{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "e04-01-stator-coil-winder",
  "assetTypeId": "e04-01-stator-coil-winder",
  "label": "모터 권선기",
  "category": "E 자동차모빌리티",
  "description": "정밀 방진 베이스 캐비닛, 전면 유리창 관통 안전 도어, 중공 치형 슬롯 스테이터 코어 인덱싱 로터리 테이블, 상하 왕복·선회 니들 와인딩 스핀들 헤드, 후방 다축 동선 보빈 크릴·서보 텐셔너 유닛 및 HMI 암을 갖춘 구동모터 고정자 코어 자동 권선기입니다.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -0.5280000004172325,
      -2.9391524213889845e-18,
      -0.7599999964237213
    ],
    "max": [
      0.7399999964237213,
      1.9900000035762786,
      0.49899999922513966
    ]
  },
  "size": [
    1.2679999968409539,
    1.9900000035762786,
    1.258999995648861
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 55,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 12,
      "blindSocketHeads": 14,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 12,
    "warnings": [],
    "changedMeshes": 81,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 97608,
      "afterTriangles": 78792,
      "reachedTarget": true,
      "changedMeshes": 28,
      "changes": [
        {
          "meshes": [
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-1",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-2",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-3",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-4",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-5",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-6",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-7",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-8",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-9",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-10",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-11",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-12",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-13",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-14",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-15",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-16",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-17",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-18"
          ],
          "radiusM": 0.001,
          "dimensionsM": [
            0.012,
            0.138,
            0.01
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/front-safety-door-assembly/safety-door-window-pane"
          ],
          "radiusM": 0.001,
          "dimensionsM": [
            0.436,
            0.616,
            0.006
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-func-key-1",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-func-key-2",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-func-key-3",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-func-key-4"
          ],
          "radiusM": 0.002,
          "dimensionsM": [
            0.024,
            0.016,
            0.008
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/tensioner-dancer-arm-1",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/tensioner-dancer-arm-2",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/tensioner-dancer-arm-3"
          ],
          "radiusM": 0.002,
          "dimensionsM": [
            0.014,
            0.18,
            0.014
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-column-structure/z-guide-rail-left",
            "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-column-structure/z-guide-rail-right"
          ],
          "radiusM": 0.002,
          "dimensionsM": [
            0.032,
            0.88,
            0.028
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        }
      ],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/e04-01-stator-coil-winder.mjs",
    "sourceSha256": "sha256:7a4079ad1ceeb201fa7b266ebf53f1a054fb3d857dd107d73cf02c934d1a615b",
    "deliverySha256": "sha256:6e48a6093d1c3ef62590778bdde2fec0698631a0c87f5ef54e2c0cbb91c4d704",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:0a61c1290e6b762edf465305f6cfabc854a5a7dbdfcb266f2a1cc2659a5b5fa5",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:0a61c1290e6b762edf465305f6cfabc854a5a7dbdfcb266f2a1cc2659a5b5fa5",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [],
  "parameterValues": {},
  "joints": [
    {
      "id": "needle_stroke",
      "label": "니들 헤드 수직 왕복 스트로크",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "unit": "m",
      "min": -0.18,
      "max": 0.18,
      "initial": 0
    },
    {
      "id": "needle_oscillation",
      "label": "니들 스핀들 원주 선회 각도",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "unit": "rad",
      "min": -1.5707963267948966,
      "max": 1.5707963267948966,
      "initial": 0
    },
    {
      "id": "index_angle",
      "label": "고정자 로터리 인덱싱 회전",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "unit": "rad",
      "min": -3.141592653589793,
      "max": 3.141592653589793,
      "initial": 0
    },
    {
      "id": "door",
      "label": "전면 안전 도어 슬라이드 개폐",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "unit": "m",
      "min": 0,
      "max": 0.42,
      "initial": 0
    }
  ],
  "initialState": {
    "needle_stroke": 0,
    "needle_oscillation": 0,
    "index_angle": 0,
    "door": 0
  },
  "bindings": [
    {
      "id": "needle_stroke",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        1.18,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly",
      "gltfNode": 80
    },
    {
      "id": "needle_oscillation",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        -0.16,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly",
      "gltfNode": 84
    },
    {
      "id": "index_angle",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.75,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "gltfNode": 53
    },
    {
      "id": "door",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        1.21,
        0.455
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/front-safety-door-assembly",
      "gltfNode": 49
    }
  ],
  "jointBindings": [
    {
      "id": "needle_stroke",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        1.18,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly",
      "gltfNode": 80
    },
    {
      "id": "needle_oscillation",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        -0.16,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly",
      "gltfNode": 84
    },
    {
      "id": "index_angle",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0.75,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "gltfNode": 53
    },
    {
      "id": "door",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        1.21,
        0.455
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/front-safety-door-assembly",
      "gltfNode": 49
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "nodeName": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "wire-feed-inlet": {
      "id": "wire-feed-inlet",
      "node": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/e04-01-stator-coil-winder:wire-feed-inlet",
      "nodeName": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/e04-01-stator-coil-winder:wire-feed-inlet",
      "gltfNode": 2,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.52,
        -0.62,
        1
      ],
      "position": [
        0,
        1.52,
        -0.62
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "stator-mount": {
      "id": "stator-mount",
      "node": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/e04-01-stator-coil-winder:stator-mount",
      "nodeName": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/e04-01-stator-coil-winder:stator-mount",
      "gltfNode": 54,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.79,
        0,
        1
      ],
      "position": [
        0,
        0.79,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "needle-tip": {
      "id": "needle-tip",
      "node": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly/e04-01-stator-coil-winder:needle-tip",
      "nodeName": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly/e04-01-stator-coil-winder:needle-tip",
      "gltfNode": 85,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.93,
        0,
        1
      ],
      "position": [
        0,
        0.93,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    }
  },
  "ports": {
    "mount": "base",
    "work": "stator-mount",
    "tool": "needle-tip",
    "supply": "wire-feed-inlet"
  },
  "nodes": [
    {
      "id": "e04-01-stator-coil-winder",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "e04-01-stator-coil-winder",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 55,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 12,
            "blindSocketHeads": 14,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 12,
          "warnings": [],
          "changedMeshes": 81,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 97608,
            "afterTriangles": 78792,
            "reachedTarget": true,
            "changedMeshes": 28,
            "changes": [
              {
                "meshes": [
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-1",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-2",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-3",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-4",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-5",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-6",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-7",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-8",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-9",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-10",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-11",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-12",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-13",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-14",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-15",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-16",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-17",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-18"
                ],
                "radiusM": 0.001,
                "dimensionsM": [
                  0.012,
                  0.138,
                  0.01
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/front-safety-door-assembly/safety-door-window-pane"
                ],
                "radiusM": 0.001,
                "dimensionsM": [
                  0.436,
                  0.616,
                  0.006
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-func-key-1",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-func-key-2",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-func-key-3",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-func-key-4"
                ],
