{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "s01-03-aerospace-auto-drilling-fastener",
  "assetTypeId": "s01-03-aerospace-auto-drilling-fastener",
  "label": "기체 자동 드릴링·체결 시스템(대형 로봇 드릴링 LRDS형 포함)",
  "category": "S 항공우주",
  "description": "수평 주행 베드 위 승강 컬럼·전후 스핀들 램, 실제 중공 압력 풋과 드릴 축, 별도 체결 공급구 및 기체 패널 지그를 구분한 자체 설계 직교형 장치.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -2.65,
      -2.98023217215615e-10,
      -0.7500000059604645
    ],
    "max": [
      2.65,
      3.6800000059604643,
      2.0500000059604644
    ]
  },
  "size": [
    5.3,
    3.6800000062584877,
    2.800000011920929
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 0,
      "explicitBoxFillets": 27,
      "chamferedCylinders": 0,
      "blindSocketHeads": 0,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 4,
    "warnings": [],
    "changedMeshes": 27,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 40892,
      "afterTriangles": 40892,
      "reachedTarget": true,
      "changedMeshes": 0,
      "changes": [],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/s01-03-aerospace-auto-drilling-fastener.mjs",
    "sourceSha256": "sha256:4b60c9ade02ac3e5c3ae219e8f5d10af750fac5c72c025a025dfc038552ec64a",
    "deliverySha256": "sha256:562b6e2092de06226b0c4f3937b47b01d287cb350aed1c3961e65b5964d108b4",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:2c53c2c7c4c452f98779ddb1910606c03088b0aee641ae2d30ea4fad204579d1",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:2c53c2c7c4c452f98779ddb1910606c03088b0aee641ae2d30ea4fad204579d1",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [],
  "parameterValues": {},
  "joints": [
    {
      "id": "travel_x",
      "label": "장척 레일 주행",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "unit": "m",
      "min": -1.5,
      "max": 1.5,
      "initial": 0
    },
    {
      "id": "height",
      "label": "드릴 헤드 높이",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "unit": "m",
      "min": -0.5,
      "max": 0.5,
      "initial": 0
    },
    {
      "id": "feed",
      "label": "드릴 전진",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        -1
      ],
      "unit": "m",
      "min": 0,
      "max": 0.18,
      "initial": 0
    }
  ],
  "initialState": {
    "travel_x": 0,
    "height": 0,
    "feed": 0
  },
  "bindings": [
    {
      "id": "travel_x",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage",
      "gltfNode": 16
    },
    {
      "id": "height",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle",
      "gltfNode": 30
    },
    {
      "id": "feed",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram",
      "gltfNode": 36
    }
  ],
  "jointBindings": [
    {
      "id": "travel_x",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage",
      "gltfNode": 16
    },
    {
      "id": "height",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle",
      "gltfNode": 30
    },
    {
      "id": "feed",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram",
      "gltfNode": 36
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "nodeName": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "drill-tip-port": {
      "id": "drill-tip-port",
      "node": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/s01-03-aerospace-auto-drilling-fastener:drill-tip-port",
      "nodeName": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/s01-03-aerospace-auto-drilling-fastener:drill-tip-port",
      "gltfNode": 48,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.14,
        0.15,
        1
      ],
      "position": [
        0,
        2.14,
        0.15
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "pressure-foot-port": {
      "id": "pressure-foot-port",
      "node": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/s01-03-aerospace-auto-drilling-fastener:pressure-foot-port",
      "nodeName": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/s01-03-aerospace-auto-drilling-fastener:pressure-foot-port",
      "gltfNode": 49,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.14,
