{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "g03-02-reciprocating-hydrogen-compressor",
  "assetTypeId": "g03-02-reciprocating-hydrogen-compressor",
  "label": "왕복동 수소 압축기",
  "category": "G 수소",
  "description": "대유량 수소 파이프라인·정유공정 승압용 수평 대향 밸런스형 무급유 왕복동 수소 압축기. 대형 공용 스키드 베드(기초 볼트 실제 관통홀), 중앙 크랭크케이스와 방폭 동기 모터·플라이휠(관절 flywheel_shaft), 좌·우 가스 퍼지 거리 피스(점검 개구 및 투명 점검창)와 1단·2단 복동 압축 실린더, 상·하부 수평 원통형 흡입/토출 맥동 감쇠기(노즐 중공 보어) 및 전면 DS 브랜드 명판을 갖춘 모델.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -1.600000023841858,
      -5.5109105057610103e-17,
      -0.8999999986588955
    ],
    "max": [
      1.600000023841858,
      1.439999997317791,
      0.9120600000000001
    ]
  },
  "size": [
    3.200000047683716,
    1.439999997317791,
    1.8120599986588957
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 35,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 34,
      "blindSocketHeads": 16,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 13,
    "warnings": [],
    "changedMeshes": 85,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 68024,
      "afterTriangles": 68024,
      "reachedTarget": true,
      "changedMeshes": 0,
      "changes": [],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/g03-02-reciprocating-hydrogen-compressor.mjs",
    "sourceSha256": "sha256:586c359771905786990d9b966d320f8dff7da04b8b03d3b840c85509b096bffa",
    "deliverySha256": "sha256:586c359771905786990d9b966d320f8dff7da04b8b03d3b840c85509b096bffa",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:bb64d823a01c28c472ce7d0a6c9a3cfb17802355eb24e3331ddb643a8ca87c49",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:bb64d823a01c28c472ce7d0a6c9a3cfb17802355eb24e3331ddb643a8ca87c49",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [],
  "parameterValues": {},
  "joints": [
    {
      "id": "flywheel_shaft",
      "label": "구동축 및 플라이휠 회전",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "unit": "rad",
      "min": -6.283185307179586,
      "max": 6.283185307179586,
      "initial": 0
    }
  ],
  "initialState": {
    "flywheel_shaft": 0
  },
  "bindings": [
    {
      "id": "flywheel_shaft",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0.56,
        -0.18
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group",
      "gltfNode": 127
    }
  ],
  "jointBindings": [
    {
      "id": "flywheel_shaft",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0.56,
        -0.18
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group",
      "gltfNode": 127
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base",
      "nodeName": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "h2-suction": {
      "id": "h2-suction",
      "node": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/g03-02-reciprocating-hydrogen-compressor:h2-suction",
      "nodeName": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/g03-02-reciprocating-hydrogen-compressor:h2-suction",
      "gltfNode": 138,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.12,
        1.44,
        0.1,
        1
      ],
      "position": [
        -1.12,
        1.44,
        0.1
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "h2-discharge": {
      "id": "h2-discharge",
      "node": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/g03-02-reciprocating-hydrogen-compressor:h2-discharge",
      "nodeName": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/g03-02-reciprocating-hydrogen-compressor:h2-discharge",
      "gltfNode": 139,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.6,
        0.28,
        0.44,
        1
      ],
      "position": [
        1.6,
        0.28,
        0.44
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "purge-vent": {
      "id": "purge-vent",
      "node": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/g03-02-reciprocating-hydrogen-compressor:purge-vent",
      "nodeName": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/g03-02-reciprocating-hydrogen-compressor:purge-vent",
      "gltfNode": 140,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.4,
        0.1,
        1
      ],
      "position": [
        0,
        1.4,
        0.1
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "flywheel-drive": {
      "id": "flywheel-drive",
      "node": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group/g03-02-reciprocating-hydrogen-compressor:flywheel-drive",
      "nodeName": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group/g03-02-reciprocating-hydrogen-compressor:flywheel-drive",
      "gltfNode": 137,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.56,
        -0.18,
        1
      ],
      "position": [
        0,
        0.56,
        -0.18
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    }
  },
  "ports": {
    "mount": "base",
    "suction": "h2-suction",
    "discharge": "h2-discharge",
    "vent": "purge-vent"
  },
  "nodes": [
    {
      "id": "g03-02-reciprocating-hydrogen-compressor",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 35,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 34,
            "blindSocketHeads": 16,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 13,
          "warnings": [],
          "changedMeshes": 85,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 68024,
            "afterTriangles": 68024,
            "reachedTarget": true,
            "changedMeshes": 0,
            "changes": [],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "g03-02-reciprocating-hydrogen-compressor",
          "coordinate_profile": "lib3d-world/1",
          "label": "왕복동 수소 압축기",
          "category": "G 수소 / G03 압축과 고압 저장",
          "summary": "대유량 수소 파이프라인·정유공정 승압용 수평 대향 밸런스형 무급유 왕복동 수소 압축기. 대형 공용 스키드 베드(기초 볼트 실제 관통홀), 중앙 크랭크케이스와 방폭 동기 모터·플라이휠(관절 flywheel_shaft), 좌·우 가스 퍼지 거리 피스(점검 개구 및 투명 점검창)와 1단·2단 복동 압축 실린더, 상·하부 수평 원통형 흡입/토출 맥동 감쇠기(노즐 중공 보어) 및 전면 DS 브랜드 명판을 갖춘 모델.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [],
          "joints": [
            {
              "id": "flywheel_shaft",
              "label": "구동축 및 플라이휠 회전",
              "kind": "revolute",
              "axis": [
                0,
                0,
                1
              ],
              "unit": "rad",
              "min": -6.283185307179586,
              "max": 6.283185307179586,
              "initial": 0
            }
          ],
          "ports": {
            "mount": "base",
            "suction": "h2-suction",
            "discharge": "h2-discharge",
            "vent": "purge-vent"
          },
          "required_host_features": [
            "revolute"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "패킷 설계 지침(수평 대향 밸런스형 무급유 왕복동 수소 압축기 3.20×1.44×1.80 m, 공용 스키드 베드 기초 볼트 관통홀, 중앙 크랭크케이스 및 방폭 동기 모터·플라이휠 회전 관절 flywheel_shaft, 좌·우 가스 퍼지 거리 피스 점검창 및 1·2단 복동 실린더, 상·하부 맥동 감쇠기 중공 노즐 보어, 전면 DS_Brand_Plate 명판)에 따른 자체 설계 모델."
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S12 US DOE Hydrogen Production Electrolysis",
              "url": "https://www.energy.gov/cmei/fuels/hydrogen-production-electrolysis",
              "basis": "제품군 분류 참고; 열람하지 않음"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S13 Linde Innovating the Hydrogen Value Chain",
              "url": "https://www.linde-engineering.com/path-to-netzero/hydrogen",
              "basis": "제품군 분류 참고; 열람하지 않음"
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {},
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base",
          "h2-suction": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/g03-02-reciprocating-hydrogen-compressor:h2-suction",
          "h2-discharge": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/g03-02-reciprocating-hydrogen-compressor:h2-discharge",
          "purge-vent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/g03-02-reciprocating-hydrogen-compressor:purge-vent",
          "flywheel-drive": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group/g03-02-reciprocating-hydrogen-compressor:flywheel-drive"
        },
        "jointBindings": [
          {
            "id": "flywheel_shaft",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0,
              0.56,
              -0.18
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group"
          }
        ],
        "joints": [
          {
            "id": "flywheel_shaft",
            "label": "구동축 및 플라이휠 회전",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "unit": "rad",
            "min": -6.283185307179586,
            "max": 6.283185307179586,
            "initial": 0,
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 59
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "패킷 설계 지침(수평 대향 밸런스형 무급유 왕복동 수소 압축기 3.20×1.44×1.80 m, 공용 스키드 베드 기초 볼트 관통홀, 중앙 크랭크케이스 및 방폭 동기 모터·플라이휠 회전 관절 flywheel_shaft, 좌·우 가스 퍼지 거리 피스 점검창 및 1·2단 복동 실린더, 상·하부 맥동 감쇠기 중공 노즐 보어, 전면 DS_Brand_Plate 명판)에 따른 자체 설계 모델."
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S12 US DOE Hydrogen Production Electrolysis",
            "url": "https://www.energy.gov/cmei/fuels/hydrogen-production-electrolysis",
