{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "p03-06-ev-hairpin-stator-rotor-puck",
  "assetTypeId": "p03-06-ev-hairpin-stator-rotor-puck",
  "label": "EV 모터 헤어핀 스테이터·로터 퍽 캐리어",
  "category": "P 공용 운반물",
  "description": "e04-02/03/08 헤어핀 모터 직렬 조립·용접·검사 라인에서 스테이터 적층 코어와 동축 IPM 로터를 안착 이송하는 원형 스핀들 퍽 캐리어 표시 모델. 중앙 스핀들·로터 중공 샤프트 보어(Ø0.072 m)와 4코너 지그 위치결정 부싱 핀 구멍(Ø0.016 m)이 실제 수직 관통되며, 다층 평각 구리 헤어핀 크라운 돌출/승강 관절(hairpin_crown_lift), 3방 외경 클램프 조 파지 관절(puck_clamp), 전면 DS 브랜드 입체 명판을 갖춘 모델.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -0.19100000002607703,
      -1.163414476868685e-17,
      -0.1899999976158142
    ],
    "max": [
      0.1899999976158142,
      0.2799999993890524,
      0.19424236
    ]
  },
  "size": [
    0.38099999764189124,
    0.2799999993890524,
    0.3842423576158142
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 61,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 0,
      "blindSocketHeads": 4,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 0,
    "warnings": [],
    "changedMeshes": 65,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 71112,
      "afterTriangles": 71112,
      "reachedTarget": true,
      "changedMeshes": 0,
      "changes": [],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/p03-06-ev-hairpin-stator-rotor-puck.mjs",
    "sourceSha256": "sha256:4447983f1b76f8cd013d8bdcacc02cbc022a17a485ec23ee09fb9155607146cb",
    "deliverySha256": "sha256:4447983f1b76f8cd013d8bdcacc02cbc022a17a485ec23ee09fb9155607146cb",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:39279153350036b41c2e2a537cf01017326f4224bd8720e75494e4e2a570069a",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:39279153350036b41c2e2a537cf01017326f4224bd8720e75494e4e2a570069a",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [
    {
      "id": "stator_height",
      "type": "number",
      "unit": "m",
      "min": 0.14,
      "max": 0.2,
      "default": 0.17
    }
  ],
  "parameterValues": {
    "stator_height": 0.17
  },
  "joints": [
    {
      "id": "hairpin_crown_lift",
      "label": "구리 평각선 헤어핀 권선 크라운 상방(+Y) 삽입·돌출 리프트",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "unit": "m",
      "min": 0,
      "max": 0.065,
      "initial": 0
    },
    {
      "id": "puck_clamp",
      "label": "퍽 터릿 반경방향 3-조 스테이터 외경 클램프 파지 스트로크",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "unit": "m",
      "min": 0,
      "max": 0.018,
      "initial": 0
    }
  ],
  "initialState": {
    "hairpin_crown_lift": 0,
    "puck_clamp": 0
  },
  "bindings": [
    {
      "id": "hairpin_crown_lift",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.21400000000000002,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "gltfNode": 32
    },
    {
      "id": "puck_clamp",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        -0.14,
        0.044,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-left",
      "gltfNode": 87
    },
    {
      "id": "puck_clamp",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0.14,
        0.044,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1,
      "nodeName": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-right",
      "gltfNode": 91
    },
    {
      "id": "puck_clamp",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0.044,
        -0.14
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-rear",
      "gltfNode": 94
    }
  ],
  "jointBindings": [
    {
      "id": "hairpin_crown_lift",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.21400000000000002,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "gltfNode": 32
    },
    {
      "id": "puck_clamp",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        -0.14,
        0.044,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-left",
      "gltfNode": 87
    },
    {
      "id": "puck_clamp",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0.14,
        0.044,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1,
      "nodeName": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-right",
      "gltfNode": 91
    },
    {
      "id": "puck_clamp",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0.044,
        -0.14
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-rear",
      "gltfNode": 94
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base",
      "nodeName": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "spindle-center-bore-frame": {
      "id": "spindle-center-bore-frame",
      "node": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/p03-06-ev-hairpin-stator-rotor-puck:spindle-center-bore-frame",
      "nodeName": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/p03-06-ev-hairpin-stator-rotor-puck:spindle-center-bore-frame",
      "gltfNode": 97,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.044,
        0,
        1
      ],
      "position": [
        0,
        0.044,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "datum-bushing-FL": {
      "id": "datum-bushing-FL",
      "node": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/p03-06-ev-hairpin-stator-rotor-puck:datum-bushing-FL",
      "nodeName": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/p03-06-ev-hairpin-stator-rotor-puck:datum-bushing-FL",
      "gltfNode": 98,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.148,
        0,
