{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "h01-05-electrode-slitter",
  "assetTypeId": "h01-05-electrode-slitter",
  "label": "전극 슬리터",
  "category": "H 배터리",
  "description": "레벨링 마운트 관통홀이 있는 정밀 베이스 프레임, 대구경 마더롤 언와인더(중공 코어 보어)와 EPC 웹 가이드, 측면 인출 정비 가이드(관절 cassette_slide)를 갖춘 상·하부 회전 원형 나이프 아버 샤프트 카세트(관절 slitter_knives), 가장자리 스크랩 트림 흡입 후드 덕트(중공 보어), 상·하 복열 프리션 샤프트 듀얼 리와인더(분할 권취 롤 코어 중공 보어)와 언로딩 푸셔 암(관절 pusher_stroke), 비전 검사 카메라 브리지 및 전면 DS 브랜드 입체 명판을 갖춘 전극 슬리터.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -1.4199999570846558,
      -4.408728735481053e-17,
      -0.8300000005960464
    ],
    "max": [
      1.4199999570846558,
      1.5999999991059304,
      0.7299999904632568
    ]
  },
  "size": [
    2.8399999141693115,
    1.5999999991059304,
    1.5599999910593032
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 24,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 2,
      "blindSocketHeads": 6,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 18,
    "warnings": [],
    "changedMeshes": 32,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 47992,
      "afterTriangles": 47992,
      "reachedTarget": true,
      "changedMeshes": 0,
      "changes": [],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/h01-05-electrode-slitter.mjs",
    "sourceSha256": "sha256:da103d5645f31559e36bea96c030ebf20008575b6dac84dffe2f06c6c6abda0b",
    "deliverySha256": "sha256:7aa3cb203ca57d8137f056c574f38142a4047d9ba579a88ad7b578a76c4d9917",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:220a28b2cd48b28df7b2f86837b0fd04112bbce8933e294dce6679a712114c3f",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:220a28b2cd48b28df7b2f86837b0fd04112bbce8933e294dce6679a712114c3f",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [],
  "parameterValues": {},
  "joints": [
    {
      "id": "cassette_slide",
      "label": "나이프 아버 카세트 측면 정비 인출 (Z축)",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "unit": "m",
      "min": 0,
      "max": 0.42,
      "initial": 0
    },
    {
      "id": "pusher_stroke",
      "label": "듀얼 리와인더 권취 롤 언로딩 푸셔 스트로크 (Z축)",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "unit": "m",
      "min": 0,
      "max": 0.38,
      "initial": 0
    },
    {
      "id": "slitter_knives",
      "label": "상·하 회전 원형 나이프 아버 및 언와인더·듀얼 리와인더 연동 회전",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "unit": "rad",
      "min": -6.283185307179586,
      "max": 6.283185307179586,
      "initial": 0
    }
  ],
  "initialState": {
    "cassette_slide": 0,
    "pusher_stroke": 0,
    "slitter_knives": 0
  },
  "bindings": [
    {
      "id": "cassette_slide",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer",
      "gltfNode": 58
    },
    {
      "id": "pusher_stroke",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0.95,
        0.93,
        -0.38
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/unloading-pusher-carrier",
      "gltfNode": 94
    },
    {
      "id": "slitter_knives",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor",
      "gltfNode": 64
    },
    {
      "id": "slitter_knives",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        1.1,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1,
      "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor",
      "gltfNode": 72
    },
    {
      "id": "slitter_knives",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -1.08,
        0.78,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 0.5,
      "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/mother-roll-rotor",
      "gltfNode": 80
    },
    {
      "id": "slitter_knives",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0.95,
        1.18,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 0.75,
      "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/upper-rewinder-rotor",
      "gltfNode": 84
    },
    {
      "id": "slitter_knives",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0.95,
        0.68,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 0.75,
      "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/lower-rewinder-rotor",
      "gltfNode": 89
    }
  ],
  "jointBindings": [
    {
      "id": "cassette_slide",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer",
      "gltfNode": 58
    },
    {
      "id": "pusher_stroke",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0.95,
        0.93,
        -0.38
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/unloading-pusher-carrier",
      "gltfNode": 94
    },
    {
      "id": "slitter_knives",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0.94,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor",
      "gltfNode": 64
    },
    {
      "id": "slitter_knives",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        1.1,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1,
      "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor",
      "gltfNode": 72
    },
    {
      "id": "slitter_knives",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -1.08,
        0.78,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 0.5,
      "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/mother-roll-rotor",
      "gltfNode": 80
    },
    {
      "id": "slitter_knives",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0.95,
        1.18,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 0.75,
      "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/upper-rewinder-rotor",
      "gltfNode": 84
    },
    {
      "id": "slitter_knives",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0.95,
        0.68,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 0.75,
      "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/lower-rewinder-rotor",
      "gltfNode": 89
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "h01-05-electrode-slitter/h01-05-electrode-slitter:base",
      "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "knife-cassette-center": {
      "id": "knife-cassette-center",
      "node": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/h01-05-electrode-slitter:knife-cassette-center",
      "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/h01-05-electrode-slitter:knife-cassette-center",
      "gltfNode": 59,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.02,
        0,
        1
      ],
      "position": [
        0,
        1.02,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "unloading-pusher-plate": {
      "id": "unloading-pusher-plate",
      "node": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/unloading-pusher-carrier/h01-05-electrode-slitter:unloading-pusher-plate",
      "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/unloading-pusher-carrier/h01-05-electrode-slitter:unloading-pusher-plate",
      "gltfNode": 95,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.95,
        0.93,
        -0.38,
        1
      ],
      "position": [
        0.95,
        0.93,
        -0.38
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "mother-roll-entry": {
      "id": "mother-roll-entry",
      "node": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/h01-05-electrode-slitter:mother-roll-entry",
      "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/h01-05-electrode-slitter:mother-roll-entry",
      "gltfNode": 99,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.42,
        0.78,
        0,
        1
      ],
      "position": [
        -1.42,
        0.78,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "upper-rewinder-exit": {
      "id": "upper-rewinder-exit",