            "basis": "제품군 분류 참고; 열람하지 않음"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S13 Linde Innovating the Hydrogen Value Chain",
            "url": "https://www.linde-engineering.com/path-to-netzero/hydrogen",
            "basis": "제품군 분류 참고; 열람하지 않음"
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "flywheel_shaft": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base",
      "parent": "g03-02-reciprocating-hydrogen-compressor",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor:base",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 1
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "common-skid-bed-group",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 2
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/skid-bed-base-plate",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/skid-bed-base-plate",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 3
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/skid-main-beam-front",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.092,
        0.84,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/skid-main-beam-front",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 3.2,
            "height": 0.136,
            "depth": 0.12,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 4
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/skid-main-beam-rear",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.092,
        -0.84,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/skid-main-beam-rear",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 3.2,
            "height": 0.136,
            "depth": 0.12,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 5
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/skid-end-beam-L",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.54,
        0.092,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/skid-end-beam-L",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.136,
            "depth": 1.56,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 6
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/skid-end-beam-R",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.54,
        0.092,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/skid-end-beam-R",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.136,
            "depth": 1.56,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 7
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/skid-cross-girder-L",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.82,
        0.092,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/skid-cross-girder-L",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.136,
            "depth": 1.56,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 8
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/skid-cross-girder-C",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.092,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/skid-cross-girder-C",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.14,
            "height": 0.136,
            "depth": 1.56,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 9
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/skid-cross-girder-R",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.82,
        0.092,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/skid-cross-girder-R",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.136,
            "depth": 1.56,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 10
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/skid-top-deck-plate",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.168,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/skid-top-deck-plate",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 2.96,
            "height": 0.016,
            "depth": 1.56,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 11
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.09,
        0.905,
        1
      ],
      "sourceUserData": {
        "partId": "DS_Brand_Plate",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 12
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate/badge-bezel",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate/badge-bezel",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 13
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate/badge-backing",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate/badge-backing",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 14
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate/badge-rivet-0",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.14845,
        -0.023450000000000002,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate/badge-rivet-0",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 15
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate/badge-rivet-1",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.14845,
        0.023450000000000002,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate/badge-rivet-1",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 16
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate/badge-rivet-2",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.14845,
        -0.023450000000000002,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate/badge-rivet-2",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 17
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate/badge-rivet-3",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.14845,
        0.023450000000000002,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate/badge-rivet-3",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 18
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate/badge-D",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.040600000000000004,
        0,
        0,
        0,
        0,
        0.040600000000000004,
        0,
        0,
        0,
        0,
        0.0036000000000000003,
        0,
        -0.017864,
        0,
        0.00346,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate/badge-D",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 19
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate/badge-S",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.040600000000000004,
        0,
        0,
        0,
        0,
        0.040600000000000004,
        0,
        0,
        0,
        0,
        0.0036000000000000003,
        0,
        0.017864,
        0,
        0.00346,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate/badge-S",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 20
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate/badge-D-back",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.040600000000000004,
        0,
        -4.972066004538255e-18,
        0,
        0,
        0.040600000000000004,
        0,
        0,
        4.408728476930472e-19,
        0,
        -0.0036000000000000003,
        0,
        0.017864,
        0,
        -0.00346,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate/badge-D-back",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 21
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate/badge-S-back",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.040600000000000004,
        0,
        -4.972066004538255e-18,
        0,
        0,
        0.040600000000000004,
        0,
        0,
        4.408728476930472e-19,
        0,
        -0.0036000000000000003,
        0,
        -0.017864,
        0,
        -0.00346,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/common-skid-bed-group/DS_Brand_Plate/badge-S-back",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 22
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "crankcase-motor-group",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 23
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/crankcase-main-frame",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.48,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/crankcase-main-frame",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 24
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/crankcase-top-access-cover",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.81,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/crankcase-top-access-cover",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.58,
            "height": 0.04,
            "depth": 0.42,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 25
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/crankcase-lube-oil-filter",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.22,
        0.44,
        0.48,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/crankcase-lube-oil-filter",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.048,
            "topRadius": 0.048,
            "height": 0.22,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 26
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/crankcase-oil-sight-bezel",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.14,
        0.4,