        0.148,
        1
      ],
      "position": [
        -0.148,
        0,
        0.148
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "puck-grip-notch-left": {
      "id": "puck-grip-notch-left",
      "node": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/p03-06-ev-hairpin-stator-rotor-puck:puck-grip-notch-left",
      "nodeName": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/p03-06-ev-hairpin-stator-rotor-puck:puck-grip-notch-left",
      "gltfNode": 99,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.168,
        0.02,
        0,
        1
      ],
      "position": [
        -0.168,
        0.02,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "puck-grip-notch-right": {
      "id": "puck-grip-notch-right",
      "node": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/p03-06-ev-hairpin-stator-rotor-puck:puck-grip-notch-right",
      "nodeName": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/p03-06-ev-hairpin-stator-rotor-puck:puck-grip-notch-right",
      "gltfNode": 100,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.168,
        0.02,
        0,
        1
      ],
      "position": [
        0.168,
        0.02,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "hairpin-crown-top-frame": {
      "id": "hairpin-crown-top-frame",
      "node": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/p03-06-ev-hairpin-stator-rotor-puck:hairpin-crown-top-frame",
      "nodeName": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/p03-06-ev-hairpin-stator-rotor-puck:hairpin-crown-top-frame",
      "gltfNode": 86,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.28,
        0,
        1
      ],
      "position": [
        0,
        0.28,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "puck-clamp-jaw-frame": {
      "id": "puck-clamp-jaw-frame",
      "node": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-left/p03-06-ev-hairpin-stator-rotor-puck:puck-clamp-jaw-frame",
      "nodeName": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-left/p03-06-ev-hairpin-stator-rotor-puck:puck-clamp-jaw-frame",
      "gltfNode": 90,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.14,
        0.068,
        0,
        1
      ],
      "position": [
        -0.14,
        0.068,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    }
  },
  "ports": {
    "mount": "base",
    "center_bore": "spindle-center-bore-frame",
    "datum_pin": "datum-bushing-FL",
    "grip_left": "puck-grip-notch-left",
    "grip_right": "puck-grip-notch-right",
    "hairpin_crown": "hairpin-crown-top-frame",
    "clamp_jaw": "puck-clamp-jaw-frame"
  },
  "nodes": [
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 61,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 0,
            "blindSocketHeads": 4,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 0,
          "warnings": [],
          "changedMeshes": 65,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 71112,
            "afterTriangles": 71112,
            "reachedTarget": true,
            "changedMeshes": 0,
            "changes": [],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "p03-06-ev-hairpin-stator-rotor-puck",
          "coordinate_profile": "lib3d-world/1",
          "label": "EV 모터 헤어핀 스테이터·로터 퍽 캐리어",
          "category": "P 공용 운반물 / P03 자동차 반제품",
          "summary": "e04-02/03/08 헤어핀 모터 직렬 조립·용접·검사 라인에서 스테이터 적층 코어와 동축 IPM 로터를 안착 이송하는 원형 스핀들 퍽 캐리어 표시 모델. 중앙 스핀들·로터 중공 샤프트 보어(Ø0.072 m)와 4코너 지그 위치결정 부싱 핀 구멍(Ø0.016 m)이 실제 수직 관통되며, 다층 평각 구리 헤어핀 크라운 돌출/승강 관절(hairpin_crown_lift), 3방 외경 클램프 조 파지 관절(puck_clamp), 전면 DS 브랜드 입체 명판을 갖춘 모델.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [
            {
              "id": "stator_height",
              "type": "number",
              "unit": "m",
              "min": 0.14,
              "max": 0.2,
              "default": 0.17
            }
          ],
          "joints": [
            {
              "id": "hairpin_crown_lift",
              "label": "구리 평각선 헤어핀 권선 크라운 상방(+Y) 삽입·돌출 리프트",
              "kind": "prismatic",
              "axis": [
                0,
                1,
                0
              ],
              "unit": "m",
              "min": 0,
              "max": 0.065,
              "initial": 0
            },
            {
              "id": "puck_clamp",
              "label": "퍽 터릿 반경방향 3-조 스테이터 외경 클램프 파지 스트로크",
              "kind": "prismatic",
              "axis": [
                1,
                0,
                0
              ],
              "unit": "m",
              "min": 0,
              "max": 0.018,
              "initial": 0
            }
          ],
          "ports": {
            "mount": "base",
            "center_bore": "spindle-center-bore-frame",
            "datum_pin": "datum-bushing-FL",
            "grip_left": "puck-grip-notch-left",
            "grip_right": "puck-grip-notch-right",
            "hairpin_crown": "hairpin-crown-top-frame",
            "clamp_jaw": "puck-clamp-jaw-frame"
          },
          "required_host_features": [
            "prismatic"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "P03-06 패킷 설계 지침(원형 스핀들 이송 퍽, 적층 코어 및 중앙 샤프트 중공 보어 실제 수직 관통, 4코너 위치결정 부싱 관통홀, 구리 헤어핀 크라운 돌출 관절 hairpin_crown_lift, 퍽 클램프 관절 puck_clamp 및 정면 DS_Brand_Plate)에 따른 자체 설계 표시 모델."
