor-balancing-machine",
          "label": "항공 엔진 로터 밸런싱 머신",
          "coordinate_profile": "lib3d-world/1",
          "category": "항공우주 조립·검사 설비",
          "summary": "수평 회전축과 2열 접촉 롤러 받침, 우측 받침 슬라이드·기준 픽업과 참고 로터.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [],
          "joints": [
            {
              "id": "spin",
              "label": "참고 로터 회전",
              "kind": "revolute",
              "axis": [
                1,
                0,
                0
              ],
              "unit": "rad",
              "min": -6.283185307179586,
              "max": 6.283185307179586,
              "initial": 0
            },
            {
              "id": "support",
              "label": "우측 받침 위치",
              "kind": "prismatic",
              "axis": [
                1,
                0,
                0
              ],
              "unit": "m",
              "min": 0,
              "max": 0.2,
              "initial": 0
            }
          ],
          "ports": {
            "mount": "base",
            "shaft": "shaft-end",
            "support": "right-support-datum",
            "pickup": "pickup-reference"
          },
          "port_semantics": {
            "rotor-index": {
              "meaning": "참고 로터 원주 기준",
              "formula": "(0,1.03+.24cos(spin),.24sin(spin))",
              "outward_normal_parent": null
            },
            "shaft-end": {
              "meaning": "참고 축 우측 단면",
              "formula": "(1.125,1.03,0)",
              "outward_normal_parent": [
                1,
                0,
                0
              ]
            },
            "right-support-datum": {
              "meaning": "우측 받침 축 기준",
              "formula": "(.8+support,1.03,0)",
              "outward_normal_parent": [
                0,
                1,
                0
              ]
            },
            "pickup-reference": {
              "meaning": "비접촉 픽업 표시 면",
              "formula": "(.55,1.03,.20)",
              "outward_normal_parent": [
                0,
                0,
                -1
              ]
            }
          },
          "required_host_features": [
            "prismatic",
            "revolute"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "전체 치수·기구비례·기능 포트는 자체 설계이며 제조사 CAD 또는 가공·생산 성능을 뜻하지 않는다."
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {},
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
          "right-support-datum": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/s03-05-turbine-rotor-balancing-machine:right-support-datum",
          "rotor-index": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/s03-05-turbine-rotor-balancing-machine:rotor-index",
          "shaft-end": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/s03-05-turbine-rotor-balancing-machine:shaft-end",
          "pickup-reference": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/s03-05-turbine-rotor-balancing-machine:pickup-reference"
        },
        "jointBindings": [
          {
            "id": "spin",
            "kind": "revolute",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              0,
              0.9412588032535057,
              -0.065
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": -0.46666666666666673,
            "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/support-roller--0.065"
          },
          {
            "id": "spin",
            "kind": "revolute",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              0,
              0.9412588032535057,
              0.065
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": -0.46666666666666673,
            "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/support-roller-0.065"
          },
          {
            "id": "support",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              0.8,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8"
          },
          {
            "id": "spin",
            "kind": "revolute",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              0,
              0.9412588032535057,
              -0.065
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": -0.46666666666666673,
            "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/support-roller--0.065"
          },
          {
            "id": "spin",
            "kind": "revolute",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              0,
              0.9412588032535057,
              0.065
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": -0.46666666666666673,
            "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/support-roller-0.065"
          },
          {
            "id": "spin",
            "kind": "revolute",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              0,
              1.03,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle"
          }
        ],
        "joints": [
          {
            "id": "spin",
            "label": "참고 로터 회전",
            "kind": "revolute",
            "axis": [
              1,
              0,
              0
            ],
            "unit": "rad",
            "min": -6.283185307179586,
            "max": 6.283185307179586,
            "initial": 0,
            "value": 0
          },
          {
            "id": "support",
            "label": "우측 받침 위치",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "unit": "m",
            "min": 0,
            "max": 0.2,
            "initial": 0,
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 35
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "전체 치수·기구비례·기능 포트는 자체 설계이며 제조사 CAD 또는 가공·생산 성능을 뜻하지 않는다."