                "radiusM": 0.002,
                "dimensionsM": [
                  0.024,
                  0.016,
                  0.008
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/tensioner-dancer-arm-1",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/tensioner-dancer-arm-2",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/tensioner-dancer-arm-3"
                ],
                "radiusM": 0.002,
                "dimensionsM": [
                  0.014,
                  0.18,
                  0.014
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-column-structure/z-guide-rail-left",
                  "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-column-structure/z-guide-rail-right"
                ],
                "radiusM": 0.002,
                "dimensionsM": [
                  0.032,
                  0.88,
                  0.028
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              }
            ],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "e04-01-stator-coil-winder",
          "coordinate_profile": "lib3d-world/1",
          "label": "모터 권선기",
          "category": "E 자동차모빌리티 / E04 엔진과 전기구동 부품",
          "summary": "정밀 방진 베이스 캐비닛, 전면 유리창 관통 안전 도어, 중공 치형 슬롯 스테이터 코어 인덱싱 로터리 테이블, 상하 왕복·선회 니들 와인딩 스핀들 헤드, 후방 다축 동선 보빈 크릴·서보 텐셔너 유닛 및 HMI 암을 갖춘 구동모터 고정자 코어 자동 권선기입니다.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [],
          "joints": [
            {
              "id": "needle_stroke",
              "label": "니들 헤드 수직 왕복 스트로크",
              "kind": "prismatic",
              "axis": [
                0,
                1,
                0
              ],
              "unit": "m",
              "min": -0.18,
              "max": 0.18,
              "initial": 0
            },
            {
              "id": "needle_oscillation",
              "label": "니들 스핀들 원주 선회 각도",
              "kind": "revolute",
              "axis": [
                0,
                1,
                0
              ],
              "unit": "rad",
              "min": -1.5707963267948966,
              "max": 1.5707963267948966,
              "initial": 0
            },
            {
              "id": "index_angle",
              "label": "고정자 로터리 인덱싱 회전",
              "kind": "revolute",
              "axis": [
                0,
                1,
                0
              ],
              "unit": "rad",
              "min": -3.141592653589793,
              "max": 3.141592653589793,
              "initial": 0
            },
            {
              "id": "door",
              "label": "전면 안전 도어 슬라이드 개폐",
              "kind": "prismatic",
              "axis": [
                1,
                0,
                0
              ],
              "unit": "m",
              "min": 0,
              "max": 0.42,
              "initial": 0
            }
          ],
          "ports": {
            "mount": "base",
            "work": "stator-mount",
            "tool": "needle-tip",
            "supply": "wire-feed-inlet"
          },
          "required_host_features": [
            "prismatic",
            "revolute"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "E04-01 설계 지침(방진 베이스 캐비닛, 전면 유리창 관통 안전 도어, 중공 치형 슬롯 고정자 인덱싱 로터리 테이블, 상하 왕복·선회 니들 와인딩 스핀들 헤드, 후방 다축 동선 보빈 크릴·서보 텐셔너 유닛, HMI 암, DS 브랜드 입체 명판)에 따른 자체 설계"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S07 KUKA Body in White",
              "url": "https://www.kuka.com/en-us/products/production-systems/systems/body-in-white-production",
              "basis": "제품군 분류 참고; 열람하지 않음"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S08 Dürr Paint Shop and Application Technology",
              "url": "https://www.durr.com/en/products/paint-shop-application-technology",
              "basis": "제품군 분류 참고; 열람하지 않음"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S02 Daifuku Intralogistics",
              "url": "https://www.daifuku.com/solution/intralogistics/",
              "basis": "제품군 분류 참고; 열람하지 않음"
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {},
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
          "wire-feed-inlet": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/e04-01-stator-coil-winder:wire-feed-inlet",
          "stator-mount": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/e04-01-stator-coil-winder:stator-mount",
          "needle-tip": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly/e04-01-stator-coil-winder:needle-tip"
        },
        "jointBindings": [
          {
            "id": "needle_stroke",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              1.18,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly"
          },
          {
            "id": "needle_oscillation",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              -0.16,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly"
          },
          {
            "id": "index_angle",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0.75,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly"
          },
          {
            "id": "door",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              0,
              1.21,
              0.455
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/front-safety-door-assembly"
          }
        ],
        "joints": [
          {
            "id": "needle_stroke",
            "label": "니들 헤드 수직 왕복 스트로크",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "unit": "m",
            "min": -0.18,
            "max": 0.18,
            "initial": 0,
            "value": 0
          },
          {
            "id": "needle_oscillation",
            "label": "니들 스핀들 원주 선회 각도",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "unit": "rad",
            "min": -1.5707963267948966,
            "max": 1.5707963267948966,
            "initial": 0,
            "value": 0
          },
          {
            "id": "index_angle",
            "label": "고정자 로터리 인덱싱 회전",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "unit": "rad",
            "min": -3.141592653589793,
            "max": 3.141592653589793,
            "initial": 0,
            "value": 0
          },
          {
            "id": "door",
            "label": "전면 안전 도어 슬라이드 개폐",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "unit": "m",
            "min": 0,
            "max": 0.42,
            "initial": 0,
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 57
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "E04-01 설계 지침(방진 베이스 캐비닛, 전면 유리창 관통 안전 도어, 중공 치형 슬롯 고정자 인덱싱 로터리 테이블, 상하 왕복·선회 니들 와인딩 스핀들 헤드, 후방 다축 동선 보빈 크릴·서보 텐셔너 유닛, HMI 암, DS 브랜드 입체 명판)에 따른 자체 설계"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S07 KUKA Body in White",
            "url": "https://www.kuka.com/en-us/products/production-systems/systems/body-in-white-production",
            "basis": "제품군 분류 참고; 열람하지 않음"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S08 Dürr Paint Shop and Application Technology",
            "url": "https://www.durr.com/en/products/paint-shop-application-technology",
            "basis": "제품군 분류 참고; 열람하지 않음"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S02 Daifuku Intralogistics",
            "url": "https://www.daifuku.com/solution/intralogistics/",
            "basis": "제품군 분류 참고; 열람하지 않음"
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "needle_stroke": 0,
          "needle_oscillation": 0,
          "index_angle": 0,
          "door": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "parent": "e04-01-stator-coil-winder",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder:base"
      },
      "gltfNode": 1
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/e04-01-stator-coil-winder:wire-feed-inlet",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.52,
        -0.62,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder:wire-feed-inlet"
      },
      "gltfNode": 2
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "base-cabinet-assembly",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 3
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/anchor-foot-plate-1",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.48,
        0,
        -0.42,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/anchor-foot-plate-1",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 4
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/vibration-damper-pad-1",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.42,
        0.01,
        -0.36,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/vibration-damper-pad-1",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.032,
            "topRadius": 0.032,
            "height": 0.02,
            "radialSegments": 28,
            "chamfer": 0.0008
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 5
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/anchor-foot-plate-2",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.48,
        0,
        -0.42,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/anchor-foot-plate-2",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 6
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/vibration-damper-pad-2",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.42,
        0.01,
        -0.36,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/vibration-damper-pad-2",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.032,
            "topRadius": 0.032,
            "height": 0.02,
            "radialSegments": 28,
            "chamfer": 0.0008
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 7
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/anchor-foot-plate-3",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.48,
        0,
        0.42,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/anchor-foot-plate-3",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 8
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/vibration-damper-pad-3",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.42,
        0.01,
        0.36,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/vibration-damper-pad-3",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.032,
            "topRadius": 0.032,
            "height": 0.02,
            "radialSegments": 28,
            "chamfer": 0.0008
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 9
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/anchor-foot-plate-4",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.48,
        0,
        0.42,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/anchor-foot-plate-4",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 10
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/vibration-damper-pad-4",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.42,
        0.01,