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {
          "stator_height": 0.17
        },
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base",
          "spindle-center-bore-frame": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/p03-06-ev-hairpin-stator-rotor-puck:spindle-center-bore-frame",
          "datum-bushing-FL": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/p03-06-ev-hairpin-stator-rotor-puck:datum-bushing-FL",
          "puck-grip-notch-left": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/p03-06-ev-hairpin-stator-rotor-puck:puck-grip-notch-left",
          "puck-grip-notch-right": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/p03-06-ev-hairpin-stator-rotor-puck:puck-grip-notch-right",
          "hairpin-crown-top-frame": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/p03-06-ev-hairpin-stator-rotor-puck:hairpin-crown-top-frame",
          "puck-clamp-jaw-frame": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-left/p03-06-ev-hairpin-stator-rotor-puck:puck-clamp-jaw-frame"
        },
        "jointBindings": [
          {
            "id": "hairpin_crown_lift",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0.21400000000000002,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group"
          },
          {
            "id": "puck_clamp",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              -0.14,
              0.044,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-left"
          },
          {
            "id": "puck_clamp",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              0.14,
              0.044,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": -1,
            "nodeName": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-right"
          },
          {
            "id": "puck_clamp",
            "kind": "prismatic",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0,
              0.044,
              -0.14
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-rear"
          }
        ],
        "joints": [
          {
            "id": "hairpin_crown_lift",
            "label": "구리 평각선 헤어핀 권선 크라운 상방(+Y) 삽입·돌출 리프트",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "unit": "m",
            "min": 0,
            "max": 0.065,
            "initial": 0,
            "value": 0
          },
          {
            "id": "puck_clamp",
            "label": "퍽 터릿 반경방향 3-조 스테이터 외경 클램프 파지 스트로크",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "unit": "m",
            "min": 0,
            "max": 0.018,
            "initial": 0,
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 24
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "P03-06 패킷 설계 지침(원형 스핀들 이송 퍽, 적층 코어 및 중앙 샤프트 중공 보어 실제 수직 관통, 4코너 위치결정 부싱 관통홀, 구리 헤어핀 크라운 돌출 관절 hairpin_crown_lift, 퍽 클램프 관절 puck_clamp 및 정면 DS_Brand_Plate)에 따른 자체 설계 표시 모델."
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "hairpin_crown_lift": 0,
          "puck_clamp": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck:base",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 1
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "puck-carrier-group",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 2
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/puck-base-plate",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/puck-base-plate",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 3
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/locating-bushing-FL",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.148,
        0,
        0.148,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/locating-bushing-FL",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "bearing",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 4
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/locating-bushing-FR",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.148,
        0,
        0.148,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/locating-bushing-FR",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "bearing",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 5
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/locating-bushing-RL",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.148,
        0,
        -0.148,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/locating-bushing-RL",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "bearing",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 6
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/locating-bushing-RR",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.148,
        0,
        -0.148,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/locating-bushing-RR",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "bearing",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 7
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/puck-spindle-turret",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.02,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/puck-spindle-turret",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 8
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/clamp-guide-housing-left",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.158,
        0.031,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/clamp-guide-housing-left",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.036,
            "height": 0.022,
            "depth": 0.04,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 9
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/clamp-guide-housing-right",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.158,
        0.031,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/clamp-guide-housing-right",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.036,
            "height": 0.022,
            "depth": 0.04,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 10
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/clamp-guide-housing-rear",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.031,
        -0.158,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/clamp-guide-housing-rear",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.04,
            "height": 0.022,
            "depth": 0.036,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 11
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/puck-rfid-transponder",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.188,
        0.01,
        0.06,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/puck-rfid-transponder",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "sensor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.006,
            "height": 0.014,
            "depth": 0.048,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 12
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.011,
        0.191,
        1
      ],
      "sourceUserData": {
        "partId": "DS_Brand_Plate",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 13
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate/badge-bezel",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate/badge-bezel",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 14
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate/badge-backing",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate/badge-backing",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 15
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate/badge-rivet-0",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.05103,
        -0.006029999999999999,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate/badge-rivet-0",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 16
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate/badge-rivet-1",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.05103,
        0.006029999999999999,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate/badge-rivet-1",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 17
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate/badge-rivet-2",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.05103,
        -0.006029999999999999,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate/badge-rivet-2",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 18
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate/badge-rivet-3",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.05103,
        0.006029999999999999,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate/badge-rivet-3",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 19
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate/badge-D",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.010439999999999998,
        0,
        0,
        0,
        0,
        0.010439999999999998,
        0,
        0,
        0,
        0,
        0.0014615999999999997,
        0,
        -0.004593599999999999,
        0,
        0.0017807600000000002,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate/badge-D",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 20
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate/badge-S",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.010439999999999998,