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "spin": 0,
          "support": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "parent": "s03-05-turbine-rotor-balancing-machine",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine:base"
      },
      "gltfNode": 1
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/foundation-plate",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/foundation-plate",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "machined_plate",
        "BOMqty": 1
      },
      "gltfNode": 2
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/machine-cabinet",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.17500000000000002,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/machine-cabinet",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 2.6399999999999997,
            "height": 0.28,
            "depth": 1.09,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 3
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-long-rail--0.46499999999999997",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.065,
        -0.46499999999999997,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-long-rail--0.46499999999999997",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 2.6999999999999997,
            "height": 0.06,
            "depth": 0.06,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 4
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-long-rail-0.46499999999999997",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.065,
        0.46499999999999997,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-long-rail-0.46499999999999997",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 2.6999999999999997,
            "height": 0.06,
            "depth": 0.06,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 5
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-0",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.7,
        0.14,
        0.548,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-0",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.008,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 6
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-1",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.7,
        0.163,
        0.548,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-1",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.008,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 7
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-2",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.7,
        0.186,
        0.548,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-2",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.008,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 8
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-3",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.7,
        0.20900000000000002,
        0.548,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-3",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.008,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 9
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-4",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.7,
        0.232,
        0.548,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-4",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.008,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 10
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-5",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.7,
        0.255,
        0.548,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-5",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.008,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 11
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-6",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.7,
        0.278,
        0.548,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/cabinet-vent-6",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.008,
            "depth": 0.004,
            "radius": 0.0018000000000000002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 12
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/precision-bed",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.35,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/precision-bed",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 2.54,
            "height": 0.09,
            "depth": 1.02,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 13
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/support-way--0.29",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.42,
        -0.29,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/support-way--0.29",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 2.35,
            "height": 0.05,
            "depth": 0.06,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 14
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/support-way-0.29",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.42,
        0.29,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/support-way-0.29",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 2.35,
            "height": 0.05,
            "depth": 0.06,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 15
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.8,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "bearing-pedestal--0.8"
      },
      "gltfNode": 16
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/pedestal-foot",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.47,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/pedestal-foot",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.38,
            "height": 0.1,
            "depth": 0.78,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 17
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/pedestal-column",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.695,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/pedestal-column",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.21,
            "height": 0.35,
            "depth": 0.36,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 18
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/roller-base",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.91,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/roller-base",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.32,
            "height": 0.08,
            "depth": 0.32,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 19
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/support-roller--0.065",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.9412588032535057,
        -0.065,
        1
      ],
      "sourceUserData": {
        "partId": "support-roller--0.065"
      },
      "gltfNode": 20
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/support-roller--0.065/contact-roller",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/support-roller--0.065",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/support-roller--0.065/contact-roller",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 21
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/roller-fork--0.065--0.09",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09,
        0.9162588032535057,
        -0.065,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/roller-fork--0.065--0.09",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.035,
            "height": 0.1,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 22
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/roller-fork--0.065-0.09",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.09,
        0.9162588032535057,
        -0.065,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/roller-fork--0.065-0.09",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.035,
            "height": 0.1,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 23
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/support-roller-0.065",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.9412588032535057,
        0.065,
        1
      ],
      "sourceUserData": {
        "partId": "support-roller-0.065"
