{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "i05-04-extrusion-stretcher-straightener",
  "assetTypeId": "i05-04-extrusion-stretcher-straightener",
  "label": "압출재 인장 교정기",
  "category": "I 비철금속",
  "description": "앵커 볼트 관통홀과 다수 로킹 핀 실제 관통홀이 일정 간격으로 가공된 장축 트윈 타이빔 베드, 좌측 메인 유압 인장 실린더에 연결된 헤드스톡 인장 캐리지(stretch_stroke)와 비틀림 보정 회전 그리퍼 조(detwist_angle, 프로파일 삽입 개구부), 우측 레일 위를 주행·핀 고정하는 테일스톡 캐리지 그리퍼 헤드(tailstock_position), 유압 파워팩 및 헤드스톡 측면 DS 브랜드 입체 명판을 갖춘 압출재 인장 교정기입니다.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -2.7199999991059305,
      -9.797174324372975e-18,
      -1.259999994635582
    ],
    "max": [
      2.4000000953674316,
      1.4500000035762786,
      0.7199999964237214
    ]
  },
  "size": [
    5.120000094473362,
    1.4500000035762786,
    1.9799999910593034
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 25,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 3,
      "blindSocketHeads": 24,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 4,
    "warnings": [],
    "changedMeshes": 52,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 38984,
      "afterTriangles": 38984,
      "reachedTarget": true,
      "changedMeshes": 0,
      "changes": [],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/i05-04-extrusion-stretcher-straightener.mjs",
    "sourceSha256": "sha256:d3c67188ce51c646fc3ade6972cec9c195715760bf9dde498624b98c3c266bbc",
    "deliverySha256": "sha256:3c015f900c1b75beafa6d901bb61f98b48b68c2c1105b5fee5d638b62de95f3f",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:8869a0f5e862e9f28ecb7ad044a119a839232751aea08e83aa044155f5eda3ac",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:8869a0f5e862e9f28ecb7ad044a119a839232751aea08e83aa044155f5eda3ac",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [
    {
      "id": "jaw_outer_radius",
      "type": "number",
      "unit": "m",
      "min": 0.26,
      "max": 0.34,
      "default": 0.29
    },
    {
      "id": "cylinder_bore_radius",
      "type": "number",
      "unit": "m",
      "min": 0.16,
      "max": 0.23,
      "default": 0.19
    }
  ],
  "parameterValues": {
    "jaw_outer_radius": 0.29,
    "cylinder_bore_radius": 0.19
  },
  "joints": [
    {
      "id": "stretch_stroke",
      "label": "헤드스톡 유압 인장 스트로크",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "unit": "m",
      "min": -0.45,
      "max": 0,
      "initial": -0.12
    },
    {
      "id": "detwist_angle",
      "label": "헤드스톡 그리퍼 비틀림 교정 회전",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "unit": "rad",
      "min": -0.7854,
      "max": 0.7854,
      "initial": 0
    },
    {
      "id": "tailstock_position",
      "label": "테일스톡 캐리지 간격 주행",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "unit": "m",
      "min": -0.6,
      "max": 0.6,
      "initial": 0.2
    }
  ],
  "initialState": {
    "stretch_stroke": -0.12,
    "detwist_angle": 0,
    "tailstock_position": 0.2
  },
  "bindings": [
    {
      "id": "stretch_stroke",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        -1.12,
        0.86,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group",
      "gltfNode": 45
    },
    {
      "id": "detwist_angle",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group",
      "gltfNode": 50
    },
    {
      "id": "tailstock_position",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        1.2,
        0.86,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group",
      "gltfNode": 64
    }
  ],
  "jointBindings": [
    {
      "id": "stretch_stroke",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        -1.12,
        0.86,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group",
      "gltfNode": 45
    },
    {
      "id": "detwist_angle",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group",
      "gltfNode": 50
    },
    {
      "id": "tailstock_position",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        1.2,
        0.86,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group",
      "gltfNode": 64
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base",
      "nodeName": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "hydraulic-supply-port": {
      "id": "hydraulic-supply-port",
      "node": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/i05-04-extrusion-stretcher-straightener:hydraulic-supply-port",
      "nodeName": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/i05-04-extrusion-stretcher-straightener:hydraulic-supply-port",
      "gltfNode": 2,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.38,
        0.42,
        -1.02,
        1
      ],
      "position": [
        -2.38,
        0.42,
        -1.02
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "hydraulic-return-port": {
      "id": "hydraulic-return-port",
      "node": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/i05-04-extrusion-stretcher-straightener:hydraulic-return-port",
      "nodeName": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/i05-04-extrusion-stretcher-straightener:hydraulic-return-port",
      "gltfNode": 3,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.38,
        0.24,
        -1.02,
        1
      ],
      "position": [
        -2.38,
        0.24,
        -1.02
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "headstock-jaw-mouth": {
      "id": "headstock-jaw-mouth",
      "node": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/i05-04-extrusion-stretcher-straightener:headstock-jaw-mouth",
      "nodeName": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/i05-04-extrusion-stretcher-straightener:headstock-jaw-mouth",
      "gltfNode": 51,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.0500000000000003,
        0.86,
        0,
        1
      ],
      "position": [
        -1.0500000000000003,
        0.86,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "tailstock-jaw-mouth": {
      "id": "tailstock-jaw-mouth",
      "node": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/i05-04-extrusion-stretcher-straightener:tailstock-jaw-mouth",
      "nodeName": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/i05-04-extrusion-stretcher-straightener:tailstock-jaw-mouth",
      "gltfNode": 65,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.21,
        0.86,
        0,
        1
      ],
      "position": [
        1.21,