        0,
        0,
        0,
        0,
        0.010439999999999998,
        0,
        0,
        0,
        0,
        0.0014615999999999997,
        0,
        0.004593599999999999,
        0,
        0.0017807600000000002,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate/badge-S",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 21
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate/badge-D-back",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.010439999999999998,
        0,
        -1.2785312583098364e-18,
        0,
        0,
        0.010439999999999998,
        0,
        0,
        1.7899437616337712e-19,
        0,
        -0.0014615999999999997,
        0,
        0.004593599999999999,
        0,
        -0.0017807600000000002,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate/badge-D-back",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 22
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate/badge-S-back",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.010439999999999998,
        0,
        -1.2785312583098364e-18,
        0,
        0,
        0.010439999999999998,
        0,
        0,
        1.7899437616337712e-19,
        0,
        -0.0014615999999999997,
        0,
        -0.004593599999999999,
        0,
        -0.0017807600000000002,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-carrier-group/DS_Brand_Plate/badge-S-back",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 23
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/stator-rotor-core-group",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.044,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "stator-rotor-core-group",
        "componentRole": "workpiece",
        "BOMqty": 1
      },
      "gltfNode": 24
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/stator-rotor-core-group/stator-laminated-core",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/stator-rotor-core-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/stator-rotor-core-group/stator-laminated-core",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1
      },
      "gltfNode": 25
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/stator-rotor-core-group/ipm-rotor-laminated-core",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/stator-rotor-core-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/stator-rotor-core-group/ipm-rotor-laminated-core",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1
      },
      "gltfNode": 26
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/stator-rotor-core-group/rotor-balance-end-ring",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/stator-rotor-core-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.166,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/stator-rotor-core-group/rotor-balance-end-ring",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1
      },
      "gltfNode": 27
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/stator-rotor-core-group/stator-tie-bolt-head-0",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/stator-rotor-core-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.109,
        0.17200000000000001,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/stator-rotor-core-group/stator-tie-bolt-head-0",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 28
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/stator-rotor-core-group/stator-tie-bolt-head-1",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/stator-rotor-core-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        6.674325055353075e-18,
        0.17200000000000001,
        0.109,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/stator-rotor-core-group/stator-tie-bolt-head-1",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 29
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/stator-rotor-core-group/stator-tie-bolt-head-2",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/stator-rotor-core-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.109,
        0.17200000000000001,
        1.334865011070615e-17,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/stator-rotor-core-group/stator-tie-bolt-head-2",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 30
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/stator-rotor-core-group/stator-tie-bolt-head-3",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/stator-rotor-core-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.0022975166059224e-17,
        0.17200000000000001,
        -0.109,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/stator-rotor-core-group/stator-tie-bolt-head-3",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 31
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.21400000000000002,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "hairpin-crown-group",
        "componentRole": "workpiece",
        "BOMqty": 1
      },
      "gltfNode": 32
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/slot-insulation-cuff-ring",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/slot-insulation-cuff-ring",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 33
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-braided-crown-ring",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.006,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-braided-crown-ring",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1
      },
      "gltfNode": 34
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-1",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.093,
        0.04,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-1",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 35
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-1",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.093,
        0.055,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-1",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 36
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-2",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9659258262890683,
        0,
        0.25881904510252074,
        0,
        0,
        1,
        0,
        0,
        -0.25881904510252074,
        0,
        0.9659258262890683,
        0,
        0.08983110184488335,
        0.04,
        0.024070171194534428,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-2",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 37
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-2",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9659258262890683,
        0,
        0.25881904510252074,
        0,
        0,
        1,
        0,
        0,
        -0.25881904510252074,
        0,
        0.9659258262890683,
        0,
        0.08983110184488335,
        0.055,
        0.024070171194534428,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-2",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 38
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-3",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.8660254037844387,
        0,
        0.49999999999999994,
        0,
        0,
        1,
        0,
        0,
        -0.49999999999999994,
        0,
        0.8660254037844387,
        0,
        0.0805403625519528,
        0.04,
        0.04649999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-3",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 39
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-3",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.8660254037844387,
        0,
        0.49999999999999994,
        0,
        0,
        1,
        0,
        0,
        -0.49999999999999994,
        0,
        0.8660254037844387,
        0,
        0.0805403625519528,
        0.055,
        0.04649999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-3",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 40
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-4",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.7071067811865475,
        0,
        0.7071067811865476,
        0,
        0,
        1,
        0,
        0,
        -0.7071067811865476,
        0,
        0.7071067811865475,
        0,
        0.06576093065034892,
        0.04,
        0.06576093065034891,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-4",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 41
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-4",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.7071067811865475,
        0,
        0.7071067811865476,
        0,
        0,
        1,
        0,
        0,
        -0.7071067811865476,
        0,
        0.7071067811865475,
        0,
        0.06576093065034892,
        0.055,
        0.06576093065034891,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-4",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 42
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-5",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5000000000000001,
        0,
        0.8660254037844386,
        0,
        0,
        1,
