{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "s02-03-prepreg-ply-cutter-table",
  "assetTypeId": "s02-03-prepreg-ply-cutter-table",
  "label": "프리프레그 자동 재단기(플라이 커터)",
  "category": "S 항공우주",
  "description": "실제 다공 흡착 베드, X 브리지·Z 캐리지, 수직 칼날 승강과 접선 방향 회전, 원단 공급 롤과 진공 접속부를 구분한 자체 설계 재단 테이블.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -3.11,
      0.01500000044703484,
      -1.2500000005960465
    ],
    "max": [
      2.4000000953674316,
      1.5399999982118606,
      1.1899999952316285
    ]
  },
  "size": [
    5.510000095367431,
    1.5249999977648259,
    2.439999995827675
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 0,
      "explicitBoxFillets": 24,
      "chamferedCylinders": 0,
      "blindSocketHeads": 0,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 2,
    "warnings": [],
    "changedMeshes": 24,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 43412,
      "afterTriangles": 43412,
      "reachedTarget": true,
      "changedMeshes": 0,
      "changes": [],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/s02-03-prepreg-ply-cutter-table.mjs",
    "sourceSha256": "sha256:5d1d4a59d418a5d556adc71b20588edeef1e45199ead9b4c9fb73437a393e9b7",
    "deliverySha256": "sha256:fb5e3c4a87740a9c7fb92cb0300af4ac5d928476eff3051d1bf610aa849b9640",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:d698a5c938546f03675b353ca4625cc8f16fa46accbc67476df9cd419cd4b42a",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:d698a5c938546f03675b353ca4625cc8f16fa46accbc67476df9cd419cd4b42a",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [],
  "parameterValues": {},
  "joints": [
    {
      "id": "travel_x",
      "label": "재단 브리지 X",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "unit": "m",
      "min": -1.8,
      "max": 1.8,
      "initial": 0
    },
    {
      "id": "travel_z",
      "label": "재단 헤드 Z",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "unit": "m",
      "min": -0.65,
      "max": 0.65,
      "initial": 0
    },
    {
      "id": "plunge",
      "label": "칼날 하강",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "unit": "m",
      "min": 0,
      "max": 0.034,
      "initial": 0
    },
    {
      "id": "yaw",
      "label": "칼날 접선 방향",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "unit": "rad",
      "min": -3.141592653589793,
      "max": 3.141592653589793,
      "initial": 0
    }
  ],
  "initialState": {
    "travel_x": 0,
    "travel_z": 0,
    "plunge": 0,
    "yaw": 0
  },
  "bindings": [
    {
      "id": "travel_x",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge",
      "gltfNode": 26
    },
    {
      "id": "travel_z",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head",
      "gltfNode": 33
    },
    {
      "id": "plunge",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift",
      "gltfNode": 36
    },
    {
      "id": "yaw",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        1.1,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift/tangent-head",
      "gltfNode": 39
    }
  ],
  "jointBindings": [
    {
      "id": "travel_x",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge",
      "gltfNode": 26
    },
    {
      "id": "travel_z",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head",
      "gltfNode": 33
    },
    {
      "id": "plunge",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift",
      "gltfNode": 36
    },
    {
      "id": "yaw",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        1.1,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift/tangent-head",
      "gltfNode": 39
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "nodeName": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "knife-tip-port": {
      "id": "knife-tip-port",
      "node": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift/tangent-head/s02-03-prepreg-ply-cutter-table:knife-tip-port",
      "nodeName": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift/tangent-head/s02-03-prepreg-ply-cutter-table:knife-tip-port",
      "gltfNode": 43,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        -2.220446049250313e-16,
        1.0000000000000002,
        0,
        0,
        -1.0000000000000002,
        -2.220446049250313e-16,
        0,
        -0.025,
        0.915,
        0,
        1
      ],
      "position": [
        -0.025,
        0.915,
        0
      ],
      "quaternion": [
        0.7071067811865476,
        0,
        0,
        0.7071067811865475
      ]
    },
    "vacuum-port": {
      "id": "vacuum-port",
      "node": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/s02-03-prepreg-ply-cutter-table:vacuum-port",