        0.36,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/vibration-damper-pad-4",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.032,
            "topRadius": 0.032,
            "height": 0.02,
            "radialSegments": 28,
            "chamfer": 0.0008
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 11
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/base-cabinet-body",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.36,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/base-cabinet-body",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.96,
            "height": 0.68,
            "depth": 0.84,
            "radius": 0.008,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 12
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/cabinet-front-door-left",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.23,
        0.35,
        0.426,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/cabinet-front-door-left",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.42,
            "height": 0.56,
            "depth": 0.016,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 13
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/cabinet-front-door-right",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.23,
        0.35,
        0.426,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/cabinet-front-door-right",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.42,
            "height": 0.56,
            "depth": 0.016,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 14
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/machine-table-plate",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.7,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/machine-table-plate",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 15
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/table-mount-bolt-0",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.195,
        0.75,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/table-mount-bolt-0",
        "assetId": "e04-01-stator-coil-winder",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 16
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/table-mount-bolt-1",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.13788582233137678,
        0.75,
        0.13788582233137675,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/table-mount-bolt-1",
        "assetId": "e04-01-stator-coil-winder",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 17
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/table-mount-bolt-2",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1940306291686694e-17,
        0.75,
        0.195,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/table-mount-bolt-2",
        "assetId": "e04-01-stator-coil-winder",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 18
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/table-mount-bolt-3",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.13788582233137675,
        0.75,
        0.13788582233137678,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/table-mount-bolt-3",
        "assetId": "e04-01-stator-coil-winder",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 19
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/table-mount-bolt-4",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.195,
        0.75,
        2.3880612583373387e-17,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/table-mount-bolt-4",
        "assetId": "e04-01-stator-coil-winder",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 20
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/table-mount-bolt-5",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.1378858223313768,
        0.75,
        -0.13788582233137675,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/table-mount-bolt-5",
        "assetId": "e04-01-stator-coil-winder",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 21
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/table-mount-bolt-6",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.582091887506008e-17,
        0.75,
        -0.195,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/table-mount-bolt-6",
        "assetId": "e04-01-stator-coil-winder",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 22
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/table-mount-bolt-7",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.13788582233137675,
        0.75,
        -0.1378858223313768,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/base-cabinet-assembly/table-mount-bolt-7",
        "assetId": "e04-01-stator-coil-winder",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.006,
            "height": 0.0054,
            "socketRadius": 0.00258,
            "socketDepth": 0.002268,
            "chamfer": 0.00021000000000000004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 23
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.56,
        0.436,
        1
      ],
      "sourceUserData": {
        "partId": "DS_Brand_Plate",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 24
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate/badge-bezel",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate/badge-bezel",
        "assetId": "e04-01-stator-coil-winder",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 25
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate/badge-backing",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate/badge-backing",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 26
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate/badge-rivet-0",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.097625,
        -0.025124999999999998,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate/badge-rivet-0",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 27
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate/badge-rivet-1",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.097625,
        0.025124999999999998,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate/badge-rivet-1",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 28
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate/badge-rivet-2",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.097625,
        -0.025124999999999998,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate/badge-rivet-2",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 29
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate/badge-rivet-3",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.097625,
        0.025124999999999998,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate/badge-rivet-3",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 30
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate/badge-D",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.0435,
        0,
        0,
        0,
        0,
        0.0435,
        0,
        0,
        0,
        0,
        0.0018000000000000002,
        0,
        -0.019139999999999997,
        0,
        0.00173,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate/badge-D",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 31
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate/badge-S",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.0435,
        0,
        0,
        0,
        0,
        0.0435,
        0,
        0,
        0,
        0,
        0.0018000000000000002,
        0,
        0.019139999999999997,
        0,
        0.00173,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate/badge-S",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 32
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate/badge-D-back",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.0435,
        0,
        -5.327213576290986e-18,
        0,
        0,
        0.0435,
        0,
        0,
        2.204364238465236e-19,
        0,
        -0.0018000000000000002,
        0,
        0.019139999999999997,
        0,
        -0.00173,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate/badge-D-back",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 33
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate/badge-S-back",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.0435,
        0,
        -5.327213576290986e-18,
        0,
        0,
        0.0435,
        0,
        0,
        2.204364238465236e-19,
        0,
        -0.0018000000000000002,
        0,
        -0.019139999999999997,
        0,
        -0.00173,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/DS_Brand_Plate/badge-S-back",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 34
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-column-structure",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.75,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "winding-column-structure",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 35
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-column-structure/main-vertical-column",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-column-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.53,
        -0.28,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-column-structure/main-vertical-column",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.44,
            "height": 1.06,
            "depth": 0.24,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 36
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-column-structure/z-guide-rail-left",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-column-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.14,
        0.54,
        -0.15,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-column-structure/z-guide-rail-left",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.032,
            "height": 0.88,
            "depth": 0.028,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 37
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-column-structure/z-guide-rail-right",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-column-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.14,
        0.54,
        -0.15,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-column-structure/z-guide-rail-right",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.032,
            "height": 0.88,
            "depth": 0.028,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 38
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-column-structure/z-ballscrew-shaft",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-column-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.54,
        -0.135,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-column-structure/z-ballscrew-shaft",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 39
