{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "o03-02-submersible-mixer",
  "assetTypeId": "o03-02-submersible-mixer",
  "label": "수중 교반기",
  "category": "O 수처리와 환경",
  "description": "무산소조·혐기조 수중 사각 가이드 마스트를 따라 승강 설치되며 스테인리스 방수 수중 모터와 3엽 바나나형 프로펠러로 슬러지 침전을 방지하고 혼합하는 가이드 레일형 수중 교반기. 바닥 및 상단 벽체 앵커 관통홀 브래킷, 상단 다윗 호이스트 지브 크레인 암, 사각 가이드 레일을 감싸는 중공 가이드 클로 브래킷 및 수직 승강 스트로크 관절(mixer_hoist_lift), 제트 유도 링 슈라우드 중공 보어 및 3엽 프로펠러 회전 관절(propeller_spin_angle), 인양 체인·수중 케이블 및 상단 프레임 DS 브랜드 입체 명판 모델.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -0.6,
      -1.1021821838702633e-17,
      -0.25999999046325684
    ],
    "max": [
      0.6000000014901161,
      3.030000002384186,
      0.25999999046325684
    ]
  },
  "size": [
    1.2000000014901162,
    3.030000002384186,
    0.5199999809265137
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 13,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 9,
      "blindSocketHeads": 8,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 2,
    "warnings": [],
    "changedMeshes": 30,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 18488,
      "afterTriangles": 18488,
      "reachedTarget": true,
      "changedMeshes": 0,
      "changes": [],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/o03-02-submersible-mixer.mjs",
    "sourceSha256": "sha256:1b8f7ba60e41913fcbedf9a4aacc2c1ca4641dfa0e72d9de8874fc6da584049b",
    "deliverySha256": "sha256:7392c1c04d5f079fc579c8700245600a49835e50031d43e4579986c8dfb57bd6",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:08df35bd51b8ff888976e1b46c04df9cff16534435f5ff4a5bb49422e3f06b71",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:08df35bd51b8ff888976e1b46c04df9cff16534435f5ff4a5bb49422e3f06b71",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [],
  "parameterValues": {},
  "joints": [
    {
      "id": "mixer_hoist_lift",
      "label": "가이드 레일 수중 교반기 수직 승강 스트로크",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "unit": "m",
      "min": 0,
      "max": 1.1,
      "initial": 0
    },
    {
      "id": "propeller_spin_angle",
      "label": "3엽 바나나형 프로펠러 회전",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "unit": "rad",
      "min": -6.283185307179586,
      "max": 6.283185307179586,
      "initial": 0
    }
  ],
  "initialState": {
    "mixer_hoist_lift": 0,
    "propeller_spin_angle": 0
  },
  "bindings": [
    {
      "id": "mixer_hoist_lift",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.72,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "gltfNode": 27
    },
    {
      "id": "propeller_spin_angle",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0.48,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/propeller-rotor-group",
      "gltfNode": 50
    }
  ],
  "jointBindings": [
    {
      "id": "mixer_hoist_lift",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.72,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "gltfNode": 27
    },
    {
      "id": "propeller_spin_angle",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0.48,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/propeller-rotor-group",
      "gltfNode": 50
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "o03-02-submersible-mixer/o03-02-submersible-mixer:base",
      "nodeName": "o03-02-submersible-mixer/o03-02-submersible-mixer:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "mixer-carriage-center": {
      "id": "mixer-carriage-center",
      "node": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/o03-02-submersible-mixer:mixer-carriage-center",
      "nodeName": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/o03-02-submersible-mixer:mixer-carriage-center",
      "gltfNode": 40,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.08,
        0.72,
        0,
        1
      ],
      "position": [
        0.08,
        0.72,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "jet-discharge-port": {
      "id": "jet-discharge-port",
      "node": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/o03-02-submersible-mixer:jet-discharge-port",
      "nodeName": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/o03-02-submersible-mixer:jet-discharge-port",
      "gltfNode": 41,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.62,
        0.72,
        0,
        1
      ],
      "position": [
        0.62,
        0.72,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "propeller-blade-tip": {
      "id": "propeller-blade-tip",
      "node": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/propeller-rotor-group/o03-02-submersible-mixer:propeller-blade-tip",
      "nodeName": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/propeller-rotor-group/o03-02-submersible-mixer:propeller-blade-tip",
      "gltfNode": 55,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.5,
        0.9299999999999999,
        0,
        1
      ],
      "position": [
        0.5,
        0.9299999999999999,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "upper-wall-mount": {
      "id": "upper-wall-mount",
      "node": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/o03-02-submersible-mixer:upper-wall-mount",
      "nodeName": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/o03-02-submersible-mixer:upper-wall-mount",
      "gltfNode": 56,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.6,
        2.28,
        0,
        1
      ],
      "position": [
        -0.6,
        2.28,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "hoist-hook-point": {
      "id": "hoist-hook-point",
      "node": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/o03-02-submersible-mixer:hoist-hook-point",
      "nodeName": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/o03-02-submersible-mixer:hoist-hook-point",
      "gltfNode": 57,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.18,
        2.86,
        0,
        1
      ],
      "position": [
        0.18,
        2.86,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    }
  },
  "ports": {
    "mount": "base",
    "wall_mount": "upper-wall-mount",
    "discharge": "jet-discharge-port",
    "hoist_hook": "hoist-hook-point",