      },
      "gltfNode": 24
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/support-roller-0.065/contact-roller",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/support-roller-0.065",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/support-roller-0.065/contact-roller",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 25
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/roller-fork-0.065--0.09",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09,
        0.9162588032535057,
        0.065,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/roller-fork-0.065--0.09",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.035,
            "height": 0.1,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 26
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/roller-fork-0.065-0.09",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.09,
        0.9162588032535057,
        0.065,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal--0.8/roller-fork-0.065-0.09",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.035,
            "height": 0.1,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 27
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.8,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "bearing-pedestal-0.8"
      },
      "gltfNode": 28
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/pedestal-foot",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.47,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/pedestal-foot",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.38,
            "height": 0.1,
            "depth": 0.78,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 29
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/pedestal-column",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.695,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/pedestal-column",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.21,
            "height": 0.35,
            "depth": 0.36,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 30
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/roller-base",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.91,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/roller-base",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.32,
            "height": 0.08,
            "depth": 0.32,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 31
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/support-roller--0.065",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.9412588032535057,
        -0.065,
        1
      ],
      "sourceUserData": {
        "partId": "support-roller--0.065"
      },
      "gltfNode": 32
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/support-roller--0.065/contact-roller",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/support-roller--0.065",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/support-roller--0.065/contact-roller",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 33
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/roller-fork--0.065--0.09",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09,
        0.9162588032535057,
        -0.065,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/roller-fork--0.065--0.09",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.035,
            "height": 0.1,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 34
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/roller-fork--0.065-0.09",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.09,
        0.9162588032535057,
        -0.065,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/roller-fork--0.065-0.09",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.035,
            "height": 0.1,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 35
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/support-roller-0.065",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.9412588032535057,
        0.065,
        1
      ],
      "sourceUserData": {
        "partId": "support-roller-0.065"
      },
      "gltfNode": 36
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/support-roller-0.065/contact-roller",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/support-roller-0.065",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/support-roller-0.065/contact-roller",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "shaft",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 37
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/roller-fork-0.065--0.09",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09,
        0.9162588032535057,
        0.065,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/roller-fork-0.065--0.09",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.035,
            "height": 0.1,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 38
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/roller-fork-0.065-0.09",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.09,
        0.9162588032535057,
        0.065,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/roller-fork-0.065-0.09",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.035,
            "height": 0.1,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 39
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8/s03-05-turbine-rotor-balancing-machine:right-support-datum",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/bearing-pedestal-0.8",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        1.03,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine:right-support-datum",
        "datumKind": "PROCESS_PORT",
        "outwardNormalParent": [
          0,
          1,
          0
        ],
        "outwardNormalLocal": [
          0,
          0,
          1
        ],
        "orientationStatus": "ORIGINAL_DESIGN"
      },
      "gltfNode": 40
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.03,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "rotor-spindle"
      },
      "gltfNode": 41
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-rotor-shaft",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-rotor-shaft",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1
      },
      "gltfNode": 42
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-disc--0.35",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.35,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-disc--0.35",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1
      },
      "gltfNode": 43
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-0",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.35,
        0.275,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-0",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 44
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-1",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.9396926207859084,
        0.34202014332566866,
        0,
        0,
        -0.34202014332566866,
        0.9396926207859084,
        0,
        -0.35,
        0.25841547071612486,
        0.09405553941455891,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-1",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 45
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-2",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.7660444431189781,
        0.6427876096865394,
        0,
        0,
        -0.6427876096865394,
        0.7660444431189781,
        0,
        -0.35,
        0.21066222185771896,
        0.17676659266379832,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-2",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 46
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-3",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.5000000000000001,
        0.8660254037844386,
        0,
        0,
        -0.8660254037844386,
        0.5000000000000001,
        0,
        -0.35,
        0.13750000000000004,
        0.23815698604072064,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-3",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 47
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-4",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.17364817766693053,