      "nodeName": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/s02-03-prepreg-ply-cutter-table:vacuum-port",
      "gltfNode": 53,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.75,
        -1.25,
        1
      ],
      "position": [
        0,
        0.75,
        -1.25
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "bed-seat-port": {
      "id": "bed-seat-port",
      "node": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/s02-03-prepreg-ply-cutter-table:bed-seat-port",
      "nodeName": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/s02-03-prepreg-ply-cutter-table:bed-seat-port",
      "gltfNode": 54,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        -2.220446049250313e-16,
        1.0000000000000002,
        0,
        0,
        -1.0000000000000002,
        -2.220446049250313e-16,
        0,
        0,
        0.875,
        0,
        1
      ],
      "position": [
        0,
        0.875,
        0
      ],
      "quaternion": [
        0.7071067811865476,
        0,
        0,
        0.7071067811865475
      ]
    },
    "fabric-entry-port": {
      "id": "fabric-entry-port",
      "node": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/s02-03-prepreg-ply-cutter-table:fabric-entry-port",
      "nodeName": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/s02-03-prepreg-ply-cutter-table:fabric-entry-port",
      "gltfNode": 55,
      "matrix": [
        -2.220446049250313e-16,
        0,
        -1.0000000000000002,
        0,
        0,
        1,
        0,
        0,
        1.0000000000000002,
        0,
        -2.220446049250313e-16,
        0,
        -2.4,
        0.875,
        0,
        1
      ],
      "position": [
        -2.4,
        0.875,
        0
      ],
      "quaternion": [
        0,
        0.7071067811865476,
        0,
        0.7071067811865475
      ]
    }
  },
  "ports": {
    "mount": "base",
    "work": "knife-tip-port",
    "vacuum": "vacuum-port",
    "bed": "bed-seat-port",
    "inlet": "fabric-entry-port"
  },
  "nodes": [
    {
      "id": "s02-03-prepreg-ply-cutter-table",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 0,
            "explicitBoxFillets": 24,
            "chamferedCylinders": 0,
            "blindSocketHeads": 0,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 2,
          "warnings": [],
          "changedMeshes": 24,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 43412,
            "afterTriangles": 43412,
            "reachedTarget": true,
            "changedMeshes": 0,
            "changes": [],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "s02-03-prepreg-ply-cutter-table",
          "coordinate_profile": "lib3d-world/1",
          "label": "프리프레그 자동 플라이 재단기",
          "category": "S 항공우주 / S02 복합재 성형",
          "summary": "실제 다공 흡착 베드, X 브리지·Z 캐리지, 수직 칼날 승강과 접선 방향 회전, 원단 공급 롤과 진공 접속부를 구분한 자체 설계 재단 테이블.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [],
          "joints": [
            {
              "id": "travel_x",
              "label": "재단 브리지 X",
              "kind": "prismatic",
              "axis": [
                1,
                0,
                0
              ],
              "unit": "m",
              "min": -1.8,
              "max": 1.8,
              "initial": 0
            },
            {
              "id": "travel_z",
              "label": "재단 헤드 Z",
              "kind": "prismatic",
              "axis": [
                0,
                0,
                1
              ],
              "unit": "m",
              "min": -0.65,
              "max": 0.65,
              "initial": 0
            },
            {
              "id": "plunge",
              "label": "칼날 하강",
              "kind": "prismatic",
              "axis": [
                0,
                -1,
                0
              ],
              "unit": "m",
              "min": 0,
              "max": 0.034,
              "initial": 0
            },
            {
              "id": "yaw",
              "label": "칼날 접선 방향",
              "kind": "revolute",
              "axis": [
                0,
                1,
                0
              ],
              "unit": "rad",
              "min": -3.141592653589793,
              "max": 3.141592653589793,
              "initial": 0
            }
          ],
          "ports": {
            "mount": "base",
            "work": "knife-tip-port",
            "vacuum": "vacuum-port",
            "bed": "bed-seat-port",
            "inlet": "fabric-entry-port"
          },
          "required_host_features": [
            "prismatic",
            "revolute"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "배정 패킷의 기능 범위에 따른 자체 형상·치수. 외부 CAD/제품사진/제조사 정격을 사용하지 않음."