      "node": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/h01-05-electrode-slitter:upper-rewinder-exit",
      "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/h01-05-electrode-slitter:upper-rewinder-exit",
      "gltfNode": 100,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.32,
        1.18,
        0,
        1
      ],
      "position": [
        1.32,
        1.18,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "lower-rewinder-exit": {
      "id": "lower-rewinder-exit",
      "node": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/h01-05-electrode-slitter:lower-rewinder-exit",
      "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/h01-05-electrode-slitter:lower-rewinder-exit",
      "gltfNode": 101,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.32,
        0.68,
        0,
        1
      ],
      "position": [
        1.32,
        0.68,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "trim-scrap-suction": {
      "id": "trim-scrap-suction",
      "node": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/h01-05-electrode-slitter:trim-scrap-suction",
      "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/h01-05-electrode-slitter:trim-scrap-suction",
      "gltfNode": 102,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.18,
        0.52,
        -0.68,
        1
      ],
      "position": [
        0.18,
        0.52,
        -0.68
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    }
  },
  "ports": {
    "mount": "base",
    "inlet": "mother-roll-entry",
    "outlet": "upper-rewinder-exit",
    "work": "lower-rewinder-exit",
    "exhaust": "trim-scrap-suction"
  },
  "nodes": [
    {
      "id": "h01-05-electrode-slitter",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "h01-05-electrode-slitter",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 24,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 2,
            "blindSocketHeads": 6,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 18,
          "warnings": [],
          "changedMeshes": 32,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 47992,
            "afterTriangles": 47992,
            "reachedTarget": true,
            "changedMeshes": 0,
            "changes": [],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "h01-05-electrode-slitter",
          "coordinate_profile": "lib3d-world/1",
          "label": "전극 슬리터",
          "category": "H 배터리 / H01 전극 제조",
          "summary": "레벨링 마운트 관통홀이 있는 정밀 베이스 프레임, 대구경 마더롤 언와인더(중공 코어 보어)와 EPC 웹 가이드, 측면 인출 정비 가이드(관절 cassette_slide)를 갖춘 상·하부 회전 원형 나이프 아버 샤프트 카세트(관절 slitter_knives), 가장자리 스크랩 트림 흡입 후드 덕트(중공 보어), 상·하 복열 프리션 샤프트 듀얼 리와인더(분할 권취 롤 코어 중공 보어)와 언로딩 푸셔 암(관절 pusher_stroke), 비전 검사 카메라 브리지 및 전면 DS 브랜드 입체 명판을 갖춘 전극 슬리터.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [],
          "joints": [
            {
              "id": "cassette_slide",
              "label": "나이프 아버 카세트 측면 정비 인출 (Z축)",
              "kind": "prismatic",
              "axis": [
                0,
                0,
                1
              ],
              "unit": "m",
              "min": 0,
              "max": 0.42,
              "initial": 0
            },
            {
              "id": "pusher_stroke",
              "label": "듀얼 리와인더 권취 롤 언로딩 푸셔 스트로크 (Z축)",
              "kind": "prismatic",
              "axis": [
                0,
                0,
                1
              ],
              "unit": "m",
              "min": 0,
              "max": 0.38,
              "initial": 0
            },
            {
              "id": "slitter_knives",
              "label": "상·하 회전 원형 나이프 아버 및 언와인더·듀얼 리와인더 연동 회전",
              "kind": "revolute",
              "axis": [
                0,
                0,
                1
              ],
              "unit": "rad",
              "min": -6.283185307179586,
              "max": 6.283185307179586,
              "initial": 0
            }
          ],
          "ports": {
            "mount": "base",
            "inlet": "mother-roll-entry",
            "outlet": "upper-rewinder-exit",
            "work": "lower-rewinder-exit",
            "exhaust": "trim-scrap-suction"
          },
          "required_host_features": [
            "prismatic",
            "revolute"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "H01-05 전극 슬리터 설계 지침(레벨링 마운트 관통홀 정밀 베이스 프레임, 대구경 마더롤 언와인더 중공 코어 보어와 EPC 웹 가이드, 상·하 회전 원형 나이프 아버 카세트 및 측면 인출 가이드, 스크랩 트림 흡입 후드 덕트 중공 보어, 상·하 복열 프리션 샤프트 듀얼 리와인더 중공 코어 보어와 언로딩 푸셔 암, 비전 검사 카메라 브리지 및 전면 DS_Brand_Plate 명판)에 따른 자체 설계"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S19 Fraunhofer ITWM Simulation of Lithium Ion Cells and Battery Packs",
              "url": "https://www.itwm.fraunhofer.de/en/departments/processes-materials/electrochemistry-batteries-fuel-cell-redox-flow/simulation-battery-production.html",
              "basis": "제품군 분류 참고; 열람하지 않음"
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {},
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "h01-05-electrode-slitter/h01-05-electrode-slitter:base",
          "knife-cassette-center": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/h01-05-electrode-slitter:knife-cassette-center",
          "unloading-pusher-plate": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/unloading-pusher-carrier/h01-05-electrode-slitter:unloading-pusher-plate",
          "mother-roll-entry": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/h01-05-electrode-slitter:mother-roll-entry",
          "upper-rewinder-exit": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/h01-05-electrode-slitter:upper-rewinder-exit",
          "lower-rewinder-exit": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/h01-05-electrode-slitter:lower-rewinder-exit",
          "trim-scrap-suction": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/h01-05-electrode-slitter:trim-scrap-suction"
        },
        "jointBindings": [
          {
            "id": "cassette_slide",
            "kind": "prismatic",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer"
          },
          {
            "id": "pusher_stroke",
            "kind": "prismatic",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0.95,
              0.93,
              -0.38
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/unloading-pusher-carrier"
          },
          {
            "id": "slitter_knives",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0,
              0.94,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor"
          },
          {
            "id": "slitter_knives",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0,
              1.1,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": -1,
            "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor"
          },
          {
            "id": "slitter_knives",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              -1.08,
              0.78,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 0.5,
            "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/mother-roll-rotor"
          },
          {
            "id": "slitter_knives",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0.95,
              1.18,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 0.75,
            "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/upper-rewinder-rotor"
          },
          {
            "id": "slitter_knives",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0.95,
              0.68,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 0.75,
            "nodeName": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/lower-rewinder-rotor"