        0.9848077530122079,
        0,
        0,
        -0.9848077530122079,
        0.17364817766693053,
        0,
        -0.35,
        0.047753248858405865,
        0.2708221320783572,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-4",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 48
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-5",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.1736481776669303,
        0.9848077530122081,
        0,
        0,
        -0.9848077530122081,
        -0.1736481776669303,
        0,
        -0.35,
        -0.04775324885840584,
        0.2708221320783572,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-5",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 49
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-6",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.4999999999999998,
        0.8660254037844388,
        0,
        0,
        -0.8660254037844388,
        -0.4999999999999998,
        0,
        -0.35,
        -0.13749999999999996,
        0.23815698604072066,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-6",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 50
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-7",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.7660444431189777,
        0.6427876096865395,
        0,
        0,
        -0.6427876096865395,
        -0.7660444431189777,
        0,
        -0.35,
        -0.21066222185771893,
        0.17676659266379838,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-7",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 51
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-8",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.9396926207859082,
        0.3420201433256688,
        0,
        0,
        -0.3420201433256688,
        -0.9396926207859082,
        0,
        -0.35,
        -0.2584154707161248,
        0.09405553941455895,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-8",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 52
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-9",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -1,
        1.2246467991473532e-16,
        0,
        0,
        -1.2246467991473532e-16,
        -1,
        0,
        -0.35,
        -0.275,
        3.367778697655222e-17,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-9",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 53
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-10",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.9396926207859082,
        -0.34202014332566866,
        0,
        0,
        0.34202014332566866,
        -0.9396926207859082,
        0,
        -0.35,
        -0.25841547071612486,
        -0.0940555394145589,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-10",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 54
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-11",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.7660444431189781,
        -0.6427876096865389,
        0,
        0,
        0.6427876096865389,
        -0.7660444431189781,
        0,
        -0.35,
        -0.21066222185771907,
        -0.1767665926637982,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-11",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 55
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-12",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.5000000000000002,
        -0.8660254037844384,
        0,
        0,
        0.8660254037844384,
        -0.5000000000000002,
        0,
        -0.35,
        -0.13750000000000012,
        -0.2381569860407206,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-12",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 56
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-13",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.1736481776669303,
        -0.9848077530122081,
        0,
        0,
        0.9848077530122081,
        -0.1736481776669303,
        0,
        -0.35,
        -0.047753248858405845,
        -0.2708221320783572,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-13",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 57
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-14",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.17364817766692997,
        -0.9848077530122081,
        0,
        0,
        0.9848077530122081,
        0.17364817766692997,
        0,
        -0.35,
        0.04775324885840575,
        -0.27082213207835726,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-14",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 58
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-15",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.49999999999999933,
        -0.866025403784439,
        0,
        0,
        0.866025403784439,
        0.49999999999999933,
        0,
        -0.35,
        0.13749999999999982,
        -0.23815698604072075,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-15",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 59
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-16",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.7660444431189779,
        -0.6427876096865396,
        0,
        0,
        0.6427876096865396,
        0.7660444431189779,
        0,
        -0.35,
        0.2106622218577189,
        -0.1767665926637984,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-16",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 60
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-17",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.9396926207859084,
        -0.3420201433256686,
        0,
        0,
        0.3420201433256686,
        0.9396926207859084,
        0,
        -0.35,
        0.25841547071612486,
        -0.09405553941455887,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade--0.35-17",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 61
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-disc-0",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-disc-0",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1
      },
      "gltfNode": 62
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-0",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.275,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-0",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 63
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-1",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.9396926207859084,
        0.34202014332566866,
        0,
        0,
        -0.34202014332566866,
        0.9396926207859084,
        0,
        0,
        0.25841547071612486,
        0.09405553941455891,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-1",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 64
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-2",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.7660444431189781,
        0.6427876096865394,
        0,
        0,
        -0.6427876096865394,
        0.7660444431189781,
        0,
        0,
        0.21066222185771896,
        0.17676659266379832,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-2",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 65
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-3",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.5000000000000001,
        0.8660254037844386,
        0,
        0,
        -0.8660254037844386,
        0.5000000000000001,
        0,
        0,
        0.13750000000000004,
        0.23815698604072064,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-3",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 66
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-4",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.17364817766693053,
        0.9848077530122079,
        0,
        0,
        -0.9848077530122079,
        0.17364817766693053,
        0,
        0,
        0.047753248858405865,
        0.2708221320783572,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-4",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 67