        0.445,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/crankcase-oil-sight-bezel",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "sensor",
        "BOMqty": 1
      },
      "gltfNode": 27
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/crankcase-oil-sight-lens",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.14,
        0.4,
        0.455,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/crankcase-oil-sight-lens",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "sensor",
        "BOMqty": 1
      },
      "gltfNode": 28
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/sync-motor-pedestal",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.29,
        -0.56,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/sync-motor-pedestal",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.64,
            "height": 0.24,
            "depth": 0.48,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 29
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/sync-motor-stator-frame",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.56,
        -0.56,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/sync-motor-stator-frame",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "motor",
        "BOMqty": 1
      },
      "gltfNode": 30
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/sync-motor-top-cooler-hood",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.94,
        -0.56,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/sync-motor-top-cooler-hood",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.46,
            "height": 0.22,
            "depth": 0.42,
            "radius": 0.005,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 31
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/sync-motor-exd-terminal-box",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.36,
        0.56,
        -0.56,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/sync-motor-exd-terminal-box",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.2,
            "depth": 0.18,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 32
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/flywheel-guard-post-L",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.4,
        0.541,
        -0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/flywheel-guard-post-L",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.04,
            "height": 0.742,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 33
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/flywheel-guard-post-R",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.4,
        0.541,
        -0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/flywheel-guard-post-R",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.04,
            "height": 0.742,
            "depth": 0.12,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 34
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/flywheel-guard-top-hood",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.932,
        -0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/crankcase-motor-group/flywheel-guard-top-hood",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.84,
            "height": 0.04,
            "depth": 0.14,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 35
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "opposed-throws-group",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 36
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "stage1-throw-group",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 37
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/distance-piece-top-plate-1",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.58,
        0.728,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/distance-piece-top-plate-1",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.48,
            "height": 0.024,
            "depth": 0.28,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 38
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/distance-piece-bottom-plate-1",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.58,
        0.392,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/distance-piece-bottom-plate-1",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.48,
            "height": 0.024,
            "depth": 0.28,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 39
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/distance-piece-rear-wall-1",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.58,
        0.56,
        0.049,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/distance-piece-rear-wall-1",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.48,
            "height": 0.36,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 40
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/distance-piece-front-wall-1",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.58,
        0,
        0.311,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/distance-piece-front-wall-1",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 41
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/distance-piece-window-lens-1",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.58,
        0.56,
        0.332,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/distance-piece-window-lens-1",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "sensor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.32,
            "height": 0.22,
            "depth": 0.006,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 42
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/piston-rod-shaft-1",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.58,
        0.56,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/piston-rod-shaft-1",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 43
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/rod-packing-case-1",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.79,
        0.56,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/rod-packing-case-1",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 44
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-cylinder-barrel",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.13,
        0.56,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-cylinder-barrel",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.24,
            "topRadius": 0.24,
            "height": 0.62,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 45
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-cylinder-flange-in",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.838,
        0.56,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-cylinder-flange-in",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 46
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-cylinder-flange-out",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.422,
        0.56,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-cylinder-flange-out",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 47
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-outer-head-cover",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.47,
        0.56,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-outer-head-cover",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.2064,
            "topRadius": 0.2064,
            "height": 0.06,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 48
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-head-unloader-actuator",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.54,
        0.56,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-head-unloader-actuator",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.075,
            "topRadius": 0.075,
            "height": 0.12,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 49
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-cylinder-pedestal",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.13,
        0.28,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-cylinder-pedestal",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.22,
            "depth": 0.28,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 50
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-suction-valve-cap-inboard",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.9699999999999999,
        0.8400000000000001,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-suction-valve-cap-inboard",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.058,
            "topRadius": 0.058,
            "height": 0.12,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 51
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-suction-unloader-inboard",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.9699999999999999,
        0.92,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-suction-unloader-inboard",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.042,
            "topRadius": 0.042,
            "height": 0.07,
            "radialSegments": 36,
            "chamfer": 0.0014700000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 52