        0.16,
        1
      ],
      "position": [
        0,
        2.14,
        0.16
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "fastener-supply-port": {
      "id": "fastener-supply-port",
      "node": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/s01-03-aerospace-auto-drilling-fastener:fastener-supply-port",
      "nodeName": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/s01-03-aerospace-auto-drilling-fastener:fastener-supply-port",
      "gltfNode": 50,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        -2.220446049250313e-16,
        1.0000000000000002,
        0,
        0,
        -1.0000000000000002,
        -2.220446049250313e-16,
        0,
        0.19,
        2.31,
        0.42,
        1
      ],
      "position": [
        0.19,
        2.31,
        0.42
      ],
      "quaternion": [
        0.7071067811865476,
        0,
        0,
        0.7071067811865475
      ]
    },
    "panel-reference": {
      "id": "panel-reference",
      "node": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/s01-03-aerospace-auto-drilling-fastener:panel-reference",
      "nodeName": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/s01-03-aerospace-auto-drilling-fastener:panel-reference",
      "gltfNode": 86,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.14,
        -0.0425,
        1
      ],
      "position": [
        0,
        2.14,
        -0.0425
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    }
  },
  "ports": {
    "mount": "base",
    "work": "drill-tip-port",
    "pressure": "pressure-foot-port",
    "supply": "fastener-supply-port",
    "datum": "panel-reference"
  },
  "nodes": [
    {
      "id": "s01-03-aerospace-auto-drilling-fastener",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 0,
            "explicitBoxFillets": 27,
            "chamferedCylinders": 0,
            "blindSocketHeads": 0,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 4,
          "warnings": [],
          "changedMeshes": 27,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 40892,
            "afterTriangles": 40892,
            "reachedTarget": true,
            "changedMeshes": 0,
            "changes": [],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "s01-03-aerospace-auto-drilling-fastener",
          "coordinate_profile": "lib3d-world/1",
          "label": "항공기 자동 드릴링·체결 시스템",
          "category": "S 항공우주 / S01 기체 구조 조립",
          "summary": "수평 주행 베드 위 승강 컬럼·전후 스핀들 램, 실제 중공 압력 풋과 드릴 축, 별도 체결 공급구 및 기체 패널 지그를 구분한 자체 설계 직교형 장치.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [],
          "joints": [
            {
              "id": "travel_x",
              "label": "장척 레일 주행",
              "kind": "prismatic",
              "axis": [
                1,
                0,
                0
              ],
              "unit": "m",
              "min": -1.5,
              "max": 1.5,
              "initial": 0
            },
            {
              "id": "height",
              "label": "드릴 헤드 높이",
              "kind": "prismatic",
              "axis": [
                0,
                1,
                0
              ],
              "unit": "m",
              "min": -0.5,
              "max": 0.5,
              "initial": 0
            },
            {
              "id": "feed",
              "label": "드릴 전진",
              "kind": "prismatic",
              "axis": [
                0,
                0,
                -1
              ],
              "unit": "m",
              "min": 0,
              "max": 0.18,
              "initial": 0
            }
          ],
          "ports": {
            "mount": "base",
            "work": "drill-tip-port",
            "pressure": "pressure-foot-port",
            "supply": "fastener-supply-port",
            "datum": "panel-reference"
          },
          "required_host_features": [
            "prismatic"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "배정 패킷의 기능 범위에 따른 자체 형상·치수. 외부 CAD/제품사진/제조사 정격을 사용하지 않음."
