{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "h03-01-can-insertion-assembler",
  "assetTypeId": "h03-01-can-insertion-assembler",
  "label": "캔 삽입 조립기",
  "category": "H 배터리",
  "description": "레벨링 볼트 관통홀을 갖춘 강재 베이스 캐비닛과 안전 가드 부스, 중공 셀 캔 홀더 포켓 6개를 갖춘 로터리 인덱스 턴테이블, 젤리롤 인입 컨베이어와 바닥 절연판 삽입기, 서보 푸셔 삽입 실린더 헤드 및 캔 상단 비딩 롤러 헤드를 구현한 배터리 캔 삽입 조립기입니다.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -0.5700000007450581,
      -3.0616171314629196e-18,
      -0.49000000074505806
    ],
    "max": [
      0.5700000007450581,
      1.6749999997019769,
      0.49000000074505806
    ]
  },
  "size": [
    1.1400000014901162,
    1.6749999997019769,
    0.9800000014901161
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 27,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 5,
      "blindSocketHeads": 10,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 5,
    "warnings": [],
    "changedMeshes": 42,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 36480,
      "afterTriangles": 36480,
      "reachedTarget": true,
      "changedMeshes": 0,
      "changes": [],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/h03-01-can-insertion-assembler.mjs",
    "sourceSha256": "sha256:abab1cb061623fb2c92a3640a05d230a3c00709ea6667e2c6f5345ce3c3abe8f",
    "deliverySha256": "sha256:5e4952cc4d00ebec8e58beffd1aba9001486b1451072cf224ea8a522c93b95b2",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:dd142a06f0ddb746ee11ef2eb9b5dd50ff55b6e3ca87273574ef0ec2a63ea55b",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:dd142a06f0ddb746ee11ef2eb9b5dd50ff55b6e3ca87273574ef0ec2a63ea55b",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [
    {
      "id": "can_radius",
      "type": "number",
      "unit": "m",
      "min": 0.018,
      "max": 0.026,
      "default": 0.023
    },
    {
      "id": "can_height",
      "type": "number",
      "unit": "m",
      "min": 0.065,
      "max": 0.1,
      "default": 0.08
    }
  ],
  "parameterValues": {
    "can_radius": 0.023,
    "can_height": 0.08
  },
  "joints": [
    {
      "id": "turntable_index",
      "label": "다스테이션 로터리 인덱스 턴테이블 회전",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "unit": "rad",
      "min": -3.141592653589793,
      "max": 3.141592653589793,
      "initial": 0
    },
    {
      "id": "pusher_stroke",
      "label": "서보 푸셔 젤리롤 삽입 실린더 스트로크",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "unit": "m",
      "min": 0,
      "max": 0.18,
      "initial": 0
    },
    {
      "id": "beading_stroke",
      "label": "캔 상단 비딩 롤러 헤드 하강 스트로크",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "unit": "m",
      "min": 0,
      "max": 0.14,
      "initial": 0
    }
  ],
  "initialState": {
    "turntable_index": 0,
    "pusher_stroke": 0,
    "beading_stroke": 0
  },
  "bindings": [
    {
      "id": "turntable_index",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.74,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable",
      "gltfNode": 48
    },
    {
      "id": "pusher_stroke",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "zeroPosition": [
        -0.2,
        1.14,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/insertion-pusher-head",
      "gltfNode": 71
    },
    {
      "id": "beading_stroke",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "zeroPosition": [
        0.2,
        1.12,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/beading-roller-head",
      "gltfNode": 77
    }
  ],
  "jointBindings": [
    {
      "id": "turntable_index",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.74,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable",
      "gltfNode": 48
    },
    {
      "id": "pusher_stroke",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "zeroPosition": [
        -0.2,
        1.14,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/insertion-pusher-head",
      "gltfNode": 71
    },
    {
      "id": "beading_stroke",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "zeroPosition": [
        0.2,
        1.12,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/beading-roller-head",
      "gltfNode": 77
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base",
      "nodeName": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "jellyroll-inlet": {
      "id": "jellyroll-inlet",
      "node": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/h03-01-can-insertion-assembler:jellyroll-inlet",
      "nodeName": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/h03-01-can-insertion-assembler:jellyroll-inlet",
      "gltfNode": 2,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.5,
        0.84,
        0,
        1
      ],
      "position": [
        -0.5,
        0.84,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "can-discharge": {
      "id": "can-discharge",
      "node": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/h03-01-can-insertion-assembler:can-discharge",
      "nodeName": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/h03-01-can-insertion-assembler:can-discharge",
      "gltfNode": 3,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.52,
        0.78,
        0,
        1
      ],
      "position": [
        0.52,
        0.78,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "turntable-center": {
      "id": "turntable-center",
      "node": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/h03-01-can-insertion-assembler:turntable-center",
      "nodeName": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/h03-01-can-insertion-assembler:turntable-center",
      "gltfNode": 49,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.808,
        0,
        1
      ],
      "position": [
        0,
        0.808,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "pusher-tip": {
      "id": "pusher-tip",
      "node": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/insertion-pusher-head/h03-01-can-insertion-assembler:pusher-tip",
      "nodeName": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/insertion-pusher-head/h03-01-can-insertion-assembler:pusher-tip",
      "gltfNode": 72,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.2,
        1.0399999999999998,
        0,
        1
      ],
      "position": [
        -0.2,
        1.0399999999999998,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "beading-head-tip": {
      "id": "beading-head-tip",
      "node": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/beading-roller-head/h03-01-can-insertion-assembler:beading-head-tip",
