{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "h01-03-continuous-electrode-dryer",
  "assetTypeId": "h01-03-continuous-electrode-dryer",
  "label": "전극 연속 건조기",
  "category": "H 배터리",
  "description": "레벨링 풋 볼트 관통홀을 갖춘 장축 모듈형 철골 지지 프레임, 다중 온도 존(Zone 1~4) 단열 오븐 체임버와 원형 관측창(실제 관통 개구부) 및 측면 클램프 해치 도어(관절 hatch_door), 양 끝단 전극 웹 통과 슬롯 개구부와 내부 상·하부 에어 플로테이션 노즐 바(관절 nozzle_gap) 및 가이드 롤 축(관절 guide_rolls), 상부 급·배기 열풍 덕트 매니폴드·NMP 회수 배기구(중공 보어) 및 외벽 DS 브랜드 입체 명판을 갖춘 전극 연속 건조기.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -2.8499999046325684,
      -4.7761223280354606e-17,
      -0.7799999713897705
    ],
    "max": [
      2.8499999046325684,
      2.400000000208616,
      0.7799999713897705
    ]
  },
  "size": [
    5.699999809265137,
    2.400000000208616,
    1.559999942779541
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 62,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 4,
      "blindSocketHeads": 18,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 12,
    "warnings": [],
    "changedMeshes": 84,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 90496,
      "afterTriangles": 79744,
      "reachedTarget": true,
      "changedMeshes": 16,
      "changes": [
        {
          "meshes": [
            "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-1/guide-roll-key-1",
            "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-2/guide-roll-key-2",
            "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-3/guide-roll-key-3",
            "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-4/guide-roll-key-4",
            "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-5/guide-roll-key-5"
          ],
          "radiusM": 0.002,
          "dimensionsM": [
            0.022,
            0.11,
            0.9
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-divider-strip-1",
            "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-divider-strip-2",
            "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-divider-strip-3"
          ],
          "radiusM": 0.002,
          "dimensionsM": [
            0.05,
            1,
            0.024
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-top-Z1",
            "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-bot-Z1",
            "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-top-Z3",
            "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-bot-Z3",
            "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-top-Z4",
            "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-bot-Z4"
          ],
          "radiusM": 0.003,
          "dimensionsM": [
            0.96,
            0.036,
            0.02
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/upper-nozzle-header-beam-F",
            "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/upper-nozzle-header-beam-R"
          ],
          "radiusM": 0.003,
          "dimensionsM": [
            4.6,
            0.05,
            0.05
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        }
      ],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/h01-03-continuous-electrode-dryer.mjs",
    "sourceSha256": "sha256:dcb8e04cf13084f8b991d1168dc30cb720b4709a1092b4ed618c5f1e64de7bc9",
    "deliverySha256": "sha256:dcb8e04cf13084f8b991d1168dc30cb720b4709a1092b4ed618c5f1e64de7bc9",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:5eb7654fca1ec0a65c67575aa4581b57a507f7b30f81ba97f07f481651b0ac9b",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:5eb7654fca1ec0a65c67575aa4581b57a507f7b30f81ba97f07f481651b0ac9b",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [],
  "parameterValues": {},
  "joints": [
    {
      "id": "hatch_door",
      "label": "측면 클램프 해치 도어 스윙 개폐",
      "kind": "revolute",
      "axis": [
        0,
        -1,
        0
      ],
      "unit": "rad",
      "min": 0,
      "max": 1.57,
      "initial": 0
    },
    {
      "id": "nozzle_gap",
      "label": "상부 에어 플로테이션 노즐 바 간격 조절 (Y축)",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "unit": "m",
      "min": -0.02,
      "max": 0.06,
      "initial": 0
    },
    {
      "id": "guide_rolls",
      "label": "전극 웹 지지 가이드 롤 축 연동 회전",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "unit": "rad",
      "min": -6.283185307179586,
      "max": 6.283185307179586,
      "initial": 0
    }
  ],
  "initialState": {
    "hatch_door": 0,
    "nozzle_gap": 0,
    "guide_rolls": 0
  },
  "bindings": [
    {
      "id": "hatch_door",
      "kind": "revolute",
      "axis": [
        0,
        -1,
        0
      ],
      "zeroPosition": [
        -1.15,
        1.25,
        0.68
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group",
      "gltfNode": 73
    },
    {
      "id": "nozzle_gap",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier",
      "gltfNode": 90
    },
    {
      "id": "guide_rolls",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -2.75,
        1.18,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-1",
      "gltfNode": 102
    },
    {
      "id": "guide_rolls",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -1.3,
        1.18,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-2",
      "gltfNode": 106
    },
    {
      "id": "guide_rolls",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        1.18,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-3",
      "gltfNode": 110
    },
    {
      "id": "guide_rolls",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        1.3,
        1.18,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-4",
      "gltfNode": 114
    },
    {
      "id": "guide_rolls",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        2.75,
        1.18,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-5",
      "gltfNode": 118
    }
  ],
  "jointBindings": [
    {
      "id": "hatch_door",
      "kind": "revolute",
      "axis": [
        0,
        -1,
        0
      ],
      "zeroPosition": [
        -1.15,
        1.25,
        0.68
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group",
      "gltfNode": 73
    },
    {
      "id": "nozzle_gap",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier",
      "gltfNode": 90
    },
    {
      "id": "guide_rolls",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -2.75,
        1.18,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-1",
      "gltfNode": 102
    },
    {
      "id": "guide_rolls",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -1.3,
        1.18,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-2",
      "gltfNode": 106
    },
    {
      "id": "guide_rolls",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        1.18,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-3",
      "gltfNode": 110
    },
    {
      "id": "guide_rolls",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        1.3,
        1.18,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-4",
      "gltfNode": 114
    },
    {
      "id": "guide_rolls",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        2.75,
        1.18,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-5",
      "gltfNode": 118
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base",
      "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "hatch-door-frame": {
      "id": "hatch-door-frame",
      "node": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group/h01-03-continuous-electrode-dryer:hatch-door-frame",
      "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group/h01-03-continuous-electrode-dryer:hatch-door-frame",
      "gltfNode": 74,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.15,
        1.25,
        0.68,
        1
      ],
      "position": [
        -1.15,
        1.25,
        0.68
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "upper-nozzle-bar": {
      "id": "upper-nozzle-bar",
      "node": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/h01-03-continuous-electrode-dryer:upper-nozzle-bar",
      "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/h01-03-continuous-electrode-dryer:upper-nozzle-bar",
      "gltfNode": 91,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.33,
        0,
        1
      ],
      "position": [
        0,
        1.33,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "web-entry": {
      "id": "web-entry",
      "node": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/h01-03-continuous-electrode-dryer:web-entry",
      "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/h01-03-continuous-electrode-dryer:web-entry",
      "gltfNode": 148,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.9,
        1.25,
        0,
        1
      ],
      "position": [
        -2.9,
        1.25,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "web-exit": {
      "id": "web-exit",
      "node": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/h01-03-continuous-electrode-dryer:web-exit",
      "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/h01-03-continuous-electrode-dryer:web-exit",
      "gltfNode": 149,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.9,
        1.25,
        0,
        1
      ],
      "position": [
        2.9,
        1.25,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "nmp-exhaust-outlet": {
      "id": "nmp-exhaust-outlet",
      "node": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/h01-03-continuous-electrode-dryer:nmp-exhaust-outlet",
      "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/h01-03-continuous-electrode-dryer:nmp-exhaust-outlet",
      "gltfNode": 150,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3,
        2.4,
        0,
        1
      ],
      "position": [
        -1.3,
        2.4,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "hot-air-supply": {
      "id": "hot-air-supply",