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-discharge-valve-neck-inboard",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.9699999999999999,
        0.36,
        0.31,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-discharge-valve-neck-inboard",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.048,
            "topRadius": 0.048,
            "height": 0.18,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 53
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-suction-valve-cap-outboard",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.2899999999999998,
        0.8400000000000001,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-suction-valve-cap-outboard",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.058,
            "topRadius": 0.058,
            "height": 0.12,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 54
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-suction-unloader-outboard",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.2899999999999998,
        0.92,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-suction-unloader-outboard",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.042,
            "topRadius": 0.042,
            "height": 0.07,
            "radialSegments": 36,
            "chamfer": 0.0014700000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 55
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-discharge-valve-neck-outboard",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.2899999999999998,
        0.36,
        0.31,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-discharge-valve-neck-outboard",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.048,
            "topRadius": 0.048,
            "height": 0.18,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 56
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-head-bolt-0",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.49,
        0.7328,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-head-bolt-0",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 57
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-head-bolt-1",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.49,
        0.6821880517890355,
        0.3021880517890354,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-head-bolt-1",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 58
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-head-bolt-2",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.49,
        0.56,
        0.3528,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-head-bolt-2",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 59
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-head-bolt-3",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.49,
        0.4378119482109647,
        0.3021880517890354,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-head-bolt-3",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 60
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-head-bolt-4",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.49,
        0.3872000000000001,
        0.18000000000000002,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-head-bolt-4",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 61
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-head-bolt-5",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.49,
        0.43781194821096464,
        0.05781194821096461,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-head-bolt-5",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 62
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-head-bolt-6",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.49,
        0.56,
        0.007200000000000012,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-head-bolt-6",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 63
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-head-bolt-7",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.49,
        0.6821880517890354,
        0.05781194821096457,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage1-throw-group/stage1-head-bolt-7",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 64
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "stage2-throw-group",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 65
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/distance-piece-top-plate-2",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.58,
        0.728,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/distance-piece-top-plate-2",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.48,
            "height": 0.024,
            "depth": 0.28,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 66
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/distance-piece-bottom-plate-2",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.58,
        0.392,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/distance-piece-bottom-plate-2",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.48,
            "height": 0.024,
            "depth": 0.28,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 67
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/distance-piece-rear-wall-2",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.58,
        0.56,
        0.049,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/distance-piece-rear-wall-2",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.48,
            "height": 0.36,
            "depth": 0.018,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 68
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/distance-piece-front-wall-2",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.58,
        0,
        0.311,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/distance-piece-front-wall-2",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 69
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/distance-piece-window-lens-2",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.58,
        0.56,
        0.332,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/distance-piece-window-lens-2",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "sensor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.32,
            "height": 0.22,
            "depth": 0.006,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 70
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/piston-rod-shaft-2",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.58,
        0.56,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/piston-rod-shaft-2",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 71
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/rod-packing-case-2",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.79,
        0.56,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/rod-packing-case-2",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 72
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-cylinder-barrel",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        1.13,
        0.56,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-cylinder-barrel",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.19,
            "topRadius": 0.19,
            "height": 0.62,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 73
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-cylinder-flange-in",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.838,
        0.56,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-cylinder-flange-in",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 74
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-cylinder-flange-out",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        1.422,
        0.56,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-cylinder-flange-out",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 75
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-outer-head-cover",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        1.47,
        0.56,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-outer-head-cover",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.1634,
            "topRadius": 0.1634,
            "height": 0.06,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 76
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-head-unloader-actuator",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        1.54,
        0.56,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-head-unloader-actuator",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.075,
            "topRadius": 0.075,
            "height": 0.12,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 77
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-cylinder-pedestal",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.13,
        0.28,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-cylinder-pedestal",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.22,
            "depth": 0.28,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 78