      "nodeName": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/beading-roller-head/h03-01-can-insertion-assembler:beading-head-tip",
      "gltfNode": 78,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.2,
        1.04,
        0,
        1
      ],
      "position": [
        0.2,
        1.04,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    }
  },
  "ports": {
    "mount": "base",
    "work": "turntable-center",
    "tool": "pusher-tip",
    "beading_tool": "beading-head-tip",
    "inlet": "jellyroll-inlet",
    "outlet": "can-discharge"
  },
  "nodes": [
    {
      "id": "h03-01-can-insertion-assembler",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "h03-01-can-insertion-assembler",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 27,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 5,
            "blindSocketHeads": 10,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 5,
          "warnings": [],
          "changedMeshes": 42,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 36480,
            "afterTriangles": 36480,
            "reachedTarget": true,
            "changedMeshes": 0,
            "changes": [],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "h03-01-can-insertion-assembler",
          "coordinate_profile": "lib3d-world/1",
          "label": "캔 삽입 조립기",
          "category": "H 배터리 / H03 케이스와 주액 밀봉",
          "summary": "레벨링 볼트 관통홀을 갖춘 강재 베이스 캐비닛과 안전 가드 부스, 중공 셀 캔 홀더 포켓 6개를 갖춘 로터리 인덱스 턴테이블, 젤리롤 인입 컨베이어와 바닥 절연판 삽입기, 서보 푸셔 삽입 실린더 헤드 및 캔 상단 비딩 롤러 헤드를 구현한 배터리 캔 삽입 조립기입니다.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [
            {
              "id": "can_radius",
              "type": "number",
              "unit": "m",
              "min": 0.018,
              "max": 0.026,
              "default": 0.023
            },
            {
              "id": "can_height",
              "type": "number",
              "unit": "m",
              "min": 0.065,
              "max": 0.1,
              "default": 0.08
            }
          ],
          "joints": [
            {
              "id": "turntable_index",
              "label": "다스테이션 로터리 인덱스 턴테이블 회전",
              "kind": "revolute",
              "axis": [
                0,
                1,
                0
              ],
              "unit": "rad",
              "min": -3.141592653589793,
              "max": 3.141592653589793,
              "initial": 0
            },
            {
              "id": "pusher_stroke",
              "label": "서보 푸셔 젤리롤 삽입 실린더 스트로크",
              "kind": "prismatic",
              "axis": [
                0,
                -1,
                0
              ],
              "unit": "m",
              "min": 0,
              "max": 0.18,
              "initial": 0
            },
            {
              "id": "beading_stroke",
              "label": "캔 상단 비딩 롤러 헤드 하강 스트로크",
              "kind": "prismatic",
              "axis": [
                0,
                -1,
                0
              ],
              "unit": "m",
              "min": 0,
              "max": 0.14,
              "initial": 0
            }
          ],
          "ports": {
            "mount": "base",
            "work": "turntable-center",
            "tool": "pusher-tip",
            "beading_tool": "beading-head-tip",
            "inlet": "jellyroll-inlet",
            "outlet": "can-discharge"
          },
          "required_host_features": [
            "prismatic",
            "revolute"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "H03-01 설계 지침(강재 베이스 캐비닛 및 레벨링 볼트 관통홀, 안전 가드 부스, 다스테이션 로터리 인덱스 턴테이블 및 실제 중공 원통 셀 캔 홀더 포켓, 젤리롤 인입 컨베이어와 바닥 절연판 삽입기, 서보 푸셔 삽입 실린더 헤드, 캔 상단 비딩 롤러 헤드, 배출 슈트, 전면 DS 브랜드 입체 명판)에 따른 자체 설계"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S19 Fraunhofer ITWM Simulation of Lithium Ion Cells and Battery Packs",
              "url": "https://www.itwm.fraunhofer.de/en/departments/processes-materials/electrochemistry-batteries-fuel-cell-redox-flow/simulation-battery-production.html",
              "basis": "제품군 분류 참고; 열람하지 않음"
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {
          "can_radius": 0.023,
          "can_height": 0.08
        },
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base",
          "jellyroll-inlet": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/h03-01-can-insertion-assembler:jellyroll-inlet",
          "can-discharge": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/h03-01-can-insertion-assembler:can-discharge",
          "turntable-center": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/h03-01-can-insertion-assembler:turntable-center",
          "pusher-tip": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/insertion-pusher-head/h03-01-can-insertion-assembler:pusher-tip",
          "beading-head-tip": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/beading-roller-head/h03-01-can-insertion-assembler:beading-head-tip"
        },
        "jointBindings": [
          {
            "id": "turntable_index",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0.74,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable"
          },
          {
            "id": "pusher_stroke",
            "kind": "prismatic",
            "axis": [
              0,
              -1,
              0
            ],
            "zeroPosition": [
              -0.2,
              1.14,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/insertion-pusher-head"
          },
          {
            "id": "beading_stroke",
            "kind": "prismatic",
            "axis": [
              0,
              -1,
              0
            ],
            "zeroPosition": [
              0.2,
              1.12,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/beading-roller-head"
          }
        ],
        "joints": [
          {
            "id": "turntable_index",
            "label": "다스테이션 로터리 인덱스 턴테이블 회전",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "unit": "rad",
            "min": -3.141592653589793,
            "max": 3.141592653589793,
            "initial": 0,
            "value": 0
          },
          {
            "id": "pusher_stroke",
            "label": "서보 푸셔 젤리롤 삽입 실린더 스트로크",
            "kind": "prismatic",
            "axis": [
              0,
              -1,
              0
            ],
            "unit": "m",
            "min": 0,
            "max": 0.18,
            "initial": 0,
            "value": 0
          },
          {
