{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "p03-02-ev-skateboard-chassis-module",
  "assetTypeId": "p03-02-ev-skateboard-chassis-module",
  "label": "섀시 모듈",
  "category": "P 공용 운반물",
  "description": "자동차 의장 데킹(Decking)·AGV 결혼(Marriage) 스테이션·서브프레임 조립 셀에서 이송되는 전기차 스케이트보드 섀시 플랫폼 모듈(EV Skateboard Chassis & Powertrain Subframe Assembly on AGV Jig Pallet). AGV 도킹 핀 보어와 볼트 체결 관통홀이 실제 가공된 섀시 조립 캐리어 팔레트, 알루미늄 압출 사이드실(데킹 볼트 홀 실제 관통)과 크로스멤버로 구성된 중앙 하부 배터리 플로어 프레임, 전·후륜 서브프레임 크래들과 듀얼 e-Axle 구동 모터·감속기 하우징, 좌·우 맥퍼슨/멀티링크 서스펜션 너클·코일오버 스트럿·통풍식 브레이크 디스크 로터(휠 허브 중앙 보어 및 5홀 휠 볼트 홀 실제 관통, 전륜 조향 타이로드 각도 회전 관절 front_steer_angle) 및 캐리어 팔레트 전면 DS 브랜드 입체 명판을 갖춘 표시 모델.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -2.0999999046325684,
      -5.143516251462113e-17,
      -0.9199999991059303
    ],
    "max": [
      2.0999999046325684,
      0.8890000004321337,
      0.9312950000000001
    ]
  },
  "size": [
    4.199999809265137,
    0.8890000004321337,
    1.8512949991059304
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 45,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 3,
      "blindSocketHeads": 0,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 20,
    "warnings": [],
    "changedMeshes": 48,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 85528,
      "afterTriangles": 79480,
      "reachedTarget": true,
      "changedMeshes": 9,
      "changes": [
        {
          "meshes": [
            "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-crossmember-1",
            "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-crossmember-2",
            "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-crossmember-3",
            "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-crossmember-4",
            "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-crossmember-5"
          ],
          "radiusM": 0.002,
          "dimensionsM": [
            0.056,
            0.096,
            1.39
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/front-inverter-hv-cover",
            "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-inverter-hv-cover"
          ],
          "radiusM": 0.002,
          "dimensionsM": [
            0.18,
            0.016,
            0.12
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-front-brand-pad"
          ],
          "radiusM": 0.002,
          "dimensionsM": [
            0.54,
            0.132,
            0.006
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/hv-orange-busbar-channel"
          ],
          "radiusM": 0.002,
          "dimensionsM": [
            2.24,
            0.028,
            0.05
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        }
      ],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/p03-02-ev-skateboard-chassis-module.mjs",
    "sourceSha256": "sha256:e66d08358d49185e2ae4fba08d9871bbf157b2f65910f67c7098126ee8126350",
    "deliverySha256": "sha256:98614447523509d9314f1712a787adcdcf400b7457b2c302d3411b1dec283471",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:c849c7445fcaf95e8152347be868a4561c176633cd8e07e403a838b19f56fadc",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:c849c7445fcaf95e8152347be868a4561c176633cd8e07e403a838b19f56fadc",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [
    {
      "id": "rotor_radius",
      "type": "number",
      "unit": "m",
      "min": 0.16,
      "max": 0.21,
      "default": 0.185
    }
  ],
  "parameterValues": {
    "rotor_radius": 0.185
  },
  "joints": [
    {
      "id": "front_steer_angle",
      "label": "전륜 좌·우 조향 너클 및 타이로드 요크 회전 각도",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "unit": "rad",
      "min": -0.55,
      "max": 0.55,
      "initial": 0
    }
  ],
  "initialState": {
    "front_steer_angle": 0
  },
  "bindings": [
    {
      "id": "front_steer_angle",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        1.38,
        0.5,
        0.78
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL",
      "gltfNode": 111
    },
    {
      "id": "front_steer_angle",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        1.38,
        0.5,
        -0.78
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR",
      "gltfNode": 119
    },
    {
      "id": "front_steer_angle",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        1.2,
        0.48,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/steering-pinion-crank-group",
      "gltfNode": 126
    }
  ],
  "jointBindings": [
    {
      "id": "front_steer_angle",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        1.38,
        0.5,
        0.78
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL",
      "gltfNode": 111
    },
    {
      "id": "front_steer_angle",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        1.38,
        0.5,
        -0.78
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR",
      "gltfNode": 119
    },
    {
      "id": "front_steer_angle",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        1.2,
        0.48,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/steering-pinion-crank-group",
      "gltfNode": 126
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base",
      "nodeName": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "agv-docking-pin-FL": {
      "id": "agv-docking-pin-FL",
      "node": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/p03-02-ev-skateboard-chassis-module:agv-docking-pin-FL",