      "node": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/h01-03-continuous-electrode-dryer:hot-air-supply",
      "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/h01-03-continuous-electrode-dryer:hot-air-supply",
      "gltfNode": 151,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3,
        2.4,
        0,
        1
      ],
      "position": [
        1.3,
        2.4,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    }
  },
  "ports": {
    "mount": "base",
    "inlet": "web-entry",
    "outlet": "web-exit",
    "supply": "hot-air-supply",
    "exhaust": "nmp-exhaust-outlet"
  },
  "nodes": [
    {
      "id": "h01-03-continuous-electrode-dryer",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "h01-03-continuous-electrode-dryer",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 62,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 4,
            "blindSocketHeads": 18,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 12,
          "warnings": [],
          "changedMeshes": 84,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 90496,
            "afterTriangles": 79744,
            "reachedTarget": true,
            "changedMeshes": 16,
            "changes": [
              {
                "meshes": [
                  "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-1/guide-roll-key-1",
                  "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-2/guide-roll-key-2",
                  "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-3/guide-roll-key-3",
                  "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-4/guide-roll-key-4",
                  "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-5/guide-roll-key-5"
                ],
                "radiusM": 0.002,
                "dimensionsM": [
                  0.022,
                  0.11,
                  0.9
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-divider-strip-1",
                  "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-divider-strip-2",
                  "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-divider-strip-3"
                ],
                "radiusM": 0.002,
                "dimensionsM": [
                  0.05,
                  1,
                  0.024
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-top-Z1",
                  "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-bot-Z1",
                  "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-top-Z3",
                  "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-bot-Z3",
                  "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-top-Z4",
                  "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-bot-Z4"
                ],
                "radiusM": 0.003,
                "dimensionsM": [
                  0.96,
                  0.036,
                  0.02
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/upper-nozzle-header-beam-F",
                  "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/upper-nozzle-header-beam-R"
                ],
                "radiusM": 0.003,
                "dimensionsM": [
                  4.6,
                  0.05,
                  0.05
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              }
            ],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "h01-03-continuous-electrode-dryer",
          "coordinate_profile": "lib3d-world/1",
          "label": "전극 연속 건조기",
          "category": "H 배터리 / H01 전극 제조",
          "summary": "레벨링 풋 볼트 관통홀을 갖춘 장축 모듈형 철골 지지 프레임, 다중 온도 존(Zone 1~4) 단열 오븐 체임버와 원형 관측창(실제 관통 개구부) 및 측면 클램프 해치 도어(관절 hatch_door), 양 끝단 전극 웹 통과 슬롯 개구부와 내부 상·하부 에어 플로테이션 노즐 바(관절 nozzle_gap) 및 가이드 롤 축(관절 guide_rolls), 상부 급·배기 열풍 덕트 매니폴드·NMP 회수 배기구(중공 보어) 및 외벽 DS 브랜드 입체 명판을 갖춘 전극 연속 건조기.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [],
          "joints": [
            {
              "id": "hatch_door",
              "label": "측면 클램프 해치 도어 스윙 개폐",
              "kind": "revolute",
              "axis": [
                0,
                -1,
                0
              ],
              "unit": "rad",
              "min": 0,
              "max": 1.57,
              "initial": 0
            },
            {
              "id": "nozzle_gap",
              "label": "상부 에어 플로테이션 노즐 바 간격 조절 (Y축)",
              "kind": "prismatic",
              "axis": [
                0,
                1,
                0
              ],
              "unit": "m",
              "min": -0.02,
              "max": 0.06,
              "initial": 0
            },
            {
              "id": "guide_rolls",
              "label": "전극 웹 지지 가이드 롤 축 연동 회전",
              "kind": "revolute",
              "axis": [
                0,
                0,
                1
              ],
              "unit": "rad",
              "min": -6.283185307179586,
              "max": 6.283185307179586,
              "initial": 0
            }
          ],
          "ports": {
            "mount": "base",
            "inlet": "web-entry",
            "outlet": "web-exit",
            "supply": "hot-air-supply",
            "exhaust": "nmp-exhaust-outlet"
          },
          "required_host_features": [
            "prismatic",
            "revolute"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "H01-03 전극 연속 건조기 설계 지침(레벨링 풋 관통홀 철골 프레임, 4존 단열 오븐 체임버와 측면 클램프 해치 도어 및 원형 관측창 개구부, 양 끝단 전극 웹 통과 슬롯과 상·하부 에어 플로테이션 노즐 바 및 가이드 롤 축, 상부 열풍 덕트 매니폴드와 NMP 회수 배기 중공 보어, 외벽 DS_Brand_Plate 명판)에 따른 자체 설계"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S19 Fraunhofer ITWM Simulation of Lithium Ion Cells and Battery Packs",
              "url": "https://www.itwm.fraunhofer.de/en/departments/processes-materials/electrochemistry-batteries-fuel-cell-redox-flow/simulation-battery-production.html",
              "basis": "제품군 분류 참고; 열람하지 않음"
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {},
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base",
          "hatch-door-frame": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group/h01-03-continuous-electrode-dryer:hatch-door-frame",
          "upper-nozzle-bar": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/h01-03-continuous-electrode-dryer:upper-nozzle-bar",
          "web-entry": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/h01-03-continuous-electrode-dryer:web-entry",
          "web-exit": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/h01-03-continuous-electrode-dryer:web-exit",
          "nmp-exhaust-outlet": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/h01-03-continuous-electrode-dryer:nmp-exhaust-outlet",
          "hot-air-supply": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/h01-03-continuous-electrode-dryer:hot-air-supply"
        },
        "jointBindings": [
          {
            "id": "hatch_door",
            "kind": "revolute",
            "axis": [
              0,
              -1,
              0
            ],
            "zeroPosition": [
              -1.15,
              1.25,
              0.68
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group"
          },
          {
            "id": "nozzle_gap",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier"
          },
          {
            "id": "guide_rolls",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              -2.75,
              1.18,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-1"
          },
          {
            "id": "guide_rolls",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              -1.3,
              1.18,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-2"
          },
          {
            "id": "guide_rolls",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0,
              1.18,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-3"
          },
          {
            "id": "guide_rolls",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              1.3,
              1.18,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-4"
          },
          {
            "id": "guide_rolls",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              2.75,
              1.18,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-5"
          }
        ],
        "joints": [
          {
            "id": "hatch_door",
            "label": "측면 클램프 해치 도어 스윙 개폐",
            "kind": "revolute",
            "axis": [
              0,
              -1,
              0
            ],
            "unit": "rad",
            "min": 0,
            "max": 1.57,
            "initial": 0,
            "value": 0
          },
          {
            "id": "nozzle_gap",
            "label": "상부 에어 플로테이션 노즐 바 간격 조절 (Y축)",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "unit": "m",
            "min": -0.02,
            "max": 0.06,
            "initial": 0,
            "value": 0
          },
          {
            "id": "guide_rolls",
            "label": "전극 웹 지지 가이드 롤 축 연동 회전",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "unit": "rad",
            "min": -6.283185307179586,
            "max": 6.283185307179586,
            "initial": 0,
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 34
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "H01-03 전극 연속 건조기 설계 지침(레벨링 풋 관통홀 철골 프레임, 4존 단열 오븐 체임버와 측면 클램프 해치 도어 및 원형 관측창 개구부, 양 끝단 전극 웹 통과 슬롯과 상·하부 에어 플로테이션 노즐 바 및 가이드 롤 축, 상부 열풍 덕트 매니폴드와 NMP 회수 배기 중공 보어, 외벽 DS_Brand_Plate 명판)에 따른 자체 설계"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S19 Fraunhofer ITWM Simulation of Lithium Ion Cells and Battery Packs",
            "url": "https://www.itwm.fraunhofer.de/en/departments/processes-materials/electrochemistry-batteries-fuel-cell-redox-flow/simulation-battery-production.html",
            "basis": "제품군 분류 참고; 열람하지 않음"
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "hatch_door": 0,