            "id": "beading_stroke",
            "label": "캔 상단 비딩 롤러 헤드 하강 스트로크",
            "kind": "prismatic",
            "axis": [
              0,
              -1,
              0
            ],
            "unit": "m",
            "min": 0,
            "max": 0.14,
            "initial": 0,
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 40
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "H03-01 설계 지침(강재 베이스 캐비닛 및 레벨링 볼트 관통홀, 안전 가드 부스, 다스테이션 로터리 인덱스 턴테이블 및 실제 중공 원통 셀 캔 홀더 포켓, 젤리롤 인입 컨베이어와 바닥 절연판 삽입기, 서보 푸셔 삽입 실린더 헤드, 캔 상단 비딩 롤러 헤드, 배출 슈트, 전면 DS 브랜드 입체 명판)에 따른 자체 설계"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S19 Fraunhofer ITWM Simulation of Lithium Ion Cells and Battery Packs",
            "url": "https://www.itwm.fraunhofer.de/en/departments/processes-materials/electrochemistry-batteries-fuel-cell-redox-flow/simulation-battery-production.html",
            "basis": "제품군 분류 참고; 열람하지 않음"
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "turntable_index": 0,
          "pusher_stroke": 0,
          "beading_stroke": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base",
      "parent": "h03-01-can-insertion-assembler",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler:base"
      },
      "gltfNode": 1
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/h03-01-can-insertion-assembler:jellyroll-inlet",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.5,
        0.84,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler:jellyroll-inlet"
      },
      "gltfNode": 2
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/h03-01-can-insertion-assembler:can-discharge",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.52,
        0.78,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler:can-discharge"
      },
      "gltfNode": 3
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "steel-base-cabinet",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 4
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/leveling-foot-plate-1",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.52,
        0,
        -0.44,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/leveling-foot-plate-1",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 5
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/base-corner-pillar-1",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.47,
        0.36,
        -0.39,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/base-corner-pillar-1",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.085,
            "height": 0.68,
            "depth": 0.085,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 6
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/leveling-foot-plate-2",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.52,
        0,
        -0.44,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/leveling-foot-plate-2",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 7
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/base-corner-pillar-2",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.47,
        0.36,
        -0.39,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/base-corner-pillar-2",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.085,
            "height": 0.68,
            "depth": 0.085,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 8
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/leveling-foot-plate-3",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.52,
        0,
        0.44,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/leveling-foot-plate-3",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 9
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/base-corner-pillar-3",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.47,
        0.36,
        0.39,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/base-corner-pillar-3",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.085,
            "height": 0.68,
            "depth": 0.085,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 10
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/leveling-foot-plate-4",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.52,
        0,
        0.44,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/leveling-foot-plate-4",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 11
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/base-corner-pillar-4",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.47,
        0.36,
        0.39,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/base-corner-pillar-4",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.085,
            "height": 0.68,
            "depth": 0.085,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 12
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/cabinet-body-left",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.28,
        0.35,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/cabinet-body-left",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.42,
            "height": 0.66,
            "depth": 0.8,
            "radius": 0.005,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 13
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/cabinet-body-right",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.28,
        0.35,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/cabinet-body-right",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.42,
            "height": 0.66,
            "depth": 0.8,
            "radius": 0.005,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 14
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/cabinet-front-service-panel",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.35,
        0.41,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/cabinet-front-service-panel",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.52,
            "height": 0.64,
            "depth": 0.028,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 15
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/main-table-top-plate",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.72,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/steel-base-cabinet/main-table-top-plate",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.12,
            "height": 0.04,
            "depth": 0.96,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 16
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.56,
        0.428,
        1
      ],
      "sourceUserData": {
        "partId": "DS_Brand_Plate",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 17