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-column-structure/z-stroke-servo-motor",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-column-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.15,
        -0.135,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-column-structure/z-stroke-servo-motor",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.058,
            "topRadius": 0.058,
            "height": 0.18,
            "radialSegments": 28,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 40
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/safety-enclosure-frame",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.75,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "safety-enclosure-frame",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 41
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/safety-enclosure-frame/enclosure-wall-left",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/safety-enclosure-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.508,
        0.515,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/safety-enclosure-frame/enclosure-wall-left",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 1.03,
            "depth": 0.86,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 42
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/safety-enclosure-frame/enclosure-wall-right",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/safety-enclosure-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.508,
        0.515,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/safety-enclosure-frame/enclosure-wall-right",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 1.03,
            "depth": 0.86,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 43
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/safety-enclosure-frame/enclosure-roof-canopy",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/safety-enclosure-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.01,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/safety-enclosure-frame/enclosure-roof-canopy",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.04,
            "height": 0.04,
            "depth": 0.88,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 44
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/safety-enclosure-frame/status-tower-lamp",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/safety-enclosure-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.42,
        1.125,
        0.36,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/safety-enclosure-frame/status-tower-lamp",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "led",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.026,
            "topRadius": 0.026,
            "height": 0.19,
            "radialSegments": 28,
            "chamfer": 0.00091
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 45
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/safety-enclosure-frame/enclosure-front-wall",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/safety-enclosure-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.416,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/safety-enclosure-frame/enclosure-front-wall",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 2,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00002,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 46
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/safety-enclosure-frame/door-top-guide-track",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/safety-enclosure-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.9,
        0.452,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/safety-enclosure-frame/door-top-guide-track",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.98,
            "height": 0.028,
            "depth": 0.026,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 47
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/safety-enclosure-frame/door-bottom-guide-track",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/safety-enclosure-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.025,
        0.452,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/safety-enclosure-frame/door-bottom-guide-track",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.98,
            "height": 0.024,
            "depth": 0.026,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 48
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/front-safety-door-assembly",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.21,
        0.455,
        1
      ],
      "sourceUserData": {
        "partId": "front-safety-door-assembly",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 49
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/front-safety-door-assembly/safety-door-frame",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/front-safety-door-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.01,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/front-safety-door-assembly/safety-door-frame",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 50
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/front-safety-door-assembly/safety-door-window-pane",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/front-safety-door-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/front-safety-door-assembly/safety-door-window-pane",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.436,
            "height": 0.616,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 51
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/front-safety-door-assembly/safety-door-grip-handle",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/front-safety-door-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.295,
        -0.02,
        0.026,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/front-safety-door-assembly/safety-door-grip-handle",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.02,
            "height": 0.22,
            "depth": 0.036,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 52
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.75,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "stator-index-assembly",
        "componentRole": "actuator",
        "BOMqty": 1
      },
      "gltfNode": 53
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/e04-01-stator-coil-winder:stator-mount",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.04,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder:stator-mount"
      },
      "gltfNode": 54
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/index-rotary-platter",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/index-rotary-platter",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "bearing",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 55
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-core-body",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.04,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-core-body",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 56
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-1",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.08,
        0.11000000000000001,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-1",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.138,
            "depth": 0.01,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 57
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-2",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9396926207859084,
        0,
        -0.34202014332566866,
        0,
        0,
        1,
        0,
        0,
        0.34202014332566866,
        0,
        0.9396926207859084,
        0,
        0.07517540966287267,
        0.11000000000000001,
        -0.0273616114660535,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-2",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.138,
            "depth": 0.01,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 58
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-3",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.7660444431189781,
        0,
        -0.6427876096865394,
        0,
        0,
        1,
        0,
        0,
        0.6427876096865394,
        0,
        0.7660444431189781,
        0,
        0.061283555449518246,
        0.11000000000000001,
        -0.05142300877492314,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-3",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.138,
            "depth": 0.01,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 59
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-4",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5000000000000001,
        0,
        -0.8660254037844386,
        0,
        0,
        1,
        0,
        0,
        0.8660254037844386,
        0,
        0.5000000000000001,
        0,
        0.04000000000000001,
        0.11000000000000001,
        -0.06928203230275509,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-4",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.138,
            "depth": 0.01,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 60
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-5",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.17364817766693053,
        0,
        -0.9848077530122079,
        0,
        0,
        1,
        0,
        0,
        0.9848077530122079,
        0,
        0.17364817766693053,
        0,
        0.013891854213354433,
        0.11000000000000001,
        -0.07878462024097664,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-5",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.138,
            "depth": 0.01,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 61
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-6",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.1736481776669303,
        0,
        -0.9848077530122081,
        0,
        0,
        1,
        0,
        0,
        0.9848077530122081,
        0,
        -0.1736481776669303,
        0,
        -0.013891854213354425,
        0.11000000000000001,
        -0.07878462024097664,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-6",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.138,
            "depth": 0.01,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 62
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-7",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.4999999999999998,
        0,
        -0.8660254037844388,
        0,
        0,
        1,
        0,
        0,
        0.8660254037844388,
        0,
        -0.4999999999999998,
        0,
        -0.03999999999999998,
        0.11000000000000001,
        -0.06928203230275509,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-7",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.138,