          "nozzle_gap": 0,
          "guide_rolls": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base",
      "parent": "h01-03-continuous-electrode-dryer",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer:base",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 1
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "dryer-support-frame-group",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 2
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/dryer-foot-plate",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/dryer-foot-plate",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 3
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-pillar-F1",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.5,
        0.375,
        0.62,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-pillar-F1",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.69,
            "depth": 0.1,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 4
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-pillar-R1",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.5,
        0.375,
        -0.62,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-pillar-R1",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.69,
            "depth": 0.1,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 5
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-crossbeam-1",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.5,
        0.67,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-crossbeam-1",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.1,
            "depth": 1.34,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 6
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-pillar-F2",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.25,
        0.375,
        0.62,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-pillar-F2",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.69,
            "depth": 0.1,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 7
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-pillar-R2",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.25,
        0.375,
        -0.62,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-pillar-R2",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.69,
            "depth": 0.1,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 8
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-crossbeam-2",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.25,
        0.67,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-crossbeam-2",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.1,
            "depth": 1.34,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 9
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-pillar-F3",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.375,
        0.62,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-pillar-F3",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.69,
            "depth": 0.1,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 10
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-pillar-R3",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.375,
        -0.62,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-pillar-R3",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.69,
            "depth": 0.1,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 11
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-crossbeam-3",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.67,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-crossbeam-3",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.1,
            "depth": 1.34,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 12
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-pillar-F4",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.25,
        0.375,
        0.62,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-pillar-F4",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.69,
            "depth": 0.1,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 13
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-pillar-R4",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.25,
        0.375,
        -0.62,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-pillar-R4",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.69,
            "depth": 0.1,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 14
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-crossbeam-4",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.25,
        0.67,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-crossbeam-4",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.1,
            "depth": 1.34,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 15
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-pillar-F5",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.5,
        0.375,
        0.62,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-pillar-F5",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.69,
            "depth": 0.1,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 16
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-pillar-R5",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.5,
        0.375,
        -0.62,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-pillar-R5",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.69,
            "depth": 0.1,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 17
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-crossbeam-5",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.5,
        0.67,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-crossbeam-5",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.1,
            "depth": 1.34,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 18
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-long-beam-front",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.67,
        0.62,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-long-beam-front",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 5.6,
            "height": 0.1,
            "depth": 0.08,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 2,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00002,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 19
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-long-beam-rear",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.67,
        -0.62,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/frame-long-beam-rear",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 5.6,
            "height": 0.1,
            "depth": 0.08,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 2,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00002,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 20
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/roll-stand-front-entry",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.75,
        0.96,
        0.5,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/roll-stand-front-entry",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "functionalInterface": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.56,
            "depth": 0.06,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "explicitPrimitiveRepair": {
          "schema": "lib3d-explicit-primitive-pilot/1",
          "id": "roll-stand-front-entry-approved-axial-passage",
          "sourceLFsha256": "sha256:b134b563aaf0dd68fa0a81cde82a63723fe46715814d3149b54ecbdb9da24730",
          "sdkSourceSha256": "sha256:b6a9f4e2b0d44c606dd051666ab9a9cb7e53c9cfd044b25d2b71c8f5ca469b01",
          "kind": "circular-passage",
          "scope": "OBJ_CANDIDATE_ONLY",
          "booleanRetriangulated": true
        }
      },
      "gltfNode": 21
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/roll-stand-rear-entry",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.75,
        0.96,
        -0.5,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/roll-stand-rear-entry",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "functionalInterface": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.56,
            "depth": 0.06,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "explicitPrimitiveRepair": {
          "schema": "lib3d-explicit-primitive-pilot/1",
          "id": "roll-stand-rear-entry-approved-axial-passage",
          "sourceLFsha256": "sha256:b134b563aaf0dd68fa0a81cde82a63723fe46715814d3149b54ecbdb9da24730",
          "sdkSourceSha256": "sha256:b6a9f4e2b0d44c606dd051666ab9a9cb7e53c9cfd044b25d2b71c8f5ca469b01",
          "kind": "circular-passage",
          "scope": "OBJ_CANDIDATE_ONLY",
          "booleanRetriangulated": true
        }
      },
      "gltfNode": 22
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/roll-stand-front-exit",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.75,
        0.96,
        0.5,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/roll-stand-front-exit",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "functionalInterface": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.56,
            "depth": 0.06,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "explicitPrimitiveRepair": {
          "schema": "lib3d-explicit-primitive-pilot/1",
          "id": "roll-stand-front-exit-approved-axial-passage",
          "sourceLFsha256": "sha256:b134b563aaf0dd68fa0a81cde82a63723fe46715814d3149b54ecbdb9da24730",
          "sdkSourceSha256": "sha256:b6a9f4e2b0d44c606dd051666ab9a9cb7e53c9cfd044b25d2b71c8f5ca469b01",
          "kind": "circular-passage",
          "scope": "OBJ_CANDIDATE_ONLY",
          "booleanRetriangulated": true
        }
      },
      "gltfNode": 23
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/roll-stand-rear-exit",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.75,
        0.96,