      "nodeName": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/p03-02-ev-skateboard-chassis-module:agv-docking-pin-FL",
      "gltfNode": 129,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.75,
        0,
        0.72,
        1
      ],
      "position": [
        1.75,
        0,
        0.72
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "agv-docking-pin-FR": {
      "id": "agv-docking-pin-FR",
      "node": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/p03-02-ev-skateboard-chassis-module:agv-docking-pin-FR",
      "nodeName": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/p03-02-ev-skateboard-chassis-module:agv-docking-pin-FR",
      "gltfNode": 130,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.75,
        0,
        -0.72,
        1
      ],
      "position": [
        1.75,
        0,
        -0.72
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "marriage-bolt-bore-FL": {
      "id": "marriage-bolt-bore-FL",
      "node": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/p03-02-ev-skateboard-chassis-module:marriage-bolt-bore-FL",
      "nodeName": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/p03-02-ev-skateboard-chassis-module:marriage-bolt-bore-FL",
      "gltfNode": 131,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.85,
        0.49,
        0.74,
        1
      ],
      "position": [
        0.85,
        0.49,
        0.74
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "rear-wheel-hub-RL": {
      "id": "rear-wheel-hub-RL",
      "node": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/p03-02-ev-skateboard-chassis-module:rear-wheel-hub-RL",
      "nodeName": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/p03-02-ev-skateboard-chassis-module:rear-wheel-hub-RL",
      "gltfNode": 132,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.38,
        0.5,
        0.84,
        1
      ],
      "position": [
        -1.38,
        0.5,
        0.84
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "front-wheel-hub-FL": {
      "id": "front-wheel-hub-FL",
      "node": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL/p03-02-ev-skateboard-chassis-module:front-wheel-hub-FL",
      "nodeName": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL/p03-02-ev-skateboard-chassis-module:front-wheel-hub-FL",
      "gltfNode": 117,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.38,
        0.5,
        0.8400000000000001,
        1
      ],
      "position": [
        1.38,
        0.5,
        0.8400000000000001
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "front-wheel-hub-FR": {
      "id": "front-wheel-hub-FR",
      "node": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR/p03-02-ev-skateboard-chassis-module:front-wheel-hub-FR",
      "nodeName": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR/p03-02-ev-skateboard-chassis-module:front-wheel-hub-FR",
      "gltfNode": 125,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.38,
        0.5,
        -0.8400000000000001,
        1
      ],
      "position": [
        1.38,
        0.5,
        -0.8400000000000001
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "tie-rod-arm-tip-FL": {
      "id": "tie-rod-arm-tip-FL",
      "node": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL/p03-02-ev-skateboard-chassis-module:tie-rod-arm-tip-FL",
      "nodeName": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL/p03-02-ev-skateboard-chassis-module:tie-rod-arm-tip-FL",
      "gltfNode": 118,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.22,
        0.48,
        0.78,
        1
      ],
      "position": [
        1.22,
        0.48,
        0.78
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    }
  },
  "ports": {
    "mount": "base",
    "agv_docking_pin_fl": "agv-docking-pin-FL",
    "agv_docking_pin_fr": "agv-docking-pin-FR",
    "marriage_bolt_fl": "marriage-bolt-bore-FL",
    "front_wheel_hub_fl": "front-wheel-hub-FL",
    "front_wheel_hub_fr": "front-wheel-hub-FR",
    "tie_rod_tip_fl": "tie-rod-arm-tip-FL",
    "rear_wheel_hub_rl": "rear-wheel-hub-RL"
  },
  "nodes": [
    {
      "id": "p03-02-ev-skateboard-chassis-module",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 45,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 3,
            "blindSocketHeads": 0,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 20,
          "warnings": [],
          "changedMeshes": 48,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 85528,
            "afterTriangles": 79480,
            "reachedTarget": true,
            "changedMeshes": 9,
            "changes": [
              {
                "meshes": [
                  "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-crossmember-1",
                  "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-crossmember-2",
                  "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-crossmember-3",
                  "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-crossmember-4",
                  "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-crossmember-5"
                ],
                "radiusM": 0.002,
                "dimensionsM": [
                  0.056,
                  0.096,
                  1.39
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/front-inverter-hv-cover",
                  "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-inverter-hv-cover"