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate/badge-bezel",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate/badge-bezel",
        "assetId": "h03-01-can-insertion-assembler",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 18
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate/badge-backing",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate/badge-backing",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 19
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate/badge-rivet-0",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.09845,
        -0.023450000000000002,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate/badge-rivet-0",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 20
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate/badge-rivet-1",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.09845,
        0.023450000000000002,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate/badge-rivet-1",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 21
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate/badge-rivet-2",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.09845,
        -0.023450000000000002,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate/badge-rivet-2",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 22
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate/badge-rivet-3",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.09845,
        0.023450000000000002,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate/badge-rivet-3",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 23
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate/badge-D",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.040600000000000004,
        0,
        0,
        0,
        0,
        0.040600000000000004,
        0,
        0,
        0,
        0,
        0.0018000000000000002,
        0,
        -0.017864,
        0,
        0.00173,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate/badge-D",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 24
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate/badge-S",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.040600000000000004,
        0,
        0,
        0,
        0,
        0.040600000000000004,
        0,
        0,
        0,
        0,
        0.0018000000000000002,
        0,
        0.017864,
        0,
        0.00173,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate/badge-S",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 25
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate/badge-D-back",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.040600000000000004,
        0,
        -4.972066004538255e-18,
        0,
        0,
        0.040600000000000004,
        0,
        0,
        2.204364238465236e-19,
        0,
        -0.0018000000000000002,
        0,
        0.017864,
        0,
        -0.00173,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate/badge-D-back",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 26
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate/badge-S-back",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.040600000000000004,
        0,
        -4.972066004538255e-18,
        0,
        0,
        0.040600000000000004,
        0,
        0,
        2.204364238465236e-19,
        0,
        -0.0018000000000000002,
        0,
        -0.017864,
        0,
        -0.00173,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/DS_Brand_Plate/badge-S-back",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 27
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/safety-guard-booth",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.74,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "safety-guard-booth",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 28
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/safety-guard-booth/booth-corner-stanchion-1",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/safety-guard-booth",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.51,
        0.44,
        -0.415,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/safety-guard-booth/booth-corner-stanchion-1",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.045,
            "height": 0.88,
            "depth": 0.045,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 29
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/safety-guard-booth/booth-corner-stanchion-2",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/safety-guard-booth",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.51,
        0.44,
        -0.415,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/safety-guard-booth/booth-corner-stanchion-2",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.045,
            "height": 0.88,
            "depth": 0.045,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 30
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/safety-guard-booth/booth-corner-stanchion-3",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/safety-guard-booth",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.51,
        0.44,
        0.415,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/safety-guard-booth/booth-corner-stanchion-3",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.045,
            "height": 0.88,
            "depth": 0.045,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 31
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/safety-guard-booth/booth-corner-stanchion-4",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/safety-guard-booth",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.51,
        0.44,
        0.415,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/safety-guard-booth/booth-corner-stanchion-4",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.045,
            "height": 0.88,
            "depth": 0.045,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 32
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/safety-guard-booth/booth-roof-canopy",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/safety-guard-booth",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.864,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/safety-guard-booth/booth-roof-canopy",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.08,
            "height": 0.032,
            "depth": 0.88,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 33