    "carriage": "mixer-carriage-center",
    "propeller_tip": "propeller-blade-tip"
  },
  "nodes": [
    {
      "id": "o03-02-submersible-mixer",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "o03-02-submersible-mixer",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 13,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 9,
            "blindSocketHeads": 8,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 2,
          "warnings": [],
          "changedMeshes": 30,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 18488,
            "afterTriangles": 18488,
            "reachedTarget": true,
            "changedMeshes": 0,
            "changes": [],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "o03-02-submersible-mixer",
          "coordinate_profile": "lib3d-world/1",
          "label": "수중 교반기",
          "category": "O 수처리와 환경 / O03 생물 처리와 소독",
          "summary": "무산소조·혐기조 수중 사각 가이드 마스트를 따라 승강 설치되며 스테인리스 방수 수중 모터와 3엽 바나나형 프로펠러로 슬러지 침전을 방지하고 혼합하는 가이드 레일형 수중 교반기. 바닥 및 상단 벽체 앵커 관통홀 브래킷, 상단 다윗 호이스트 지브 크레인 암, 사각 가이드 레일을 감싸는 중공 가이드 클로 브래킷 및 수직 승강 스트로크 관절(mixer_hoist_lift), 제트 유도 링 슈라우드 중공 보어 및 3엽 프로펠러 회전 관절(propeller_spin_angle), 인양 체인·수중 케이블 및 상단 프레임 DS 브랜드 입체 명판 모델.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [],
          "joints": [
            {
              "id": "mixer_hoist_lift",
              "label": "가이드 레일 수중 교반기 수직 승강 스트로크",
              "kind": "prismatic",
              "axis": [
                0,
                1,
                0
              ],
              "unit": "m",
              "min": 0,
              "max": 1.1,
              "initial": 0
            },
            {
              "id": "propeller_spin_angle",
              "label": "3엽 바나나형 프로펠러 회전",
              "kind": "revolute",
              "axis": [
                1,
                0,
                0
              ],
              "unit": "rad",
              "min": -6.283185307179586,
              "max": 6.283185307179586,
              "initial": 0
            }
          ],
          "ports": {
            "mount": "base",
            "wall_mount": "upper-wall-mount",
            "discharge": "jet-discharge-port",
            "hoist_hook": "hoist-hook-point",
            "carriage": "mixer-carriage-center",
            "propeller_tip": "propeller-blade-tip"
          },
          "required_host_features": [
            "prismatic",
            "revolute"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "수중 교반기(수조 바닥 및 상단 벽체 앵커 볼트 관통홀 체결 사각 단면 수직 가이드 레일 마스트, 상단 다윗 호이스트 지브 크레인 암 및 수직 승강 스트로크 관절, 가이드 레일 슬라이딩 가이드 클로 브래킷, 스테인리스 방수 수중 모터 하우징, 전방 3엽 바나나형 프로펠러 회전 관절 및 제트 유도 링 슈라우드 중공 관통, 상부 인양 체인·수중 동력 케이블 및 상단 프레임 DS_Brand_Plate 명판) 설계 지침에 따른 자체 설계"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S22 Veolia Water Technologies",
              "url": "https://www.veoliawatertechnologies.com/en/technologies-1",
              "basis": "제품군 분류 참고; 열람하지 않음"
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {},
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "o03-02-submersible-mixer/o03-02-submersible-mixer:base",
          "mixer-carriage-center": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/o03-02-submersible-mixer:mixer-carriage-center",
          "jet-discharge-port": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/o03-02-submersible-mixer:jet-discharge-port",
          "propeller-blade-tip": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/propeller-rotor-group/o03-02-submersible-mixer:propeller-blade-tip",
          "upper-wall-mount": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/o03-02-submersible-mixer:upper-wall-mount",
          "hoist-hook-point": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/o03-02-submersible-mixer:hoist-hook-point"
        },
        "jointBindings": [
          {
            "id": "mixer_hoist_lift",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0.72,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly"
          },
          {
            "id": "propeller_spin_angle",
            "kind": "revolute",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              0.48,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/propeller-rotor-group"
          }
        ],
        "joints": [
          {
            "id": "mixer_hoist_lift",
            "label": "가이드 레일 수중 교반기 수직 승강 스트로크",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "unit": "m",
            "min": 0,
            "max": 1.1,
            "initial": 0,
            "value": 0
          },
          {
            "id": "propeller_spin_angle",
            "label": "3엽 바나나형 프로펠러 회전",
            "kind": "revolute",
            "axis": [
              1,
              0,
              0
            ],
            "unit": "rad",
            "min": -6.283185307179586,
            "max": 6.283185307179586,
            "initial": 0,
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 32
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "수중 교반기(수조 바닥 및 상단 벽체 앵커 볼트 관통홀 체결 사각 단면 수직 가이드 레일 마스트, 상단 다윗 호이스트 지브 크레인 암 및 수직 승강 스트로크 관절, 가이드 레일 슬라이딩 가이드 클로 브래킷, 스테인리스 방수 수중 모터 하우징, 전방 3엽 바나나형 프로펠러 회전 관절 및 제트 유도 링 슈라우드 중공 관통, 상부 인양 체인·수중 동력 케이블 및 상단 프레임 DS_Brand_Plate 명판) 설계 지침에 따른 자체 설계"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S22 Veolia Water Technologies",
            "url": "https://www.veoliawatertechnologies.com/en/technologies-1",
            "basis": "제품군 분류 참고; 열람하지 않음"
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "mixer_hoist_lift": 0,
          "propeller_spin_angle": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base",
      "parent": "o03-02-submersible-mixer",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer:base",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 1
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "guide-mast-hoist-group",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 2
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/mast-floor-anchor-plate",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.36,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/mast-floor-anchor-plate",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 3