                ],
                "radiusM": 0.002,
                "dimensionsM": [
                  0.18,
                  0.016,
                  0.12
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-front-brand-pad"
                ],
                "radiusM": 0.002,
                "dimensionsM": [
                  0.54,
                  0.132,
                  0.006
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/hv-orange-busbar-channel"
                ],
                "radiusM": 0.002,
                "dimensionsM": [
                  2.24,
                  0.028,
                  0.05
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              }
            ],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "p03-02-ev-skateboard-chassis-module",
          "coordinate_profile": "lib3d-world/1",
          "label": "전기차 스케이트보드 섀시 플랫폼 모듈",
          "category": "P 공용 운반물 / P03 자동차 반제품",
          "summary": "자동차 의장 데킹(Decking)·AGV 결혼(Marriage) 스테이션·서브프레임 조립 셀에서 이송되는 전기차 스케이트보드 섀시 플랫폼 모듈(EV Skateboard Chassis & Powertrain Subframe Assembly on AGV Jig Pallet). AGV 도킹 핀 보어와 볼트 체결 관통홀이 실제 가공된 섀시 조립 캐리어 팔레트, 알루미늄 압출 사이드실(데킹 볼트 홀 실제 관통)과 크로스멤버로 구성된 중앙 하부 배터리 플로어 프레임, 전·후륜 서브프레임 크래들과 듀얼 e-Axle 구동 모터·감속기 하우징, 좌·우 맥퍼슨/멀티링크 서스펜션 너클·코일오버 스트럿·통풍식 브레이크 디스크 로터(휠 허브 중앙 보어 및 5홀 휠 볼트 홀 실제 관통, 전륜 조향 타이로드 각도 회전 관절 front_steer_angle) 및 캐리어 팔레트 전면 DS 브랜드 입체 명판을 갖춘 표시 모델.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [
            {
              "id": "rotor_radius",
              "type": "number",
              "unit": "m",
              "min": 0.16,
              "max": 0.21,
              "default": 0.185
            }
          ],
          "joints": [
            {
              "id": "front_steer_angle",
              "label": "전륜 좌·우 조향 너클 및 타이로드 요크 회전 각도",
              "kind": "revolute",
              "axis": [
                0,
                1,
                0
              ],
              "unit": "rad",
              "min": -0.55,
              "max": 0.55,
              "initial": 0
            }
          ],
          "ports": {
            "mount": "base",
            "agv_docking_pin_fl": "agv-docking-pin-FL",
            "agv_docking_pin_fr": "agv-docking-pin-FR",
            "marriage_bolt_fl": "marriage-bolt-bore-FL",
            "front_wheel_hub_fl": "front-wheel-hub-FL",
            "front_wheel_hub_fr": "front-wheel-hub-FR",
            "tie_rod_tip_fl": "tie-rod-arm-tip-FL",
            "rear_wheel_hub_rl": "rear-wheel-hub-RL"
          },
          "required_host_features": [
            "revolute"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "P03-02 패킷 설계 지침(AGV 도킹 핀 보어·볼트 체결 관통홀 섀시 조립 캐리어 팔레트, 알루미늄 압출 사이드실·크로스멤버 중앙 하부 배터리 플로어 프레임, 전·후륜 서브프레임 크래들·듀얼 e-Axle 구동 모터/감속기, 맥퍼슨/멀티링크 서스펜션 너클·코일오버 스트럿·휠 허브 중앙 보어 및 볼트 홀 실제 관통 통풍식 브레이크 디스크 로터, 전륜 조향 타이로드 각도 회전 관절 및 전면 DS_Brand_Plate 명판)에 따른 자체 설계 표시 모델."
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {
          "rotor_radius": 0.185
        },
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base",
          "agv-docking-pin-FL": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/p03-02-ev-skateboard-chassis-module:agv-docking-pin-FL",
          "agv-docking-pin-FR": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/p03-02-ev-skateboard-chassis-module:agv-docking-pin-FR",
          "marriage-bolt-bore-FL": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/p03-02-ev-skateboard-chassis-module:marriage-bolt-bore-FL",
          "rear-wheel-hub-RL": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/p03-02-ev-skateboard-chassis-module:rear-wheel-hub-RL",
          "front-wheel-hub-FL": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL/p03-02-ev-skateboard-chassis-module:front-wheel-hub-FL",
          "front-wheel-hub-FR": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR/p03-02-ev-skateboard-chassis-module:front-wheel-hub-FR",
          "tie-rod-arm-tip-FL": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL/p03-02-ev-skateboard-chassis-module:tie-rod-arm-tip-FL"
        },
        "jointBindings": [
          {
            "id": "front_steer_angle",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              1.38,
              0.5,
              0.78
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL"
          },
          {
            "id": "front_steer_angle",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              1.38,
              0.5,
              -0.78
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR"
          },
          {
            "id": "front_steer_angle",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              1.2,
              0.48,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/steering-pinion-crank-group"
          }
        ],
        "joints": [
          {
            "id": "front_steer_angle",
            "label": "전륜 좌·우 조향 너클 및 타이로드 요크 회전 각도",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "unit": "rad",
            "min": -0.55,
            "max": 0.55,
            "initial": 0,
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 35
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "P03-02 패킷 설계 지침(AGV 도킹 핀 보어·볼트 체결 관통홀 섀시 조립 캐리어 팔레트, 알루미늄 압출 사이드실·크로스멤버 중앙 하부 배터리 플로어 프레임, 전·후륜 서브프레임 크래들·듀얼 e-Axle 구동 모터/감속기, 맥퍼슨/멀티링크 서스펜션 너클·코일오버 스트럿·휠 허브 중앙 보어 및 볼트 홀 실제 관통 통풍식 브레이크 디스크 로터, 전륜 조향 타이로드 각도 회전 관절 및 전면 DS_Brand_Plate 명판)에 따른 자체 설계 표시 모델."