        -0.5,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-support-frame-group/roll-stand-rear-exit",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "functionalInterface": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.56,
            "depth": 0.06,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "explicitPrimitiveRepair": {
          "schema": "lib3d-explicit-primitive-pilot/1",
          "id": "roll-stand-rear-exit-approved-axial-passage",
          "sourceLFsha256": "sha256:b134b563aaf0dd68fa0a81cde82a63723fe46715814d3149b54ecbdb9da24730",
          "sdkSourceSha256": "sha256:b6a9f4e2b0d44c606dd051666ab9a9cb7e53c9cfd044b25d2b71c8f5ca469b01",
          "kind": "circular-passage",
          "scope": "OBJ_CANDIDATE_ONLY",
          "booleanRetriangulated": true
        }
      },
      "gltfNode": 24
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "dryer-chamber-group",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 25
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/dryer-insulated-floor",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.76,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/dryer-insulated-floor",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 5.2,
            "height": 0.08,
            "depth": 1.36,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 26
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/dryer-end-wall-entry",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.6,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/dryer-end-wall-entry",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 27
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/dryer-end-wall-exit",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.52,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/dryer-end-wall-exit",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 28
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/dryer-front-wall",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.65,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/dryer-front-wall",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 29
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-window-bezel-Z1",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.95,
        1.25,
        0.688,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-window-bezel-Z1",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 30
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-top-Z1",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.95,
        1.56,
        0.686,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-top-Z1",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.96,
            "height": 0.036,
            "depth": 0.02,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 31
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-bot-Z1",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.95,
        0.94,
        0.686,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-bot-Z1",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.96,
            "height": 0.036,
            "depth": 0.02,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 32
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-window-bezel-Z3",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.65,
        1.25,
        0.688,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-window-bezel-Z3",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 33
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-top-Z3",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.65,
        1.56,
        0.686,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-top-Z3",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.96,
            "height": 0.036,
            "depth": 0.02,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 34
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-bot-Z3",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.65,
        0.94,
        0.686,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-bot-Z3",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.96,
            "height": 0.036,
            "depth": 0.02,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 35
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-window-bezel-Z4",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.95,
        1.25,
        0.688,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-window-bezel-Z4",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 36
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-top-Z4",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.95,
        1.56,
        0.686,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-top-Z4",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.96,
            "height": 0.036,
            "depth": 0.02,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 37
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-bot-Z4",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.95,
        0.94,
        0.686,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-hatch-trim-bot-Z4",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.96,
            "height": 0.036,
            "depth": 0.02,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 38
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-divider-strip-1",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3,
        1.3,
        0.688,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-divider-strip-1",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 1,
            "depth": 0.024,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 39
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-divider-strip-2",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.3,
        0.688,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-divider-strip-2",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 1,
            "depth": 0.024,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 40
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-divider-strip-3",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3,
        1.3,
        0.688,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/zone-divider-strip-3",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 1,
            "depth": 0.024,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 41
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/dryer-rear-wall",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.65,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/dryer-rear-wall",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 42
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/dryer-roof-panel",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.8,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/dryer-roof-panel",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 43
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.72,
        0.685,
        1
      ],
      "sourceUserData": {
        "partId": "DS_Brand_Plate",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 44
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate/badge-bezel",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate/badge-bezel",
        "assetId": "h01-03-continuous-electrode-dryer",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 45
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate/badge-backing",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate/badge-backing",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 46
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate/badge-rivet-0",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.18525,
        -0.050249999999999996,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate/badge-rivet-0",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 47
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate/badge-rivet-1",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.18525,
        0.050249999999999996,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate/badge-rivet-1",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 48
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate/badge-rivet-2",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.18525,
        -0.050249999999999996,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate/badge-rivet-2",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 49
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate/badge-rivet-3",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.18525,
        0.050249999999999996,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate/badge-rivet-3",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 50
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate/badge-D",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.087,
        0,
        0,
        0,
        0,
        0.087,
        0,
        0,
        0,
        0,
        0.0045000000000000005,
        0,
        -0.038279999999999995,
        0,
        0.004325,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate/badge-D",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 51
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate/badge-S",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.087,
        0,
        0,
        0,
        0,
        0.087,
        0,
        0,
        0,
        0,
        0.0045000000000000005,
        0,
        0.038279999999999995,
        0,
        0.004325,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate/badge-S",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 52
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate/badge-D-back",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.087,
        0,
        -1.0654427152581972e-17,
        0,
        0,
        0.087,
        0,
        0,
        5.51091059616309e-19,
        0,
        -0.0045000000000000005,
        0,