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-5",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.1736481776669303,
        0.9848077530122081,
        0,
        0,
        -0.9848077530122081,
        -0.1736481776669303,
        0,
        0,
        -0.04775324885840584,
        0.2708221320783572,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-5",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 68
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-6",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.4999999999999998,
        0.8660254037844388,
        0,
        0,
        -0.8660254037844388,
        -0.4999999999999998,
        0,
        0,
        -0.13749999999999996,
        0.23815698604072066,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-6",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 69
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-7",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.7660444431189777,
        0.6427876096865395,
        0,
        0,
        -0.6427876096865395,
        -0.7660444431189777,
        0,
        0,
        -0.21066222185771893,
        0.17676659266379838,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-7",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 70
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-8",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.9396926207859082,
        0.3420201433256688,
        0,
        0,
        -0.3420201433256688,
        -0.9396926207859082,
        0,
        0,
        -0.2584154707161248,
        0.09405553941455895,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-8",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 71
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-9",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -1,
        1.2246467991473532e-16,
        0,
        0,
        -1.2246467991473532e-16,
        -1,
        0,
        0,
        -0.275,
        3.367778697655222e-17,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-9",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 72
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-10",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.9396926207859082,
        -0.34202014332566866,
        0,
        0,
        0.34202014332566866,
        -0.9396926207859082,
        0,
        0,
        -0.25841547071612486,
        -0.0940555394145589,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-10",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 73
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-11",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.7660444431189781,
        -0.6427876096865389,
        0,
        0,
        0.6427876096865389,
        -0.7660444431189781,
        0,
        0,
        -0.21066222185771907,
        -0.1767665926637982,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-11",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 74
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-12",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.5000000000000002,
        -0.8660254037844384,
        0,
        0,
        0.8660254037844384,
        -0.5000000000000002,
        0,
        0,
        -0.13750000000000012,
        -0.2381569860407206,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-12",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 75
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-13",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.1736481776669303,
        -0.9848077530122081,
        0,
        0,
        0.9848077530122081,
        -0.1736481776669303,
        0,
        0,
        -0.047753248858405845,
        -0.2708221320783572,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-13",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 76
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-14",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.17364817766692997,
        -0.9848077530122081,
        0,
        0,
        0.9848077530122081,
        0.17364817766692997,
        0,
        0,
        0.04775324885840575,
        -0.27082213207835726,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-14",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 77
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-15",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.49999999999999933,
        -0.866025403784439,
        0,
        0,
        0.866025403784439,
        0.49999999999999933,
        0,
        0,
        0.13749999999999982,
        -0.23815698604072075,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-15",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 78
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-16",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.7660444431189779,
        -0.6427876096865396,
        0,
        0,
        0.6427876096865396,
        0.7660444431189779,
        0,
        0,
        0.2106622218577189,
        -0.1767665926637984,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-16",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 79
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-17",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.9396926207859084,
        -0.3420201433256686,
        0,
        0,
        0.3420201433256686,
        0.9396926207859084,
        0,
        0,
        0.25841547071612486,
        -0.09405553941455887,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0-17",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 80
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-disc-0.35",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.35,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-disc-0.35",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1
      },
      "gltfNode": 81
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-0",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.35,
        0.275,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-0",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 82
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-1",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.9396926207859084,
        0.34202014332566866,
        0,
        0,
        -0.34202014332566866,
        0.9396926207859084,
        0,
        0.35,
        0.25841547071612486,
        0.09405553941455891,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-1",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 83
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-2",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.7660444431189781,
        0.6427876096865394,
        0,
        0,
        -0.6427876096865394,
        0.7660444431189781,
        0,
        0.35,
        0.21066222185771896,
        0.17676659266379832,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-2",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 84
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-3",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.5000000000000001,
        0.8660254037844386,
        0,
        0,
        -0.8660254037844386,
        0.5000000000000001,
        0,
        0.35,
        0.13750000000000004,
        0.23815698604072064,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-3",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 85
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-4",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.17364817766693053,
        0.9848077530122079,
        0,
        0,
        -0.9848077530122079,
        0.17364817766693053,
        0,
        0.35,
        0.047753248858405865,
        0.2708221320783572,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-4",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 86
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-5",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.1736481776669303,
        0.9848077530122081,
        0,
        0,
        -0.9848077530122081,
        -0.1736481776669303,
        0,
        0.35,
        -0.04775324885840584,
        0.2708221320783572,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-5",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 87
