{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "i05-05-anodizing-hanger-jig",
  "assetTypeId": "i05-05-anodizing-hanger-jig",
  "label": "아노다이징 행거 지그",
  "category": "I 비철금속",
  "description": "실제 원형 관통홀이 있는 상부 크레인 호이스트 리프팅 아이와 양 끝단 V-콘택트 동합금 통전 블록을 구비한 수평 플라이트 바, 피치 조절 볼트 홀이 가공된 복수의 수직 도전 컬럼과 하부 흔들림 방지 스테이 바, 피치 조절 크로스바(clamp_tier_pitch)와 다단 티타늄 스프링 클램프 집게 지그(clamp_jaw_open) 및 상단 바 중앙 DS 브랜드 입체 명판을 구현한 아노다이징 행거 지그입니다.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -1.2400000095367432,
      -4.898587162186488e-18,
      -0.07999999821186066
    ],
    "max": [
      1.2400000095367432,
      1.9149999618530273,
      0.20395043727273174
    ]
  },
  "size": [
    2.4800000190734863,
    1.9149999618530273,
    0.2839504354845924
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 17,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 0,
      "blindSocketHeads": 8,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 3,
    "warnings": [],
    "changedMeshes": 25,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 23520,
      "afterTriangles": 23520,
      "reachedTarget": true,
      "changedMeshes": 0,
      "changes": [],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/i05-05-anodizing-hanger-jig.mjs",
    "sourceSha256": "sha256:9ab0c4fe36171850d097eecb8c08e202bcfb5211cee46ae37db19bfa0924c757",
    "deliverySha256": "sha256:a4b04dcbe9ca5a5eca32f02944ed39e2f15d2f2aa93decde42e5c53830cb689f",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:86111ecd4de805e6a7c4b03bd72f2bf88847263689a6defe0a1d9da666975d54",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:86111ecd4de805e6a7c4b03bd72f2bf88847263689a6defe0a1d9da666975d54",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [
    {
      "id": "flight_bar_span",
      "type": "number",
      "unit": "m",
      "min": 2.2,
      "max": 2.76,
      "default": 2.48
    },
    {
      "id": "jaw_reach",
      "type": "number",
      "unit": "m",
      "min": 0.11,
      "max": 0.18,
      "default": 0.14
    }
  ],
  "parameterValues": {
    "flight_bar_span": 2.48,
    "jaw_reach": 0.14
  },
  "joints": [
    {
      "id": "clamp_tier_pitch",
      "label": "다단 클램프 크로스바 피치 조절",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "unit": "m",
      "min": -0.28,
      "max": 0.28,
      "initial": 0
    },
    {
      "id": "clamp_jaw_open",
      "label": "티타늄 스프링 클램프 집게 개방 회전",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "unit": "rad",
      "min": -0.5236,
      "max": 0,
      "initial": -0.1745
    }
  ],
  "initialState": {
    "clamp_tier_pitch": 0,
    "clamp_jaw_open": -0.1745
  },
  "bindings": [
    {
      "id": "clamp_tier_pitch",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.92,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group",
      "gltfNode": 41
    },
    {
      "id": "clamp_jaw_open",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0.045,
        0.06
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group",
      "gltfNode": 54
    }
  ],
  "jointBindings": [
    {
      "id": "clamp_tier_pitch",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.92,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group",
      "gltfNode": 41
    },
    {
      "id": "clamp_jaw_open",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0.045,
        0.06
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group",
      "gltfNode": 54
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base",
      "nodeName": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "hoist-eye-left": {
      "id": "hoist-eye-left",
      "node": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/i05-05-anodizing-hanger-jig:hoist-eye-left",
      "nodeName": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/i05-05-anodizing-hanger-jig:hoist-eye-left",
      "gltfNode": 2,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.68,
        1.85,
        0,
        1
      ],
      "position": [
        -0.68,
        1.85,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "hoist-eye-right": {
      "id": "hoist-eye-right",
      "node": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/i05-05-anodizing-hanger-jig:hoist-eye-right",
      "nodeName": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/i05-05-anodizing-hanger-jig:hoist-eye-right",
      "gltfNode": 3,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.68,
        1.85,
        0,
        1
      ],
      "position": [
        0.68,
        1.85,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "busbar-contact-left": {
      "id": "busbar-contact-left",
      "node": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/i05-05-anodizing-hanger-jig:busbar-contact-left",
      "nodeName": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/i05-05-anodizing-hanger-jig:busbar-contact-left",
      "gltfNode": 4,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.14,
        1.6,
        0,
        1
      ],
      "position": [
        -1.14,
        1.6,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "busbar-contact-right": {
      "id": "busbar-contact-right",
      "node": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/i05-05-anodizing-hanger-jig:busbar-contact-right",
      "nodeName": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/i05-05-anodizing-hanger-jig:busbar-contact-right",
      "gltfNode": 5,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.14,
        1.6,
        0,
        1
      ],
      "position": [
        1.14,
        1.6,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "clamp-tier-center": {