          }
        ],
        "joints": [
          {
            "id": "cassette_slide",
            "label": "나이프 아버 카세트 측면 정비 인출 (Z축)",
            "kind": "prismatic",
            "axis": [
              0,
              0,
              1
            ],
            "unit": "m",
            "min": 0,
            "max": 0.42,
            "initial": 0,
            "value": 0
          },
          {
            "id": "pusher_stroke",
            "label": "듀얼 리와인더 권취 롤 언로딩 푸셔 스트로크 (Z축)",
            "kind": "prismatic",
            "axis": [
              0,
              0,
              1
            ],
            "unit": "m",
            "min": 0,
            "max": 0.38,
            "initial": 0,
            "value": 0
          },
          {
            "id": "slitter_knives",
            "label": "상·하 회전 원형 나이프 아버 및 언와인더·듀얼 리와인더 연동 회전",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "unit": "rad",
            "min": -6.283185307179586,
            "max": 6.283185307179586,
            "initial": 0,
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 38
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "H01-05 전극 슬리터 설계 지침(레벨링 마운트 관통홀 정밀 베이스 프레임, 대구경 마더롤 언와인더 중공 코어 보어와 EPC 웹 가이드, 상·하 회전 원형 나이프 아버 카세트 및 측면 인출 가이드, 스크랩 트림 흡입 후드 덕트 중공 보어, 상·하 복열 프리션 샤프트 듀얼 리와인더 중공 코어 보어와 언로딩 푸셔 암, 비전 검사 카메라 브리지 및 전면 DS_Brand_Plate 명판)에 따른 자체 설계"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S19 Fraunhofer ITWM Simulation of Lithium Ion Cells and Battery Packs",
            "url": "https://www.itwm.fraunhofer.de/en/departments/processes-materials/electrochemistry-batteries-fuel-cell-redox-flow/simulation-battery-production.html",
            "basis": "제품군 분류 참고; 열람하지 않음"
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "cassette_slide": 0,
          "pusher_stroke": 0,
          "slitter_knives": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base",
      "parent": "h01-05-electrode-slitter",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter:base",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 1
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "slitter-frame-group",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 2
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/slitter-base-plate",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/slitter-base-plate",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 3
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/slitter-side-wall-front",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.51,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/slitter-side-wall-front",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 4
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/slitter-side-wall-rear",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.515,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/slitter-side-wall-rear",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 5
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/cassette-guide-rail-left",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.21,
        0.695,
        0.22,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/cassette-guide-rail-left",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.045,
            "height": 0.045,
            "depth": 1.02,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 6
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/cassette-guide-rail-right",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.21,
        0.695,
        0.22,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/cassette-guide-rail-right",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.045,
            "height": 0.045,
            "depth": 1.02,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 7
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/cassette-outboard-support-leg-L",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.21,
        0.36,
        0.68,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/cassette-outboard-support-leg-L",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.06,
            "height": 0.63,
            "depth": 0.06,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 8
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/cassette-outboard-support-leg-R",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.21,
        0.36,
        0.68,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/cassette-outboard-support-leg-R",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.06,
            "height": 0.63,
            "depth": 0.06,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 9
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.54,
        0.62,
        0.548,
        1
      ],
      "sourceUserData": {
        "partId": "DS_Brand_Plate",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 10
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate/badge-bezel",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate/badge-bezel",
        "assetId": "h01-05-electrode-slitter",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 11
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate/badge-backing",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate/badge-backing",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 12
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate/badge-rivet-0",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.141025,
        -0.038525000000000004,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate/badge-rivet-0",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 13
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate/badge-rivet-1",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.141025,
        0.038525000000000004,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate/badge-rivet-1",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 14
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate/badge-rivet-2",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.141025,
        -0.038525000000000004,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate/badge-rivet-2",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 15
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate/badge-rivet-3",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.141025,
        0.038525000000000004,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate/badge-rivet-3",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 16
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate/badge-D",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.0667,
        0,
        0,
        0,
        0,
        0.0667,
        0,
        0,
        0,
        0,
        0.0036000000000000003,
        0,
        -0.029348,
        0,
        0.00346,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate/badge-D",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 17
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate/badge-S",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.0667,
        0,
        0,
        0,
        0,
        0.0667,
        0,
        0,
        0,
        0,
        0.0036000000000000003,
        0,
        0.029348,
        0,
        0.00346,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate/badge-S",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 18
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate/badge-D-back",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.0667,
        0,
        -8.168394150312845e-18,
        0,
        0,
        0.0667,
        0,
        0,
        4.408728476930472e-19,
        0,
        -0.0036000000000000003,