        0.86,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    }
  },
  "ports": {
    "mount": "base",
    "inlet": "headstock-jaw-mouth",
    "outlet": "tailstock-jaw-mouth",
    "supply": "hydraulic-supply-port",
    "return": "hydraulic-return-port"
  },
  "nodes": [
    {
      "id": "i05-04-extrusion-stretcher-straightener",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 25,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 3,
            "blindSocketHeads": 24,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 4,
          "warnings": [],
          "changedMeshes": 52,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 38984,
            "afterTriangles": 38984,
            "reachedTarget": true,
            "changedMeshes": 0,
            "changes": [],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "i05-04-extrusion-stretcher-straightener",
          "coordinate_profile": "lib3d-world/1",
          "label": "압출재 인장 교정기",
          "category": "I 비철금속 / I05 열처리와 표면처리",
          "summary": "앵커 볼트 관통홀과 다수 로킹 핀 실제 관통홀이 일정 간격으로 가공된 장축 트윈 타이빔 베드, 좌측 메인 유압 인장 실린더에 연결된 헤드스톡 인장 캐리지(stretch_stroke)와 비틀림 보정 회전 그리퍼 조(detwist_angle, 프로파일 삽입 개구부), 우측 레일 위를 주행·핀 고정하는 테일스톡 캐리지 그리퍼 헤드(tailstock_position), 유압 파워팩 및 헤드스톡 측면 DS 브랜드 입체 명판을 갖춘 압출재 인장 교정기입니다.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [
            {
              "id": "jaw_outer_radius",
              "type": "number",
              "unit": "m",
              "min": 0.26,
              "max": 0.34,
              "default": 0.29
            },
            {
              "id": "cylinder_bore_radius",
              "type": "number",
              "unit": "m",
              "min": 0.16,
              "max": 0.23,
              "default": 0.19
            }
          ],
          "joints": [
            {
              "id": "stretch_stroke",
              "label": "헤드스톡 유압 인장 스트로크",
              "kind": "prismatic",
              "axis": [
                1,
                0,
                0
              ],
              "unit": "m",
              "min": -0.45,
              "max": 0,
              "initial": -0.12
            },
            {
              "id": "detwist_angle",
              "label": "헤드스톡 그리퍼 비틀림 교정 회전",
              "kind": "revolute",
              "axis": [
                1,
                0,
                0
              ],
              "unit": "rad",
              "min": -0.7854,
              "max": 0.7854,
              "initial": 0
            },
            {
              "id": "tailstock_position",
              "label": "테일스톡 캐리지 간격 주행",
              "kind": "prismatic",
              "axis": [
                1,
                0,
                0
              ],
              "unit": "m",
              "min": -0.6,
              "max": 0.6,
              "initial": 0.2
            }
          ],
          "ports": {
            "mount": "base",
            "inlet": "headstock-jaw-mouth",
            "outlet": "tailstock-jaw-mouth",
            "supply": "hydraulic-supply-port",
            "return": "hydraulic-return-port"
          },
          "required_host_features": [
            "prismatic",
            "revolute"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "I05-04 설계 지침(앵커 볼트 관통홀과 다수 로킹 핀 실제 관통홀이 가공된 장축 트윈 타이빔 베드, 좌측 메인 유압 인장 실린더와 헤드스톡 그리퍼 조의 인장 스트로크 및 비틀림 보정 회전 관절과 프로파일 삽입 개구부, 우측 테일스톡 캐리지 그리퍼 헤드 주행 관절, 유압 파워팩 및 헤드스톡 측면 DS 브랜드 입체 명판)에 따른 자체 설계"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S09 SMS group Aluminum Process Portfolio",
              "url": "https://www.sms-group.com/pt-br/insights/all-insights/tailored-to-suit-the-individual-needs-of-the-aluminum-industry",
              "basis": "제품군 분류 참고; 열람하지 않음"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S10 Metso Anode Furnace",
              "url": "https://www.metso.com/portfolio/anode-furnace/",
              "basis": "제품군 분류 참고; 열람하지 않음"
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {
          "jaw_outer_radius": 0.29,
          "cylinder_bore_radius": 0.19
        },
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base",
          "hydraulic-supply-port": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/i05-04-extrusion-stretcher-straightener:hydraulic-supply-port",
          "hydraulic-return-port": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/i05-04-extrusion-stretcher-straightener:hydraulic-return-port",
          "headstock-jaw-mouth": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/i05-04-extrusion-stretcher-straightener:headstock-jaw-mouth",
          "tailstock-jaw-mouth": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/i05-04-extrusion-stretcher-straightener:tailstock-jaw-mouth"
        },
        "jointBindings": [
          {
            "id": "stretch_stroke",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              -1.12,
              0.86,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group"
          },
          {
            "id": "detwist_angle",
            "kind": "revolute",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group"
          },
          {
            "id": "tailstock_position",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              1.2,
              0.86,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group"
          }
        ],
        "joints": [
          {
            "id": "stretch_stroke",
            "label": "헤드스톡 유압 인장 스트로크",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "unit": "m",
            "min": -0.45,
            "max": 0,
            "initial": -0.12,
            "value": -0.12
          },
          {
            "id": "detwist_angle",
            "label": "헤드스톡 그리퍼 비틀림 교정 회전",
            "kind": "revolute",
            "axis": [
              1,
              0,
              0
            ],
            "unit": "rad",
            "min": -0.7854,
            "max": 0.7854,
            "initial": 0,
            "value": 0
          },
          {
            "id": "tailstock_position",
            "label": "테일스톡 캐리지 간격 주행",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "unit": "m",
            "min": -0.6,
            "max": 0.6,
            "initial": 0.2,
            "value": 0.2
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 31