      "id": "clamp-tier-center",
      "node": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/i05-05-anodizing-hanger-jig:clamp-tier-center",
      "nodeName": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/i05-05-anodizing-hanger-jig:clamp-tier-center",
      "gltfNode": 42,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.92,
        0.08,
        1
      ],
      "position": [
        0,
        0.92,
        0.08
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "clamp-jaw-tip": {
      "id": "clamp-jaw-tip",
      "node": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group/i05-05-anodizing-hanger-jig:clamp-jaw-tip",
      "nodeName": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group/i05-05-anodizing-hanger-jig:clamp-jaw-tip",
      "gltfNode": 55,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        0.9848134698792882,
        -0.17361575258114187,
        0,
        0,
        0.17361575258114187,
        0.9848134698792882,
        0,
        0,
        0.9893062053613599,
        0.19787388578310036,
        1
      ],
      "position": [
        0,
        0.9893062053613599,
        0.19787388578310036
      ],
      "quaternion": [
        -0.0871393427812942,
        0,
        0,
        0.9961961327668584
      ]
    }
  },
  "ports": {
    "mount": "base",
    "work": "clamp-jaw-tip",
    "transfer": "clamp-tier-center",
    "inlet": "hoist-eye-left",
    "outlet": "hoist-eye-right",
    "supply": "busbar-contact-left",
    "return": "busbar-contact-right"
  },
  "nodes": [
    {
      "id": "i05-05-anodizing-hanger-jig",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "i05-05-anodizing-hanger-jig",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 17,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 0,
            "blindSocketHeads": 8,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 3,
          "warnings": [],
          "changedMeshes": 25,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 23520,
            "afterTriangles": 23520,
            "reachedTarget": true,
            "changedMeshes": 0,
            "changes": [],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "i05-05-anodizing-hanger-jig",
          "coordinate_profile": "lib3d-world/1",
          "label": "아노다이징 행거 지그",
          "category": "I 비철금속 / I05 열처리와 표면처리",
          "summary": "실제 원형 관통홀이 있는 상부 크레인 호이스트 리프팅 아이와 양 끝단 V-콘택트 동합금 통전 블록을 구비한 수평 플라이트 바, 피치 조절 볼트 홀이 가공된 복수의 수직 도전 컬럼과 하부 흔들림 방지 스테이 바, 피치 조절 크로스바(clamp_tier_pitch)와 다단 티타늄 스프링 클램프 집게 지그(clamp_jaw_open) 및 상단 바 중앙 DS 브랜드 입체 명판을 구현한 아노다이징 행거 지그입니다.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [
            {
              "id": "flight_bar_span",
              "type": "number",
              "unit": "m",
              "min": 2.2,
              "max": 2.76,
              "default": 2.48
            },
            {
              "id": "jaw_reach",
              "type": "number",
              "unit": "m",
              "min": 0.11,
              "max": 0.18,
              "default": 0.14
            }
          ],
          "joints": [
            {
              "id": "clamp_tier_pitch",
              "label": "다단 클램프 크로스바 피치 조절",
              "kind": "prismatic",
              "axis": [
                0,
                1,
                0
              ],
              "unit": "m",
              "min": -0.28,
              "max": 0.28,
              "initial": 0
            },
            {
              "id": "clamp_jaw_open",
              "label": "티타늄 스프링 클램프 집게 개방 회전",
              "kind": "revolute",
              "axis": [
                1,
                0,
                0
              ],
              "unit": "rad",
              "min": -0.5236,
              "max": 0,
              "initial": -0.1745
            }
          ],
          "ports": {
            "mount": "base",
            "work": "clamp-jaw-tip",
            "transfer": "clamp-tier-center",
            "inlet": "hoist-eye-left",
            "outlet": "hoist-eye-right",
            "supply": "busbar-contact-left",
            "return": "busbar-contact-right"
          },
          "required_host_features": [
            "prismatic",
            "revolute"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "I05-05 설계 지침(실제 원형 관통홀 상부 크레인 호이스트 리프팅 아이와 양 끝단 V-콘택트 통전 블록이 구비된 수평 플라이트 바, 복수의 수직 도전 컬럼 프레임과 볼트 슬롯 홀, 피치 조절 가능한 다단 스프링 클램프 암/집게 지그 회전 관절, 하부 흔들림 방지 스테이 바 및 상단 바 중앙 DS 브랜드 입체 명판)에 따른 자체 설계"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S09 SMS group Aluminum Process Portfolio",
              "url": "https://www.sms-group.com/pt-br/insights/all-insights/tailored-to-suit-the-individual-needs-of-the-aluminum-industry",
              "basis": "제품군 분류 참고; 열람하지 않음"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S10 Metso Anode Furnace",
              "url": "https://www.metso.com/portfolio/anode-furnace/",
              "basis": "제품군 분류 참고; 열람하지 않음"
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {
          "flight_bar_span": 2.48,
          "jaw_reach": 0.14
        },
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base",
          "hoist-eye-left": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/i05-05-anodizing-hanger-jig:hoist-eye-left",
          "hoist-eye-right": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/i05-05-anodizing-hanger-jig:hoist-eye-right",
          "busbar-contact-left": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/i05-05-anodizing-hanger-jig:busbar-contact-left",