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/mast-wall-bracket-plate",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.6,
        2.28,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/mast-wall-bracket-plate",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 4
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/mast-wall-standoff-arm",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.48,
        2.28,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/mast-wall-standoff-arm",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.08,
            "depth": 0.1,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 5
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/square-guide-rail-mast",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.36,
        1.24,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/square-guide-rail-mast",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.08,
            "height": 2.4,
            "depth": 0.08,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 6
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/mast-bottom-stop-collar",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.36,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/mast-bottom-stop-collar",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.13,
            "height": 0.05,
            "depth": 0.13,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 7
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/davit-crane-column",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.36,
        2.72,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/davit-crane-column",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.048,
            "topRadius": 0.048,
            "height": 0.62,
            "radialSegments": 24,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 8
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/davit-jib-boom",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.08,
        2.98,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/davit-jib-boom",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.68,
            "height": 0.07,
            "depth": 0.07,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 9
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/davit-jib-gusset",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.22,
        2.86,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/davit-jib-gusset",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.26,
            "height": 0.18,
            "depth": 0.024,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 10
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/hoist-winch-drum",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.46,
        2.66,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/hoist-winch-drum",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.068,
            "topRadius": 0.068,
            "height": 0.11,
            "radialSegments": 24,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 11
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/hoist-winch-crank-arm",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.46,
        2.72,
        0.08,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/hoist-winch-crank-arm",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.02,
            "height": 0.16,
            "depth": 0.02,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 12
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/hoist-sheave-pulley",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.18,
        2.94,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/hoist-sheave-pulley",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 13
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/upper-hoist-wire-drop",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.18,
        2.46,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/upper-hoist-wire-drop",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.006,
            "topRadius": 0.006,
            "height": 0.96,
            "radialSegments": 8,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 14
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/mixer-brand-backing-plate",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.36,
        2.02,
        0.054,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/mixer-brand-backing-plate",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.3,
            "height": 0.12,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 15
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.36,
        2.02,
        0.066,
        1
      ],
      "sourceUserData": {
        "partId": "DS_Brand_Plate",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 16
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate/badge-bezel",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate/badge-bezel",
        "assetId": "o03-02-submersible-mixer",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 17
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate/badge-backing",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate/badge-backing",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 18
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate/badge-rivet-0",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.1085,
        -0.0335,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate/badge-rivet-0",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 19
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate/badge-rivet-1",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.1085,
        0.0335,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate/badge-rivet-1",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 20
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate/badge-rivet-2",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.1085,
        -0.0335,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate/badge-rivet-2",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 21
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate/badge-rivet-3",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.1085,