        0.038279999999999995,
        0,
        -0.004325,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate/badge-D-back",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 53
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate/badge-S-back",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.087,
        0,
        -1.0654427152581972e-17,
        0,
        0,
        0.087,
        0,
        0,
        5.51091059616309e-19,
        0,
        -0.0045000000000000005,
        0,
        -0.038279999999999995,
        0,
        -0.004325,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/DS_Brand_Plate/badge-S-back",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 54
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x-195-0",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.8239999999999998,
        1.25,
        0.702,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x-195-0",
        "assetId": "h01-03-continuous-electrode-dryer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 55
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x-195-1",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.887,
        1.3591192008768394,
        0.702,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x-195-1",
        "assetId": "h01-03-continuous-electrode-dryer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 56
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x-195-2",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -2.013,
        1.3591192008768394,
        0.702,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x-195-2",
        "assetId": "h01-03-continuous-electrode-dryer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 57
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x-195-3",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -2.076,
        1.25,
        0.702,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x-195-3",
        "assetId": "h01-03-continuous-electrode-dryer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 58
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x-195-4",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -2.013,
        1.1408807991231606,
        0.702,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x-195-4",
        "assetId": "h01-03-continuous-electrode-dryer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 59
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x-195-5",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.887,
        1.1408807991231606,
        0.702,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x-195-5",
        "assetId": "h01-03-continuous-electrode-dryer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 60
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x65-0",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.776,
        1.25,
        0.702,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x65-0",
        "assetId": "h01-03-continuous-electrode-dryer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 61
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x65-1",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.7130000000000001,
        1.3591192008768394,
        0.702,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x65-1",
        "assetId": "h01-03-continuous-electrode-dryer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 62
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x65-2",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.5870000000000001,
        1.3591192008768394,
        0.702,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x65-2",
        "assetId": "h01-03-continuous-electrode-dryer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 63
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x65-3",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.524,
        1.25,
        0.702,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x65-3",
        "assetId": "h01-03-continuous-electrode-dryer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 64
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x65-4",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.587,
        1.1408807991231606,
        0.702,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x65-4",
        "assetId": "h01-03-continuous-electrode-dryer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 65
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x65-5",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.7130000000000001,
        1.1408807991231606,
        0.702,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x65-5",
        "assetId": "h01-03-continuous-electrode-dryer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 66
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x195-0",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        2.076,
        1.25,
        0.702,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x195-0",
        "assetId": "h01-03-continuous-electrode-dryer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 67
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x195-1",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        2.013,
        1.3591192008768394,
        0.702,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x195-1",
        "assetId": "h01-03-continuous-electrode-dryer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 68
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x195-2",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.887,
        1.3591192008768394,
        0.702,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x195-2",
        "assetId": "h01-03-continuous-electrode-dryer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 69
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x195-3",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.8239999999999998,
        1.25,
        0.702,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x195-3",
        "assetId": "h01-03-continuous-electrode-dryer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 70
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x195-4",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.887,
        1.1408807991231606,
        0.702,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x195-4",
        "assetId": "h01-03-continuous-electrode-dryer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 71
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x195-5",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        2.013,
        1.1408807991231606,
        0.702,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/dryer-chamber-group/sight-bolts-x195-5",
        "assetId": "h01-03-continuous-electrode-dryer",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 72
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.15,
        1.25,
        0.68,
        1
      ],
      "sourceUserData": {
        "partId": "hatch-door-group",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 73
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group/h01-03-continuous-electrode-dryer:hatch-door-frame",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer:hatch-door-frame"
      },
      "gltfNode": 74
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group/hatch-door-slab",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.022,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group/hatch-door-slab",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 75
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group/hatch-door-sight-bezel",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.5,
        0,
        0.05,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group/hatch-door-sight-bezel",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 76
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group/hatch-clamp-latch-upper",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.94,
        0.22,
        0.055,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group/hatch-clamp-latch-upper",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "fastener",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.045,
            "depth": 0.045,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 77
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group/hatch-clamp-latch-lower",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.94,
        -0.22,
        0.055,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group/hatch-clamp-latch-lower",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "fastener",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.045,
            "depth": 0.045,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 78
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group/hatch-hinge-pin-upper",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.24,
        0.015,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group/hatch-hinge-pin-upper",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 79
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group/hatch-hinge-pin-lower",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.24,
        0.015,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/hatch-door-group/hatch-hinge-pin-lower",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 80
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "lower-nozzle-bars-group",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 81
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group/air-nozzle-lower-1",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.2,
        1.135,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group/air-nozzle-lower-1",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.07,
            "depth": 0.92,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 82
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group/air-nozzle-lower-2",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.65,