          "busbar-contact-right": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/i05-05-anodizing-hanger-jig:busbar-contact-right",
          "clamp-tier-center": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/i05-05-anodizing-hanger-jig:clamp-tier-center",
          "clamp-jaw-tip": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group/i05-05-anodizing-hanger-jig:clamp-jaw-tip"
        },
        "jointBindings": [
          {
            "id": "clamp_tier_pitch",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0.92,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group"
          },
          {
            "id": "clamp_jaw_open",
            "kind": "revolute",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              0,
              0.045,
              0.06
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group"
          }
        ],
        "joints": [
          {
            "id": "clamp_tier_pitch",
            "label": "다단 클램프 크로스바 피치 조절",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "unit": "m",
            "min": -0.28,
            "max": 0.28,
            "initial": 0,
            "value": 0
          },
          {
            "id": "clamp_jaw_open",
            "label": "티타늄 스프링 클램프 집게 개방 회전",
            "kind": "revolute",
            "axis": [
              1,
              0,
              0
            ],
            "unit": "rad",
            "min": -0.5236,
            "max": 0,
            "initial": -0.1745,
            "value": -0.1745
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 22
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "I05-05 설계 지침(실제 원형 관통홀 상부 크레인 호이스트 리프팅 아이와 양 끝단 V-콘택트 통전 블록이 구비된 수평 플라이트 바, 복수의 수직 도전 컬럼 프레임과 볼트 슬롯 홀, 피치 조절 가능한 다단 스프링 클램프 암/집게 지그 회전 관절, 하부 흔들림 방지 스테이 바 및 상단 바 중앙 DS 브랜드 입체 명판)에 따른 자체 설계"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S09 SMS group Aluminum Process Portfolio",
            "url": "https://www.sms-group.com/pt-br/insights/all-insights/tailored-to-suit-the-individual-needs-of-the-aluminum-industry",
            "basis": "제품군 분류 참고; 열람하지 않음"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S10 Metso Anode Furnace",
            "url": "https://www.metso.com/portfolio/anode-furnace/",
            "basis": "제품군 분류 참고; 열람하지 않음"
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "clamp_tier_pitch": 0,
          "clamp_jaw_open": -0.1745
        }
      },
      "gltfNode": 0
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base",
      "parent": "i05-05-anodizing-hanger-jig",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig:base"
      },
      "gltfNode": 1
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/i05-05-anodizing-hanger-jig:hoist-eye-left",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.68,
        1.85,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig:hoist-eye-left"
      },
      "gltfNode": 2
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/i05-05-anodizing-hanger-jig:hoist-eye-right",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.68,
        1.85,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig:hoist-eye-right"
      },
      "gltfNode": 3
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/i05-05-anodizing-hanger-jig:busbar-contact-left",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.14,
        1.6,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig:busbar-contact-left"
      },
      "gltfNode": 4
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/i05-05-anodizing-hanger-jig:busbar-contact-right",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.14,
        1.6,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig:busbar-contact-right"
      },
      "gltfNode": 5
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "flight-bar-structure",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 6
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/flight-bar-main-beam",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.72,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/flight-bar-main-beam",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 2.48,
            "height": 0.12,
            "depth": 0.09,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 7
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/flight-bar-copper-core",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.72,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/flight-bar-copper-core",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 2.4,
            "height": 0.05,
            "depth": 0.102,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 8
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/lifting-eye-lug-left",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.68,
        0,
        -0.022,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/lifting-eye-lug-left",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 9
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/lifting-eye-lug-right",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.68,
        0,
        -0.022,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/lifting-eye-lug-right",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 10
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/v-contact-block-left",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.14,
        0,
        -0.055,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/v-contact-block-left",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "port",
        "BOMqty": 1
      },
      "gltfNode": 11
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/v-contact-block-right",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.14,