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {},
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
          "drill-tip-port": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/s01-03-aerospace-auto-drilling-fastener:drill-tip-port",
          "pressure-foot-port": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/s01-03-aerospace-auto-drilling-fastener:pressure-foot-port",
          "fastener-supply-port": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/s01-03-aerospace-auto-drilling-fastener:fastener-supply-port",
          "panel-reference": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/s01-03-aerospace-auto-drilling-fastener:panel-reference"
        },
        "jointBindings": [
          {
            "id": "travel_x",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage"
          },
          {
            "id": "height",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle"
          },
          {
            "id": "feed",
            "kind": "prismatic",
            "axis": [
              0,
              0,
              -1
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram"
          }
        ],
        "joints": [
          {
            "id": "travel_x",
            "label": "장척 레일 주행",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "unit": "m",
            "min": -1.5,
            "max": 1.5,
            "initial": 0,
            "value": 0
          },
          {
            "id": "height",
            "label": "드릴 헤드 높이",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "unit": "m",
            "min": -0.5,
            "max": 0.5,
            "initial": 0,
            "value": 0
          },
          {
            "id": "feed",
            "label": "드릴 전진",
            "kind": "prismatic",
            "axis": [
              0,
              0,
              -1
            ],
            "unit": "m",
            "min": 0,
            "max": 0.18,
            "initial": 0,
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 44
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "배정 패킷의 기능 범위에 따른 자체 형상·치수. 외부 CAD/제품사진/제조사 정격을 사용하지 않음."
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "travel_x": 0,
          "height": 0,
          "feed": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "parent": "s01-03-aerospace-auto-drilling-fastener",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener:base"
      },
      "gltfNode": 1
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-foot--2-0.75",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2,
        0.07,
        0.75,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-foot--2-0.75",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "mounting_plate",
        "BOMqty": 1
      },
      "gltfNode": 2
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-leg--2-0.75",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2,
        0.255,
        0.75,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-leg--2-0.75",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.25,
            "depth": 0.22,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 3
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-foot--2-1.65",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2,
        0.07,
        1.65,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-foot--2-1.65",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "mounting_plate",
        "BOMqty": 1
      },
      "gltfNode": 4
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-leg--2-1.65",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2,
        0.255,
        1.65,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-leg--2-1.65",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.25,
            "depth": 0.22,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 5
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-foot-0-0.75",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.07,
        0.75,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-foot-0-0.75",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "mounting_plate",
        "BOMqty": 1
      },
      "gltfNode": 6
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-leg-0-0.75",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.255,
        0.75,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-leg-0-0.75",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.25,
            "depth": 0.22,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 7
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-foot-0-1.65",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.07,
        1.65,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-foot-0-1.65",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "mounting_plate",
        "BOMqty": 1
      },
      "gltfNode": 8
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-leg-0-1.65",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.255,
        1.65,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-leg-0-1.65",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.25,
            "depth": 0.22,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 9
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-foot-2-0.75",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2,
        0.07,
        0.75,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-foot-2-0.75",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "mounting_plate",
        "BOMqty": 1
      },
      "gltfNode": 10
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-leg-2-0.75",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2,
        0.255,
        0.75,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-leg-2-0.75",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.25,
            "depth": 0.22,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 11
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-foot-2-1.65",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2,
        0.07,
        1.65,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-foot-2-1.65",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "mounting_plate",
        "BOMqty": 1
      },
      "gltfNode": 12
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-leg-2-1.65",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2,
        0.255,
        1.65,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/rail-leg-2-1.65",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.25,
            "depth": 0.22,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 13
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-way-0.75",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.47,
        0.75,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-way-0.75",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 4.8,
            "height": 0.12,
            "depth": 0.12,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 14
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-way-1.65",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.47,
        1.65,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-way-1.65",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 4.8,
            "height": 0.12,
            "depth": 0.12,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 15
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "X-carriage"
      },
      "gltfNode": 16
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/base-carriage",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.64,
        1.2,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/base-carriage",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.8,
            "height": 0.18,
            "depth": 1.2,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 17
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/X-bearing-0.75",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.47,
        0.75,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/X-bearing-0.75",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 18
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/X-bearing-1.65",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.47,