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-suction-valve-cap-inboard",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.9699999999999999,
        0.79,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-suction-valve-cap-inboard",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.058,
            "topRadius": 0.058,
            "height": 0.12,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 79
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-suction-unloader-inboard",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.9699999999999999,
        0.87,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-suction-unloader-inboard",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.042,
            "topRadius": 0.042,
            "height": 0.07,
            "radialSegments": 36,
            "chamfer": 0.0014700000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 80
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-discharge-valve-neck-inboard",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.9699999999999999,
        0.36,
        0.31,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-discharge-valve-neck-inboard",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.048,
            "topRadius": 0.048,
            "height": 0.18,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 81
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-suction-valve-cap-outboard",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.2899999999999998,
        0.79,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-suction-valve-cap-outboard",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.058,
            "topRadius": 0.058,
            "height": 0.12,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 82
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-suction-unloader-outboard",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.2899999999999998,
        0.87,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-suction-unloader-outboard",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.042,
            "topRadius": 0.042,
            "height": 0.07,
            "radialSegments": 36,
            "chamfer": 0.0014700000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 83
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-discharge-valve-neck-outboard",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.2899999999999998,
        0.36,
        0.31,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-discharge-valve-neck-outboard",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.048,
            "topRadius": 0.048,
            "height": 0.18,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 84
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-head-bolt-0",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        1.49,
        0.6968000000000001,
        0.18,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-head-bolt-0",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 85
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-head-bolt-1",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        1.49,
        0.6567322076663198,
        0.2767322076663197,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-head-bolt-1",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 86
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-head-bolt-2",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        1.49,
        0.56,
        0.31679999999999997,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-head-bolt-2",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 87
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-head-bolt-3",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        1.49,
        0.4632677923336804,
        0.2767322076663197,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-head-bolt-3",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 88
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-head-bolt-4",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        1.49,
        0.4232,
        0.18000000000000002,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-head-bolt-4",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 89
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-head-bolt-5",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        1.49,
        0.4632677923336803,
        0.0832677923336803,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-head-bolt-5",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 90
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-head-bolt-6",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        1.49,
        0.56,
        0.04319999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-head-bolt-6",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 91
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-head-bolt-7",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        1.49,
        0.6567322076663198,
        0.08326779233368027,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/opposed-throws-group/stage2-throw-group/stage2-head-bolt-7",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 92
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "pulsation-dampeners-group",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 93
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage1-suction-dampener-shell",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.12,
        1.18,
        0.1,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage1-suction-dampener-shell",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.16,
            "topRadius": 0.16,
            "height": 0.86,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 94
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage1-suction-cap-L",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.56,
        1.18,
        0.1,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage1-suction-cap-L",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.16,
            "topRadius": 0.08,
            "height": 0.06,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 95
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage1-suction-cap-R",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.68,
        1.18,
        0.1,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage1-suction-cap-R",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.16,
            "topRadius": 0.08,
            "height": 0.06,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 96
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage1-suction-riser-1",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.97,
        0.94,
        0.14,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage1-suction-riser-1",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.32,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 97
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage1-suction-riser-2",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.29,
        0.94,
        0.14,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage1-suction-riser-2",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.32,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 98
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage2-suction-dampener-shell",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        1.12,
        1.16,
        0.1,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage2-suction-dampener-shell",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.14,
            "topRadius": 0.14,
            "height": 0.82,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 99
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage2-suction-cap-L",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.7,
        1.16,
        0.1,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage2-suction-cap-L",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.14,
            "topRadius": 0.07,
            "height": 0.06,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 100
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage2-suction-cap-R",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        1.54,
        1.16,
        0.1,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage2-suction-cap-R",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.14,
            "topRadius": 0.07,
            "height": 0.06,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 101
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage2-suction-riser-1",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.97,
        0.9,
        0.14,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage2-suction-riser-1",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.046,
            "topRadius": 0.046,
            "height": 0.36,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 102
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage2-suction-riser-2",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.29,
        0.9,