        0,
        0.029348,
        0,
        -0.00346,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate/badge-D-back",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 19
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate/badge-S-back",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.0667,
        0,
        -8.168394150312845e-18,
        0,
        0,
        0.0667,
        0,
        0,
        4.408728476930472e-19,
        0,
        -0.0036000000000000003,
        0,
        -0.029348,
        0,
        -0.00346,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/DS_Brand_Plate/badge-S-back",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 20
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/epc-web-guide-actuator",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.6,
        0.86,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/epc-web-guide-actuator",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.14,
            "depth": 0.88,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 21
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/epc-guide-roller-1",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.66,
        0.98,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/epc-guide-roller-1",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 22
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/epc-guide-roller-2",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.52,
        1.02,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/epc-guide-roller-2",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 23
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/slit-deflector-roller-upper",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.44,
        1.12,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/slit-deflector-roller-upper",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 24
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/slit-deflector-roller-lower",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.44,
        0.84,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/slit-deflector-roller-lower",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 25
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/knife-drive-servo-motor",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.94,
        -0.69,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/knife-drive-servo-motor",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.095,
            "topRadius": 0.095,
            "height": 0.28,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 26
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/rewinder-drive-servo-motor",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.68,
        0.93,
        -0.69,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/rewinder-drive-servo-motor",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.095,
            "topRadius": 0.095,
            "height": 0.28,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 27
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/rear-bearing-flange-bolts-0",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.12,
        0.94,
        -0.555,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/rear-bearing-flange-bolts-0",
        "assetId": "h01-05-electrode-slitter",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.007,
            "height": 0.0063,
            "socketRadius": 0.00301,
            "socketDepth": 0.002646,
            "chamfer": 0.00024500000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 28
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/rear-bearing-flange-bolts-1",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.06000000000000001,
        1.0439230484541326,
        -0.555,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/rear-bearing-flange-bolts-1",
        "assetId": "h01-05-electrode-slitter",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.007,
            "height": 0.0063,
            "socketRadius": 0.00301,
            "socketDepth": 0.002646,
            "chamfer": 0.00024500000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 29
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/rear-bearing-flange-bolts-2",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.05999999999999997,
        1.0439230484541326,
        -0.555,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/rear-bearing-flange-bolts-2",
        "assetId": "h01-05-electrode-slitter",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.007,
            "height": 0.0063,
            "socketRadius": 0.00301,
            "socketDepth": 0.002646,
            "chamfer": 0.00024500000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 30
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/rear-bearing-flange-bolts-3",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.12,
        0.94,
        -0.555,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/rear-bearing-flange-bolts-3",
        "assetId": "h01-05-electrode-slitter",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.007,
            "height": 0.0063,
            "socketRadius": 0.00301,
            "socketDepth": 0.002646,
            "chamfer": 0.00024500000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 31
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/rear-bearing-flange-bolts-4",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.06000000000000005,
        0.8360769515458674,
        -0.555,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/rear-bearing-flange-bolts-4",
        "assetId": "h01-05-electrode-slitter",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.007,
            "height": 0.0063,
            "socketRadius": 0.00301,
            "socketDepth": 0.002646,
            "chamfer": 0.00024500000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 32
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/rear-bearing-flange-bolts-5",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.06000000000000001,
        0.8360769515458674,
        -0.555,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/rear-bearing-flange-bolts-5",
        "assetId": "h01-05-electrode-slitter",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.007,
            "height": 0.0063,
            "socketRadius": 0.00301,
            "socketDepth": 0.002646,
            "chamfer": 0.00024500000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 33
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/vision-camera-cable",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/vision-camera-cable",
        "assetId": "h01-05-electrode-slitter"
      },
      "gltfNode": 34
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/vision-camera-cable-rib-2",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9911842991668417,
        0.11040239146818828,
        -0.07324614012520929,
        0,
        0.11040239146818828,
        -0.3826113513346583,
        0.9172894122292985,
        0,
        0.07324614012520929,
        -0.9172894122292985,
        -0.3914270521678167,
        0,
        0.44181900608611396,
        1.5188055728193492,
        -0.4766261300439771,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/vision-camera-cable-rib-2",
        "assetId": "h01-05-electrode-slitter"
      },
      "gltfNode": 35
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/vision-camera-cable-rib-4",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9849706422014959,
        0.14441862636032596,
        -0.09474225224982438,
        0,
        0.14441862636032596,
        -0.38773325643224155,