        1.135,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group/air-nozzle-lower-2",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.07,
            "depth": 0.92,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 83
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group/air-nozzle-lower-3",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.95,
        1.135,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group/air-nozzle-lower-3",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.07,
            "depth": 0.92,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 84
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group/air-nozzle-lower-4",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.35,
        1.135,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group/air-nozzle-lower-4",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.07,
            "depth": 0.92,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 85
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group/air-nozzle-lower-5",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.35,
        1.135,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group/air-nozzle-lower-5",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.07,
            "depth": 0.92,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 86
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group/air-nozzle-lower-6",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.95,
        1.135,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group/air-nozzle-lower-6",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.07,
            "depth": 0.92,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 87
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group/air-nozzle-lower-7",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.65,
        1.135,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group/air-nozzle-lower-7",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.07,
            "depth": 0.92,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 88
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group/air-nozzle-lower-8",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.2,
        1.135,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/lower-nozzle-bars-group/air-nozzle-lower-8",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.07,
            "depth": 0.92,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 89
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "upper-nozzle-carrier",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 90
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/h01-03-continuous-electrode-dryer:upper-nozzle-bar",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.33,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer:upper-nozzle-bar"
      },
      "gltfNode": 91
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/upper-nozzle-header-beam-F",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.44,
        0.42,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/upper-nozzle-header-beam-F",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 4.6,
            "height": 0.05,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 92
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/upper-nozzle-header-beam-R",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.44,
        -0.42,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/upper-nozzle-header-beam-R",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 4.6,
            "height": 0.05,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 93
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/air-nozzle-upper-1",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.2,
        1.365,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/air-nozzle-upper-1",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.07,
            "depth": 0.92,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 94
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/air-nozzle-upper-2",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.65,
        1.365,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/air-nozzle-upper-2",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.07,
            "depth": 0.92,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 95
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/air-nozzle-upper-3",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.95,
        1.365,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/air-nozzle-upper-3",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.07,
            "depth": 0.92,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 96
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/air-nozzle-upper-4",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.35,
        1.365,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/air-nozzle-upper-4",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.07,
            "depth": 0.92,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 97
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/air-nozzle-upper-5",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.35,
        1.365,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/air-nozzle-upper-5",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.07,
            "depth": 0.92,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 98
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/air-nozzle-upper-6",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.95,
        1.365,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/air-nozzle-upper-6",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.07,
            "depth": 0.92,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 99
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/air-nozzle-upper-7",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.65,
        1.365,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/air-nozzle-upper-7",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.07,
            "depth": 0.92,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 100
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/air-nozzle-upper-8",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.2,
        1.365,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/upper-nozzle-carrier/air-nozzle-upper-8",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.07,
            "depth": 0.92,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 101
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-1",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.75,
        1.18,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "guide-roll-rotor-1",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 102
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-1/guide-roll-barrel-1",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-1/guide-roll-barrel-1",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 103
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-1/guide-roll-shaft-1",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-1/guide-roll-shaft-1",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 104
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-1/guide-roll-key-1",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-1",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-1/guide-roll-key-1",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.11,
            "depth": 0.9,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 105
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-2",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3,
        1.18,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "guide-roll-rotor-2",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 106
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-2/guide-roll-barrel-2",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-2",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-2/guide-roll-barrel-2",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 107
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-2/guide-roll-shaft-2",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-2",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-2/guide-roll-shaft-2",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 108
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-2/guide-roll-key-2",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-2",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-2/guide-roll-key-2",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.11,
            "depth": 0.9,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 109
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-3",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.18,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "guide-roll-rotor-3",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 110
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-3/guide-roll-barrel-3",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-3",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-3/guide-roll-barrel-3",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 111
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-3/guide-roll-shaft-3",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-3",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-3/guide-roll-shaft-3",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 112
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-3/guide-roll-key-3",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-3",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-3/guide-roll-key-3",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.11,
            "depth": 0.9,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 113
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-4",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3,