        1.65,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/X-bearing-1.65",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 19
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/column",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.12,
        1.55,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/column",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.42,
            "height": 2.9,
            "depth": 0.4,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 20
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/vertical-guide--0.17",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.17,
        2.1,
        1.29,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/vertical-guide--0.17",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 2.55,
            "depth": 0.055,
            "radius": 0.0013750000000000001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 21
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/vertical-guide-0.17",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.17,
        2.1,
        1.29,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/vertical-guide-0.17",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.055,
            "height": 2.55,
            "depth": 0.055,
            "radius": 0.0013750000000000001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 22
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-drive",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        3.53,
        1.55,
        1
      ],
      "sourceUserData": {
        "partId": "Y-drive"
      },
      "gltfNode": 23
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-drive/motor-body",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-drive",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-drive/motor-body",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 24
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-drive/cooling-fin--2",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-drive",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.09999999999999999,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-drive/cooling-fin--2",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "hollow_port",
        "BOMqty": 1
      },
      "gltfNode": 25
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-drive/cooling-fin--1",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-drive",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.049999999999999996,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-drive/cooling-fin--1",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "hollow_port",
        "BOMqty": 1
      },
      "gltfNode": 26
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-drive/cooling-fin-0",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-drive",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-drive/cooling-fin-0",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "hollow_port",
        "BOMqty": 1
      },
      "gltfNode": 27
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-drive/cooling-fin-1",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-drive",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.049999999999999996,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-drive/cooling-fin-1",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "hollow_port",
        "BOMqty": 1
      },
      "gltfNode": 28
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-drive/cooling-fin-2",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-drive",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.09999999999999999,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-drive/cooling-fin-2",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "hollow_port",
        "BOMqty": 1
      },
      "gltfNode": 29
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "Y-saddle"
      },
      "gltfNode": 30
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Y-bearing--0.17",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.17,
        2.1,
        1.29,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Y-bearing--0.17",
        "assetId": "s01-03-aerospace-auto-drilling-fastener"
      },
      "gltfNode": 31
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Y-bearing-0.17",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.17,
        2.1,
        1.29,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Y-bearing-0.17",
        "assetId": "s01-03-aerospace-auto-drilling-fastener"
      },
      "gltfNode": 32
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/head-bracket",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.1,
        1.2,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/head-bracket",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.6,
            "height": 0.55,
            "depth": 0.13,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 33
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/ram-guide--0.19",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.19,
        2.06,
        0.83,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/ram-guide--0.19",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.06,
            "height": 0.06,
            "depth": 0.8,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 34
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/ram-guide-0.19",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.19,
        2.06,
        0.83,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/ram-guide-0.19",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.06,
            "height": 0.06,
            "depth": 0.8,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 35
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "Z-drill-ram"
      },
      "gltfNode": 36
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/ram-bearing--0.19",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.19,
        2.06,
        0.83,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/ram-bearing--0.19",
        "assetId": "s01-03-aerospace-auto-drilling-fastener"
      },
      "gltfNode": 37
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/ram-bearing-0.19",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.19,
        2.06,
        0.83,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/ram-bearing-0.19",
        "assetId": "s01-03-aerospace-auto-drilling-fastener"
      },
      "gltfNode": 38
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/spindle-cradle",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.98,
        0.7,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/spindle-cradle",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.56,
            "height": 0.18,
            "depth": 0.5,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 39
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/spindle-motor",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        2.14,
        0.72,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/spindle-motor",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 40
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/tool-holder",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        2.14,
        0.38,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/tool-holder",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "hollow_port",
        "BOMqty": 1
      },
      "gltfNode": 41
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/drill-bit",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        2.14,
        0.25,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/drill-bit",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 42
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/pressure-foot",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        2.14,
        0.22,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/pressure-foot",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "hollow_port",
        "BOMqty": 1
      },
      "gltfNode": 43
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/foot-bracket--0.08",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.08,
        2.06,
        0.4,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/foot-bracket--0.08",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.06,