        0.0335,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate/badge-rivet-3",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 22
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate/badge-D",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.057999999999999996,
        0,
        0,
        0,
        0,
        0.057999999999999996,
        0,
        0,
        0,
        0,
        0.0036000000000000003,
        0,
        -0.025519999999999998,
        0,
        0.00346,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate/badge-D",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 23
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate/badge-S",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.057999999999999996,
        0,
        0,
        0,
        0,
        0.057999999999999996,
        0,
        0,
        0,
        0,
        0.0036000000000000003,
        0,
        0.025519999999999998,
        0,
        0.00346,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate/badge-S",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 24
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate/badge-D-back",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.057999999999999996,
        0,
        -7.102951435054648e-18,
        0,
        0,
        0.057999999999999996,
        0,
        0,
        4.408728476930472e-19,
        0,
        -0.0036000000000000003,
        0,
        0.025519999999999998,
        0,
        -0.00346,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate/badge-D-back",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 25
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate/badge-S-back",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.057999999999999996,
        0,
        -7.102951435054648e-18,
        0,
        0,
        0.057999999999999996,
        0,
        0,
        4.408728476930472e-19,
        0,
        -0.0036000000000000003,
        0,
        -0.025519999999999998,
        0,
        -0.00346,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/guide-mast-hoist-group/DS_Brand_Plate/badge-S-back",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 26
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.72,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "mixer-carriage-assembly",
        "componentRole": "actuator",
        "BOMqty": 1
      },
      "gltfNode": 27
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/guide-claw-sleeve",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.36,
        -0.12,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/guide-claw-sleeve",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 28
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/claw-support-yoke-arm",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.21,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/claw-support-yoke-arm",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.11,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 29
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/submersible-motor-housing",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.08,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/submersible-motor-housing",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.135,
            "topRadius": 0.135,
            "height": 0.56,
            "radialSegments": 24,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 30
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/motor-rear-endbell",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.22,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/motor-rear-endbell",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.125,
            "topRadius": 0.125,
            "height": 0.06,
            "radialSegments": 24,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 31
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/motor-seal-chamber",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.39,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/motor-seal-chamber",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 32
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/mixer-lifting-bail-eye",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.18,
        0.19,
        -0.012,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/mixer-lifting-bail-eye",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 33
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/lifting-chain-lower-rod",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.18,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/lifting-chain-lower-rod",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.01,
            "topRadius": 0.01,
            "height": 0.52,
            "radialSegments": 8,
            "chamfer": 0.00035000000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 34
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/submersible-power-cable-gland",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.1,
        0.16,
        0.04,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/submersible-power-cable-gland",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.022,
            "topRadius": 0.022,
            "height": 0.08,
            "radialSegments": 10,
            "chamfer": 0.0007700000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 35
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/submersible-power-cable-riser",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.1,
        0.54,
        0.04,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/submersible-power-cable-riser",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.014,
            "topRadius": 0.014,
            "height": 0.72,
            "radialSegments": 8,
            "chamfer": 0.0004900000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 36
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/jet-ring-shroud",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.5,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/jet-ring-shroud",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 37