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {},
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
          "knife-tip-port": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift/tangent-head/s02-03-prepreg-ply-cutter-table:knife-tip-port",
          "vacuum-port": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/s02-03-prepreg-ply-cutter-table:vacuum-port",
          "bed-seat-port": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/s02-03-prepreg-ply-cutter-table:bed-seat-port",
          "fabric-entry-port": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/s02-03-prepreg-ply-cutter-table:fabric-entry-port"
        },
        "jointBindings": [
          {
            "id": "travel_x",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge"
          },
          {
            "id": "travel_z",
            "kind": "prismatic",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head"
          },
          {
            "id": "plunge",
            "kind": "prismatic",
            "axis": [
              0,
              -1,
              0
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift"
          },
          {
            "id": "yaw",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              1.1,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift/tangent-head"
          }
        ],
        "joints": [
          {
            "id": "travel_x",
            "label": "재단 브리지 X",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "unit": "m",
            "min": -1.8,
            "max": 1.8,
            "initial": 0,
            "value": 0
          },
          {
            "id": "travel_z",
            "label": "재단 헤드 Z",
            "kind": "prismatic",
            "axis": [
              0,
              0,
              1
            ],
            "unit": "m",
            "min": -0.65,
            "max": 0.65,
            "initial": 0,
            "value": 0
          },
          {
            "id": "plunge",
            "label": "칼날 하강",
            "kind": "prismatic",
            "axis": [
              0,
              -1,
              0
            ],
            "unit": "m",
            "min": 0,
            "max": 0.034,
            "initial": 0,
            "value": 0
          },
          {
            "id": "yaw",
            "label": "칼날 접선 방향",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "unit": "rad",
            "min": -3.141592653589793,
            "max": 3.141592653589793,
            "initial": 0,
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 37
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "배정 패킷의 기능 범위에 따른 자체 형상·치수. 외부 CAD/제품사진/제조사 정격을 사용하지 않음."
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "travel_x": 0,
          "travel_z": 0,
          "plunge": 0,
          "yaw": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "parent": "s02-03-prepreg-ply-cutter-table",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table:base"
      },
      "gltfNode": 1
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-foot--2--0.8",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2,
        0.035,
        -0.8,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-foot--2--0.8",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "mounting_plate",
        "BOMqty": 1
      },
      "gltfNode": 2
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-leg--2--0.8",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2,
        0.4,
        -0.8,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-leg--2--0.8",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.7,
            "depth": 0.09,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 3
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-foot--2-0.8",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2,
        0.035,
        0.8,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-foot--2-0.8",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "mounting_plate",
        "BOMqty": 1
      },
      "gltfNode": 4
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-leg--2-0.8",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2,
        0.4,
        0.8,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-leg--2-0.8",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.7,
            "depth": 0.09,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 5
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-foot-0--0.8",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.035,
        -0.8,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-foot-0--0.8",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "mounting_plate",
        "BOMqty": 1
      },
      "gltfNode": 6
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-leg-0--0.8",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.4,
        -0.8,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-leg-0--0.8",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.7,
            "depth": 0.09,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 7
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-foot-0-0.8",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.035,
        0.8,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-foot-0-0.8",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "mounting_plate",
        "BOMqty": 1
      },
      "gltfNode": 8
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-leg-0-0.8",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.4,
        0.8,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-leg-0-0.8",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.7,
            "depth": 0.09,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 9
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-foot-2--0.8",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2,
        0.035,
        -0.8,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-foot-2--0.8",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "mounting_plate",
        "BOMqty": 1
      },
      "gltfNode": 10
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-leg-2--0.8",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2,
        0.4,
        -0.8,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-leg-2--0.8",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.7,
            "depth": 0.09,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 11
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-foot-2-0.8",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2,
        0.035,
        0.8,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-foot-2-0.8",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "mounting_plate",
        "BOMqty": 1
      },
      "gltfNode": 12
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-leg-2-0.8",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2,
        0.4,
        0.8,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/table-leg-2-0.8",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.7,
            "depth": 0.09,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 13
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/vacuum-plenum",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.77,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/vacuum-plenum",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 4.8,
            "height": 0.17,
            "depth": 2,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 14
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/perforated-bed",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.865,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/perforated-bed",
        "assetId": "s02-03-prepreg-ply-cutter-table"
      },
      "gltfNode": 15
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/rail-outrigger--2.2--1.06",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.2,
        0.86,
        -1.06,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/rail-outrigger--2.2--1.06",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.1,
            "depth": 0.26,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 16
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/rail-standoff--2.2--1.06",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.2,
        0.96,
        -1.06,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/rail-standoff--2.2--1.06",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.08,
            "height": 0.2,