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/safety-guard-booth/guard-booth-front-wall",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/safety-guard-booth",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.426,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/safety-guard-booth/guard-booth-front-wall",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 34
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/safety-guard-booth/guard-booth-rear-wall",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/safety-guard-booth",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.438,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/safety-guard-booth/guard-booth-rear-wall",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 35
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.74,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "overhead-process-bridge",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 36
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge/bridge-column-left",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.34,
        0.31,
        -0.18,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge/bridge-column-left",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.62,
            "depth": 0.14,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 37
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge/bridge-column-right",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.34,
        0.31,
        -0.18,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge/bridge-column-right",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.62,
            "depth": 0.14,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 38
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge/bridge-cross-girder",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.62,
        -0.08,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge/bridge-cross-girder",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.78,
            "height": 0.09,
            "depth": 0.24,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 39
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge/pusher-servo-cylinder",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.2,
        0.74,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge/pusher-servo-cylinder",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.044,
            "topRadius": 0.044,
            "height": 0.18,
            "radialSegments": 24,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 40
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge/pusher-servo-motor",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.2,
        0.88,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge/pusher-servo-motor",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.08,
            "height": 0.11,
            "depth": 0.08,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 41
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge/beading-servo-cylinder",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.2,
        0.74,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge/beading-servo-cylinder",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.044,
            "topRadius": 0.044,
            "height": 0.18,
            "radialSegments": 24,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 42
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge/beading-servo-motor",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.2,
        0.88,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge/beading-servo-motor",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.08,
            "height": 0.11,
            "depth": 0.08,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 43
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge/pusher-flange-bolt-0",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.14400000000000002,
        0.665,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge/pusher-flange-bolt-0",
        "assetId": "h03-01-can-insertion-assembler",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.004,
            "height": 0.0036000000000000003,
            "socketRadius": 0.00172,
            "socketDepth": 0.001512,
            "chamfer": 0.00014000000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 44
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge/pusher-flange-bolt-1",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.2,
        0.665,
        0.056,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge/pusher-flange-bolt-1",
        "assetId": "h03-01-can-insertion-assembler",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.004,
            "height": 0.0036000000000000003,
            "socketRadius": 0.00172,
            "socketDepth": 0.001512,
            "chamfer": 0.00014000000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 45
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge/pusher-flange-bolt-2",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.256,
        0.665,
        6.858022075225178e-18,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge/pusher-flange-bolt-2",
        "assetId": "h03-01-can-insertion-assembler",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.004,
            "height": 0.0036000000000000003,
            "socketRadius": 0.00172,
            "socketDepth": 0.001512,
            "chamfer": 0.00014000000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 46
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge/pusher-flange-bolt-3",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.2,
        0.665,
        -0.056,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/overhead-process-bridge/pusher-flange-bolt-3",
        "assetId": "h03-01-can-insertion-assembler",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.004,
            "height": 0.0036000000000000003,
            "socketRadius": 0.00172,
            "socketDepth": 0.001512,
            "chamfer": 0.00014000000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 47
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.74,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "rotary-index-turntable",
        "componentRole": "actuator",
        "BOMqty": 1
      },
      "gltfNode": 48
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/h03-01-can-insertion-assembler:turntable-center",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.068,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler:turntable-center"
      },