        0.9103879295205125,
        0,
        0.09474225224982438,
        -0.9103879295205125,
        -0.40276261423074566,
        0,
        0.4457442297456231,
        1.4782418546697975,
        -0.4943799987658773,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/vision-camera-cable-rib-4",
        "assetId": "h01-05-electrode-slitter"
      },
      "gltfNode": 36
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/vision-camera-cable-rib-6",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.993187867190023,
        0.09695772439914215,
        -0.06463017983785217,
        0,
        0.09695772439914215,
        -0.3800083737198634,
        0.9198874037522874,
        0,
        0.06463017983785217,
        -0.9198874037522874,
        -0.38682050652984024,
        0,
        0.4494779790802782,
        1.437620799335601,
        -0.5120313457897845,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/vision-camera-cable-rib-6",
        "assetId": "h01-05-electrode-slitter"
      },
      "gltfNode": 37
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/vision-camera-cable-rib-8",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.999553438933316,
        -0.024469960288788808,
        0.017150619815234015,
        0,
        -0.024469960288788808,
        -0.34086690759071003,
        0.9397930476190022,
        0,
        -0.017150619815234015,
        -0.9397930476190022,
        -0.341313468657394,
        0,
        0.4507225621918299,
        1.3962543606010136,
        -0.5283499107397825,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/vision-camera-cable-rib-8",
        "assetId": "h01-05-electrode-slitter"
      },
      "gltfNode": 38
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/vision-camera-cable-rib-10",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9710392703946786,
        -0.18904645975330805,
        0.14609644556289222,
        0,
        -0.18904645975330805,
        -0.2340353448378707,
        0.9536712711523609,
        0,
        -0.14609644556289222,
        -0.9536712711523609,
        -0.26299607444319206,
        0,
        0.4471802871820289,
        1.3534544922502907,
        -0.5421054332399553,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/vision-camera-cable-rib-10",
        "assetId": "h01-05-electrode-slitter"
      },
      "gltfNode": 39
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/vision-camera-cable-rib-12",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.8851469688764805,
        -0.3446902935183964,
        0.3125755029476566,
        0,
        -0.3446902935183964,
        -0.03446463087266505,
        0.938083573448023,
        0,
        -0.3125755029476566,
        -0.938083573448023,
        -0.14931766199618446,
        0,
        0.43539586866156826,
        1.3049638632200222,
        -0.5526563298573712,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/vision-camera-cable-rib-12",
        "assetId": "h01-05-electrode-slitter"
      },
      "gltfNode": 40
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/vision-camera-cable-rib-14",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.7891767092881503,
        -0.4190757534857374,
        0.44897175229349073,
        0,
        -0.4190757534857374,
        0.16695879963433613,
        0.8924686392613597,
        0,
        -0.44897175229349073,
        -0.8924686392613597,
        -0.043864491077513446,
        0,
        0.40877920107168825,
        1.242363775024975,
        -0.5588910214234324,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/vision-camera-cable-rib-14",
        "assetId": "h01-05-electrode-slitter"
      },
      "gltfNode": 41
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/vision-camera-cable-rib-16",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.7347537630821117,
        -0.4367119573671501,
        0.5190564265368734,
        0,
        -0.4367119573671501,
        0.28098005866719433,
        0.8545951514746224,
        0,
        -0.5190564265368734,
        -0.8545951514746224,
        0.015733821749305932,
        0,
        0.37199435710897844,
        1.1767188158967605,
        -0.5596813344388487,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/vision-camera-cable-rib-16",
        "assetId": "h01-05-electrode-slitter"
      },
      "gltfNode": 42
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/vision-camera-cable-rib-18",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.7104773767162689,
        -0.43958020560144456,
        0.5495372053080307,
        0,
        -0.43958020560144456,
        0.332588400294913,
        0.8343585553181931,
        0,
        -0.5495372053080307,
        -0.8343585553181931,
        0.04306577701118175,
        0,
        0.32897740504679224,
        1.1092076455514428,
        -0.5571347702780631,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/vision-camera-cable-rib-18",
        "assetId": "h01-05-electrode-slitter"
      },
      "gltfNode": 43
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/vision-camera-cable-rib-20",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.7087209854413996,
        -0.43966769285748664,
        0.5517308081413852,
        0,
        -0.43966769285748664,
        0.33634875675626463,
        0.8328035985068085,
        0,
        -0.5517308081413852,
        -0.8328035985068085,
        0.04506974219766424,
        0,
        0.28366441315848323,
        1.0410089237050875,
        -0.5533588303155189,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/slitter-frame-group/vision-camera-cable-rib-20",
        "assetId": "h01-05-electrode-slitter"
      },
      "gltfNode": 44
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/vision-inspection-bridge-group",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.44,
        1.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "vision-inspection-bridge-group",
        "componentRole": "sensor",
        "BOMqty": 1
      },
      "gltfNode": 45
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/vision-inspection-bridge-group/vision-gantry-beam",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/vision-inspection-bridge-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.08,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/vision-inspection-bridge-group/vision-gantry-beam",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.14,
            "height": 0.08,
            "depth": 0.96,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 46
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/vision-inspection-bridge-group/vision-led-backlight-bar",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/vision-inspection-bridge-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.18,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/vision-inspection-bridge-group/vision-led-backlight-bar",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "sensor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.035,
            "depth": 0.82,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 47
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/vision-inspection-bridge-group/linescan-camera-body-1",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/vision-inspection-bridge-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.2,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/vision-inspection-bridge-group/linescan-camera-body-1",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "sensor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.08,
            "height": 0.09,
            "depth": 0.08,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 48