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/shroud-support-strut-front",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.4,
        0,
        0.175,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/shroud-support-strut-front",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.02,
            "depth": 0.13,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 38
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/shroud-support-strut-rear",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.4,
        0,
        -0.175,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/shroud-support-strut-rear",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.02,
            "depth": 0.13,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 39
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/o03-02-submersible-mixer:mixer-carriage-center",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.08,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer:mixer-carriage-center"
      },
      "gltfNode": 40
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/o03-02-submersible-mixer:jet-discharge-port",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.62,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer:jet-discharge-port"
      },
      "gltfNode": 41
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/motor-endbell-bolt-0",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.252,
        0.105,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/motor-endbell-bolt-0",
        "assetId": "o03-02-submersible-mixer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 42
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/motor-endbell-bolt-1",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.252,
        0.07424621202458749,
        0.07424621202458748,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/motor-endbell-bolt-1",
        "assetId": "o03-02-submersible-mixer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 43
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/motor-endbell-bolt-2",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.252,
        6.429395695523604e-18,
        0.105,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/motor-endbell-bolt-2",
        "assetId": "o03-02-submersible-mixer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 44
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/motor-endbell-bolt-3",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.252,
        -0.07424621202458748,
        0.07424621202458749,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/motor-endbell-bolt-3",
        "assetId": "o03-02-submersible-mixer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 45
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/motor-endbell-bolt-4",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.252,
        -0.105,
        1.2858791391047208e-17,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/motor-endbell-bolt-4",
        "assetId": "o03-02-submersible-mixer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 46
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/motor-endbell-bolt-5",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.252,
        -0.0742462120245875,
        -0.07424621202458748,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/motor-endbell-bolt-5",
        "assetId": "o03-02-submersible-mixer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 47
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/motor-endbell-bolt-6",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.252,
        -1.928818708657081e-17,
        -0.105,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/motor-endbell-bolt-6",
        "assetId": "o03-02-submersible-mixer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 48
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/motor-endbell-bolt-7",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.252,
        0.07424621202458746,
        -0.0742462120245875,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/motor-endbell-bolt-7",
        "assetId": "o03-02-submersible-mixer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 49
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/propeller-rotor-group",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.48,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "propeller-rotor-group",
        "componentRole": "actuator",
        "BOMqty": 1
      },
      "gltfNode": 50
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/propeller-rotor-group/propeller-hub-body",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/propeller-rotor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/propeller-rotor-group/propeller-hub-body",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.062,
            "topRadius": 0.042,
            "height": 0.11,
            "radialSegments": 24,
            "chamfer": 0.0014700000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 51
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/propeller-rotor-group/propeller-banana-blade-1",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/propeller-rotor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9241959187121609,
        -0.17902957342582415,
        -0.3373578451359215,
        0,
        0.16817549606892546,
        0.9838436927881214,
        -0.06138884819739984,
        0,
        0.3428978074554514,
        -6.938893903907228e-18,
        0.9393727128473789,
        0,
        0.01,
        0.125,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/propeller-rotor-group/propeller-banana-blade-1",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.17,
            "depth": 0.058,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 52
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/propeller-rotor-group/propeller-banana-blade-2",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/propeller-rotor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9241959187121609,
        0.3816752507665966,
        0.013634763952505513,
        0,
        0.16817549606892546,
        -0.43875754434604564,
        0.882728055406306,