            "depth": 0.08,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 17
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/rail-outrigger--2.2-1.06",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.2,
        0.86,
        1.06,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/rail-outrigger--2.2-1.06",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.1,
            "depth": 0.26,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 18
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/rail-standoff--2.2-1.06",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.2,
        0.96,
        1.06,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/rail-standoff--2.2-1.06",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.08,
            "height": 0.2,
            "depth": 0.08,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 19
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/rail-outrigger-2.2--1.06",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.2,
        0.86,
        -1.06,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/rail-outrigger-2.2--1.06",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.1,
            "depth": 0.26,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 20
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/rail-standoff-2.2--1.06",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.2,
        0.96,
        -1.06,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/rail-standoff-2.2--1.06",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.08,
            "height": 0.2,
            "depth": 0.08,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 21
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/rail-outrigger-2.2-1.06",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.2,
        0.86,
        1.06,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/rail-outrigger-2.2-1.06",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.1,
            "depth": 0.26,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 22
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/rail-standoff-2.2-1.06",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.2,
        0.96,
        1.06,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/rail-standoff-2.2-1.06",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.08,
            "height": 0.2,
            "depth": 0.08,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 23
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-guide--1.06",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.07,
        -1.06,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-guide--1.06",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 4.8,
            "height": 0.055,
            "depth": 0.06,
            "radius": 0.0013750000000000001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 24
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-guide-1.06",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.07,
        1.06,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-guide-1.06",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 4.8,
            "height": 0.055,
            "depth": 0.06,
            "radius": 0.0013750000000000001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 25
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "X-bridge"
      },
      "gltfNode": 26
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/X-bearing--1.06",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.07,
        -1.06,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/X-bearing--1.06",
        "assetId": "s02-03-prepreg-ply-cutter-table"
      },
      "gltfNode": 27
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/bridge-leg--1.06",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.25,
        -1.06,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/bridge-leg--1.06",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.33,
            "depth": 0.14,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 28
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/X-bearing-1.06",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.07,
        1.06,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/X-bearing-1.06",
        "assetId": "s02-03-prepreg-ply-cutter-table"
      },
      "gltfNode": 29
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/bridge-leg-1.06",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.25,
        1.06,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/bridge-leg-1.06",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.33,
            "depth": 0.14,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 30
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/bridge-beam",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.46,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/bridge-beam",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.2,
            "height": 0.16,
            "depth": 2.3,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 31
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-guide",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.1,
        1.365,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-guide",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.065,
            "height": 0.05,
            "depth": 2.08,
            "radius": 0.0012500000000000002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 32
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "Z-head"
      },
      "gltfNode": 33
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/Z-bearing",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.1,
        1.365,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/Z-bearing",
        "assetId": "s02-03-prepreg-ply-cutter-table"
      },
      "gltfNode": 34
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/vertical-slide",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.13,
        1.15,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/vertical-slide",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.32,
            "depth": 0.1,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 35
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "knife-lift"
      },
      "gltfNode": 36
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift/vertical-bearing",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.13,
        1.16,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift/vertical-bearing",
        "assetId": "s02-03-prepreg-ply-cutter-table"
      },
      "gltfNode": 37
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift/spindle-arm",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.055,
        1.16,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift/spindle-arm",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.1,
            "depth": 0.18,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 38
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift/tangent-head",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.1,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "tangent-head"
      },
      "gltfNode": 39
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift/tangent-head/tangent-spindle",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift/tangent-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift/tangent-head/tangent-spindle",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 40
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift/tangent-head/knife-holder",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift/tangent-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.1,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift/tangent-head/knife-holder",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.06,
            "height": 0.1,
            "depth": 0.06,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 41
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift/tangent-head/knife-blade",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift/tangent-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.135,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift/tangent-head/knife-blade",
        "assetId": "s02-03-prepreg-ply-cutter-table"
      },
      "gltfNode": 42
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift/tangent-head/s02-03-prepreg-ply-cutter-table:knife-tip-port",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/X-bridge/Z-head/knife-lift/tangent-head",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -2.220446049250313e-16,