            "depth": 0.01,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 63
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-8",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.7660444431189777,
        0,
        -0.6427876096865395,
        0,
        0,
        1,
        0,
        0,
        0.6427876096865395,
        0,
        -0.7660444431189777,
        0,
        -0.06128355544951823,
        0.11000000000000001,
        -0.05142300877492316,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-8",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.138,
            "depth": 0.01,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 64
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-9",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.9396926207859082,
        0,
        -0.3420201433256688,
        0,
        0,
        1,
        0,
        0,
        0.3420201433256688,
        0,
        -0.9396926207859082,
        0,
        -0.07517540966287267,
        0.11000000000000001,
        -0.02736161146605351,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-9",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.138,
            "depth": 0.01,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 65
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-10",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -1,
        0,
        -1.2246467991473532e-16,
        0,
        0,
        1,
        0,
        0,
        1.2246467991473532e-16,
        0,
        -1,
        0,
        -0.08,
        0.11000000000000001,
        -9.797174393178826e-18,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-10",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.138,
            "depth": 0.01,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 66
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-11",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.9396926207859082,
        0,
        0.34202014332566866,
        0,
        0,
        1,
        0,
        0,
        -0.34202014332566866,
        0,
        -0.9396926207859082,
        0,
        -0.07517540966287267,
        0.11000000000000001,
        0.027361611466053492,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-11",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.138,
            "depth": 0.01,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 67
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-12",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.7660444431189781,
        0,
        0.6427876096865389,
        0,
        0,
        1,
        0,
        0,
        -0.6427876096865389,
        0,
        -0.7660444431189781,
        0,
        -0.061283555449518266,
        0.11000000000000001,
        0.05142300877492312,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-12",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.138,
            "depth": 0.01,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 68
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-13",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.5000000000000002,
        0,
        0.8660254037844384,
        0,
        0,
        1,
        0,
        0,
        -0.8660254037844384,
        0,
        -0.5000000000000002,
        0,
        -0.040000000000000036,
        0.11000000000000001,
        0.06928203230275508,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-13",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.138,
            "depth": 0.01,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 69
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-14",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.1736481776669303,
        0,
        0.9848077530122081,
        0,
        0,
        1,
        0,
        0,
        -0.9848077530122081,
        0,
        -0.1736481776669303,
        0,
        -0.013891854213354426,
        0.11000000000000001,
        0.07878462024097664,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-14",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.138,
            "depth": 0.01,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 70
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-15",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.17364817766692997,
        0,
        0.9848077530122081,
        0,
        0,
        1,
        0,
        0,
        -0.9848077530122081,
        0,
        0.17364817766692997,
        0,
        0.013891854213354399,
        0.11000000000000001,
        0.07878462024097665,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-15",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.138,
            "depth": 0.01,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 71
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-16",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.49999999999999933,
        0,
        0.866025403784439,
        0,
        0,
        1,
        0,
        0,
        -0.866025403784439,
        0,
        0.49999999999999933,
        0,
        0.039999999999999945,
        0.11000000000000001,
        0.06928203230275512,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-16",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.138,
            "depth": 0.01,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 72
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-17",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.7660444431189779,
        0,
        0.6427876096865396,
        0,
        0,
        1,
        0,
        0,
        -0.6427876096865396,
        0,
        0.7660444431189779,
        0,
        0.061283555449518225,
        0.11000000000000001,
        0.051423008774923167,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-17",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.138,
            "depth": 0.01,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 73
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-18",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9396926207859084,
        0,
        0.3420201433256686,
        0,
        0,
        1,
        0,
        0,
        -0.3420201433256686,
        0,
        0.9396926207859084,
        0,
        0.07517540966287267,
        0.11000000000000001,
        0.02736161146605349,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-slot-tooth-18",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.138,
            "depth": 0.01,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 74
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/coil-endturn-upper",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.188,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/coil-endturn-upper",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "cable",
        "BOMqty": 1
      },
      "gltfNode": 75
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/coil-endturn-lower",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.032,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/coil-endturn-lower",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "cable",
        "BOMqty": 1
      },
      "gltfNode": 76
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-clamp-jaw-1",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.152,
        0.064,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-clamp-jaw-1",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.032,
            "height": 0.048,
            "depth": 0.028,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 77
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-clamp-jaw-2",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.4999999999999998,
        0,
        -0.8660254037844388,
        0,
        0,
        1,
        0,
        0,
        0.8660254037844388,
        0,
        -0.4999999999999998,
        0,
        -0.07599999999999997,
        0.064,
        -0.13163586137523467,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-clamp-jaw-2",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.032,
            "height": 0.048,
            "depth": 0.028,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 78
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-clamp-jaw-3",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.5000000000000002,
        0,
        0.8660254037844384,
        0,
        0,
        1,
        0,
        0,
        -0.8660254037844384,
        0,
        -0.5000000000000002,
        0,
        -0.07600000000000007,
        0.064,
        0.13163586137523464,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/stator-index-assembly/stator-clamp-jaw-3",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.032,
            "height": 0.048,
            "depth": 0.028,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 79
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.18,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "winding-carriage-assembly",
        "componentRole": "actuator",
        "BOMqty": 1
      },
      "gltfNode": 80
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/carriage-saddle-housing",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.02,
        -0.06,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/carriage-saddle-housing",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.34,
            "height": 0.19,
            "depth": 0.28,
            "radius": 0.005,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 81
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/oscillation-servo-motor",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.185,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/oscillation-servo-motor",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.15,
            "radialSegments": 28,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 82
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/spindle-guide-sleeve",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/spindle-guide-sleeve",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 83
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.16,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "needle-spindle-assembly",
        "componentRole": "actuator",
        "BOMqty": 1
      },
      "gltfNode": 84
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly/e04-01-stator-coil-winder:needle-tip",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.09,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder:needle-tip"
      },
      "gltfNode": 85
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly/needle-hollow-shaft",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly/needle-hollow-shaft",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 86