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "front_steer_angle": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base",
      "parent": "p03-02-ev-skateboard-chassis-module",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module:base",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 1
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "agv-carrier-pallet-group",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 2
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-docking-base-plate",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-docking-base-plate",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 3
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-docking-bushing-FL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.75,
        0.036,
        0.72,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-docking-bushing-FL",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 4
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-docking-bushing-FR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.75,
        0.036,
        -0.72,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-docking-bushing-FR",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 5
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-docking-bushing-RL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.75,
        0.036,
        0.72,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-docking-bushing-RL",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 6
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-docking-bushing-RR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.75,
        0.036,
        -0.72,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-docking-bushing-RR",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 7
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-side-skirt-front",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.88,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-side-skirt-front",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 8
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-side-skirt-rear",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.88,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-side-skirt-rear",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 9
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-jig-stanchion-FL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.38,
        0.208,
        0.46,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-jig-stanchion-FL",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.085,
            "height": 0.344,
            "depth": 0.085,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 10
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-jig-stanchion-FR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.38,
        0.208,
        -0.46,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-jig-stanchion-FR",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.085,
            "height": 0.344,
            "depth": 0.085,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 11
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-jig-stanchion-CL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.208,
        0.54,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-jig-stanchion-CL",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.085,
            "height": 0.344,
            "depth": 0.085,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 12
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-jig-stanchion-CR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.208,
        -0.54,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-jig-stanchion-CR",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.085,
            "height": 0.344,
            "depth": 0.085,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 13
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-jig-stanchion-RL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.38,
        0.208,
        0.46,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-jig-stanchion-RL",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.085,
            "height": 0.344,
            "depth": 0.085,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 14
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-jig-stanchion-RR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.38,
        0.208,
        -0.46,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-jig-stanchion-RR",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.085,
            "height": 0.344,
            "depth": 0.085,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 15
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-front-brand-pad",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.075,
        0.921,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/pallet-front-brand-pad",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.54,
            "height": 0.132,
            "depth": 0.006,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 16
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.075,
        0.926,
        1
      ],
      "sourceUserData": {
        "partId": "DS_Brand_Plate",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 17
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate/badge-bezel",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate/badge-bezel",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 18
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate/badge-backing",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate/badge-backing",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 19
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate/badge-rivet-0",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.23086,
        -0.038860000000000006,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate/badge-rivet-0",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 20
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate/badge-rivet-1",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.23086,
        0.038860000000000006,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate/badge-rivet-1",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 21
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate/badge-rivet-2",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.23086,
        -0.038860000000000006,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate/badge-rivet-2",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 22
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate/badge-rivet-3",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.23086,
        0.038860000000000006,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate/badge-rivet-3",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 23
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate/badge-D",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.06727999999999999,
        0,
        0,
        0,
        0,
        0.06727999999999999,
        0,
        0,
        0,
        0,
        0.0027,
        0,
        -0.029603199999999996,
        0,
        0.002595,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate/badge-D",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 24
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate/badge-S",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.06727999999999999,
        0,
        0,
        0,
        0,
        0.06727999999999999,
        0,
        0,
        0,
        0,
        0.0027,
        0,
        0.029603199999999996,
        0,
        0.002595,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate/badge-S",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 25
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate/badge-D-back",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.06727999999999999,
        0,
        -8.239423664663392e-18,
        0,
        0,
        0.06727999999999999,
        0,
        0,
        3.3065463576978538e-19,
        0,
        -0.0027,
        0,
        0.029603199999999996,
        0,
        -0.002595,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate/badge-D-back",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 26
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate/badge-S-back",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.06727999999999999,
        0,
        -8.239423664663392e-18,
        0,
        0,
        0.06727999999999999,
        0,
        0,
        3.3065463576978538e-19,
        0,
        -0.0027,
        0,
        -0.029603199999999996,
        0,
        -0.002595,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/agv-carrier-pallet-group/DS_Brand_Plate/badge-S-back",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 27
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "ev-battery-floor-frame-group",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 28
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-side-sill-L",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.38,
        0.74,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-side-sill-L",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 29
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-side-sill-R",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.38,
        -0.74,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-side-sill-R",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 30
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-undertray-pan",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.392,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-undertray-pan",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 2.08,
            "height": 0.024,
            "depth": 1.39,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 31
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-crossmember-1",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.96,
        0.44,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-crossmember-1",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.056,
            "height": 0.096,
            "depth": 1.39,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 32
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-crossmember-2",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.48,
        0.44,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-crossmember-2",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.056,
            "height": 0.096,
            "depth": 1.39,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 33
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-crossmember-3",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.44,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-crossmember-3",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.056,
            "height": 0.096,
            "depth": 1.39,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 34