        1.0000000000000002,
        0,
        0,
        -1.0000000000000002,
        -2.220446049250313e-16,
        0,
        -0.025,
        -0.185,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table:knife-tip-port"
      },
      "gltfNode": 43
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/roll-foot--0.8",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.86,
        0.035,
        -0.8,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/roll-foot--0.8",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "mounting_plate",
        "BOMqty": 1
      },
      "gltfNode": 44
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/roll-stand--0.8",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.86,
        0.66,
        -0.8,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/roll-stand--0.8",
        "assetId": "s02-03-prepreg-ply-cutter-table"
      },
      "gltfNode": 45
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/roll-foot-0.8",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.86,
        0.035,
        0.8,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/roll-foot-0.8",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "mounting_plate",
        "BOMqty": 1
      },
      "gltfNode": 46
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/roll-stand-0.8",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.86,
        0.66,
        0.8,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/roll-stand-0.8",
        "assetId": "s02-03-prepreg-ply-cutter-table"
      },
      "gltfNode": 47
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/supply-axle",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -2.86,
        1.15,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/supply-axle",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 48
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/preview-prepreg",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "preview-prepreg",
        "componentRole": "preview_workpiece",
        "previewOnly": true
      },
      "gltfNode": 49
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/preview-prepreg/supply-roll",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/preview-prepreg",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -2.86,
        1.15,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/preview-prepreg/supply-roll",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "previewOnly": true
      },
      "gltfNode": 50
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/preview-prepreg/cut-ply-example",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/preview-prepreg",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.879,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/preview-prepreg/cut-ply-example",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "preview_workpiece",
        "previewOnly": true
      },
      "gltfNode": 51
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/vacuum-connector",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.75,
        -1.11,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/vacuum-connector",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "hollow_port",
        "BOMqty": 1
      },
      "gltfNode": 52
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/s02-03-prepreg-ply-cutter-table:vacuum-port",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.75,
        -1.25,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table:vacuum-port"
      },
      "gltfNode": 53
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/s02-03-prepreg-ply-cutter-table:bed-seat-port",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -2.220446049250313e-16,
        1.0000000000000002,
        0,
        0,
        -1.0000000000000002,
        -2.220446049250313e-16,
        0,
        0,
        0.875,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table:bed-seat-port"
      },
      "gltfNode": 54
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/s02-03-prepreg-ply-cutter-table:fabric-entry-port",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        -2.220446049250313e-16,
        0,
        -1.0000000000000002,
        0,
        0,
        1,
        0,
        0,
        1.0000000000000002,
        0,
        -2.220446049250313e-16,
        0,
        -2.4,
        0.875,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table:fabric-entry-port"
      },
      "gltfNode": 55
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.77,
        1.01,
        1
      ],
      "sourceUserData": {
        "partId": "DS_Brand_Plate",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 56
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate/badge-bezel",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate/badge-bezel",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 57
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate/badge-backing",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate/badge-backing",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 58
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate/badge-rivet-0",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.32854999999999995,
        -0.043550000000000005,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate/badge-rivet-0",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 59
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate/badge-rivet-1",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.32854999999999995,
        0.043550000000000005,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate/badge-rivet-1",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 60
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate/badge-rivet-2",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.32854999999999995,
        -0.043550000000000005,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate/badge-rivet-2",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 61
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate/badge-rivet-3",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.32854999999999995,
        0.043550000000000005,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate/badge-rivet-3",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 62
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate/badge-D",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.0754,
        0,
        0,
        0,
        0,
        0.0754,
        0,
        0,
        0,
        0,
        0.010556,
        0,
        -0.033176,
        0,
        0.0109166,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate/badge-D",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 63
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate/badge-S",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.0754,
        0,
        0,
        0,
        0,
        0.0754,
        0,
        0,
        0,
        0,
        0.010556,
        0,
        0.033176,
        0,
        0.0109166,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate/badge-S",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 64
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate/badge-D-back",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.0754,
        0,
        -9.233836865571042e-18,
        0,
        0,
        0.0754,
        0,
        0,
        1.292737161179946e-18,
        0,
        -0.010556,
        0,
        0.033176,
        0,
        -0.0109166,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate/badge-D-back",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 65
    },
    {
      "id": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate/badge-S-back",
      "parent": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.0754,
        0,
        -9.233836865571042e-18,
        0,
        0,
        0.0754,
        0,
        0,
        1.292737161179946e-18,
        0,
        -0.010556,
        0,
        -0.033176,
        0,
        -0.0109166,
        1
      ],
      "sourceUserData": {
        "partId": "s02-03-prepreg-ply-cutter-table/s02-03-prepreg-ply-cutter-table:base/DS_Brand_Plate/badge-S-back",
        "assetId": "s02-03-prepreg-ply-cutter-table",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 66
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "배정 패킷의 기능 범위에 따른 자체 형상·치수. 외부 CAD/제품사진/제조사 정격을 사용하지 않음."