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly/needle-crosshead-block",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.065,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly/needle-crosshead-block",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.028,
            "depth": 0.044,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 87
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly/wire-nozzle-right",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.062,
        -0.08,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly/wire-nozzle-right",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 88
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly/wire-nozzle-left",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.062,
        -0.08,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly/wire-nozzle-left",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 89
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly/needle-index-fin",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.035,
        0.032,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/needle-spindle-assembly/needle-index-fin",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.014,
            "height": 0.036,
            "depth": 0.064,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 90
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/spindle-flange-bolt-0",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.056,
        -0.06,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/spindle-flange-bolt-0",
        "assetId": "e04-01-stator-coil-winder",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.004,
            "height": 0.0036000000000000003,
            "socketRadius": 0.00172,
            "socketDepth": 0.001512,
            "chamfer": 0.00014000000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 91
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/spindle-flange-bolt-1",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.028000000000000008,
        -0.06,
        0.04849742261192856,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/spindle-flange-bolt-1",
        "assetId": "e04-01-stator-coil-winder",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.004,
            "height": 0.0036000000000000003,
            "socketRadius": 0.00172,
            "socketDepth": 0.001512,
            "chamfer": 0.00014000000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 92
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/spindle-flange-bolt-2",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.027999999999999987,
        -0.06,
        0.04849742261192857,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/spindle-flange-bolt-2",
        "assetId": "e04-01-stator-coil-winder",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.004,
            "height": 0.0036000000000000003,
            "socketRadius": 0.00172,
            "socketDepth": 0.001512,
            "chamfer": 0.00014000000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 93
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/spindle-flange-bolt-3",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.056,
        -0.06,
        6.858022075225178e-18,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/spindle-flange-bolt-3",
        "assetId": "e04-01-stator-coil-winder",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.004,
            "height": 0.0036000000000000003,
            "socketRadius": 0.00172,
            "socketDepth": 0.001512,
            "chamfer": 0.00014000000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 94
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/spindle-flange-bolt-4",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.028000000000000025,
        -0.06,
        -0.048497422611928555,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/spindle-flange-bolt-4",
        "assetId": "e04-01-stator-coil-winder",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.004,
            "height": 0.0036000000000000003,
            "socketRadius": 0.00172,
            "socketDepth": 0.001512,
            "chamfer": 0.00014000000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 95
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/spindle-flange-bolt-5",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.028000000000000008,
        -0.06,
        -0.04849742261192856,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/winding-carriage-assembly/spindle-flange-bolt-5",
        "assetId": "e04-01-stator-coil-winder",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.004,
            "height": 0.0036000000000000003,
            "socketRadius": 0.00172,
            "socketDepth": 0.001512,
            "chamfer": 0.00014000000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 96
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.6,
        1
      ],
      "sourceUserData": {
        "partId": "rear-creel-tensioner-unit",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 97
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/creel-stand-base",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.02,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/creel-stand-base",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.76,
            "height": 0.04,
            "depth": 0.32,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 98
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/creel-upright-left",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.32,
        0.8,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/creel-upright-left",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 1.56,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 99
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/creel-upright-right",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.32,
        0.8,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/creel-upright-right",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 1.56,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 100
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/creel-crossbeam-lower",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.92,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/creel-crossbeam-lower",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.7,
            "height": 0.045,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 101
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/creel-crossbeam-upper",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.52,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/creel-crossbeam-upper",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.7,
            "height": 0.05,
            "depth": 0.06,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 102
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/bobbin-spindle-1",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.22,
        0.92,
        0.095,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/bobbin-spindle-1",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 103
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/copper-wire-spool-1",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.22,
        0.92,
        0.11,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/copper-wire-spool-1",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.078,
            "topRadius": 0.078,
            "height": 0.13,
            "radialSegments": 28,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 104
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/bobbin-flange-rear-1",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.22,
        0.92,
        0.042,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/bobbin-flange-rear-1",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 105
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/bobbin-flange-front-1",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.22,
        0.92,
        0.178,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/bobbin-flange-front-1",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 106
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/servo-tensioner-box-1",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.22,
        1.32,
        0.05,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/servo-tensioner-box-1",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.13,
            "depth": 0.08,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 107
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/tensioner-dancer-arm-1",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.22,
        1.44,
        0.1,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/tensioner-dancer-arm-1",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.014,
            "height": 0.18,
            "depth": 0.014,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 108
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/tensioner-guide-pulley-1",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.22,
        1.52,
        0.105,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/tensioner-guide-pulley-1",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 109
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/bobbin-spindle-2",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.92,
        0.095,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/bobbin-spindle-2",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 110
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/copper-wire-spool-2",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.92,
        0.11,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/copper-wire-spool-2",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.078,
            "topRadius": 0.078,
            "height": 0.13,
            "radialSegments": 28,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 111
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/bobbin-flange-rear-2",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.92,
        0.042,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/bobbin-flange-rear-2",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 112
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/bobbin-flange-front-2",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.92,
        0.178,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/bobbin-flange-front-2",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 113
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/servo-tensioner-box-2",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.32,
        0.05,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/servo-tensioner-box-2",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.13,
            "depth": 0.08,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 114