            "depth": 0.4,
            "radius": 0.0012500000000000002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 44
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/foot-bracket-0.08",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.08,
        2.06,
        0.4,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/foot-bracket-0.08",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.06,
            "depth": 0.4,
            "radius": 0.0012500000000000002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 45
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/fastener-feed-bracket",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.15,
        2.17,
        0.44,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/fastener-feed-bracket",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.06,
            "depth": 0.16,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 46
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/fastener-feed-neck",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.19,
        2.24,
        0.42,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/fastener-feed-neck",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "hollow_port",
        "BOMqty": 1
      },
      "gltfNode": 47
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/s01-03-aerospace-auto-drilling-fastener:drill-tip-port",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.14,
        0.15,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener:drill-tip-port"
      },
      "gltfNode": 48
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/s01-03-aerospace-auto-drilling-fastener:pressure-foot-port",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.14,
        0.16,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener:pressure-foot-port"
      },
      "gltfNode": 49
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram/s01-03-aerospace-auto-drilling-fastener:fastener-supply-port",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-drill-ram",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        -2.220446049250313e-16,
        1.0000000000000002,
        0,
        0,
        -1.0000000000000002,
        -2.220446049250313e-16,
        0,
        0.19,
        2.31,
        0.42,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener:fastener-supply-port"
      },
      "gltfNode": 50
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-feed-drive",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.06,
        1.35,
        1
      ],
      "sourceUserData": {
        "partId": "Z-feed-drive"
      },
      "gltfNode": 51
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-feed-drive/motor-body",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-feed-drive",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-feed-drive/motor-body",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 52
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-feed-drive/cooling-fin--2",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-feed-drive",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        -0.08333333333333333,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-feed-drive/cooling-fin--2",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "hollow_port",
        "BOMqty": 1
      },
      "gltfNode": 53
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-feed-drive/cooling-fin--1",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-feed-drive",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        -0.041666666666666664,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-feed-drive/cooling-fin--1",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "hollow_port",
        "BOMqty": 1
      },
      "gltfNode": 54
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-feed-drive/cooling-fin-0",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-feed-drive",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-feed-drive/cooling-fin-0",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "hollow_port",
        "BOMqty": 1
      },
      "gltfNode": 55
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-feed-drive/cooling-fin-1",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-feed-drive",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0.041666666666666664,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-feed-drive/cooling-fin-1",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "hollow_port",
        "BOMqty": 1
      },
      "gltfNode": 56
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-feed-drive/cooling-fin-2",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-feed-drive",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0.08333333333333333,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/Y-saddle/Z-feed-drive/cooling-fin-2",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "hollow_port",
        "BOMqty": 1
      },
      "gltfNode": 57
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.66,
        1.81,
        1
      ],
      "sourceUserData": {
        "partId": "DS_Brand_Plate",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 58
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate/badge-bezel",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate/badge-bezel",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 59
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate/badge-backing",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate/badge-backing",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 60
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate/badge-rivet-0",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.267,
        -0.067,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate/badge-rivet-0",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 61
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate/badge-rivet-1",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.267,
        0.067,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate/badge-rivet-1",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 62
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate/badge-rivet-2",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.267,
        -0.067,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate/badge-rivet-2",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 63
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate/badge-rivet-3",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.267,
        0.067,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate/badge-rivet-3",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 64
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate/badge-D",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.11599999999999999,
        0,
        0,
        0,
        0,
        0.11599999999999999,
        0,
        0,
        0,
        0,
        0.0135,
        0,
        -0.051039999999999995,
        0,
        0.012975,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate/badge-D",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 65
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate/badge-S",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.11599999999999999,
        0,
        0,
        0,
        0,
        0.11599999999999999,
        0,
        0,
        0,
        0,
        0.0135,
        0,
        0.051039999999999995,
        0,
        0.012975,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate/badge-S",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 66
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate/badge-D-back",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.11599999999999999,
        0,
        -1.4205902870109297e-17,
        0,
        0,
        0.11599999999999999,
        0,
        0,
        1.6532731788489268e-18,
        0,
        -0.0135,
        0,
        0.051039999999999995,
        0,
        -0.012975,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate/badge-D-back",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 67
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate/badge-S-back",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.11599999999999999,