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "I05-04 설계 지침(앵커 볼트 관통홀과 다수 로킹 핀 실제 관통홀이 가공된 장축 트윈 타이빔 베드, 좌측 메인 유압 인장 실린더와 헤드스톡 그리퍼 조의 인장 스트로크 및 비틀림 보정 회전 관절과 프로파일 삽입 개구부, 우측 테일스톡 캐리지 그리퍼 헤드 주행 관절, 유압 파워팩 및 헤드스톡 측면 DS 브랜드 입체 명판)에 따른 자체 설계"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S09 SMS group Aluminum Process Portfolio",
            "url": "https://www.sms-group.com/pt-br/insights/all-insights/tailored-to-suit-the-individual-needs-of-the-aluminum-industry",
            "basis": "제품군 분류 참고; 열람하지 않음"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S10 Metso Anode Furnace",
            "url": "https://www.metso.com/portfolio/anode-furnace/",
            "basis": "제품군 분류 참고; 열람하지 않음"
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "stretch_stroke": -0.12,
          "detwist_angle": 0,
          "tailstock_position": 0.2
        }
      },
      "gltfNode": 0
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base",
      "parent": "i05-04-extrusion-stretcher-straightener",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener:base"
      },
      "gltfNode": 1
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/i05-04-extrusion-stretcher-straightener:hydraulic-supply-port",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.38,
        0.42,
        -1.02,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener:hydraulic-supply-port"
      },
      "gltfNode": 2
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/i05-04-extrusion-stretcher-straightener:hydraulic-return-port",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.38,
        0.24,
        -1.02,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener:hydraulic-return-port"
      },
      "gltfNode": 3
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "stretcher-tiebeam-bed",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 4
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-baseplate-1",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.2,
        0,
        -0.56,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-baseplate-1",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 5
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-pedestal-1",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.2,
        0.296,
        -0.5,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-pedestal-1",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.528,
            "depth": 0.18,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 6
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-baseplate-2",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.56,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-baseplate-2",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 7
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-pedestal-2",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.296,
        -0.5,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-pedestal-2",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.528,
            "depth": 0.18,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 8
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-baseplate-3",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.2,
        0,
        -0.56,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-baseplate-3",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 9
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-pedestal-3",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.2,
        0.296,
        -0.5,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-pedestal-3",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.528,
            "depth": 0.18,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 10
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-baseplate-4",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.2,
        0,
        0.56,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-baseplate-4",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 11
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-pedestal-4",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.2,
        0.296,
        0.5,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-pedestal-4",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.528,
            "depth": 0.18,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 12
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-baseplate-5",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.56,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-baseplate-5",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 13
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-pedestal-5",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.296,
        0.5,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-pedestal-5",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.528,
            "depth": 0.18,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 14
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-baseplate-6",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.2,
        0,
        0.56,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-baseplate-6",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 15
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-pedestal-6",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.2,
        0.296,
        0.5,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-pedestal-6",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.528,
            "depth": 0.18,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 16
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-cross-bolster-1",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.2,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-cross-bolster-1",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.16,
            "depth": 1.16,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 17
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-cross-bolster-2",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-cross-bolster-2",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.16,
            "depth": 1.16,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 18
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-cross-bolster-3",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.2,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-cross-bolster-3",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.16,