        0,
        0,
        -0.8660254037844386,
        0,
        0.5000000000000001,
        0,
        0.04650000000000001,
        0.04,
        0.0805403625519528,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-5",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 43
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-5",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5000000000000001,
        0,
        0.8660254037844386,
        0,
        0,
        1,
        0,
        0,
        -0.8660254037844386,
        0,
        0.5000000000000001,
        0,
        0.04650000000000001,
        0.055,
        0.0805403625519528,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-5",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 44
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-6",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.25881904510252074,
        0,
        0.9659258262890683,
        0,
        0,
        1,
        0,
        0,
        -0.9659258262890683,
        0,
        0.25881904510252074,
        0,
        0.024070171194534428,
        0.04,
        0.08983110184488335,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-6",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 45
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-6",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.25881904510252074,
        0,
        0.9659258262890683,
        0,
        0,
        1,
        0,
        0,
        -0.9659258262890683,
        0,
        0.25881904510252074,
        0,
        0.024070171194534428,
        0.055,
        0.08983110184488335,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-6",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 46
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-7",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        1,
        0,
        0,
        1,
        0,
        0,
        -1,
        0,
        2.220446049250313e-16,
        0,
        5.694607616035192e-18,
        0.04,
        0.093,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-7",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 47
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-7",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        1,
        0,
        0,
        1,
        0,
        0,
        -1,
        0,
        2.220446049250313e-16,
        0,
        5.694607616035192e-18,
        0.055,
        0.093,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-7",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 48
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-8",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.25881904510252074,
        0,
        0.9659258262890683,
        0,
        0,
        1,
        0,
        0,
        -0.9659258262890683,
        0,
        -0.25881904510252074,
        0,
        -0.024070171194534418,
        0.04,
        0.08983110184488335,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-8",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 49
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-8",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.25881904510252074,
        0,
        0.9659258262890683,
        0,
        0,
        1,
        0,
        0,
        -0.9659258262890683,
        0,
        -0.25881904510252074,
        0,
        -0.024070171194534418,
        0.055,
        0.08983110184488335,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-8",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 50
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-9",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.4999999999999998,
        0,
        0.8660254037844388,
        0,
        0,
        1,
        0,
        0,
        -0.8660254037844388,
        0,
        -0.4999999999999998,
        0,
        -0.04649999999999998,
        0.04,
        0.0805403625519528,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-9",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 51
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-9",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.4999999999999998,
        0,
        0.8660254037844388,
        0,
        0,
        1,
        0,
        0,
        -0.8660254037844388,
        0,
        -0.4999999999999998,
        0,
        -0.04649999999999998,
        0.055,
        0.0805403625519528,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-9",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 52
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-10",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.7071067811865475,
        0,
        0.7071067811865477,
        0,
        0,
        1,
        0,
        0,
        -0.7071067811865477,
        0,
        -0.7071067811865475,
        0,
        -0.06576093065034891,
        0.04,
        0.06576093065034892,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-10",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 53
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-10",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.7071067811865475,
        0,
        0.7071067811865477,
        0,
        0,
        1,
        0,
        0,
        -0.7071067811865477,
        0,
        -0.7071067811865475,
        0,
        -0.06576093065034891,
        0.055,
        0.06576093065034892,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-10",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 54
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-11",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.8660254037844388,
        0,
        0.49999999999999994,
        0,
        0,
        1,
        0,
        0,
        -0.49999999999999994,
        0,
        -0.8660254037844388,
        0,
        -0.0805403625519528,
        0.04,
        0.04649999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-11",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 55
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-11",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.8660254037844388,
        0,
        0.49999999999999994,
        0,
        0,
        1,
        0,
        0,
        -0.49999999999999994,
        0,
        -0.8660254037844388,
        0,
        -0.0805403625519528,
        0.055,
        0.04649999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-11",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 56
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-12",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.9659258262890682,
        0,
        0.258819045102521,
        0,
        0,
        1,
        0,
        0,
        -0.258819045102521,
        0,
        -0.9659258262890682,
        0,
        -0.08983110184488334,
        0.04,
        0.024070171194534456,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-12",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 57
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-12",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.9659258262890682,
        0,
        0.258819045102521,
        0,
        0,
        1,
        0,
        0,
        -0.258819045102521,
        0,
        -0.9659258262890682,
        0,
        -0.08983110184488334,
        0.055,
        0.024070171194534456,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-12",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 58
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-13",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -1,
        0,
        1.2246467991473532e-16,
        0,
        0,
        1,
        0,
        0,
        -1.2246467991473532e-16,
        0,
        -1,
        0,
        -0.093,
        0.04,
        1.1389215232070384e-17,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-13",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 59
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-13",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -1,
        0,
        1.2246467991473532e-16,
        0,
        0,
        1,
        0,
        0,
        -1.2246467991473532e-16,
        0,
        -1,
        0,
        -0.093,
        0.055,
        1.1389215232070384e-17,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-13",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 60
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-14",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.9659258262890682,
        0,
        -0.2588190451025208,
        0,
        0,
        1,
        0,
        0,
        0.2588190451025208,
        0,
        -0.9659258262890682,
        0,
        -0.08983110184488335,
        0.04,
        -0.024070171194534435,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-14",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 61
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-14",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.9659258262890682,
        0,
        -0.2588190451025208,
        0,
        0,
        1,
        0,
        0,
        0.2588190451025208,