        0,
        -1.4205902870109297e-17,
        0,
        0,
        0.11599999999999999,
        0,
        0,
        1.6532731788489268e-18,
        0,
        -0.0135,
        0,
        -0.051039999999999995,
        0,
        -0.012975,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/X-carriage/DS_Brand_Plate/badge-S-back",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 68
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/panel-fixture--2.15-foot",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.15,
        0.07,
        -0.35,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/panel-fixture--2.15-foot",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "mounting_plate",
        "BOMqty": 1
      },
      "gltfNode": 69
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/panel-fixture--2.15",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.15,
        1.62,
        -0.35,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/panel-fixture--2.15",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.28,
            "height": 2.96,
            "depth": 0.28,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 70
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/panel-fixture--2.15-rib-x",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.15,
        0.29,
        -0.35,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/panel-fixture--2.15-rib-x",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.62,
            "height": 0.3,
            "depth": 0.07,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 71
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/panel-fixture--2.15-rib-z",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.15,
        0.29,
        -0.35,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/panel-fixture--2.15-rib-z",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.3,
            "depth": 0.52,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 2,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00002,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 72
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/panel-clamp--2.15",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.15,
        1.85,
        -0.12,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/panel-clamp--2.15",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.28,
            "height": 2.6,
            "depth": 0.14,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 73
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/panel-fixture-2.15-foot",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.15,
        0.07,
        -0.35,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/panel-fixture-2.15-foot",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "mounting_plate",
        "BOMqty": 1
      },
      "gltfNode": 74
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/panel-fixture-2.15",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.15,
        1.62,
        -0.35,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/panel-fixture-2.15",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.28,
            "height": 2.96,
            "depth": 0.28,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 75
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/panel-fixture-2.15-rib-x",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.15,
        0.29,
        -0.35,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/panel-fixture-2.15-rib-x",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.62,
            "height": 0.3,
            "depth": 0.07,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 76
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/panel-fixture-2.15-rib-z",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.15,
        0.29,
        -0.35,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/panel-fixture-2.15-rib-z",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.3,
            "depth": 0.52,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 2,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00002,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 77
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/panel-clamp-2.15",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.15,
        1.85,
        -0.12,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/panel-clamp-2.15",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.28,
            "height": 2.6,
            "depth": 0.14,
            "radius": 0.0015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 78
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/preview-airframe-panel",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "preview-airframe-panel",
        "componentRole": "preview_workpiece",
        "previewOnly": true
      },
      "gltfNode": 79
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/preview-airframe-panel/airframe-skin",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/preview-airframe-panel",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.14,
        -0.055,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/preview-airframe-panel/airframe-skin",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "preview_workpiece",
        "previewOnly": true
      },
      "gltfNode": 80
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/preview-airframe-panel/stringer--1.6",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/preview-airframe-panel",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.6,
        2.14,
        -0.13,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/preview-airframe-panel/stringer--1.6",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "previewOnly": true
      },
      "gltfNode": 81
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/preview-airframe-panel/stringer--0.8",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/preview-airframe-panel",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.8,
        2.14,
        -0.13,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/preview-airframe-panel/stringer--0.8",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "previewOnly": true
      },
      "gltfNode": 82
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/preview-airframe-panel/stringer-0",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/preview-airframe-panel",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.14,
        -0.13,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/preview-airframe-panel/stringer-0",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "previewOnly": true
      },
      "gltfNode": 83
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/preview-airframe-panel/stringer-0.8",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/preview-airframe-panel",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.8,
        2.14,
        -0.13,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/preview-airframe-panel/stringer-0.8",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "previewOnly": true
      },
      "gltfNode": 84
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/preview-airframe-panel/stringer-1.6",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/preview-airframe-panel",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.6,
        2.14,
        -0.13,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/preview-airframe-panel/stringer-1.6",
        "assetId": "s01-03-aerospace-auto-drilling-fastener",
        "componentRole": "preview_workpiece",
        "BOMqty": 1,
        "previewOnly": true
      },
      "gltfNode": 85
    },
    {
      "id": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base/s01-03-aerospace-auto-drilling-fastener:panel-reference",
      "parent": "s01-03-aerospace-auto-drilling-fastener/s01-03-aerospace-auto-drilling-fastener:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.14,
        -0.0425,
        1
      ],
      "sourceUserData": {
        "partId": "s01-03-aerospace-auto-drilling-fastener:panel-reference"
      },
      "gltfNode": 86
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "배정 패킷의 기능 범위에 따른 자체 형상·치수. 외부 CAD/제품사진/제조사 정격을 사용하지 않음."