            "depth": 1.16,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 19
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/tie-beam-front",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.46,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/tie-beam-front",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 20
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/tie-beam-rear",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.54,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/tie-beam-rear",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 21
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-slide-rail-front",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.938,
        0.5,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-slide-rail-front",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 4.76,
            "height": 0.036,
            "depth": 0.06,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 22
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-slide-rail-rear",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.938,
        -0.5,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/bed-slide-rail-rear",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 4.76,
            "height": 0.036,
            "depth": 0.06,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 23
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/left-reaction-yoke-block",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.12,
        0.86,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/left-reaction-yoke-block",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.32,
            "height": 0.64,
            "depth": 1.16,
            "radius": 0.005,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 24
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/right-end-tie-block",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.31,
        0.74,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/right-end-tie-block",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.42,
            "depth": 1.16,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 2,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00002,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 25
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/main-stretching-cylinder-barrel",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.24,
        0.86,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/main-stretching-cylinder-barrel",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.19,
            "topRadius": 0.19,
            "height": 0.88,
            "radialSegments": 22,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 26
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/main-cylinder-end-cap",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.68,
        0.86,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/stretcher-tiebeam-bed/main-cylinder-end-cap",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.225,
            "topRadius": 0.225,
            "height": 0.08,
            "radialSegments": 22,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 27
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.05,
        0.74,
        0.546,
        1
      ],
      "sourceUserData": {
        "partId": "DS_Brand_Plate",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 28
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate/badge-bezel",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate/badge-bezel",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 29
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate/badge-backing",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate/badge-backing",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 30
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate/badge-rivet-0",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.1669,
        -0.046900000000000004,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate/badge-rivet-0",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 31
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate/badge-rivet-1",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.1669,
        0.046900000000000004,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate/badge-rivet-1",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 32
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate/badge-rivet-2",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.1669,
        -0.046900000000000004,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate/badge-rivet-2",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 33
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate/badge-rivet-3",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.1669,
        0.046900000000000004,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate/badge-rivet-3",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 34
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate/badge-D",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.08120000000000001,
        0,
        0,
        0,
        0,
        0.08120000000000001,
        0,
        0,
        0,
        0,
        0.0027,
        0,
        -0.035728,
        0,
        0.002595,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate/badge-D",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 35
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate/badge-S",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.08120000000000001,
        0,
        0,
        0,
        0,
        0.08120000000000001,
        0,
        0,
        0,
        0,
        0.0027,
        0,
        0.035728,
        0,
        0.002595,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate/badge-S",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 36
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate/badge-D-back",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.08120000000000001,
        0,
        -9.94413200907651e-18,
        0,
        0,
        0.08120000000000001,
        0,
        0,
        3.3065463576978538e-19,
        0,
        -0.0027,
        0,
        0.035728,
        0,