        0,
        -0.055,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/v-contact-block-right",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "port",
        "BOMqty": 1
      },
      "gltfNode": 12
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/v-contact-bolt-left-0",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.1019999999999999,
        1.69,
        0.056,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/v-contact-bolt-left-0",
        "assetId": "i05-05-anodizing-hanger-jig",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 13
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/v-contact-bolt-left-1",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.14,
        1.728,
        0.056,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/v-contact-bolt-left-1",
        "assetId": "i05-05-anodizing-hanger-jig",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 14
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/v-contact-bolt-left-2",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.178,
        1.69,
        0.056,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/v-contact-bolt-left-2",
        "assetId": "i05-05-anodizing-hanger-jig",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 15
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/v-contact-bolt-left-3",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.14,
        1.652,
        0.056,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/v-contact-bolt-left-3",
        "assetId": "i05-05-anodizing-hanger-jig",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 16
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/v-contact-bolt-right-0",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.178,
        1.69,
        0.056,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/v-contact-bolt-right-0",
        "assetId": "i05-05-anodizing-hanger-jig",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 17
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/v-contact-bolt-right-1",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.14,
        1.728,
        0.056,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/v-contact-bolt-right-1",
        "assetId": "i05-05-anodizing-hanger-jig",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 18
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/v-contact-bolt-right-2",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.1019999999999999,
        1.69,
        0.056,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/v-contact-bolt-right-2",
        "assetId": "i05-05-anodizing-hanger-jig",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 19
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/v-contact-bolt-right-3",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.14,
        1.652,
        0.056,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/flight-bar-structure/v-contact-bolt-right-3",
        "assetId": "i05-05-anodizing-hanger-jig",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 20
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.72,
        0.054,
        1
      ],
      "sourceUserData": {
        "partId": "DS_Brand_Plate",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 21
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate/badge-bezel",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate/badge-bezel",
        "assetId": "i05-05-anodizing-hanger-jig",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 22
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate/badge-backing",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate/badge-backing",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 23
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate/badge-rivet-0",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.15432500000000002,
        -0.031825,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate/badge-rivet-0",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 24
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate/badge-rivet-1",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.15432500000000002,
        0.031825,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate/badge-rivet-1",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 25
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate/badge-rivet-2",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.15432500000000002,
        -0.031825,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate/badge-rivet-2",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 26
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate/badge-rivet-3",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.15432500000000002,
        0.031825,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate/badge-rivet-3",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 27
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate/badge-D",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.055099999999999996,
        0,
        0,
        0,
        0,
        0.055099999999999996,
        0,
        0,
        0,
        0,
        0.0027,
        0,
        -0.024243999999999998,
        0,
        0.002595,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate/badge-D",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 28
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate/badge-S",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.055099999999999996,
        0,
        0,
        0,
        0,