        0.14,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage2-suction-riser-2",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.046,
            "topRadius": 0.046,
            "height": 0.36,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 103
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage1-discharge-dampener-shell",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.12,
        0.28,
        0.44,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage1-discharge-dampener-shell",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.125,
            "topRadius": 0.125,
            "height": 0.78,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 104
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage1-discharge-saddle-1",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.94,
        0.21,
        0.44,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage1-discharge-saddle-1",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.06,
            "height": 0.1,
            "depth": 0.22,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 105
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage1-discharge-saddle-2",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.3,
        0.21,
        0.44,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage1-discharge-saddle-2",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.06,
            "height": 0.1,
            "depth": 0.22,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 106
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage2-discharge-dampener-shell",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        1.12,
        0.28,
        0.44,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage2-discharge-dampener-shell",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.12,
            "topRadius": 0.12,
            "height": 0.84,
            "radialSegments": 36,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 107
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage2-discharge-saddle-1",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.94,
        0.21,
        0.44,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage2-discharge-saddle-1",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.06,
            "height": 0.1,
            "depth": 0.22,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 108
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage2-discharge-saddle-2",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3,
        0.21,
        0.44,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/stage2-discharge-saddle-2",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.06,
            "height": 0.1,
            "depth": 0.22,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 109
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/interstage-crossover-pipe",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/interstage-crossover-pipe",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 110
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/interstage-crossover-pipe-rib-2",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9270499851389488,
        0.025865989215971563,
        -0.3740444835253612,
        0,
        0.025865989215971563,
        0.9908286598790267,
        0.13262547780954928,
        0,
        0.3740444835253612,
        -0.13262547780954928,
        0.9178786450179754,
        0,
        -0.706107576596071,
        0.2755256150794584,
        0.48941366303147976,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/interstage-crossover-pipe-rib-2",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 111
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/interstage-crossover-pipe-rib-4",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9083348076011148,
        0.020938511818020006,
        -0.41771935078841194,
        0,
        0.020938511818020006,
        0.995217145508782,
        0.09541704254585932,
        0,
        0.41771935078841194,
        -0.09541704254585932,
        0.9035519531098969,
        0,
        -0.6850405818803682,
        0.2684192390291863,
        0.5402727032937531,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/interstage-crossover-pipe-rib-4",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 112
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/interstage-crossover-pipe-rib-6",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.7770711922361021,
        -0.03969346294263624,
        -0.6281598452594566,
        0,
        -0.03969346294263624,
        0.9929324028770337,
        -0.11184664642474373,
        0,
        0.6281598452594566,
        0.11184664642474373,
        0.7700035951131358,
        0,
        -0.6566274725752775,
        0.2681560399162133,
        0.587373762755963,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/interstage-crossover-pipe-rib-6",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 113
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/interstage-crossover-pipe-rib-8",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5203544601327604,
        -0.25951981162003646,
        -0.8135605098556863,
        0,
        -0.25951981162003646,
        0.8595826980024852,
        -0.44018979164840827,
        0,
        0.8135605098556863,
        0.44018979164840827,
        0.37993715813524565,
        0,
        -0.5922105570508417,
        0.29375680339906857,
        0.635013203931202,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/interstage-crossover-pipe-rib-8",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 114
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/interstage-crossover-pipe-rib-10",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.4163618859587892,
        -0.41863495828583513,
        -0.8070858390666122,
        0,
        -0.41863495828583513,
        0.6997193567680398,
        -0.5789106955870982,
        0,
        0.8070858390666122,
        0.5789106955870982,
        0.11608124272682896,
        0,
        -0.2991936156491884,
        0.4890937447270958,
        0.7077254407369199,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/interstage-crossover-pipe-rib-10",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 115
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/interstage-crossover-pipe-rib-12",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.3538884586964437,
        -0.48187397166510954,
        -0.801598674046526,
        0,
        -0.48187397166510954,
        0.6406154205203815,
        -0.5978372340555479,
        0,
        0.801598674046526,
        0.5978372340555479,
        -0.0054961207831749626,
        0,
        0.10387844562356455,
        0.7858451216476683,
        0.7349339577016563,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/interstage-crossover-pipe-rib-12",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 116
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/interstage-crossover-pipe-rib-14",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.20206744958772682,
        -0.576926741202259,
        -0.7914065207608876,
        0,
        -0.576926741202259,
        0.58286641578629,
        -0.5722082458635015,
        0,
        0.7914065207608876,
        0.5722082458635015,
        -0.21506613462598323,
        0,
        0.4696474270213796,
        1.056695074413529,
        0.6948563421313344,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/interstage-crossover-pipe-rib-14",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 117
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/interstage-crossover-pipe-rib-16",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.4143592331385584,
        -0.7551828696465281,
        -0.5079421810651886,
        0,
        -0.7551828696465281,
        0.596777711598751,
        -0.27121061249772815,
        0,
        0.5079421810651886,
        0.27121061249772815,
        -0.8175815215398075,
        0,
        0.6443918466914201,
        1.173897748469642,
        0.5887437381709015,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/interstage-crossover-pipe-rib-16",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 118
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/interstage-crossover-pipe-rib-18",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.9794658150354494,
        0.14704446964021484,
        -0.13792984131496563,
        0,
        0.14704446964021484,
        0.9890768125988653,
        0.01024610791945144,
        0,
        0.13792984131496563,
        -0.01024610791945144,
        -0.990389002436584,
        0,
        0.6834083827775213,
        1.1883627519788618,
        0.46762253575250523,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/interstage-crossover-pipe-rib-18",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 119
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/interstage-crossover-pipe-rib-20",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.997368260092127,
        0.07239995183381076,
        -0.0038471723726974023,
        0,