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-6",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.4999999999999998,
        0.8660254037844388,
        0,
        0,
        -0.8660254037844388,
        -0.4999999999999998,
        0,
        0.35,
        -0.13749999999999996,
        0.23815698604072066,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-6",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 88
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-7",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.7660444431189777,
        0.6427876096865395,
        0,
        0,
        -0.6427876096865395,
        -0.7660444431189777,
        0,
        0.35,
        -0.21066222185771893,
        0.17676659266379838,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-7",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 89
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-8",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.9396926207859082,
        0.3420201433256688,
        0,
        0,
        -0.3420201433256688,
        -0.9396926207859082,
        0,
        0.35,
        -0.2584154707161248,
        0.09405553941455895,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-8",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 90
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-9",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -1,
        1.2246467991473532e-16,
        0,
        0,
        -1.2246467991473532e-16,
        -1,
        0,
        0.35,
        -0.275,
        3.367778697655222e-17,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-9",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 91
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-10",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.9396926207859082,
        -0.34202014332566866,
        0,
        0,
        0.34202014332566866,
        -0.9396926207859082,
        0,
        0.35,
        -0.25841547071612486,
        -0.0940555394145589,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-10",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 92
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-11",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.7660444431189781,
        -0.6427876096865389,
        0,
        0,
        0.6427876096865389,
        -0.7660444431189781,
        0,
        0.35,
        -0.21066222185771907,
        -0.1767665926637982,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-11",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 93
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-12",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.5000000000000002,
        -0.8660254037844384,
        0,
        0,
        0.8660254037844384,
        -0.5000000000000002,
        0,
        0.35,
        -0.13750000000000012,
        -0.2381569860407206,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-12",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 94
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-13",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -0.1736481776669303,
        -0.9848077530122081,
        0,
        0,
        0.9848077530122081,
        -0.1736481776669303,
        0,
        0.35,
        -0.047753248858405845,
        -0.2708221320783572,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-13",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 95
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-14",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.17364817766692997,
        -0.9848077530122081,
        0,
        0,
        0.9848077530122081,
        0.17364817766692997,
        0,
        0.35,
        0.04775324885840575,
        -0.27082213207835726,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-14",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 96
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-15",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.49999999999999933,
        -0.866025403784439,
        0,
        0,
        0.866025403784439,
        0.49999999999999933,
        0,
        0.35,
        0.13749999999999982,
        -0.23815698604072075,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-15",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 97
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-16",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.7660444431189779,
        -0.6427876096865396,
        0,
        0,
        0.6427876096865396,
        0.7660444431189779,
        0,
        0.35,
        0.2106622218577189,
        -0.1767665926637984,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-16",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 98
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-17",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.9396926207859084,
        -0.3420201433256686,
        0,
        0,
        0.3420201433256686,
        0.9396926207859084,
        0,
        0.35,
        0.25841547071612486,
        -0.09405553941455887,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/preview-blade-0.35-17",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.1,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 99
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/s03-05-turbine-rotor-balancing-machine:rotor-index",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.24,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine:rotor-index"
      },
      "gltfNode": 100
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle/s03-05-turbine-rotor-balancing-machine:shaft-end",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/rotor-spindle",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        -1,
        0,
        0,
        1,
        0,
        0,
        1,
        0,
        2.220446049250313e-16,
        0,
        1.125,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine:shaft-end",
        "datumKind": "PROCESS_PORT",
        "outwardNormalParent": [
          1,
          0,
          0
        ],
        "outwardNormalLocal": [
          0,
          0,
          1
        ],
        "orientationStatus": "ORIGINAL_DESIGN"
      },
      "gltfNode": 101
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/drive-motor",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3,
        1.03,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "drive-motor",
        "componentRole": "motor",
        "BOMqty": 1
      },
      "gltfNode": 102
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/drive-motor/motor-can",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/drive-motor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/drive-motor/motor-can",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 103
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/drive-motor/shaft-coupling",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/drive-motor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.128,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/drive-motor/shaft-coupling",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 104
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/drive-motor/terminal-box",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/drive-motor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.095,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/drive-motor/terminal-box",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.035,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 105
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/drive-motor/motor-fin-0",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/drive-motor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.066,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/drive-motor/motor-fin-0",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 106
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/drive-motor/motor-fin-1",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/drive-motor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.022,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/drive-motor/motor-fin-1",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 107