        -0.002595,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate/badge-D-back",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 37
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate/badge-S-back",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.08120000000000001,
        0,
        -9.94413200907651e-18,
        0,
        0,
        0.08120000000000001,
        0,
        0,
        3.3065463576978538e-19,
        0,
        -0.0027,
        0,
        -0.035728,
        0,
        -0.002595,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/DS_Brand_Plate/badge-S-back",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 38
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/hydraulic-powerpack-skid",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "hydraulic-powerpack-skid",
        "componentRole": "motor",
        "BOMqty": 1
      },
      "gltfNode": 39
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/hydraulic-powerpack-skid/hpu-oil-reservoir",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/hydraulic-powerpack-skid",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.92,
        0.28,
        -1.02,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/hydraulic-powerpack-skid/hpu-oil-reservoir",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.84,
            "height": 0.52,
            "depth": 0.48,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 40
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/hydraulic-powerpack-skid/hpu-main-pump-motor",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/hydraulic-powerpack-skid",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.84,
        0.68,
        -1.02,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/hydraulic-powerpack-skid/hpu-main-pump-motor",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.11,
            "topRadius": 0.11,
            "height": 0.36,
            "radialSegments": 22,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 41
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/hydraulic-powerpack-skid/hpu-valve-manifold-block",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/hydraulic-powerpack-skid",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.16,
        0.63,
        -1.02,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/hydraulic-powerpack-skid/hpu-valve-manifold-block",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.18,
            "depth": 0.2,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 42
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/hydraulic-supply-flange",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.38,
        0.42,
        -1.02,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/hydraulic-supply-flange",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "port",
        "BOMqty": 1
      },
      "gltfNode": 43
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/hydraulic-return-flange",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.38,
        0.24,
        -1.02,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/hydraulic-return-flange",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "port",
        "BOMqty": 1
      },
      "gltfNode": 44
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.2400000000000002,
        0.86,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "headstock-carriage-group",
        "componentRole": "actuator",
        "BOMqty": 1
      },
      "gltfNode": 45
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/main-stretching-piston-rod",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.62,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/main-stretching-piston-rod",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "actuator",
        "BOMqty": 1
      },
      "gltfNode": 46
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-saddle-base",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.08,
        0.12,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-saddle-base",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.52,
            "height": 0.12,
            "depth": 1.12,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 47
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-housing-ring-frame",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.04,
        0.08,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-housing-ring-frame",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.34,
            "height": 0.68,
            "depth": 0.72,
            "radius": 0.005,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 48
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/detwist-worm-drive-motor",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.04,
        0.5,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/detwist-worm-drive-motor",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.18,
            "depth": 0.18,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 49
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "headstock-detwist-jaw-group",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 50
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/i05-04-extrusion-stretcher-straightener:headstock-jaw-mouth",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.19,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener:headstock-jaw-mouth"
      },
      "gltfNode": 51
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/detwist-rotor-drum",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.02,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/detwist-rotor-drum",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 52
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/headstock-jaw-faceplate",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.12,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/headstock-jaw-faceplate",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 53
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/headstock-clamp-wedge-top",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.14,
        0.09,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/headstock-clamp-wedge-top",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.036,
            "depth": 0.22,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 54
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/headstock-clamp-wedge-bottom",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.14,