        0.07239995183381076,
        -0.9917443246792967,
        0.1058368623914555,
        0,
        0.0038471723726974023,
        -0.1058368623914555,
        -0.9943760645871698,
        0,
        0.6911124985411428,
        1.1778685337466828,
        0.32142828448060023,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/interstage-crossover-pipe-rib-20",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 120
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/distance-piece-purge-header",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.28,
        0.1,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/distance-piece-purge-header",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.018,
            "topRadius": 0.018,
            "height": 1.16,
            "radialSegments": 36,
            "chamfer": 0.00063
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 121
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/purge-riser-L",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.58,
        1,
        0.1,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/purge-riser-L",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.014,
            "topRadius": 0.014,
            "height": 0.56,
            "radialSegments": 36,
            "chamfer": 0.0004900000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 122
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/purge-riser-R",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.58,
        1,
        0.1,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/purge-riser-R",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.014,
            "topRadius": 0.014,
            "height": 0.56,
            "radialSegments": 36,
            "chamfer": 0.0004900000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 123
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/h2-suction-nozzle",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.12,
        1.32,
        0.1,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/h2-suction-nozzle",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "port",
        "BOMqty": 1
      },
      "gltfNode": 124
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/h2-discharge-nozzle",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.5,
        0.28,
        0.44,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/h2-discharge-nozzle",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "port",
        "BOMqty": 1
      },
      "gltfNode": 125
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/purge-vent-nozzle",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.3,
        0.1,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/pulsation-dampeners-group/purge-vent-nozzle",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "port",
        "BOMqty": 1
      },
      "gltfNode": 126
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.56,
        -0.18,
        1
      ],
      "sourceUserData": {
        "partId": "flywheel-rotor-group",
        "componentRole": "motor",
        "BOMqty": 1
      },
      "gltfNode": 127
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group/main-drive-shaft",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group/main-drive-shaft",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "motor",
        "BOMqty": 1
      },
      "gltfNode": 128
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group/flywheel-outer-rim",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group/flywheel-outer-rim",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "motor",
        "BOMqty": 1
      },
      "gltfNode": 129
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group/flywheel-web-spoke-1",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group/flywheel-web-spoke-1",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.58,
            "height": 0.048,
            "depth": 0.036,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 130
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group/flywheel-web-spoke-2",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5000000000000001,
        0.8660254037844386,
        0,
        0,
        -0.8660254037844386,
        0.5000000000000001,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group/flywheel-web-spoke-2",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.58,
            "height": 0.048,
            "depth": 0.036,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 131
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group/flywheel-web-spoke-3",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.4999999999999998,
        0.8660254037844388,
        0,
        0,
        -0.8660254037844388,
        -0.4999999999999998,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group/flywheel-web-spoke-3",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.58,
            "height": 0.048,
            "depth": 0.036,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 2,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00002,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 132
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group/flywheel-web-spoke-4",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -1,
        1.2246467991473532e-16,
        0,
        0,
        -1.2246467991473532e-16,
        -1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group/flywheel-web-spoke-4",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.58,
            "height": 0.048,
            "depth": 0.036,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 3,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.000030000000000000004,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 133
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group/flywheel-web-spoke-5",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.5000000000000002,
        -0.8660254037844384,
        0,
        0,
        0.8660254037844384,
        -0.5000000000000002,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group/flywheel-web-spoke-5",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.58,
            "height": 0.048,
            "depth": 0.036,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 4,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00004,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 134
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group/flywheel-web-spoke-6",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5000000000000001,
        -0.8660254037844386,
        0,
        0,
        0.8660254037844386,
        0.5000000000000001,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group/flywheel-web-spoke-6",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.58,
            "height": 0.048,
            "depth": 0.036,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 5,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00005,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 135
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group/flywheel-timing-marker",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.25,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group/flywheel-timing-marker",
        "assetId": "g03-02-reciprocating-hydrogen-compressor",
        "componentRole": "motor",
        "BOMqty": 1
      },
      "gltfNode": 136
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group/g03-02-reciprocating-hydrogen-compressor:flywheel-drive",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/flywheel-rotor-group",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor:flywheel-drive",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 137
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/g03-02-reciprocating-hydrogen-compressor:h2-suction",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.12,
        1.44,
        0.1,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor:h2-suction",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 138
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/g03-02-reciprocating-hydrogen-compressor:h2-discharge",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.6,
        0.28,
        0.44,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor:h2-discharge",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 139
    },
    {
      "id": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base/g03-02-reciprocating-hydrogen-compressor:purge-vent",
      "parent": "g03-02-reciprocating-hydrogen-compressor/g03-02-reciprocating-hydrogen-compressor:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.4,
        0.1,
        1
      ],
      "sourceUserData": {
        "partId": "g03-02-reciprocating-hydrogen-compressor:purge-vent",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 140
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "패킷 설계 지침(수평 대향 밸런스형 무급유 왕복동 수소 압축기 3.20×1.44×1.80 m, 공용 스키드 베드 기초 볼트 관통홀, 중앙 크랭크케이스 및 방폭 동기 모터·플라이휠 회전 관절 flywheel_shaft, 좌·우 가스 퍼지 거리 피스 점검창 및 1·2단 복동 실린더, 상·하부 맥동 감쇠기 중공 노즐 보어, 전면 DS_Brand_Plate 명판)에 따른 자체 설계 모델."