      "gltfNode": 49
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/turntable-index-hub",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/turntable-index-hub",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 50
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/turntable-dial-plate",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.04,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/turntable-dial-plate",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "guide",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 51
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/can-holder-pocket-1",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.2,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/can-holder-pocket-1",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "guide",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 52
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/can-holder-pocket-2",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.10000000000000003,
        0,
        -0.17320508075688773,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/can-holder-pocket-2",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "guide",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 53
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/can-holder-pocket-3",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09999999999999996,
        0,
        -0.17320508075688776,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/can-holder-pocket-3",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "guide",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 54
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/can-holder-pocket-4",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.2,
        0,
        -2.4492935982947065e-17,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/can-holder-pocket-4",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "guide",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 55
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/can-holder-pocket-5",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.10000000000000009,
        0,
        0.1732050807568877,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/can-holder-pocket-5",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "guide",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 56
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/can-holder-pocket-6",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.10000000000000003,
        0,
        0.17320508075688773,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/can-holder-pocket-6",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "guide",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 57
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/dial-hub-bolt-0",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.095,
        0.068,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/dial-hub-bolt-0",
        "assetId": "h03-01-can-insertion-assembler",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 58
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/dial-hub-bolt-1",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.047500000000000014,
        0.068,
        0.08227241335952167,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/dial-hub-bolt-1",
        "assetId": "h03-01-can-insertion-assembler",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 59
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/dial-hub-bolt-2",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.04749999999999998,
        0.068,
        0.08227241335952168,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/dial-hub-bolt-2",
        "assetId": "h03-01-can-insertion-assembler",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 60
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/dial-hub-bolt-3",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.095,
        0.068,
        1.1634144591899856e-17,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/dial-hub-bolt-3",
        "assetId": "h03-01-can-insertion-assembler",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 61
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/dial-hub-bolt-4",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.04750000000000004,
        0.068,
        -0.08227241335952165,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/dial-hub-bolt-4",
        "assetId": "h03-01-can-insertion-assembler",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 62
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/dial-hub-bolt-5",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.047500000000000014,
        0.068,
        -0.08227241335952167,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/rotary-index-turntable/dial-hub-bolt-5",
        "assetId": "h03-01-can-insertion-assembler",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 63
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/jellyroll-infeed-unit",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.42,
        0.74,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "jellyroll-infeed-unit",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 64
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/jellyroll-infeed-unit/infeed-conveyor-frame",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/jellyroll-infeed-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.042,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/jellyroll-infeed-unit/infeed-conveyor-frame",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.084,
            "depth": 0.14,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 65
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/jellyroll-infeed-unit/infeed-guide-rail-front",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/jellyroll-infeed-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.096,
        0.045,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/jellyroll-infeed-unit/infeed-guide-rail-front",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.024,
            "depth": 0.014,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 66
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/jellyroll-infeed-unit/infeed-guide-rail-rear",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/jellyroll-infeed-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.096,
        -0.045,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/jellyroll-infeed-unit/infeed-guide-rail-rear",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.024,