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/drive-motor/motor-fin-2",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/drive-motor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.022000000000000006,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/drive-motor/motor-fin-2",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 108
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/drive-motor/motor-fin-3",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/drive-motor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.066,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/drive-motor/motor-fin-3",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 109
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/motor-support",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3,
        0.67,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/motor-support",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.25,
            "height": 0.55,
            "depth": 0.25,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 110
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/pickup-stand",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.55,
        0.71,
        0.4,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/pickup-stand",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.63,
            "depth": 0.1,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 111
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/pickup-body",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.55,
        1.03,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/pickup-body",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 112
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/pickup-bore",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.55,
        1.03,
        0.225,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/pickup-bore",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "hollow_functional_part",
        "BOMqty": 1
      },
      "gltfNode": 113
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/s03-05-turbine-rotor-balancing-machine:pickup-reference",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        -1,
        0,
        -1.2246467991473532e-16,
        0,
        0,
        1,
        0,
        0,
        1.2246467991473532e-16,
        0,
        -1,
        0,
        0.55,
        1.03,
        0.2,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine:pickup-reference",
        "datumKind": "PROCESS_PORT",
        "outwardNormalParent": [
          0,
          0,
          -1
        ],
        "outwardNormalLocal": [
          0,
          0,
          1
        ],
        "orientationStatus": "ORIGINAL_DESIGN"
      },
      "gltfNode": 114
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/control-console",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.12,
        0.605,
        0.42,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/control-console",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.35,
            "height": 0.42,
            "depth": 0.18,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 115
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/control-display",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.12,
        0.69,
        0.517,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/control-display",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.25,
            "height": 0.17,
            "depth": 0.012,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 116
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/nameplate-backing",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.19,
        0.558,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/nameplate-backing",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.36,
            "height": 0.13,
            "depth": 0.012,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 117
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.19,
        0.58,
        1
      ],
      "sourceUserData": {
        "partId": "DS_Brand_Plate",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 118
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate/badge-bezel",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate/badge-bezel",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 119
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate/badge-backing",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate/badge-backing",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 120
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate/badge-rivet-0",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.13515,
        -0.030149999999999996,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate/badge-rivet-0",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 121
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate/badge-rivet-1",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.13515,
        0.030149999999999996,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate/badge-rivet-1",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 122
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate/badge-rivet-2",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.13515,
        -0.030149999999999996,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate/badge-rivet-2",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 123
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate/badge-rivet-3",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.13515,
        0.030149999999999996,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate/badge-rivet-3",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 124
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate/badge-D",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.052199999999999996,
        0,
        0,
        0,
        0,
        0.052199999999999996,
        0,
        0,
        0,
        0,
        0.007308,
        0,
        -0.022968,
        0,
        0.011903799999999999,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate/badge-D",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 125
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate/badge-S",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.052199999999999996,
        0,
        0,
        0,
        0,
        0.052199999999999996,
        0,
        0,
        0,
        0,
        0.007308,
        0,
        0.022968,
        0,
        0.011903799999999999,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate/badge-S",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 126
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate/badge-D-back",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.052199999999999996,
        0,
        -6.392656291549183e-18,
        0,
        0,
        0.052199999999999996,
        0,
        0,
        8.949718808168857e-19,
        0,
        -0.007308,
        0,
        0.022968,
        0,
        -0.011903799999999999,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate/badge-D-back",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 127
    },
    {
      "id": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate/badge-S-back",
      "parent": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.052199999999999996,
        0,
        -6.392656291549183e-18,
        0,
        0,
        0.052199999999999996,
        0,
        0,
        8.949718808168857e-19,
        0,
        -0.007308,
        0,
        -0.022968,
        0,
        -0.011903799999999999,
        1
      ],
      "sourceUserData": {
        "partId": "s03-05-turbine-rotor-balancing-machine/s03-05-turbine-rotor-balancing-machine:base/DS_Brand_Plate/badge-S-back",
        "assetId": "s03-05-turbine-rotor-balancing-machine",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 128
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "전체 치수·기구비례·기능 포트는 자체 설계이며 제조사 CAD 또는 가공·생산 성능을 뜻하지 않는다."