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/tensioner-dancer-arm-2",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.44,
        0.1,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/tensioner-dancer-arm-2",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.014,
            "height": 0.18,
            "depth": 0.014,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 115
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/tensioner-guide-pulley-2",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.52,
        0.105,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/tensioner-guide-pulley-2",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 116
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/bobbin-spindle-3",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.22,
        0.92,
        0.095,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/bobbin-spindle-3",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 117
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/copper-wire-spool-3",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.22,
        0.92,
        0.11,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/copper-wire-spool-3",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.078,
            "topRadius": 0.078,
            "height": 0.13,
            "radialSegments": 28,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 118
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/bobbin-flange-rear-3",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.22,
        0.92,
        0.042,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/bobbin-flange-rear-3",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 119
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/bobbin-flange-front-3",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.22,
        0.92,
        0.178,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/bobbin-flange-front-3",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 120
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/servo-tensioner-box-3",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.22,
        1.32,
        0.05,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/servo-tensioner-box-3",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.13,
            "depth": 0.08,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 121
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/tensioner-dancer-arm-3",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.22,
        1.44,
        0.1,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/tensioner-dancer-arm-3",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.014,
            "height": 0.18,
            "depth": 0.014,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 122
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/tensioner-guide-pulley-3",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.22,
        1.52,
        0.105,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/rear-creel-tensioner-unit/tensioner-guide-pulley-3",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 123
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-1",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-1",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 124
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-1-rib-2",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9000559747943859,
        -0.18039406226459836,
        -0.3966827756994294,
        0,
        -0.18039406226459836,
        0.6743975677047691,
        -0.7159929489691694,
        0,
        0.3966827756994294,
        0.7159929489691694,
        0.574453542499155,
        0,
        -0.20080705923134592,
        1.55245219389269,
        -0.46138457357636886,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-1-rib-2",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 125
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-1-rib-4",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9018353120528687,
        -0.18461835442863506,
        -0.3906521894762241,
        0,
        -0.18461835442863506,
        0.6527882122918399,
        -0.7346996754462918,
        0,
        0.3906521894762241,
        0.7346996754462918,
        0.5546235243447086,
        0,
        -0.18154174311042884,
        1.5882472026817214,
        -0.4338689051153068,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-1-rib-4",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 126
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-1-rib-6",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.899363580807776,
        -0.17858723971624885,
        -0.3990635880748155,
        0,
        -0.17858723971624885,
        0.6830828993572411,
        -0.708169718652412,
        0,
        0.3990635880748155,
        0.708169718652412,
        0.5824464801650171,
        0,
        -0.16228300656699016,
        1.6237383192074493,
        -0.40625325865764755,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-1-rib-6",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 127
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-1-rib-8",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.8935577748468188,
        -0.1579554633121828,
        -0.4202434706460477,
        0,
        -0.1579554633121828,
        0.7656012136700372,
        -0.6236223642853099,
        0,
        0.4202434706460477,
        0.6236223642853099,
        0.6591589885168558,
        0,
        -0.14310980453077146,
        1.655278836310228,
        -0.37733789824422487,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-1-rib-8",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 128
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-1-rib-10",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.8888910254690222,
        -0.11127850442909898,
        -0.44439828902984435,
        0,
        -0.11127850442909898,
        0.8885517070043286,
        -0.44507635123843264,
        0,
        0.44439828902984435,
        0.44507635123843264,
        0.7774427324733508,
        0,
        -0.12410109193151428,
        1.6792220468304129,
        -0.3459230879158727,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-1-rib-10",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 129
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-1-rib-12",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.8965241127118332,
        -0.03292532737712947,
        -0.44176966639117377,
        0,
        -0.03292532737712947,
        0.9895233835504871,
        -0.14056811951471943,
        0,
        0.44176966639117377,
        0.14056811951471943,
        0.8860474962623203,
        0,
        -0.10510790999510085,
        1.6920131569053614,
        -0.31035924257909986,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-1-rib-12",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 130
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-1-rib-14",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9145647818649337,
        0.02730673774821681,
        -0.40351654469909454,
        0,
        0.02730673774821681,
        0.9912722417906037,
        0.12897164311964487,
        0,
        0.40351654469909454,
        -0.12897164311964487,
        0.9058370236555374,
        0,
        -0.0857205108172348,
        1.6917077098718796,
        -0.26904647668857884,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-1-rib-14",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 131
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-1-rib-16",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9282609375634613,
        0.054572638905282495,
        -0.36790414359818974,
        0,
        0.054572638905282495,
        0.9584860351399088,
        0.2798684468186635,
        0,
        0.36790414359818974,
        -0.2798684468186635,
        0.8867469727033701,
        0,
        -0.06655750308311463,
        1.6810382502662882,
        -0.22432403790147673,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-1-rib-16",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 132
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-1-rib-18",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9350099337038726,
        0.06456117002997776,
        -0.34869510922787533,
        0,
        0.06456117002997776,
        0.9358648957727241,
        0.34639392631030436,
        0,
        0.34869510922787533,
        -0.34639392631030436,
        0.8708748294765968,
        0,
        -0.04753202558870962,
        1.6640166539229522,
        -0.17751179959711508,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-1-rib-18",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 133
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-1-rib-20",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9355112112473356,
        0.06522366565401279,
        -0.34722420288510497,
        0,
        0.06522366565401279,
        0.9340330832129222,
        0.3511809688784628,
        0,
        0.34722420288510497,
        -0.3511809688784628,
        0.8695442944602578,
        0,
        -0.02855721712998919,
        1.6446547966762366,
        -0.12992963515481581,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-1-rib-20",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 134
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-2",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-2",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 135
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-2-rib-2",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.6269563210722318,
        -0.7790544085412602,
        0,
        0,
        0.7790544085412602,
        0.6269563210722318,
        0,
        0,
        1.5524317899893512,
        -0.4613534726210335,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-2-rib-2",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 136
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-2-rib-4",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.6040081574616625,
        -0.7969781337776887,
        0,
        0,
        0.7969781337776887,
        0.6040081574616625,
        0,
        0,
        1.5881827693027566,
        -0.43377069157214243,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-2-rib-4",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 137
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-2-rib-6",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.6362383637920793,
        -0.7714925433464523,
        0,
        0,
        0.7714925433464523,
        0.6362383637920793,
        0,
        0,
        1.623632004132157,
        -0.40609120631142637,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-2-rib-6",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 138