            "depth": 0.014,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 67
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/jellyroll-infeed-unit/staged-jellyroll-core",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/jellyroll-infeed-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.03,
        0.121,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/jellyroll-infeed-unit/staged-jellyroll-core",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.020999999999999998,
            "topRadius": 0.020999999999999998,
            "height": 0.074,
            "radialSegments": 24,
            "chamfer": 0.000735
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 68
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/jellyroll-infeed-unit/bottom-insulator-feeder",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/jellyroll-infeed-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.08,
        0.06,
        -0.13,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/jellyroll-infeed-unit/bottom-insulator-feeder",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.12,
            "depth": 0.09,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 69
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/jellyroll-infeed-unit/insulator-magazine-tube",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/jellyroll-infeed-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.08,
        0.175,
        -0.13,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/jellyroll-infeed-unit/insulator-magazine-tube",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 70
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/insertion-pusher-head",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.2,
        1.14,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "insertion-pusher-head",
        "componentRole": "actuator",
        "BOMqty": 1
      },
      "gltfNode": 71
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/insertion-pusher-head/h03-01-can-insertion-assembler:pusher-tip",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/insertion-pusher-head",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.1,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler:pusher-tip"
      },
      "gltfNode": 72
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/insertion-pusher-head/pusher-carriage-block",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/insertion-pusher-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.03,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/insertion-pusher-head/pusher-carriage-block",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.06,
            "depth": 0.11,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 73
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/insertion-pusher-head/pusher-guide-rod-1",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/insertion-pusher-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.034,
        0.14,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/insertion-pusher-head/pusher-guide-rod-1",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 74
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/insertion-pusher-head/pusher-guide-rod-2",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/insertion-pusher-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.034,
        0.14,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/insertion-pusher-head/pusher-guide-rod-2",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 75
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/insertion-pusher-head/jellyroll-insertion-mandrel",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/insertion-pusher-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.05,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/insertion-pusher-head/jellyroll-insertion-mandrel",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.02,
            "topRadius": 0.02,
            "height": 0.1,
            "radialSegments": 24,
            "chamfer": 0.0007000000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 76
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/beading-roller-head",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.2,
        1.12,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "beading-roller-head",
        "componentRole": "actuator",
        "BOMqty": 1
      },
      "gltfNode": 77
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/beading-roller-head/h03-01-can-insertion-assembler:beading-head-tip",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/beading-roller-head",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.08,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler:beading-head-tip"
      },
      "gltfNode": 78
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/beading-roller-head/beading-spindle-housing",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/beading-roller-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.035,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/beading-roller-head/beading-spindle-housing",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.07,
            "depth": 0.12,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 79
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/beading-roller-head/beading-center-collet",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/beading-roller-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.04,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/beading-roller-head/beading-center-collet",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.018,
            "topRadius": 0.018,
            "height": 0.08,
            "radialSegments": 24,
            "chamfer": 0.00063
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 80
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/beading-roller-head/beading-forming-wheel-1",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/beading-roller-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.032,
        -0.068,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/beading-roller-head/beading-forming-wheel-1",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "actuator",
        "BOMqty": 1
      },
      "gltfNode": 81
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/beading-roller-head/beading-forming-wheel-2",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/beading-roller-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.032,