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-crossmember-4",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.48,
        0.44,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-crossmember-4",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.056,
            "height": 0.096,
            "depth": 1.39,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 35
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-crossmember-5",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.96,
        0.44,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-crossmember-5",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.056,
            "height": 0.096,
            "depth": 1.39,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 36
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-cell-module-L-1",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.72,
        0.448,
        0.33,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-cell-module-L-1",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.39,
            "height": 0.088,
            "depth": 0.62,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 37
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-cell-module-R-1",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.72,
        0.448,
        -0.33,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-cell-module-R-1",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.39,
            "height": 0.088,
            "depth": 0.62,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 38
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-cell-module-L-2",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.24,
        0.448,
        0.33,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-cell-module-L-2",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.39,
            "height": 0.088,
            "depth": 0.62,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 39
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-cell-module-R-2",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.24,
        0.448,
        -0.33,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-cell-module-R-2",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.39,
            "height": 0.088,
            "depth": 0.62,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 40
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-cell-module-L-3",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.24,
        0.448,
        0.33,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-cell-module-L-3",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.39,
            "height": 0.088,
            "depth": 0.62,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 41
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-cell-module-R-3",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.24,
        0.448,
        -0.33,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-cell-module-R-3",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.39,
            "height": 0.088,
            "depth": 0.62,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 42
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-cell-module-L-4",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.72,
        0.448,
        0.33,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-cell-module-L-4",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.39,
            "height": 0.088,
            "depth": 0.62,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 43
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-cell-module-R-4",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.72,
        0.448,
        -0.33,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/battery-cell-module-R-4",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.39,
            "height": 0.088,
            "depth": 0.62,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 44
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/hv-orange-busbar-channel",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.504,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/hv-orange-busbar-channel",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 2.24,
            "height": 0.028,
            "depth": 0.05,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 45
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/hv-front-connector-plug",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        1.14,
        0.504,
        0.12,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-battery-floor-frame-group/hv-front-connector-plug",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.024,
            "topRadius": 0.024,
            "height": 0.12,
            "radialSegments": 24,
            "chamfer": 0.0008400000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 46
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "ev-subframe-powertrain-group",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 47
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/front-subframe-crossbeam",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.38,
        0.41,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/front-subframe-crossbeam",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.38,
            "height": 0.065,
            "depth": 1.12,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 48
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/front-subframe-arm-L",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.38,
        0.415,
        0.52,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/front-subframe-arm-L",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.54,
            "height": 0.055,
            "depth": 0.08,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 49
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/front-subframe-arm-R",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.38,
        0.415,
        -0.52,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/front-subframe-arm-R",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.54,
            "height": 0.055,
            "depth": 0.08,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 50
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/front-eaxle-motor-housing",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.38,
        0.495,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/front-eaxle-motor-housing",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.145,
            "topRadius": 0.145,
            "height": 0.42,
            "radialSegments": 24,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 51
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/front-eaxle-gearbox-housing",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.3399999999999999,
        0.495,
        0.14,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/front-eaxle-gearbox-housing",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "motor",
        "BOMqty": 1
      },
      "gltfNode": 52
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/front-eaxle-inverter-unit",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.38,
        0.655,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/front-eaxle-inverter-unit",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.26,
            "height": 0.07,
            "depth": 0.32,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 53
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/front-inverter-hv-cover",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.38,
        0.695,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/front-inverter-hv-cover",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.016,
            "depth": 0.12,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 54
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/front-cv-halfshaft-L",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.38,
        0.5,
        0.42,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/front-cv-halfshaft-L",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 55
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/front-cv-halfshaft-R",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.38,
        0.5,
        -0.42,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/front-cv-halfshaft-R",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 56
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/lower-control-arm-FL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.38,
        0.425,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/lower-control-arm-FL",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.032,
            "depth": 0.3,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 57
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/strut-damper-tube-FL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.38,
        0.69,
        0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/strut-damper-tube-FL",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 58
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/strut-top-mount-FL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.38,
        0.875,
        0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/strut-top-mount-FL",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 59
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-FL-1",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.38,
        0.62,
        0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-FL-1",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 60
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-FL-2",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.38,
        0.665,
        0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-FL-2",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 61
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-FL-3",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.38,
        0.71,
        0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-FL-3",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 62
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-FL-4",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.38,
        0.755,
        0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-FL-4",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 63
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-FL-5",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.38,
        0.8,
        0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-FL-5",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 64
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/lower-control-arm-FR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.38,
        0.425,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/lower-control-arm-FR",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.032,
            "depth": 0.3,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 65
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/strut-damper-tube-FR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.38,