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/vision-inspection-bridge-group/linescan-camera-lens-1",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/vision-inspection-bridge-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.065,
        -0.2,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/vision-inspection-bridge-group/linescan-camera-lens-1",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "sensor",
        "BOMqty": 1
      },
      "gltfNode": 49
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/vision-inspection-bridge-group/linescan-camera-body-2",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/vision-inspection-bridge-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.2,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/vision-inspection-bridge-group/linescan-camera-body-2",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "sensor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.08,
            "height": 0.09,
            "depth": 0.08,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 50
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/vision-inspection-bridge-group/linescan-camera-lens-2",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/vision-inspection-bridge-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.065,
        0.2,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/vision-inspection-bridge-group/linescan-camera-lens-2",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "sensor",
        "BOMqty": 1
      },
      "gltfNode": 51
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/edge-trim-suction-group",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "edge-trim-suction-group",
        "componentRole": "port",
        "BOMqty": 1
      },
      "gltfNode": 52
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/edge-trim-suction-group/trim-suction-nozzle-front",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/edge-trim-suction-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.18,
        0.86,
        0.39,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/edge-trim-suction-group/trim-suction-nozzle-front",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "port",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.18,
            "depth": 0.09,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 53
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/edge-trim-suction-group/trim-suction-nozzle-rear",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/edge-trim-suction-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.18,
        0.86,
        -0.39,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/edge-trim-suction-group/trim-suction-nozzle-rear",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "port",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.18,
            "depth": 0.09,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 54
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/edge-trim-suction-group/trim-collector-manifold",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/edge-trim-suction-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.18,
        0.52,
        -0.08,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/edge-trim-suction-group/trim-collector-manifold",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "port",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.14,
            "height": 0.14,
            "depth": 0.96,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 55
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/edge-trim-suction-group/trim-suction-pipe",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/edge-trim-suction-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.18,
        0.52,
        -0.58,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/edge-trim-suction-group/trim-suction-pipe",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "port",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 56
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/edge-trim-suction-group/trim-suction-flange",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/edge-trim-suction-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.18,
        0.52,
        -0.67,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/edge-trim-suction-group/trim-suction-flange",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "port",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 57
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "knife-cassette-drawer",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 58
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/h01-05-electrode-slitter:knife-cassette-center",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.02,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter:knife-cassette-center"
      },
      "gltfNode": 59
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/cassette-housing-post-front",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.01,
        0.44,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/cassette-housing-post-front",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.42,
            "height": 0.54,
            "depth": 0.06,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 60
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/cassette-housing-post-rear",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.01,
        -0.44,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/cassette-housing-post-rear",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.42,
            "height": 0.54,
            "depth": 0.06,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 61
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/cassette-base-sled",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.735,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/cassette-base-sled",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.44,
            "height": 0.05,
            "depth": 0.94,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 62
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/cassette-pull-handle",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.01,
        0.495,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/cassette-pull-handle",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "fastener",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.036,
            "depth": 0.06,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 63
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.94,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "lower-knife-arbor-rotor",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 64
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor/lower-arbor-shaft",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor/lower-arbor-shaft",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 65
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor/lower-arbor-key",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor/lower-arbor-key",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.016,
            "height": 0.09,
            "depth": 0.88,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 66
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor/lower-rotary-knife-1",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        -0.32,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor/lower-rotary-knife-1",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 67