        0.055099999999999996,
        0,
        0,
        0,
        0,
        0.0027,
        0,
        0.024243999999999998,
        0,
        0.002595,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate/badge-S",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 29
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate/badge-D-back",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.055099999999999996,
        0,
        -6.747803863301916e-18,
        0,
        0,
        0.055099999999999996,
        0,
        0,
        3.3065463576978538e-19,
        0,
        -0.0027,
        0,
        0.024243999999999998,
        0,
        -0.002595,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate/badge-D-back",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 30
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate/badge-S-back",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.055099999999999996,
        0,
        -6.747803863301916e-18,
        0,
        0,
        0.055099999999999996,
        0,
        0,
        3.3065463576978538e-19,
        0,
        -0.0027,
        0,
        -0.024243999999999998,
        0,
        -0.002595,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/DS_Brand_Plate/badge-S-back",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 31
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "vertical-column-assembly",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 32
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly/docking-foot-left",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.68,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly/docking-foot-left",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 33
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly/docking-foot-right",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.68,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly/docking-foot-right",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 34
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly/conductive-column-1",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.68,
        0,
        -0.024,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly/conductive-column-1",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 35
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly/conductive-column-2",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.024,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly/conductive-column-2",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 36
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly/conductive-column-3",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.68,
        0,
        -0.024,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly/conductive-column-3",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 37
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly/lower-anti-sway-stay-bar",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.09,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly/lower-anti-sway-stay-bar",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.64,
            "height": 0.055,
            "depth": 0.06,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 38
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly/upper-fixed-clamp-bar",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.4,
        0.032,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly/upper-fixed-clamp-bar",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.56,
            "height": 0.045,
            "depth": 0.065,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 39
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly/lower-fixed-clamp-bar",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.42,
        0.032,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/vertical-column-assembly/lower-fixed-clamp-bar",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.56,
            "height": 0.045,
            "depth": 0.065,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 40
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.92,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "adjustable-clamp-beam-group",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 41
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/i05-05-anodizing-hanger-jig:clamp-tier-center",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.08,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig:clamp-tier-center"
      },
      "gltfNode": 42
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/adjustable-clamp-crossbar",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.035,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/adjustable-clamp-crossbar",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.6,
            "height": 0.056,
            "depth": 0.06,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 43
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/pitch-slide-bracket-1",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.68,
        0,
        -0.044,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/pitch-slide-bracket-1",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 44
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/lower-anvil-finger-1",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.68,
        -0.018,
        0.12,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/lower-anvil-finger-1",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.044,
            "height": 0.022,
            "depth": 0.16,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 45