        0,
        -0.9659258262890682,
        0,
        -0.08983110184488335,
        0.055,
        -0.024070171194534435,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-14",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 62
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-15",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.8660254037844388,
        0,
        -0.4999999999999998,
        0,
        0,
        1,
        0,
        0,
        0.4999999999999998,
        0,
        -0.8660254037844388,
        0,
        -0.08054036255195281,
        0.04,
        -0.04649999999999997,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-15",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 63
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-15",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.8660254037844388,
        0,
        -0.4999999999999998,
        0,
        0,
        1,
        0,
        0,
        0.4999999999999998,
        0,
        -0.8660254037844388,
        0,
        -0.08054036255195281,
        0.055,
        -0.04649999999999997,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-15",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 64
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-16",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.7071067811865479,
        0,
        -0.7071067811865471,
        0,
        0,
        1,
        0,
        0,
        0.7071067811865471,
        0,
        -0.7071067811865479,
        0,
        -0.06576093065034895,
        0.04,
        -0.06576093065034888,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-16",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 65
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-16",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.7071067811865479,
        0,
        -0.7071067811865471,
        0,
        0,
        1,
        0,
        0,
        0.7071067811865471,
        0,
        -0.7071067811865479,
        0,
        -0.06576093065034895,
        0.055,
        -0.06576093065034888,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-16",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 66
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-17",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.5000000000000002,
        0,
        -0.8660254037844384,
        0,
        0,
        1,
        0,
        0,
        0.8660254037844384,
        0,
        -0.5000000000000002,
        0,
        -0.04650000000000004,
        0.04,
        -0.08054036255195278,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-17",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 67
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-17",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.5000000000000002,
        0,
        -0.8660254037844384,
        0,
        0,
        1,
        0,
        0,
        0.8660254037844384,
        0,
        -0.5000000000000002,
        0,
        -0.04650000000000004,
        0.055,
        -0.08054036255195278,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-17",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 68
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-18",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.25881904510252074,
        0,
        -0.9659258262890683,
        0,
        0,
        1,
        0,
        0,
        0.9659258262890683,
        0,
        -0.25881904510252074,
        0,
        -0.024070171194534418,
        0.04,
        -0.08983110184488335,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-18",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 69
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-18",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.25881904510252074,
        0,
        -0.9659258262890683,
        0,
        0,
        1,
        0,
        0,
        0.9659258262890683,
        0,
        -0.25881904510252074,
        0,
        -0.024070171194534418,
        0.055,
        -0.08983110184488335,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-18",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 70
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-19",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -2.220446049250313e-16,
        0,
        -1,
        0,
        0,
        1,
        0,
        0,
        1,
        0,
        -2.220446049250313e-16,
        0,
        -1.7083822848105576e-17,
        0.04,
        -0.093,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-19",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 71
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-19",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -2.220446049250313e-16,
        0,
        -1,
        0,
        0,
        1,
        0,
        0,
        1,
        0,
        -2.220446049250313e-16,
        0,
        -1.7083822848105576e-17,
        0.055,
        -0.093,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-19",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 72
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-20",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.2588190451025202,
        0,
        -0.9659258262890685,
        0,
        0,
        1,
        0,
        0,
        0.9659258262890685,
        0,
        0.2588190451025202,
        0,
        0.024070171194534386,
        0.04,
        -0.08983110184488337,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-20",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 73
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-20",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.2588190451025202,
        0,
        -0.9659258262890685,
        0,
        0,
        1,
        0,
        0,
        0.9659258262890685,
        0,
        0.2588190451025202,
        0,
        0.024070171194534386,
        0.055,
        -0.08983110184488337,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-20",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 74
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-21",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5000000000000001,
        0,
        -0.8660254037844386,
        0,
        0,
        1,
        0,
        0,
        0.8660254037844386,
        0,
        0.5000000000000001,
        0,
        0.04650000000000001,
        0.04,
        -0.0805403625519528,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-21",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 75
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-21",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5000000000000001,
        0,
        -0.8660254037844386,
        0,
        0,
        1,
        0,
        0,
        0.8660254037844386,
        0,
        0.5000000000000001,
        0,
        0.04650000000000001,
        0.055,
        -0.0805403625519528,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-21",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 76
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-22",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.7071067811865474,
        0,
        -0.7071067811865477,
        0,
        0,
        1,
        0,
        0,
        0.7071067811865477,
        0,
        0.7071067811865474,
        0,
        0.06576093065034891,
        0.04,
        -0.06576093065034894,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-22",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 77
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-22",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.7071067811865474,
        0,
        -0.7071067811865477,
        0,
        0,
        1,
        0,
        0,
        0.7071067811865477,
        0,
        0.7071067811865474,
        0,
        0.06576093065034891,
        0.055,
        -0.06576093065034894,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-22",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 78
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-23",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.8660254037844384,
        0,
        -0.5000000000000004,
        0,
        0,
        1,
        0,
        0,
        0.5000000000000004,
        0,
        0.8660254037844384,
        0,
        0.08054036255195277,
        0.04,
        -0.04650000000000004,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-23",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 79
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-23",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.8660254037844384,
        0,
        -0.5000000000000004,
        0,
        0,
        1,
        0,
        0,
        0.5000000000000004,
        0,
        0.8660254037844384,
        0,
        0.08054036255195277,
        0.055,
        -0.04650000000000004,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-23",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 80
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-24",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9659258262890681,