        0.69,
        -0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/strut-damper-tube-FR",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 66
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/strut-top-mount-FR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.38,
        0.875,
        -0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/strut-top-mount-FR",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 67
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-FR-1",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.38,
        0.62,
        -0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-FR-1",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 68
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-FR-2",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.38,
        0.665,
        -0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-FR-2",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 69
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-FR-3",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.38,
        0.71,
        -0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-FR-3",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 70
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-FR-4",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.38,
        0.755,
        -0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-FR-4",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 71
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-FR-5",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.38,
        0.8,
        -0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-FR-5",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 72
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-subframe-crossbeam",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.38,
        0.41,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-subframe-crossbeam",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.38,
            "height": 0.065,
            "depth": 1.12,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 73
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-subframe-arm-L",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.38,
        0.415,
        0.52,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-subframe-arm-L",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.54,
            "height": 0.055,
            "depth": 0.08,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 74
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-subframe-arm-R",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.38,
        0.415,
        -0.52,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-subframe-arm-R",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.54,
            "height": 0.055,
            "depth": 0.08,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 75
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-eaxle-motor-housing",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.38,
        0.495,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-eaxle-motor-housing",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.145,
            "topRadius": 0.145,
            "height": 0.42,
            "radialSegments": 24,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 76
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-eaxle-gearbox-housing",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.3399999999999999,
        0.495,
        0.14,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-eaxle-gearbox-housing",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "motor",
        "BOMqty": 1
      },
      "gltfNode": 77
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-eaxle-inverter-unit",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.38,
        0.655,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-eaxle-inverter-unit",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.26,
            "height": 0.07,
            "depth": 0.32,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 78
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-inverter-hv-cover",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.38,
        0.695,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-inverter-hv-cover",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.016,
            "depth": 0.12,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 79
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-cv-halfshaft-L",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.38,
        0.5,
        0.42,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-cv-halfshaft-L",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 80
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-cv-halfshaft-R",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.38,
        0.5,
        -0.42,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-cv-halfshaft-R",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 81
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/lower-control-arm-RL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.38,
        0.425,
        0.6,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/lower-control-arm-RL",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.032,
            "depth": 0.3,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 82
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/strut-damper-tube-RL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.38,
        0.69,
        0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/strut-damper-tube-RL",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 83
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/strut-top-mount-RL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.38,
        0.875,
        0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/strut-top-mount-RL",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 84
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-RL-1",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.38,
        0.62,
        0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-RL-1",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 85
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-RL-2",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.38,
        0.665,
        0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-RL-2",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 86
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-RL-3",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.38,
        0.71,
        0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-RL-3",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 87
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-RL-4",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.38,
        0.755,
        0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-RL-4",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 88
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-RL-5",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.38,
        0.8,
        0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-RL-5",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 89
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/lower-control-arm-RR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.38,
        0.425,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/lower-control-arm-RR",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.032,
            "depth": 0.3,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 90
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/strut-damper-tube-RR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.38,
        0.69,
        -0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/strut-damper-tube-RR",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 91
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/strut-top-mount-RR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.38,
        0.875,
        -0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/strut-top-mount-RR",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 92
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-RR-1",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.38,
        0.62,
        -0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-RR-1",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 93
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-RR-2",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.38,
        0.665,
        -0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-RR-2",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 94
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-RR-3",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.38,
        0.71,
        -0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-RR-3",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 95
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-RR-4",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.38,
        0.755,
        -0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-RR-4",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 96
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-RR-5",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.38,
        0.8,
        -0.64,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/coil-spring-ring-RR-5",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 97
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.38,
        0.5,
        0.78,
        1
      ],
      "sourceUserData": {
        "partId": "rear-knuckle-fixed-RL",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 98
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RL/suspension-knuckle-ring-RL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RL",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.02,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RL/suspension-knuckle-ring-RL",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "bearing",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 99
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RL/wheel-hub-rotor-RL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RL",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.02,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RL/wheel-hub-rotor-RL",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 100
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RL/brake-caliper-RL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RL",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.135,
        0.065,
        0.02,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RL/brake-caliper-RL",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.095,
            "height": 0.14,
            "depth": 0.088,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 101
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RL/knuckle-tierod-arm-RL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RL",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09,