    }
  ],
  "rights": {
    "id": "s01-03-aerospace-auto-drilling-fastener",
    "assetTypeId": "s01-03-aerospace-auto-drilling-fastener",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:4b60c9ade02ac3e5c3ae219e8f5d10af750fac5c72c025a025dfc038552ec64a",
    "modelSource": "kit/models/s01-03-aerospace-auto-drilling-fastener.mjs",
    "dslExampleSource": "dsl/models/s01-03-aerospace-auto-drilling-fastener.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/s01-03-aerospace-auto-drilling-fastener.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/s01-03-aerospace-auto-drilling-fastener.txt",
      "sha256": "sha256:3888b4c9fe4daca28dfcb2abed047043929c5f10b735bbc140e32f39cc06503c",
      "bytes": 821
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/s01-03-aerospace-auto-drilling-fastener/model.glb",
      "bytes": 1409988,
      "sha256": "sha256:b0f4741831d63785d06988d1688de68676a5a199a3789df0a9423d713815757a"
    },
    "licenses": [
      {
        "path": "open-assets/s01-03-aerospace-auto-drilling-fastener/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/s01-03-aerospace-auto-drilling-fastener/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/s01-03-aerospace-auto-drilling-fastener/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/s01-03-aerospace-auto-drilling-fastener/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/s01-03-aerospace-auto-drilling-fastener/LICENSES/ASSET-NOTICES/s01-03-aerospace-auto-drilling-fastener.txt",
        "bytes": 821,
        "sha256": "sha256:3888b4c9fe4daca28dfcb2abed047043929c5f10b735bbc140e32f39cc06503c"
      }
    ],
    "source": {
      "path": "kit/models/s01-03-aerospace-auto-drilling-fastener.mjs",
      "bytes": 11610,
      "sha256": "sha256:562b6e2092de06226b0c4f3937b47b01d287cb350aed1c3961e65b5964d108b4"
    },
    "ds2": {
      "path": "dsl/models/s01-03-aerospace-auto-drilling-fastener.ds2",
      "bytes": 3532,
      "sha256": "sha256:d6292594a0c8040f190fe95f62901301e4593063dd4d5ee1c8fdfbd28f4887d9",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 87,
    "triangles": 40892,
    "maxMatrixError": 4.930380657631324e-32,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 14,
    "nodeComparisons": 1218,
    "semanticFrameComparisons": 70,
    "acceptanceCases": 5,
    "acceptanceFrameComparisons": 25,
    "maxMotionMatrixError": 4.930380657631324e-32
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "s01-03-aerospace-auto-drilling-fastener",
    "kind": "equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "S 항공우주 / S01 기체 구조 조립",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "work": {
        "frameId": "drill-tip-port",
        "portClass": "process",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            2.14,
            0.15
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "pressure": {
        "frameId": "pressure-foot-port",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            2.14,
            0.16
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "supply": {
        "frameId": "fastener-supply-port",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.19,
            2.31,
            0.42
          ],
          "quaternion": [
            0.7071067811865476,
            0,
            0,
            0.7071067811865475
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "datum": {
        "frameId": "panel-reference",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            2.14,
            -0.0425
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