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S12 US DOE Hydrogen Production Electrolysis",
      "url": "https://www.energy.gov/cmei/fuels/hydrogen-production-electrolysis",
      "basis": "제품군 분류 참고; 열람하지 않음"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S13 Linde Innovating the Hydrogen Value Chain",
      "url": "https://www.linde-engineering.com/path-to-netzero/hydrogen",
      "basis": "제품군 분류 참고; 열람하지 않음"
    }
  ],
  "rights": {
    "id": "g03-02-reciprocating-hydrogen-compressor",
    "assetTypeId": "g03-02-reciprocating-hydrogen-compressor",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:586c359771905786990d9b966d320f8dff7da04b8b03d3b840c85509b096bffa",
    "modelSource": "kit/models/g03-02-reciprocating-hydrogen-compressor.mjs",
    "dslExampleSource": "dsl/models/g03-02-reciprocating-hydrogen-compressor.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/g03-02-reciprocating-hydrogen-compressor.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/g03-02-reciprocating-hydrogen-compressor.txt",
      "sha256": "sha256:786a7f6b92e67769617a500d9c9d4ad42c4ebe9803fbfbd431474142bdd01e30",
      "bytes": 822
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/g03-02-reciprocating-hydrogen-compressor/model.glb",
      "bytes": 1838096,
      "sha256": "sha256:39d941dc208e2457da86c53dfaa5bd0f9ffbb65f9669b6b3601a7ed772630681"
    },
    "licenses": [
      {
        "path": "open-assets/g03-02-reciprocating-hydrogen-compressor/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/g03-02-reciprocating-hydrogen-compressor/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/g03-02-reciprocating-hydrogen-compressor/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/g03-02-reciprocating-hydrogen-compressor/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/g03-02-reciprocating-hydrogen-compressor/LICENSES/ASSET-NOTICES/g03-02-reciprocating-hydrogen-compressor.txt",
        "bytes": 822,
        "sha256": "sha256:786a7f6b92e67769617a500d9c9d4ad42c4ebe9803fbfbd431474142bdd01e30"
      }
    ],
    "source": {
      "path": "kit/models/g03-02-reciprocating-hydrogen-compressor.mjs",
      "bytes": 25850,
      "sha256": "sha256:586c359771905786990d9b966d320f8dff7da04b8b03d3b840c85509b096bffa"
    },
    "ds2": {
      "path": "dsl/models/g03-02-reciprocating-hydrogen-compressor.ds2",
      "bytes": 2326,
      "sha256": "sha256:c618d84b291392084bce253b9ad57e045d7cff16639836b20352024ecfabd581",
      "scope": "DISPLAY_PREVIEW"
    },
    "motionProfile": {
      "path": "presentation/motion-profiles/models/g03-02-reciprocating-hydrogen-compressor.json",
      "bytes": 9407,
      "sha256": "sha256:91502ff00a713c2bd4ff5629b26a6b3537e01549eb0a2957bdb14ed938473291",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "VERIFIED_SAMPLED_TRAJECTORY",
      "reason": "SOURCE_BOUND_SAMPLED_PATH",
      "automaticPlayback": true,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN",
    "motionProfileSha256": "sha256:91502ff00a713c2bd4ff5629b26a6b3537e01549eb0a2957bdb14ed938473291",
    "compositeDurationMs": 3000
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 141,
    "triangles": 68024,
    "maxMatrixError": 4.440892098500626e-16,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 9,
    "nodeComparisons": 1269,
    "semanticFrameComparisons": 45,
    "acceptanceCases": 4,
    "acceptanceFrameComparisons": 20,
    "maxMotionMatrixError": 4.440892098500626e-16
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "g03-02-reciprocating-hydrogen-compressor",
    "kind": "process-equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "G 수소 / G03 압축과 고압 저장",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "suction": {
        "frameId": "h2-suction",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -1.12,
            1.44,
            0.1
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "discharge": {
        "frameId": "h2-discharge",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            1.6,
            0.28,
            0.44
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "vent": {
        "frameId": "purge-vent",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            1.4,
            0.1
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