        -0.02,
        -0.02,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RL/knuckle-tierod-arm-RL",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.028,
            "depth": 0.032,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 102
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RL/tierod-balljoint-stud-RL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RL",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.16,
        -0.02,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RL/tierod-balljoint-stud-RL",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 103
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.38,
        0.5,
        -0.78,
        1
      ],
      "sourceUserData": {
        "partId": "rear-knuckle-fixed-RR",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 104
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RR/suspension-knuckle-ring-RR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RR",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.02,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RR/suspension-knuckle-ring-RR",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "bearing",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 105
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RR/wheel-hub-rotor-RR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RR",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.02,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RR/wheel-hub-rotor-RR",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 106
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RR/brake-caliper-RR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RR",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.135,
        0.065,
        -0.02,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RR/brake-caliper-RR",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.095,
            "height": 0.14,
            "depth": 0.088,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 107
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RR/knuckle-tierod-arm-RR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RR",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09,
        -0.02,
        0.02,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RR/knuckle-tierod-arm-RR",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.028,
            "depth": 0.032,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 108
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RR/tierod-balljoint-stud-RR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RR",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.16,
        -0.02,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/rear-knuckle-fixed-RR/tierod-balljoint-stud-RR",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 109
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/eps-steering-rack-housing",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.2,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/ev-subframe-powertrain-group/eps-steering-rack-housing",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 110
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.38,
        0.5,
        0.78,
        1
      ],
      "sourceUserData": {
        "partId": "front-knuckle-steer-FL",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 111
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL/suspension-knuckle-ring-FL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.02,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL/suspension-knuckle-ring-FL",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "bearing",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 112
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL/wheel-hub-rotor-FL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.02,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL/wheel-hub-rotor-FL",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 113
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL/brake-caliper-FL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.135,
        0.065,
        0.02,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL/brake-caliper-FL",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.095,
            "height": 0.14,
            "depth": 0.088,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 114
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL/knuckle-tierod-arm-FL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09,
        -0.02,
        -0.02,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL/knuckle-tierod-arm-FL",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.028,
            "depth": 0.032,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 115
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL/tierod-balljoint-stud-FL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.16,
        -0.02,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL/tierod-balljoint-stud-FL",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 116
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL/p03-02-ev-skateboard-chassis-module:front-wheel-hub-FL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.06,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module:front-wheel-hub-FL",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 117
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL/p03-02-ev-skateboard-chassis-module:tie-rod-arm-tip-FL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FL",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.16,
        -0.02,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module:tie-rod-arm-tip-FL",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 118
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.38,
        0.5,
        -0.78,
        1
      ],
      "sourceUserData": {
        "partId": "front-knuckle-steer-FR",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 119
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR/suspension-knuckle-ring-FR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.02,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR/suspension-knuckle-ring-FR",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "bearing",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 120
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR/wheel-hub-rotor-FR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.02,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR/wheel-hub-rotor-FR",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 121
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR/brake-caliper-FR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.135,
        0.065,
        -0.02,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR/brake-caliper-FR",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.095,
            "height": 0.14,
            "depth": 0.088,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 122
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR/knuckle-tierod-arm-FR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09,
        -0.02,
        0.02,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR/knuckle-tierod-arm-FR",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.028,
            "depth": 0.032,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 123
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR/tierod-balljoint-stud-FR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.16,
        -0.02,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR/tierod-balljoint-stud-FR",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 124
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR/p03-02-ev-skateboard-chassis-module:front-wheel-hub-FR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/front-knuckle-steer-FR",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.06,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module:front-wheel-hub-FR",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 125
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/steering-pinion-crank-group",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.2,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "steering-pinion-crank-group",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 126
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/steering-pinion-crank-group/steering-pinion-shaft",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/steering-pinion-crank-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.035,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/steering-pinion-crank-group/steering-pinion-shaft",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 127
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/steering-pinion-crank-group/steering-tie-rod-yoke-bar",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/steering-pinion-crank-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/steering-pinion-crank-group/steering-tie-rod-yoke-bar",
        "assetId": "p03-02-ev-skateboard-chassis-module",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.048,
            "height": 0.028,
            "depth": 0.42,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 128
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/p03-02-ev-skateboard-chassis-module:agv-docking-pin-FL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.75,
        0,
        0.72,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module:agv-docking-pin-FL",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 129
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/p03-02-ev-skateboard-chassis-module:agv-docking-pin-FR",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.75,
        0,
        -0.72,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module:agv-docking-pin-FR",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 130
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/p03-02-ev-skateboard-chassis-module:marriage-bolt-bore-FL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.85,
        0.49,
        0.74,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module:marriage-bolt-bore-FL",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 131
    },
    {
      "id": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base/p03-02-ev-skateboard-chassis-module:rear-wheel-hub-RL",
      "parent": "p03-02-ev-skateboard-chassis-module/p03-02-ev-skateboard-chassis-module:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.38,
        0.5,
        0.84,
        1
      ],
      "sourceUserData": {
        "partId": "p03-02-ev-skateboard-chassis-module:rear-wheel-hub-RL",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 132
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "P03-02 패킷 설계 지침(AGV 도킹 핀 보어·볼트 체결 관통홀 섀시 조립 캐리어 팔레트, 알루미늄 압출 사이드실·크로스멤버 중앙 하부 배터리 플로어 프레임, 전·후륜 서브프레임 크래들·듀얼 e-Axle 구동 모터/감속기, 맥퍼슨/멀티링크 서스펜션 너클·코일오버 스트럿·휠 허브 중앙 보어 및 볼트 홀 실제 관통 통풍식 브레이크 디스크 로터, 전륜 조향 타이로드 각도 회전 관절 및 전면 DS_Brand_Plate 명판)에 따른 자체 설계 표시 모델."