    }
  ],
  "rights": {
    "id": "s02-03-prepreg-ply-cutter-table",
    "assetTypeId": "s02-03-prepreg-ply-cutter-table",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:5d1d4a59d418a5d556adc71b20588edeef1e45199ead9b4c9fb73437a393e9b7",
    "modelSource": "kit/models/s02-03-prepreg-ply-cutter-table.mjs",
    "dslExampleSource": "dsl/models/s02-03-prepreg-ply-cutter-table.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/s02-03-prepreg-ply-cutter-table.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/s02-03-prepreg-ply-cutter-table.txt",
      "sha256": "sha256:7483fef02bd363a7c75376d9fc357d5f1b086be2d4e26bc9e89ddcfc49fd30a7",
      "bytes": 813
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/s02-03-prepreg-ply-cutter-table/model.glb",
      "bytes": 2228328,
      "sha256": "sha256:76e2245314638a7620d7523a5ef361b8094f518502e36af6d90dcbc153adf122"
    },
    "licenses": [
      {
        "path": "open-assets/s02-03-prepreg-ply-cutter-table/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/s02-03-prepreg-ply-cutter-table/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/s02-03-prepreg-ply-cutter-table/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/s02-03-prepreg-ply-cutter-table/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/s02-03-prepreg-ply-cutter-table/LICENSES/ASSET-NOTICES/s02-03-prepreg-ply-cutter-table.txt",
        "bytes": 813,
        "sha256": "sha256:7483fef02bd363a7c75376d9fc357d5f1b086be2d4e26bc9e89ddcfc49fd30a7"
      }
    ],
    "source": {
      "path": "kit/models/s02-03-prepreg-ply-cutter-table.mjs",
      "bytes": 12374,
      "sha256": "sha256:fb5e3c4a87740a9c7fb92cb0300af4ac5d928476eff3051d1bf610aa849b9640"
    },
    "ds2": {
      "path": "dsl/models/s02-03-prepreg-ply-cutter-table.ds2",
      "bytes": 4326,
      "sha256": "sha256:1932558cb489755bdd182fea221b530400f59a8ed492c68674a9014a191e53c1",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 67,
    "triangles": 43412,
    "maxMatrixError": 4.930380657631324e-32,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 16,
    "nodeComparisons": 1072,
    "semanticFrameComparisons": 80,
    "acceptanceCases": 5,
    "acceptanceFrameComparisons": 25,
    "maxMotionMatrixError": 4.930380657631324e-32
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "s02-03-prepreg-ply-cutter-table",
    "kind": "equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "S 항공우주 / S02 복합재 성형",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "work": {
        "frameId": "knife-tip-port",
        "portClass": "process",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -0.025,
            0.915,
            0
          ],
          "quaternion": [
            0.7071067811865476,
            0,
            0,
            0.7071067811865475
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "vacuum": {
        "frameId": "vacuum-port",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0.75,
            -1.25
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "bed": {
        "frameId": "bed-seat-port",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0.875,
            0
          ],
          "quaternion": [
            0.7071067811865476,
            0,
            0,
            0.7071067811865475
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "inlet": {
        "frameId": "fabric-entry-port",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -2.4,
            0.875,
            0
          ],
          "quaternion": [
            0,
            0.7071067811865476,
            0,
            0.7071067811865475
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