        -0.09,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/headstock-clamp-wedge-bottom",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.036,
            "depth": 0.22,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 55
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/headstock-jaw-bolt-0",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.19,
        0.26,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/headstock-jaw-bolt-0",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.007,
            "height": 0.0063,
            "socketRadius": 0.00301,
            "socketDepth": 0.002646,
            "chamfer": 0.00024500000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 56
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/headstock-jaw-bolt-1",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.19,
        0.18384776310850237,
        0.18384776310850234,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/headstock-jaw-bolt-1",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.007,
            "height": 0.0063,
            "socketRadius": 0.00301,
            "socketDepth": 0.002646,
            "chamfer": 0.00024500000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 57
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/headstock-jaw-bolt-2",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.19,
        1.5920408388915593e-17,
        0.26,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/headstock-jaw-bolt-2",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.007,
            "height": 0.0063,
            "socketRadius": 0.00301,
            "socketDepth": 0.002646,
            "chamfer": 0.00024500000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 58
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/headstock-jaw-bolt-3",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.19,
        -0.18384776310850234,
        0.18384776310850237,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/headstock-jaw-bolt-3",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.007,
            "height": 0.0063,
            "socketRadius": 0.00301,
            "socketDepth": 0.002646,
            "chamfer": 0.00024500000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 59
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/headstock-jaw-bolt-4",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.19,
        -0.26,
        3.1840816777831187e-17,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/headstock-jaw-bolt-4",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.007,
            "height": 0.0063,
            "socketRadius": 0.00301,
            "socketDepth": 0.002646,
            "chamfer": 0.00024500000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 60
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/headstock-jaw-bolt-5",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.19,
        -0.1838477631085024,
        -0.18384776310850234,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/headstock-jaw-bolt-5",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.007,
            "height": 0.0063,
            "socketRadius": 0.00301,
            "socketDepth": 0.002646,
            "chamfer": 0.00024500000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 61
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/headstock-jaw-bolt-6",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.19,
        -4.7761225166746774e-17,
        -0.26,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/headstock-jaw-bolt-6",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.007,
            "height": 0.0063,
            "socketRadius": 0.00301,
            "socketDepth": 0.002646,
            "chamfer": 0.00024500000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 62
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/headstock-jaw-bolt-7",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.19,
        0.18384776310850232,
        -0.1838477631085024,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/headstock-carriage-group/headstock-detwist-jaw-group/headstock-jaw-bolt-7",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.007,
            "height": 0.0063,
            "socketRadius": 0.00301,
            "socketDepth": 0.002646,
            "chamfer": 0.00024500000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 63
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.4,
        0.86,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "tailstock-carriage-group",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 64
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/i05-04-extrusion-stretcher-straightener:tailstock-jaw-mouth",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.19,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener:tailstock-jaw-mouth"
      },
      "gltfNode": 65
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-saddle-base",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.06,
        0.1,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-saddle-base",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.56,
            "height": 0.14,
            "depth": 1.14,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 66
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-main-housing",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.04,
        0.08,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-main-housing",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.38,
            "height": 0.66,
            "depth": 0.74,
            "radius": 0.005,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 67
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-travel-gearmotor",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.26,
        0.24,
        0.44,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-travel-gearmotor",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.2,
            "height": 0.16,
            "depth": 0.18,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 68
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/locking-pin-actuator-front",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        -0.12,
        0.52,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/locking-pin-actuator-front",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "actuator",