        1.18,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "guide-roll-rotor-4",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 114
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-4/guide-roll-barrel-4",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-4",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-4/guide-roll-barrel-4",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 115
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-4/guide-roll-shaft-4",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-4",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-4/guide-roll-shaft-4",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 116
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-4/guide-roll-key-4",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-4",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-4/guide-roll-key-4",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.11,
            "depth": 0.9,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 117
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-5",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.75,
        1.18,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "guide-roll-rotor-5",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 118
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-5/guide-roll-barrel-5",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-5",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-5/guide-roll-barrel-5",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 119
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-5/guide-roll-shaft-5",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-5",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-5/guide-roll-shaft-5",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 120
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-5/guide-roll-key-5",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-5",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/guide-roll-rotor-5/guide-roll-key-5",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.11,
            "depth": 0.9,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 121
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "rooftop-manifold-group",
        "componentRole": "port",
        "BOMqty": 1
      },
      "gltfNode": 122
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-heater-plenum-Z1",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.95,
        2.02,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-heater-plenum-Z1",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.82,
            "height": 0.28,
            "depth": 0.86,
            "radius": 0.005,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 123
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-blower-motor-Z1",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.95,
        2.04,
        -0.58,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-blower-motor-Z1",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.11,
            "topRadius": 0.11,
            "height": 0.28,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 124
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-heater-plenum-Z2",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.65,
        2.02,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-heater-plenum-Z2",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.82,
            "height": 0.28,
            "depth": 0.86,
            "radius": 0.005,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 125
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-blower-motor-Z2",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.65,
        2.04,
        -0.58,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-blower-motor-Z2",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.11,
            "topRadius": 0.11,
            "height": 0.28,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 126
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-heater-plenum-Z3",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.65,
        2.02,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-heater-plenum-Z3",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.82,
            "height": 0.28,
            "depth": 0.86,
            "radius": 0.005,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 127
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-blower-motor-Z3",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.65,
        2.04,
        -0.58,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-blower-motor-Z3",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.11,
            "topRadius": 0.11,
            "height": 0.28,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 128
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-heater-plenum-Z4",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.95,
        2.02,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-heater-plenum-Z4",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.82,
            "height": 0.28,
            "depth": 0.86,
            "radius": 0.005,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 129
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-blower-motor-Z4",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.95,
        2.04,
        -0.58,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-blower-motor-Z4",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.11,
            "topRadius": 0.11,
            "height": 0.28,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 130
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/supply-header-duct-front",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.22,
        0.32,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/supply-header-duct-front",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "port",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 4.4,
            "height": 0.16,
            "depth": 0.18,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 131
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/exhaust-header-duct-rear",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.22,
        -0.32,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/exhaust-header-duct-rear",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "port",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 4.4,
            "height": 0.16,
            "depth": 0.18,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 132
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/nmp-exhaust-pipe",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3,
        1.88,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/nmp-exhaust-pipe",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "port",
        "BOMqty": 1
      },
      "gltfNode": 133
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/nmp-exhaust-flange",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3,
        2.376,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/nmp-exhaust-flange",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "port",
        "BOMqty": 1
      },
      "gltfNode": 134
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/hot-air-supply-pipe",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3,
        1.88,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/hot-air-supply-pipe",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "port",
        "BOMqty": 1
      },
      "gltfNode": 135
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/hot-air-supply-flange",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3,
        2.376,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/hot-air-supply-flange",
        "assetId": "h01-03-continuous-electrode-dryer",
        "componentRole": "port",
        "BOMqty": 1
      },
      "gltfNode": 136
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-temp-sensor-harness",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-temp-sensor-harness",
        "assetId": "h01-03-continuous-electrode-dryer"
      },
      "gltfNode": 137
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-temp-sensor-harness-rib-2",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.0003177287614767321,
        -0.017822115752932906,
        -0.9998411229983107,
        0,
        -0.017822115752932906,
        0.9996822712385232,
        -0.017824947727183068,
        0,
        0.9998411229983107,
        0.017824947727183068,
        0,
        0,
        -1.6108714997179974,
        2.165720406102052,
        0.43,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-temp-sensor-harness-rib-2",
        "assetId": "h01-03-continuous-electrode-dryer"
      },
      "gltfNode": 138
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-temp-sensor-harness-rib-4",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.0002933415134402928,
        -0.017124703331646878,
        -0.9998533184855466,
        0,
        -0.017124703331646878,
        0.9997066584865596,
        -0.01712721557756617,
        0,
        0.9998533184855466,
        0.01712721557756617,
        -2.220446049250313e-16,
        0,
        -1.271744137377528,
        2.1717367032615766,
        0.43,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-temp-sensor-harness-rib-4",
        "assetId": "h01-03-continuous-electrode-dryer"
      },
      "gltfNode": 139
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-temp-sensor-harness-rib-6",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.00017660644503914025,
        -0.013288162220662954,
        -0.9999116928784065,
        0,
        -0.013288162220662954,
        0.999823393554961,
        -0.01328933576365213,
        0,
        0.9999116928784065,
        0.01328933576365213,
        1.1102230246251565e-16,
        0,
        -0.9326138163890727,