        0,
        -0.2588190451025215,
        0,
        0,
        1,
        0,
        0,
        0.2588190451025215,
        0,
        0.9659258262890681,
        0,
        0.08983110184488333,
        0.04,
        -0.024070171194534504,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-arch-pin-24",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.015,
            "height": 0.024,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 81
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-24",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9659258262890681,
        0,
        -0.2588190451025215,
        0,
        0,
        1,
        0,
        0,
        0.2588190451025215,
        0,
        0.9659258262890681,
        0,
        0.08983110184488333,
        0.055,
        -0.024070171194534504,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/hairpin-weld-tip-24",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "workpiece",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.008,
            "depth": 0.005,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 82
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/phase-busbar-lug-U",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9063077870366499,
        0,
        0.42261826174069944,
        0,
        0,
        1,
        0,
        0,
        -0.42261826174069944,
        0,
        0.9063077870366499,
        0,
        -0.04057135312710715,
        0.047,
        0.0870055475555184,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/phase-busbar-lug-U",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "port",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.014,
            "height": 0.038,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 83
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/phase-busbar-lug-V",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.047,
        0.096,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/phase-busbar-lug-V",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "port",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.014,
            "height": 0.038,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 84
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/phase-busbar-lug-W",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9063077870366499,
        0,
        -0.42261826174069944,
        0,
        0,
        1,
        0,
        0,
        0.42261826174069944,
        0,
        0.9063077870366499,
        0,
        0.04057135312710715,
        0.047,
        0.0870055475555184,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/phase-busbar-lug-W",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "port",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.014,
            "height": 0.038,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 85
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group/p03-06-ev-hairpin-stator-rotor-puck:hairpin-crown-top-frame",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/hairpin-crown-group",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.066,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck:hairpin-crown-top-frame",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 86
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-left",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.14,
        0.044,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "puck-clamp-jaw-left",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 87
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-left/jaw-carrier-left",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-left",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.006,
        0.016,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-left/jaw-carrier-left",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "fastener",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.026,
            "height": 0.032,
            "depth": 0.034,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 88
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-left/jaw-contact-pad-left",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-left",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.01,
        0.018,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-left/jaw-contact-pad-left",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.028,
            "depth": 0.028,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 89
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-left/p03-06-ev-hairpin-stator-rotor-puck:puck-clamp-jaw-frame",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-left",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.024,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck:puck-clamp-jaw-frame",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 90
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-right",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.14,
        0.044,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "puck-clamp-jaw-right",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 91
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-right/jaw-carrier-right",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-right",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.006,
        0.016,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-right/jaw-carrier-right",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "fastener",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.026,
            "height": 0.032,
            "depth": 0.034,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 92
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-right/jaw-contact-pad-right",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-right",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.01,
        0.018,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-right/jaw-contact-pad-right",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.028,
            "depth": 0.028,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 93
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-rear",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.044,
        -0.14,
        1
      ],
      "sourceUserData": {
        "partId": "puck-clamp-jaw-rear",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 94
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-rear/jaw-carrier-rear",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-rear",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.016,
        -0.006,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-rear/jaw-carrier-rear",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "fastener",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.034,
            "height": 0.032,
            "depth": 0.026,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 95
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-rear/jaw-contact-pad-rear",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-rear",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.018,
        0.01,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/puck-clamp-jaw-rear/jaw-contact-pad-rear",
        "assetId": "p03-06-ev-hairpin-stator-rotor-puck",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.028,
            "height": 0.028,
            "depth": 0.008,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 96
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/p03-06-ev-hairpin-stator-rotor-puck:spindle-center-bore-frame",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.044,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck:spindle-center-bore-frame",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 97
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/p03-06-ev-hairpin-stator-rotor-puck:datum-bushing-FL",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.148,
        0,
        0.148,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck:datum-bushing-FL",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 98
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/p03-06-ev-hairpin-stator-rotor-puck:puck-grip-notch-left",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.168,
        0.02,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck:puck-grip-notch-left",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 99
    },
    {
      "id": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base/p03-06-ev-hairpin-stator-rotor-puck:puck-grip-notch-right",
      "parent": "p03-06-ev-hairpin-stator-rotor-puck/p03-06-ev-hairpin-stator-rotor-puck:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.168,
        0.02,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-06-ev-hairpin-stator-rotor-puck:puck-grip-notch-right",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 100
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "P03-06 패킷 설계 지침(원형 스핀들 이송 퍽, 적층 코어 및 중앙 샤프트 중공 보어 실제 수직 관통, 4코너 위치결정 부싱 관통홀, 구리 헤어핀 크라운 돌출 관절 hairpin_crown_lift, 퍽 클램프 관절 puck_clamp 및 정면 DS_Brand_Plate)에 따른 자체 설계 표시 모델."