        "BOMqty": 1
      },
      "gltfNode": 69
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/locking-pin-actuator-rear",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        -0.12,
        -0.52,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/locking-pin-actuator-rear",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "actuator",
        "BOMqty": 1
      },
      "gltfNode": 70
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-jaw-faceplate",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.19,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-jaw-faceplate",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 71
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-clamp-wedge-top",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.14,
        0.09,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-clamp-wedge-top",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.036,
            "depth": 0.22,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 72
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-clamp-wedge-bottom",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.14,
        -0.09,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-clamp-wedge-bottom",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.036,
            "depth": 0.22,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 73
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-jaw-bolt-0",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.19,
        0.26,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-jaw-bolt-0",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.007,
            "height": 0.0063,
            "socketRadius": 0.00301,
            "socketDepth": 0.002646,
            "chamfer": 0.00024500000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 74
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-jaw-bolt-1",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.19,
        0.18384776310850237,
        0.18384776310850234,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-jaw-bolt-1",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.007,
            "height": 0.0063,
            "socketRadius": 0.00301,
            "socketDepth": 0.002646,
            "chamfer": 0.00024500000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 75
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-jaw-bolt-2",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.19,
        1.5920408388915593e-17,
        0.26,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-jaw-bolt-2",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.007,
            "height": 0.0063,
            "socketRadius": 0.00301,
            "socketDepth": 0.002646,
            "chamfer": 0.00024500000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 76
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-jaw-bolt-3",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.19,
        -0.18384776310850234,
        0.18384776310850237,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-jaw-bolt-3",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.007,
            "height": 0.0063,
            "socketRadius": 0.00301,
            "socketDepth": 0.002646,
            "chamfer": 0.00024500000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 77
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-jaw-bolt-4",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.19,
        -0.26,
        3.1840816777831187e-17,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-jaw-bolt-4",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.007,
            "height": 0.0063,
            "socketRadius": 0.00301,
            "socketDepth": 0.002646,
            "chamfer": 0.00024500000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 78
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-jaw-bolt-5",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.19,
        -0.1838477631085024,
        -0.18384776310850234,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-jaw-bolt-5",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.007,
            "height": 0.0063,
            "socketRadius": 0.00301,
            "socketDepth": 0.002646,
            "chamfer": 0.00024500000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 79
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-jaw-bolt-6",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.19,
        -4.7761225166746774e-17,
        -0.26,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-jaw-bolt-6",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.007,
            "height": 0.0063,
            "socketRadius": 0.00301,
            "socketDepth": 0.002646,
            "chamfer": 0.00024500000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 80
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-jaw-bolt-7",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.19,
        0.18384776310850232,
        -0.1838477631085024,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/tailstock-carriage-group/tailstock-jaw-bolt-7",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.007,
            "height": 0.0063,
            "socketRadius": 0.00301,
            "socketDepth": 0.002646,
            "chamfer": 0.00024500000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 81
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/main-cylinder-cap-bolt-0",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.68,
        1.065,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/main-cylinder-cap-bolt-0",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 82
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/main-cylinder-cap-bolt-1",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.68,
        1.0049568901432422,
        0.14495689014324223,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/main-cylinder-cap-bolt-1",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 83
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/main-cylinder-cap-bolt-2",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.68,
        0.86,
        0.20500000000000002,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/main-cylinder-cap-bolt-2",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 84