    }
  ],
  "rights": {
    "id": "s03-05-turbine-rotor-balancing-machine",
    "assetTypeId": "s03-05-turbine-rotor-balancing-machine",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:ac177cd96ce31ccbcbee3d82c756cca03858f9ec17d5fdebd7bc7e354bd7e8b2",
    "modelSource": "kit/models/s03-05-turbine-rotor-balancing-machine.mjs",
    "dslExampleSource": "dsl/models/s03-05-turbine-rotor-balancing-machine.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/s03-05-turbine-rotor-balancing-machine.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/s03-05-turbine-rotor-balancing-machine.txt",
      "sha256": "sha256:2bdd0f14ebeb9f1d048197dcdbb5ce70e10243c04e08a12848495f5f977f2f70",
      "bytes": 820
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/s03-05-turbine-rotor-balancing-machine/model.glb",
      "bytes": 867460,
      "sha256": "sha256:ee6dd797ca15189a5871cc9a157f288533f42c853bf9b8b547d99c72fbf3f7a5"
    },
    "licenses": [
      {
        "path": "open-assets/s03-05-turbine-rotor-balancing-machine/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/s03-05-turbine-rotor-balancing-machine/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/s03-05-turbine-rotor-balancing-machine/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/s03-05-turbine-rotor-balancing-machine/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/s03-05-turbine-rotor-balancing-machine/LICENSES/ASSET-NOTICES/s03-05-turbine-rotor-balancing-machine.txt",
        "bytes": 820,
        "sha256": "sha256:2bdd0f14ebeb9f1d048197dcdbb5ce70e10243c04e08a12848495f5f977f2f70"
      }
    ],
    "source": {
      "path": "kit/models/s03-05-turbine-rotor-balancing-machine.mjs",
      "bytes": 17558,
      "sha256": "sha256:e1ffdd74885cce01634bf908d76bb5e122ae6084e6b670daf470aaa7e62aeb57"
    },
    "ds2": {
      "path": "dsl/models/s03-05-turbine-rotor-balancing-machine.ds2",
      "bytes": 2706,
      "sha256": "sha256:93fbac932d750bd6e13e8500938b7cb20da25c709811c5db2e13d524a9868de4",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 129,
    "triangles": 78724,
    "maxMatrixError": 3.3306690738754696e-16,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 14,
    "nodeComparisons": 1806,
    "semanticFrameComparisons": 70,
    "acceptanceCases": 7,
    "acceptanceFrameComparisons": 28,
    "maxMotionMatrixError": 3.3306690738754696e-16
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "s03-05-turbine-rotor-balancing-machine",
    "kind": "process-equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "항공우주 조립·검사 설비",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "shaft": {
        "frameId": "shaft-end",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            1.125,
            1.03,
            0
          ],
          "quaternion": [
            0,
            0.7071067811865475,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "support": {
        "frameId": "right-support-datum",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.8,
            1.03,
            0
          ],
          "quaternion": [
            -0.7071067811865475,
            0,
            0,
            0.7071067811865476
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "pickup": {
        "frameId": "pickup-reference",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.55,
            1.03,
            0.2
          ],
          "quaternion": [
            0,
            1,
            0,
            6.123233995736766e-17
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