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor/lower-rotary-knife-2",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        -0.16,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor/lower-rotary-knife-2",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 68
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor/lower-rotary-knife-3",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor/lower-rotary-knife-3",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 69
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor/lower-rotary-knife-4",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0.16,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor/lower-rotary-knife-4",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 70
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor/lower-rotary-knife-5",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/lower-knife-arbor-rotor/lower-rotary-knife-5",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 71
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.1,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "upper-knife-arbor-rotor",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 72
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor/upper-arbor-shaft",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor/upper-arbor-shaft",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 73
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor/upper-arbor-key",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor/upper-arbor-key",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.016,
            "height": 0.09,
            "depth": 0.88,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 74
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor/upper-rotary-knife-1",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        -0.312,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor/upper-rotary-knife-1",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 75
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor/upper-rotary-knife-2",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        -0.152,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor/upper-rotary-knife-2",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 76
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor/upper-rotary-knife-3",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0.008,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor/upper-rotary-knife-3",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 77
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor/upper-rotary-knife-4",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0.168,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor/upper-rotary-knife-4",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 78
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor/upper-rotary-knife-5",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0.328,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/knife-cassette-drawer/upper-knife-arbor-rotor/upper-rotary-knife-5",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 79
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/mother-roll-rotor",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.08,
        0.78,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "mother-roll-rotor",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 80
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/mother-roll-rotor/mother-core-sleeve",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/mother-roll-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/mother-roll-rotor/mother-core-sleeve",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 81
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/mother-roll-rotor/mother-jumbo-coil",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/mother-roll-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/mother-roll-rotor/mother-jumbo-coil",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 82
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/mother-roll-rotor/mother-index-lug",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/mother-roll-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.26,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/mother-roll-rotor/mother-index-lug",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.04,
            "depth": 0.8,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 83
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/upper-rewinder-rotor",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.95,
        1.18,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "upper-rewinder-rotor",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 84
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/upper-rewinder-rotor/upper-friction-shaft-core",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/upper-rewinder-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/upper-rewinder-rotor/upper-friction-shaft-core",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 85
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/upper-rewinder-rotor/upper-friction-lug",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/upper-rewinder-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.105,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/upper-rewinder-rotor/upper-friction-lug",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.02,
            "height": 0.036,
            "depth": 0.84,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 86
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/upper-rewinder-rotor/upper-slit-pancake-1",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/upper-rewinder-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.24,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/upper-rewinder-rotor/upper-slit-pancake-1",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 87
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/upper-rewinder-rotor/upper-slit-pancake-2",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/upper-rewinder-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.08,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/upper-rewinder-rotor/upper-slit-pancake-2",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 88
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/lower-rewinder-rotor",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.95,
        0.68,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "lower-rewinder-rotor",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 89
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/lower-rewinder-rotor/lower-friction-shaft-core",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/lower-rewinder-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/lower-rewinder-rotor/lower-friction-shaft-core",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 90
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/lower-rewinder-rotor/lower-friction-lug",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/lower-rewinder-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.105,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/lower-rewinder-rotor/lower-friction-lug",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.02,
            "height": 0.036,
            "depth": 0.84,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 91
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/lower-rewinder-rotor/lower-slit-pancake-1",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/lower-rewinder-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.08,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/lower-rewinder-rotor/lower-slit-pancake-1",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 92