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/main-cylinder-cap-bolt-3",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.68,
        0.7150431098567578,
        0.14495689014324226,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/main-cylinder-cap-bolt-3",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 85
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/main-cylinder-cap-bolt-4",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.68,
        0.655,
        2.5105259382520744e-17,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/main-cylinder-cap-bolt-4",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 86
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/main-cylinder-cap-bolt-5",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.68,
        0.7150431098567577,
        -0.14495689014324223,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/main-cylinder-cap-bolt-5",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 87
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/main-cylinder-cap-bolt-6",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.68,
        0.86,
        -0.20500000000000002,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/main-cylinder-cap-bolt-6",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 88
    },
    {
      "id": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/main-cylinder-cap-bolt-7",
      "parent": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.68,
        1.0049568901432422,
        -0.14495689014324228,
        1
      ],
      "sourceUserData": {
        "partId": "i05-04-extrusion-stretcher-straightener/i05-04-extrusion-stretcher-straightener:base/main-cylinder-cap-bolt-7",
        "assetId": "i05-04-extrusion-stretcher-straightener",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 89
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "I05-04 설계 지침(앵커 볼트 관통홀과 다수 로킹 핀 실제 관통홀이 가공된 장축 트윈 타이빔 베드, 좌측 메인 유압 인장 실린더와 헤드스톡 그리퍼 조의 인장 스트로크 및 비틀림 보정 회전 관절과 프로파일 삽입 개구부, 우측 테일스톡 캐리지 그리퍼 헤드 주행 관절, 유압 파워팩 및 헤드스톡 측면 DS 브랜드 입체 명판)에 따른 자체 설계"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S09 SMS group Aluminum Process Portfolio",
      "url": "https://www.sms-group.com/pt-br/insights/all-insights/tailored-to-suit-the-individual-needs-of-the-aluminum-industry",
      "basis": "제품군 분류 참고; 열람하지 않음"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S10 Metso Anode Furnace",
      "url": "https://www.metso.com/portfolio/anode-furnace/",
      "basis": "제품군 분류 참고; 열람하지 않음"
    }
  ],
  "rights": {
    "id": "i05-04-extrusion-stretcher-straightener",
    "assetTypeId": "i05-04-extrusion-stretcher-straightener",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:d3c67188ce51c646fc3ade6972cec9c195715760bf9dde498624b98c3c266bbc",
    "modelSource": "kit/models/i05-04-extrusion-stretcher-straightener.mjs",
    "dslExampleSource": "dsl/models/i05-04-extrusion-stretcher-straightener.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/i05-04-extrusion-stretcher-straightener.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/i05-04-extrusion-stretcher-straightener.txt",
      "sha256": "sha256:f246c30285d3292324a4417f83bb22ab1d295322358d68545e70d3f6538dc883",
      "bytes": 821
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/i05-04-extrusion-stretcher-straightener/model.glb",
      "bytes": 876092,
      "sha256": "sha256:5920b9bfbf2e79f689f7ba72ce8bd2884c8f5bc9e10f6413f985c26d0faae0d5"
    },
    "licenses": [
      {
        "path": "open-assets/i05-04-extrusion-stretcher-straightener/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/i05-04-extrusion-stretcher-straightener/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/i05-04-extrusion-stretcher-straightener/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/i05-04-extrusion-stretcher-straightener/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/i05-04-extrusion-stretcher-straightener/LICENSES/ASSET-NOTICES/i05-04-extrusion-stretcher-straightener.txt",
        "bytes": 821,
        "sha256": "sha256:f246c30285d3292324a4417f83bb22ab1d295322358d68545e70d3f6538dc883"
      }
    ],
    "source": {
      "path": "kit/models/i05-04-extrusion-stretcher-straightener.mjs",
      "bytes": 18492,
      "sha256": "sha256:3c015f900c1b75beafa6d901bb61f98b48b68c2c1105b5fee5d638b62de95f3f"
    },
    "ds2": {
      "path": "dsl/models/i05-04-extrusion-stretcher-straightener.ds2",
      "bytes": 3672,
      "sha256": "sha256:9429a532717cd0695a69c2b4f2d2bd67dfaa4c65ae0ee05af811028c4b67d804",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 90,
    "triangles": 38984,
    "maxMatrixError": 1.5407439555097887e-33,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 13,
    "nodeComparisons": 1170,
    "semanticFrameComparisons": 65,
    "acceptanceCases": 4,
    "acceptanceFrameComparisons": 20,
    "maxMotionMatrixError": 1.5407439555097887e-33
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "i05-04-extrusion-stretcher-straightener",
    "kind": "equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "I 비철금속 / I05 열처리와 표면처리",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [
      {
        "id": "jaw_outer_radius",
        "type": "number",
        "unit": "m",
        "min": 0.26,
        "max": 0.34,
        "default": 0.29
      },
      {
        "id": "cylinder_bore_radius",
        "type": "number",
        "unit": "m",
        "min": 0.16,
        "max": 0.23,
        "default": 0.19
      }
    ],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "inlet": {
        "frameId": "headstock-jaw-mouth",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -1.0500000000000003,
            0.86,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "outlet": {
        "frameId": "tailstock-jaw-mouth",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            1.21,
            0.86,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "supply": {
        "frameId": "hydraulic-supply-port",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -2.38,
            0.42,
            -1.02
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "return": {
        "frameId": "hydraulic-return-port",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -2.38,
            0.24,
            -1.02
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