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/clamp-hinge-pin-1",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.68,
        0.045,
        0.06,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/clamp-hinge-pin-1",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 46
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/pitch-slide-bracket-2",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.044,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/pitch-slide-bracket-2",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 47
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/lower-anvil-finger-2",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.018,
        0.12,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/lower-anvil-finger-2",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.044,
            "height": 0.022,
            "depth": 0.16,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 48
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/clamp-hinge-pin-2",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.045,
        0.06,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/clamp-hinge-pin-2",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 49
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/pitch-slide-bracket-3",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.68,
        0,
        -0.044,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/pitch-slide-bracket-3",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 50
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/lower-anvil-finger-3",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.68,
        -0.018,
        0.12,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/lower-anvil-finger-3",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.044,
            "height": 0.022,
            "depth": 0.16,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 51
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/clamp-hinge-pin-3",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.68,
        0.045,
        0.06,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/clamp-hinge-pin-3",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 52
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/clamped-aluminum-profile",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.006,
        0.165,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/clamped-aluminum-profile",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.52,
            "height": 0.024,
            "depth": 0.05,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 53
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.9848134698792882,
        -0.17361575258114187,
        0,
        0,
        0.17361575258114187,
        0.9848134698792882,
        0,
        0,
        0.045,
        0.06,
        1
      ],
      "sourceUserData": {
        "partId": "spring-clamp-jaw-group",
        "componentRole": "actuator",
        "BOMqty": 1
      },
      "gltfNode": 54
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group/i05-05-anodizing-hanger-jig:clamp-jaw-tip",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.14,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig:clamp-jaw-tip"
      },
      "gltfNode": 55
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group/jaw-sync-tie-rod",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.018,
        -0.025,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group/jaw-sync-tie-rod",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.44,
            "height": 0.02,
            "depth": 0.02,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 56
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group/upper-spring-clamp-arm-1",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.68,
        -0.012,
        0.07,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group/upper-spring-clamp-arm-1",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.038,
            "height": 0.02,
            "depth": 0.14,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 57
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group/clamp-contact-tip-1",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.68,
        -0.022,
        0.128,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group/clamp-contact-tip-1",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.038,
            "height": 0.026,
            "depth": 0.024,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 58
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group/upper-spring-clamp-arm-2",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.012,
        0.07,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group/upper-spring-clamp-arm-2",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.038,
            "height": 0.02,
            "depth": 0.14,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 59
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group/clamp-contact-tip-2",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.022,
        0.128,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group/clamp-contact-tip-2",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.038,
            "height": 0.026,
            "depth": 0.024,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 60
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group/upper-spring-clamp-arm-3",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.68,
        -0.012,