    }
  ],
  "rights": {
    "id": "p03-06-ev-hairpin-stator-rotor-puck",
    "assetTypeId": "p03-06-ev-hairpin-stator-rotor-puck",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:4447983f1b76f8cd013d8bdcacc02cbc022a17a485ec23ee09fb9155607146cb",
    "modelSource": "kit/models/p03-06-ev-hairpin-stator-rotor-puck.mjs",
    "dslExampleSource": "dsl/models/p03-06-ev-hairpin-stator-rotor-puck.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/p03-06-ev-hairpin-stator-rotor-puck.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/p03-06-ev-hairpin-stator-rotor-puck.txt",
      "sha256": "sha256:df3a9cd2f55f3dd5055b06957d157dea2c1a89a2182f70465098346a625b52b2",
      "bytes": 817
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/p03-06-ev-hairpin-stator-rotor-puck/model.glb",
      "bytes": 1296084,
      "sha256": "sha256:27e8f45505b7e2e607bd3204c907d0af44e1a62a3a1be2c418746850a25b7c99"
    },
    "licenses": [
      {
        "path": "open-assets/p03-06-ev-hairpin-stator-rotor-puck/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/p03-06-ev-hairpin-stator-rotor-puck/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/p03-06-ev-hairpin-stator-rotor-puck/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/p03-06-ev-hairpin-stator-rotor-puck/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/p03-06-ev-hairpin-stator-rotor-puck/LICENSES/ASSET-NOTICES/p03-06-ev-hairpin-stator-rotor-puck.txt",
        "bytes": 817,
        "sha256": "sha256:df3a9cd2f55f3dd5055b06957d157dea2c1a89a2182f70465098346a625b52b2"
      }
    ],
    "source": {
      "path": "kit/models/p03-06-ev-hairpin-stator-rotor-puck.mjs",
      "bytes": 19985,
      "sha256": "sha256:4447983f1b76f8cd013d8bdcacc02cbc022a17a485ec23ee09fb9155607146cb"
    },
    "ds2": {
      "path": "dsl/models/p03-06-ev-hairpin-stator-rotor-puck.ds2",
      "bytes": 2867,
      "sha256": "sha256:f3bc97523483a31f5fb271b9fa07432a685b7d82cdd54b2fdeecec539601b2df",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 101,
    "triangles": 71112,
    "maxMatrixError": 3.3306690738754696e-16,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 11,
    "nodeComparisons": 1111,
    "semanticFrameComparisons": 77,
    "acceptanceCases": 4,
    "acceptanceFrameComparisons": 28,
    "maxMotionMatrixError": 3.3306690738754696e-16
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "p03-06-ev-hairpin-stator-rotor-puck",
    "kind": "part",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "P 공용 운반물 / P03 자동차 반제품",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [
      {
        "id": "stator_height",
        "type": "number",
        "unit": "m",
        "min": 0.14,
        "max": 0.2,
        "default": 0.17
      }
    ],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "center_bore": {
        "frameId": "spindle-center-bore-frame",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0.044,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "datum_pin": {
        "frameId": "datum-bushing-FL",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -0.148,
            0,
            0.148
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "grip_left": {
        "frameId": "puck-grip-notch-left",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -0.168,
            0.02,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "grip_right": {
        "frameId": "puck-grip-notch-right",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.168,
            0.02,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "hairpin_crown": {
        "frameId": "hairpin-crown-top-frame",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0.28,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "clamp_jaw": {
        "frameId": "puck-clamp-jaw-frame",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -0.14,
            0.068,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