        2.176983683671672,
        0.43,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-temp-sensor-harness-rib-6",
        "assetId": "h01-03-continuous-electrode-dryer"
      },
      "gltfNode": 140
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-temp-sensor-harness-rib-8",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.00004931930984564126,
        -0.007022597628455222,
        -0.9999753400410203,
        0,
        -0.007022597628455222,
        0.9999506806901545,
        -0.007022770809695312,
        0,
        0.9999753400410203,
        0.007022770809695312,
        1.1102230246251565e-16,
        0,
        -0.5934797210550732,
        2.180415842110498,
        0.43,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-temp-sensor-harness-rib-8",
        "assetId": "h01-03-continuous-electrode-dryer"
      },
      "gltfNode": 141
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-temp-sensor-harness-rib-10",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.000009058466398870202,
        -0.003009714993622518,
        -0.9999954707565435,
        0,
        -0.003009714993622518,
        0.9999909415336014,
        -0.0030097286254162003,
        0,
        0.9999954707565435,
        0.0030097286254162003,
        2.220446049250313e-16,
        0,
        -0.2543510119462464,
        2.182117014380716,
        0.43,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-temp-sensor-harness-rib-10",
        "assetId": "h01-03-continuous-electrode-dryer"
      },
      "gltfNode": 142
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-temp-sensor-harness-rib-12",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.0000010064922151276079,
        0.0010032403510599607,
        -0.9999994967537659,
        0,
        0.0010032403510599607,
        0.999998993507785,
        0.0010032408559371435,
        0,
        0.9999994967537659,
        -0.0010032408559371435,
        1.1102230246251565e-16,
        0,
        0.08478384131978212,
        2.1824572488347598,
        0.43,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-temp-sensor-harness-rib-12",
        "assetId": "h01-03-continuous-electrode-dryer"
      },
      "gltfNode": 143
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-temp-sensor-harness-rib-14",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.000025162609280315884,
        0.005016171460724451,
        -0.9999874186162143,
        0,
        0.005016171460724451,
        0.9999748373907197,
        0.00501623457189676,
        0,
        0.9999874186162143,
        -0.00501623457189676,
        0,
        0,
        0.42391664653341044,
        2.181436545472629,
        0.43,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-temp-sensor-harness-rib-14",
        "assetId": "h01-03-continuous-electrode-dryer"
      },
      "gltfNode": 144
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-temp-sensor-harness-rib-16",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.00010388728132826319,
        0.010191981591476511,
        -0.9999480550101948,
        0,
        0.010191981591476511,
        0.9998961127186717,
        0.010192511041358642,
        0,
        0.9999480550101948,
        -0.010192511041358642,
        0,
        0,
        0.7630462662176253,
        2.178985802656026,
        0.43,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-temp-sensor-harness-rib-16",
        "assetId": "h01-03-continuous-electrode-dryer"
      },
      "gltfNode": 145
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-temp-sensor-harness-rib-18",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.000243386637179821,
        0.015598955097202974,
        -0.999878299275877,
        0,
        0.015598955097202974,
        0.9997566133628203,
        0.015600853732399146,
        0,
        0.999878299275877,
        -0.015600853732399146,
        1.1102230246251565e-16,
        0,
        1.1021796027511437,
        2.1745229335482343,
        0.43,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-temp-sensor-harness-rib-18",
        "assetId": "h01-03-continuous-electrode-dryer"
      },
      "gltfNode": 146
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-temp-sensor-harness-rib-20",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.0003192852669813284,
        0.01786570244628405,
        -0.9998403446215893,
        0,
        0.01786570244628405,
        0.9996807147330191,
        0.01786855525723529,
        0,
        0.9998403446215893,
        -0.01786855525723529,
        4.440892098500626e-16,
        0,
        1.4413079323419156,
        2.1687581437875614,
        0.43,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/rooftop-manifold-group/zone-temp-sensor-harness-rib-20",
        "assetId": "h01-03-continuous-electrode-dryer"
      },
      "gltfNode": 147
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/h01-03-continuous-electrode-dryer:web-entry",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.9,
        1.25,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer:web-entry"
      },
      "gltfNode": 148
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/h01-03-continuous-electrode-dryer:web-exit",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.9,
        1.25,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer:web-exit"
      },
      "gltfNode": 149
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/h01-03-continuous-electrode-dryer:nmp-exhaust-outlet",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3,
        2.4,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer:nmp-exhaust-outlet"
      },
      "gltfNode": 150
    },
    {
      "id": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base/h01-03-continuous-electrode-dryer:hot-air-supply",
      "parent": "h01-03-continuous-electrode-dryer/h01-03-continuous-electrode-dryer:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3,
        2.4,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "h01-03-continuous-electrode-dryer:hot-air-supply"
      },
      "gltfNode": 151
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "H01-03 전극 연속 건조기 설계 지침(레벨링 풋 관통홀 철골 프레임, 4존 단열 오븐 체임버와 측면 클램프 해치 도어 및 원형 관측창 개구부, 양 끝단 전극 웹 통과 슬롯과 상·하부 에어 플로테이션 노즐 바 및 가이드 롤 축, 상부 열풍 덕트 매니폴드와 NMP 회수 배기 중공 보어, 외벽 DS_Brand_Plate 명판)에 따른 자체 설계"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S19 Fraunhofer ITWM Simulation of Lithium Ion Cells and Battery Packs",
      "url": "https://www.itwm.fraunhofer.de/en/departments/processes-materials/electrochemistry-batteries-fuel-cell-redox-flow/simulation-battery-production.html",
      "basis": "제품군 분류 참고; 열람하지 않음"
    }
  ],
  "rights": {
    "id": "h01-03-continuous-electrode-dryer",
    "assetTypeId": "h01-03-continuous-electrode-dryer",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:dcb8e04cf13084f8b991d1168dc30cb720b4709a1092b4ed618c5f1e64de7bc9",
    "modelSource": "kit/models/h01-03-continuous-electrode-dryer.mjs",
    "dslExampleSource": "dsl/models/h01-03-continuous-electrode-dryer.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/h01-03-continuous-electrode-dryer.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/h01-03-continuous-electrode-dryer.txt",
      "sha256": "sha256:ff5c062695a9faa0a003599adb1247c0e30aeb414f456c6a68a68245b709d287",
      "bytes": 815
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/h01-03-continuous-electrode-dryer/model.glb",
      "bytes": 1486412,
      "sha256": "sha256:ec3012dee4751fbfebacdd772742836b0e09a3fdc6766d88b0a5db1fc23fc475"
    },
    "licenses": [
      {
        "path": "open-assets/h01-03-continuous-electrode-dryer/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/h01-03-continuous-electrode-dryer/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/h01-03-continuous-electrode-dryer/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/h01-03-continuous-electrode-dryer/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/h01-03-continuous-electrode-dryer/LICENSES/ASSET-NOTICES/h01-03-continuous-electrode-dryer.txt",
        "bytes": 815,
        "sha256": "sha256:ff5c062695a9faa0a003599adb1247c0e30aeb414f456c6a68a68245b709d287"
      }
    ],
    "source": {
      "path": "kit/models/h01-03-continuous-electrode-dryer.mjs",
      "bytes": 535804,
      "sha256": "sha256:dcb8e04cf13084f8b991d1168dc30cb720b4709a1092b4ed618c5f1e64de7bc9"
    },
    "ds2": {
      "path": "dsl/models/h01-03-continuous-electrode-dryer.ds2",
      "bytes": 3651,
      "sha256": "sha256:64414c85ebbf60e139dd2ddfc0314b35e4fdbb65dd2a5e693bdc1483a361c0ba",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 152,
    "triangles": 79744,
    "maxMatrixError": 3.331753276047955e-16,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 13,
    "nodeComparisons": 1976,
    "semanticFrameComparisons": 91,
    "acceptanceCases": 4,
    "acceptanceFrameComparisons": 28,
    "maxMotionMatrixError": 3.331753276047955e-16
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "h01-03-continuous-electrode-dryer",
    "kind": "equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "H 배터리 / H01 전극 제조",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "inlet": {
        "frameId": "web-entry",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -2.9,
            1.25,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "outlet": {
        "frameId": "web-exit",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            2.9,
            1.25,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "supply": {
        "frameId": "hot-air-supply",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            1.3,
            2.4,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "exhaust": {
        "frameId": "nmp-exhaust-outlet",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -1.3,
            2.4,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