        0.07,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group/upper-spring-clamp-arm-3",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.038,
            "height": 0.02,
            "depth": 0.14,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 61
    },
    {
      "id": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group/clamp-contact-tip-3",
      "parent": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.68,
        -0.022,
        0.128,
        1
      ],
      "sourceUserData": {
        "partId": "i05-05-anodizing-hanger-jig/i05-05-anodizing-hanger-jig:base/adjustable-clamp-beam-group/spring-clamp-jaw-group/clamp-contact-tip-3",
        "assetId": "i05-05-anodizing-hanger-jig",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.038,
            "height": 0.026,
            "depth": 0.024,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 62
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "I05-05 설계 지침(실제 원형 관통홀 상부 크레인 호이스트 리프팅 아이와 양 끝단 V-콘택트 통전 블록이 구비된 수평 플라이트 바, 복수의 수직 도전 컬럼 프레임과 볼트 슬롯 홀, 피치 조절 가능한 다단 스프링 클램프 암/집게 지그 회전 관절, 하부 흔들림 방지 스테이 바 및 상단 바 중앙 DS 브랜드 입체 명판)에 따른 자체 설계"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S09 SMS group Aluminum Process Portfolio",
      "url": "https://www.sms-group.com/pt-br/insights/all-insights/tailored-to-suit-the-individual-needs-of-the-aluminum-industry",
      "basis": "제품군 분류 참고; 열람하지 않음"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S10 Metso Anode Furnace",
      "url": "https://www.metso.com/portfolio/anode-furnace/",
      "basis": "제품군 분류 참고; 열람하지 않음"
    }
  ],
  "rights": {
    "id": "i05-05-anodizing-hanger-jig",
    "assetTypeId": "i05-05-anodizing-hanger-jig",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:9ab0c4fe36171850d097eecb8c08e202bcfb5211cee46ae37db19bfa0924c757",
    "modelSource": "kit/models/i05-05-anodizing-hanger-jig.mjs",
    "dslExampleSource": "dsl/models/i05-05-anodizing-hanger-jig.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/i05-05-anodizing-hanger-jig.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/i05-05-anodizing-hanger-jig.txt",
      "sha256": "sha256:eebf7371fd728781bebf3749107dbc83691e46cea67b697583f407678c7c4898",
      "bytes": 809
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/i05-05-anodizing-hanger-jig/model.glb",
      "bytes": 577868,
      "sha256": "sha256:332f4c14e786e96721b987302e50dfa121ae7e0584f24eddb303e3237c4ec49a"
    },
    "licenses": [
      {
        "path": "open-assets/i05-05-anodizing-hanger-jig/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/i05-05-anodizing-hanger-jig/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/i05-05-anodizing-hanger-jig/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/i05-05-anodizing-hanger-jig/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/i05-05-anodizing-hanger-jig/LICENSES/ASSET-NOTICES/i05-05-anodizing-hanger-jig.txt",
        "bytes": 809,
        "sha256": "sha256:eebf7371fd728781bebf3749107dbc83691e46cea67b697583f407678c7c4898"
      }
    ],
    "source": {
      "path": "kit/models/i05-05-anodizing-hanger-jig.mjs",
      "bytes": 15506,
      "sha256": "sha256:a4b04dcbe9ca5a5eca32f02944ed39e2f15d2f2aa93decde42e5c53830cb689f"
    },
    "ds2": {
      "path": "dsl/models/i05-05-anodizing-hanger-jig.ds2",
      "bytes": 2778,
      "sha256": "sha256:b34783c27a8c592d58cbafd921b25c9d896735d50626f0cf3091c5172eed162c",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 63,
    "triangles": 23520,
    "maxMatrixError": 1.1102230246251565e-16,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 11,
    "nodeComparisons": 693,
    "semanticFrameComparisons": 77,
    "acceptanceCases": 4,
    "acceptanceFrameComparisons": 28,
    "maxMotionMatrixError": 0
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "i05-05-anodizing-hanger-jig",
    "kind": "equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "I 비철금속 / I05 열처리와 표면처리",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [
      {
        "id": "flight_bar_span",
        "type": "number",
        "unit": "m",
        "min": 2.2,
        "max": 2.76,
        "default": 2.48
      },
      {
        "id": "jaw_reach",
        "type": "number",
        "unit": "m",
        "min": 0.11,
        "max": 0.18,
        "default": 0.14
      }
    ],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "work": {
        "frameId": "clamp-jaw-tip",
        "portClass": "process",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0.9893062053613599,
            0.19787388578310036
          ],
          "quaternion": [
            -0.0871393427812942,
            0,
            0,
            0.9961961327668584
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "transfer": {
        "frameId": "clamp-tier-center",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0.92,
            0.08
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "inlet": {
        "frameId": "hoist-eye-left",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -0.68,
            1.85,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "outlet": {
        "frameId": "hoist-eye-right",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.68,
            1.85,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "supply": {
        "frameId": "busbar-contact-left",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -1.14,
            1.6,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "return": {
        "frameId": "busbar-contact-right",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            1.14,
            1.6,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