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/lower-rewinder-rotor/lower-slit-pancake-2",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/lower-rewinder-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.24,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/lower-rewinder-rotor/lower-slit-pancake-2",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "guide",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 93
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/unloading-pusher-carrier",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.95,
        0.93,
        -0.38,
        1
      ],
      "sourceUserData": {
        "partId": "unloading-pusher-carrier",
        "componentRole": "actuator",
        "BOMqty": 1
      },
      "gltfNode": 94
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/unloading-pusher-carrier/h01-05-electrode-slitter:unloading-pusher-plate",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/unloading-pusher-carrier",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter:unloading-pusher-plate"
      },
      "gltfNode": 95
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/unloading-pusher-carrier/pusher-main-yoke",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/unloading-pusher-carrier",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/unloading-pusher-carrier/pusher-main-yoke",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.16,
            "depth": 0.06,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 96
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/unloading-pusher-carrier/pusher-fork-upper",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/unloading-pusher-carrier",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.13,
        0.02,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/unloading-pusher-carrier/pusher-fork-upper",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.24,
            "height": 0.05,
            "depth": 0.04,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 97
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/unloading-pusher-carrier/pusher-fork-lower",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/unloading-pusher-carrier",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.13,
        0.02,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/unloading-pusher-carrier/pusher-fork-lower",
        "assetId": "h01-05-electrode-slitter",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.24,
            "height": 0.05,
            "depth": 0.04,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 98
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/h01-05-electrode-slitter:mother-roll-entry",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.42,
        0.78,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter:mother-roll-entry"
      },
      "gltfNode": 99
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/h01-05-electrode-slitter:upper-rewinder-exit",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.32,
        1.18,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter:upper-rewinder-exit"
      },
      "gltfNode": 100
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/h01-05-electrode-slitter:lower-rewinder-exit",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.32,
        0.68,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter:lower-rewinder-exit"
      },
      "gltfNode": 101
    },
    {
      "id": "h01-05-electrode-slitter/h01-05-electrode-slitter:base/h01-05-electrode-slitter:trim-scrap-suction",
      "parent": "h01-05-electrode-slitter/h01-05-electrode-slitter:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.18,
        0.52,
        -0.68,
        1
      ],
      "sourceUserData": {
        "partId": "h01-05-electrode-slitter:trim-scrap-suction"
      },
      "gltfNode": 102
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "H01-05 전극 슬리터 설계 지침(레벨링 마운트 관통홀 정밀 베이스 프레임, 대구경 마더롤 언와인더 중공 코어 보어와 EPC 웹 가이드, 상·하 회전 원형 나이프 아버 카세트 및 측면 인출 가이드, 스크랩 트림 흡입 후드 덕트 중공 보어, 상·하 복열 프리션 샤프트 듀얼 리와인더 중공 코어 보어와 언로딩 푸셔 암, 비전 검사 카메라 브리지 및 전면 DS_Brand_Plate 명판)에 따른 자체 설계"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S19 Fraunhofer ITWM Simulation of Lithium Ion Cells and Battery Packs",
      "url": "https://www.itwm.fraunhofer.de/en/departments/processes-materials/electrochemistry-batteries-fuel-cell-redox-flow/simulation-battery-production.html",
      "basis": "제품군 분류 참고; 열람하지 않음"
    }
  ],
  "rights": {
    "id": "h01-05-electrode-slitter",
    "assetTypeId": "h01-05-electrode-slitter",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:da103d5645f31559e36bea96c030ebf20008575b6dac84dffe2f06c6c6abda0b",
    "modelSource": "kit/models/h01-05-electrode-slitter.mjs",
    "dslExampleSource": "dsl/models/h01-05-electrode-slitter.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/h01-05-electrode-slitter.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/h01-05-electrode-slitter.txt",
      "sha256": "sha256:eb214f8eb000f66ce98a81dc23c22798184613ae9d3aecf0aced73be0370b36b",
      "bytes": 806
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/h01-05-electrode-slitter/model.glb",
      "bytes": 1250192,
      "sha256": "sha256:cc416c6f58a48a916b3d105a8964ae85d5423dc3ad960a97df3b3460384412d9"
    },
    "licenses": [
      {
        "path": "open-assets/h01-05-electrode-slitter/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/h01-05-electrode-slitter/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/h01-05-electrode-slitter/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/h01-05-electrode-slitter/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/h01-05-electrode-slitter/LICENSES/ASSET-NOTICES/h01-05-electrode-slitter.txt",
        "bytes": 806,
        "sha256": "sha256:eb214f8eb000f66ce98a81dc23c22798184613ae9d3aecf0aced73be0370b36b"
      }
    ],
    "source": {
      "path": "kit/models/h01-05-electrode-slitter.mjs",
      "bytes": 25911,
      "sha256": "sha256:7aa3cb203ca57d8137f056c574f38142a4047d9ba579a88ad7b578a76c4d9917"
    },
    "ds2": {
      "path": "dsl/models/h01-05-electrode-slitter.ds2",
      "bytes": 3705,
      "sha256": "sha256:50c254f0bb9422778022d7e2f5279779a251450976444f9cab0ce3d7c21f7153",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 103,
    "triangles": 47992,
    "maxMatrixError": 9.992007221626409e-16,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 13,
    "nodeComparisons": 1339,
    "semanticFrameComparisons": 91,
    "acceptanceCases": 4,
    "acceptanceFrameComparisons": 28,
    "maxMotionMatrixError": 9.992007221626409e-16
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "h01-05-electrode-slitter",
    "kind": "equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "H 배터리 / H01 전극 제조",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "inlet": {
        "frameId": "mother-roll-entry",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -1.42,
            0.78,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "outlet": {
        "frameId": "upper-rewinder-exit",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            1.32,
            1.18,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "work": {
        "frameId": "lower-rewinder-exit",
        "portClass": "process",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            1.32,
            0.68,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "exhaust": {
        "frameId": "trim-scrap-suction",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0.18,
            0.52,
            -0.68
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