        -0.068,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/beading-roller-head/beading-forming-wheel-2",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "actuator",
        "BOMqty": 1
      },
      "gltfNode": 82
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/can-discharge-chute",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.43,
        0.74,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "can-discharge-chute",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 83
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/can-discharge-chute/discharge-chute-bed",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/can-discharge-chute",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.02,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/can-discharge-chute/discharge-chute-bed",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.2,
            "height": 0.04,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 84
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/can-discharge-chute/discharge-side-guide-front",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/can-discharge-chute",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.054,
        0.048,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/can-discharge-chute/discharge-side-guide-front",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.2,
            "height": 0.028,
            "depth": 0.012,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 85
    },
    {
      "id": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/can-discharge-chute/discharge-side-guide-rear",
      "parent": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/can-discharge-chute",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.054,
        -0.048,
        1
      ],
      "sourceUserData": {
        "partId": "h03-01-can-insertion-assembler/h03-01-can-insertion-assembler:base/can-discharge-chute/discharge-side-guide-rear",
        "assetId": "h03-01-can-insertion-assembler",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.2,
            "height": 0.028,
            "depth": 0.012,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 86
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "H03-01 설계 지침(강재 베이스 캐비닛 및 레벨링 볼트 관통홀, 안전 가드 부스, 다스테이션 로터리 인덱스 턴테이블 및 실제 중공 원통 셀 캔 홀더 포켓, 젤리롤 인입 컨베이어와 바닥 절연판 삽입기, 서보 푸셔 삽입 실린더 헤드, 캔 상단 비딩 롤러 헤드, 배출 슈트, 전면 DS 브랜드 입체 명판)에 따른 자체 설계"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S19 Fraunhofer ITWM Simulation of Lithium Ion Cells and Battery Packs",
      "url": "https://www.itwm.fraunhofer.de/en/departments/processes-materials/electrochemistry-batteries-fuel-cell-redox-flow/simulation-battery-production.html",
      "basis": "제품군 분류 참고; 열람하지 않음"
    }
  ],
  "rights": {
    "id": "h03-01-can-insertion-assembler",
    "assetTypeId": "h03-01-can-insertion-assembler",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:abab1cb061623fb2c92a3640a05d230a3c00709ea6667e2c6f5345ce3c3abe8f",
    "modelSource": "kit/models/h03-01-can-insertion-assembler.mjs",
    "dslExampleSource": "dsl/models/h03-01-can-insertion-assembler.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/h03-01-can-insertion-assembler.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/h03-01-can-insertion-assembler.txt",
      "sha256": "sha256:ecc13c08ab7bba6c072a3b45bc7a9a46c41ced903b0a0353304241395072eebc",
      "bytes": 812
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/h03-01-can-insertion-assembler/model.glb",
      "bytes": 881288,
      "sha256": "sha256:2f12b5d4c6d74b2d8b03d69c2481e2009d0b6507aa498eb2578d458ddd3e45a5"
    },
    "licenses": [
      {
        "path": "open-assets/h03-01-can-insertion-assembler/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/h03-01-can-insertion-assembler/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/h03-01-can-insertion-assembler/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/h03-01-can-insertion-assembler/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/h03-01-can-insertion-assembler/LICENSES/ASSET-NOTICES/h03-01-can-insertion-assembler.txt",
        "bytes": 812,
        "sha256": "sha256:ecc13c08ab7bba6c072a3b45bc7a9a46c41ced903b0a0353304241395072eebc"
      }
    ],
    "source": {
      "path": "kit/models/h03-01-can-insertion-assembler.mjs",
      "bytes": 19202,
      "sha256": "sha256:5e4952cc4d00ebec8e58beffd1aba9001486b1451072cf224ea8a522c93b95b2"
    },
    "ds2": {
      "path": "dsl/models/h03-01-can-insertion-assembler.ds2",
      "bytes": 3678,
      "sha256": "sha256:d575739896a20eebdbab9aa8102c8ca62dd873378cd0a7477d43405b11541193",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 87,
    "triangles": 36480,
    "maxMatrixError": 7.703719777548943e-34,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 13,
    "nodeComparisons": 1131,
    "semanticFrameComparisons": 78,
    "acceptanceCases": 4,
    "acceptanceFrameComparisons": 24,
    "maxMotionMatrixError": 7.703719777548943e-34
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "h03-01-can-insertion-assembler",
    "kind": "equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "H 배터리 / H03 케이스와 주액 밀봉",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [
      {
        "id": "can_radius",
        "type": "number",
        "unit": "m",
        "min": 0.018,
        "max": 0.026,
        "default": 0.023
      },
      {
        "id": "can_height",
        "type": "number",
        "unit": "m",
        "min": 0.065,
        "max": 0.1,
        "default": 0.08
      }
    ],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "work": {
        "frameId": "turntable-center",
        "portClass": "process",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0.808,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "tool": {
        "frameId": "pusher-tip",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -0.2,
            1.0399999999999998,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "beading_tool": {
        "frameId": "beading-head-tip",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.2,
            1.04,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "inlet": {
        "frameId": "jellyroll-inlet",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -0.5,
            0.84,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "outlet": {
        "frameId": "can-discharge",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.52,
            0.78,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