        0,
        0.34289780745545134,
        -0.8135206329477349,
        -0.46968635642368906,
        0,
        0.01,
        -0.06249999999999997,
        0.10825317547305484,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/propeller-rotor-group/propeller-banana-blade-2",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.17,
            "depth": 0.058,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 53
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/propeller-rotor-group/propeller-banana-blade-3",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/propeller-rotor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9241959187121609,
        -0.20264567734077224,
        0.323723081183416,
        0,
        0.16817549606892543,
        -0.5450861484420757,
        -0.8213392072089057,
        0,
        0.3428978074554513,
        0.8135206329477346,
        -0.4696863564236895,
        0,
        0.01,
        -0.06250000000000006,
        -0.10825317547305481,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/propeller-rotor-group/propeller-banana-blade-3",
        "assetId": "o03-02-submersible-mixer",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.17,
            "depth": 0.058,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 54
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/propeller-rotor-group/o03-02-submersible-mixer:propeller-blade-tip",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/mixer-carriage-assembly/propeller-rotor-group",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.02,
        0.21,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer:propeller-blade-tip"
      },
      "gltfNode": 55
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/o03-02-submersible-mixer:upper-wall-mount",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.6,
        2.28,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer:upper-wall-mount"
      },
      "gltfNode": 56
    },
    {
      "id": "o03-02-submersible-mixer/o03-02-submersible-mixer:base/o03-02-submersible-mixer:hoist-hook-point",
      "parent": "o03-02-submersible-mixer/o03-02-submersible-mixer:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.18,
        2.86,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "o03-02-submersible-mixer:hoist-hook-point"
      },
      "gltfNode": 57
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "수중 교반기(수조 바닥 및 상단 벽체 앵커 볼트 관통홀 체결 사각 단면 수직 가이드 레일 마스트, 상단 다윗 호이스트 지브 크레인 암 및 수직 승강 스트로크 관절, 가이드 레일 슬라이딩 가이드 클로 브래킷, 스테인리스 방수 수중 모터 하우징, 전방 3엽 바나나형 프로펠러 회전 관절 및 제트 유도 링 슈라우드 중공 관통, 상부 인양 체인·수중 동력 케이블 및 상단 프레임 DS_Brand_Plate 명판) 설계 지침에 따른 자체 설계"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S22 Veolia Water Technologies",
      "url": "https://www.veoliawatertechnologies.com/en/technologies-1",
      "basis": "제품군 분류 참고; 열람하지 않음"
    }
  ],
  "rights": {
    "id": "o03-02-submersible-mixer",
    "assetTypeId": "o03-02-submersible-mixer",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:1b8f7ba60e41913fcbedf9a4aacc2c1ca4641dfa0e72d9de8874fc6da584049b",
    "modelSource": "kit/models/o03-02-submersible-mixer.mjs",
    "dslExampleSource": "dsl/models/o03-02-submersible-mixer.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/o03-02-submersible-mixer.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/o03-02-submersible-mixer.txt",
      "sha256": "sha256:fb94f433286f0c6b77a6c43d8b0fb496198641b1c1ec2daacf0c6d8fa293f590",
      "bytes": 806
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/o03-02-submersible-mixer/model.glb",
      "bytes": 632348,
      "sha256": "sha256:35f6481018b6d477cfe06e60745943f8bccdbb2479d5418d784008471c2db880"
    },
    "licenses": [
      {
        "path": "open-assets/o03-02-submersible-mixer/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/o03-02-submersible-mixer/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/o03-02-submersible-mixer/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/o03-02-submersible-mixer/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/o03-02-submersible-mixer/LICENSES/ASSET-NOTICES/o03-02-submersible-mixer.txt",
        "bytes": 806,
        "sha256": "sha256:fb94f433286f0c6b77a6c43d8b0fb496198641b1c1ec2daacf0c6d8fa293f590"
      }
    ],
    "source": {
      "path": "kit/models/o03-02-submersible-mixer.mjs",
      "bytes": 18916,
      "sha256": "sha256:7392c1c04d5f079fc579c8700245600a49835e50031d43e4579986c8dfb57bd6"
    },
    "ds2": {
      "path": "dsl/models/o03-02-submersible-mixer.ds2",
      "bytes": 2800,
      "sha256": "sha256:ed9b3df1eb088fde887254b19104e657161e9f1e1790041ae3479f6b047d155f",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 58,
    "triangles": 18488,
    "maxMatrixError": 3.885780586188048e-16,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 12,
    "nodeComparisons": 696,
    "semanticFrameComparisons": 72,
    "acceptanceCases": 5,
    "acceptanceFrameComparisons": 30,
    "maxMotionMatrixError": 3.885780586188048e-16
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "o03-02-submersible-mixer",
    "kind": "equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "O 수처리와 환경 / O03 생물 처리와 소독",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "wall_mount": {
        "frameId": "upper-wall-mount",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -0.6,
            2.28,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "discharge": {
        "frameId": "jet-discharge-port",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.62,
            0.72,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "hoist_hook": {
        "frameId": "hoist-hook-point",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.18,
            2.86,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "carriage": {
        "frameId": "mixer-carriage-center",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.08,
            0.72,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "propeller_tip": {
        "frameId": "propeller-blade-tip",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.5,
            0.9299999999999999,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