    }
  ],
  "rights": {
    "id": "p03-02-ev-skateboard-chassis-module",
    "assetTypeId": "p03-02-ev-skateboard-chassis-module",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:e66d08358d49185e2ae4fba08d9871bbf157b2f65910f67c7098126ee8126350",
    "modelSource": "kit/models/p03-02-ev-skateboard-chassis-module.mjs",
    "dslExampleSource": "dsl/models/p03-02-ev-skateboard-chassis-module.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/p03-02-ev-skateboard-chassis-module.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/p03-02-ev-skateboard-chassis-module.txt",
      "sha256": "sha256:f46521b0bb1eb0c15b731ce8ba23a23b2b9e695d39a72993e51d1b2308f8b928",
      "bytes": 817
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/p03-02-ev-skateboard-chassis-module/model.glb",
      "bytes": 1251400,
      "sha256": "sha256:d8ff31fac67ef16a8d08e3ee3b974fe5610f57da32bfacaf580045fa66a2cb0d"
    },
    "licenses": [
      {
        "path": "open-assets/p03-02-ev-skateboard-chassis-module/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/p03-02-ev-skateboard-chassis-module/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/p03-02-ev-skateboard-chassis-module/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/p03-02-ev-skateboard-chassis-module/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/p03-02-ev-skateboard-chassis-module/LICENSES/ASSET-NOTICES/p03-02-ev-skateboard-chassis-module.txt",
        "bytes": 817,
        "sha256": "sha256:f46521b0bb1eb0c15b731ce8ba23a23b2b9e695d39a72993e51d1b2308f8b928"
      }
    ],
    "source": {
      "path": "kit/models/p03-02-ev-skateboard-chassis-module.mjs",
      "bytes": 28551,
      "sha256": "sha256:98614447523509d9314f1712a787adcdcf400b7457b2c302d3411b1dec283471"
    },
    "ds2": {
      "path": "dsl/models/p03-02-ev-skateboard-chassis-module.ds2",
      "bytes": 1914,
      "sha256": "sha256:93157fc0d19d9195fc9f75eddbc0cbb0645d0ad495dc15512592a589883280ed",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 133,
    "triangles": 79480,
    "maxMatrixError": 1.5407439555097887e-33,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 9,
    "nodeComparisons": 1197,
    "semanticFrameComparisons": 72,
    "acceptanceCases": 4,
    "acceptanceFrameComparisons": 32,
    "maxMotionMatrixError": 1.5407439555097887e-33
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "p03-02-ev-skateboard-chassis-module",
    "kind": "part",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "P 공용 운반물 / P03 자동차 반제품",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [
      {
        "id": "rotor_radius",
        "type": "number",
        "unit": "m",
        "min": 0.16,
        "max": 0.21,
        "default": 0.185
      }
    ],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "agv_docking_pin_fl": {
        "frameId": "agv-docking-pin-FL",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            1.75,
            0,
            0.72
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "agv_docking_pin_fr": {
        "frameId": "agv-docking-pin-FR",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            1.75,
            0,
            -0.72
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "marriage_bolt_fl": {
        "frameId": "marriage-bolt-bore-FL",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.85,
            0.49,
            0.74
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "front_wheel_hub_fl": {
        "frameId": "front-wheel-hub-FL",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            1.38,
            0.5,
            0.8400000000000001
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "front_wheel_hub_fr": {
        "frameId": "front-wheel-hub-FR",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            1.38,
            0.5,
            -0.8400000000000001
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "tie_rod_tip_fl": {
        "frameId": "tie-rod-arm-tip-FL",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            1.22,
            0.48,
            0.78
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "rear_wheel_hub_rl": {
        "frameId": "rear-wheel-hub-RL",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -1.38,
            0.5,
            0.84
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