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-2-rib-8",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.7261629393465414,
        -0.6875226436413503,
        0,
        0,
        0.6875226436413503,
        0.7261629393465414,
        0,
        0,
        1.6551585606694934,
        -0.37715456629698474,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-2-rib-8",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 139
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-2-rib-10",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.8662467778154999,
        -0.49961637275440046,
        0,
        0,
        0.49961637275440046,
        0.8662467778154999,
        0,
        0,
        1.6791415051067067,
        -0.34580032098691715,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-2-rib-10",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 140
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-2-rib-12",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.9869204765410762,
        -0.16120785645847163,
        0,
        0,
        0.16120785645847163,
        0.9869204765410762,
        0,
        0,
        1.6920679210159948,
        -0.31033377271826135,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-2-rib-12",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 141
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-2-rib-14",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.99023644219084,
        0.13939795033366614,
        0,
        0,
        -0.13939795033366614,
        0.99023644219084,
        0,
        0,
        1.6918910112339176,
        -0.2689612263279211,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-2-rib-14",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 142
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-2-rib-16",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.9534579421181862,
        0.30152603969102487,
        0,
        0,
        -0.30152603969102487,
        0.9534579421181862,
        0,
        0,
        1.6812378450827294,
        -0.2242312097309827,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-2-rib-16",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 143
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-2-rib-18",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.9286159266272294,
        0.3710423975966251,
        0,
        0,
        -0.3710423975966251,
        0.9286159266272294,
        0,
        0,
        1.6641637476085382,
        -0.1774433888138712,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-2-rib-18",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 144
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-2-rib-20",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.9266217240076635,
        0.37599492097243215,
        0,
        0,
        -0.37599492097243215,
        0.9266217240076635,
        0,
        0,
        1.6447240438574509,
        -0.12989742946301178,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-2-rib-20",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 145
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-3",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-3",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 146
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-3-rib-2",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9000559747943859,
        0.18039406226459836,
        0.3966827756994294,
        0,
        0.18039406226459836,
        0.6743975677047691,
        -0.7159929489691694,
        0,
        -0.3966827756994294,
        0.7159929489691694,
        0.574453542499155,
        0,
        0.20080705923134592,
        1.55245219389269,
        -0.46138457357636886,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-3-rib-2",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 147
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-3-rib-4",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9018353120528687,
        0.18461835442863506,
        0.3906521894762241,
        0,
        0.18461835442863506,
        0.6527882122918399,
        -0.7346996754462918,
        0,
        -0.3906521894762241,
        0.7346996754462918,
        0.5546235243447086,
        0,
        0.18154174311042884,
        1.5882472026817214,
        -0.4338689051153068,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-3-rib-4",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 148
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-3-rib-6",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.899363580807776,
        0.17858723971624885,
        0.3990635880748155,
        0,
        0.17858723971624885,
        0.6830828993572411,
        -0.708169718652412,
        0,
        -0.3990635880748155,
        0.708169718652412,
        0.5824464801650171,
        0,
        0.16228300656699016,
        1.6237383192074493,
        -0.40625325865764755,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-3-rib-6",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 149
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-3-rib-8",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.8935577748468188,
        0.1579554633121828,
        0.4202434706460477,
        0,
        0.1579554633121828,
        0.7656012136700372,
        -0.6236223642853099,
        0,
        -0.4202434706460477,
        0.6236223642853099,
        0.6591589885168558,
        0,
        0.14310980453077146,
        1.655278836310228,
        -0.37733789824422487,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-3-rib-8",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 150
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-3-rib-10",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.8888910254690222,
        0.11127850442909898,
        0.44439828902984435,
        0,
        0.11127850442909898,
        0.8885517070043286,
        -0.44507635123843264,
        0,
        -0.44439828902984435,
        0.44507635123843264,
        0.7774427324733508,
        0,
        0.12410109193151428,
        1.6792220468304129,
        -0.3459230879158727,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-3-rib-10",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 151
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-3-rib-12",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.8965241127118332,
        0.03292532737712947,
        0.44176966639117377,
        0,
        0.03292532737712947,
        0.9895233835504871,
        -0.14056811951471943,
        0,
        -0.44176966639117377,
        0.14056811951471943,
        0.8860474962623203,
        0,
        0.10510790999510085,
        1.6920131569053614,
        -0.31035924257909986,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-3-rib-12",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 152
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-3-rib-14",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9145647818649337,
        -0.02730673774821681,
        0.40351654469909454,
        0,
        -0.02730673774821681,
        0.9912722417906037,
        0.12897164311964487,
        0,
        -0.40351654469909454,
        -0.12897164311964487,
        0.9058370236555374,
        0,
        0.0857205108172348,
        1.6917077098718796,
        -0.26904647668857884,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-3-rib-14",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 153
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-3-rib-16",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9282609375634613,
        -0.054572638905282495,
        0.36790414359818974,
        0,
        -0.054572638905282495,
        0.9584860351399088,
        0.2798684468186635,
        0,
        -0.36790414359818974,
        -0.2798684468186635,
        0.8867469727033701,
        0,
        0.06655750308311463,
        1.6810382502662882,
        -0.22432403790147673,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-3-rib-16",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 154
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-3-rib-18",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9350099337038726,
        -0.06456117002997776,
        0.34869510922787533,
        0,
        -0.06456117002997776,
        0.9358648957727241,
        0.34639392631030436,
        0,
        -0.34869510922787533,
        -0.34639392631030436,
        0.8708748294765968,
        0,
        0.04753202558870962,
        1.6640166539229522,
        -0.17751179959711508,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-3-rib-18",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 155
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-3-rib-20",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9355112112473356,
        -0.06522366565401279,
        0.34722420288510497,
        0,
        -0.06522366565401279,
        0.9340330832129222,
        0.3511809688784628,
        0,
        -0.34722420288510497,
        -0.3511809688784628,
        0.8695442944602578,
        0,
        0.02855721712998919,
        1.6446547966762366,
        -0.12992963515481581,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/copper-wire-line-3-rib-20",
        "assetId": "e04-01-stator-coil-winder"
      },
      "gltfNode": 156
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.58,
        1.32,
        0.42,
        1
      ],
      "sourceUserData": {
        "partId": "hmi-pendant-assembly",
        "componentRole": "sensor",
        "BOMqty": 1
      },
      "gltfNode": 157
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-support-boom",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.06,
        0.24,
        -0.12,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-support-boom",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.045,
            "depth": 0.045,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 158
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-vertical-drop-tube",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.13,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-vertical-drop-tube",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.022,
            "topRadius": 0.022,
            "height": 0.26,
            "radialSegments": 28,
            "chamfer": 0.0007700000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 159
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-panel-enclosure",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-panel-enclosure",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.32,
            "height": 0.26,
            "depth": 0.07,
            "radius": 0.005,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 160
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-touch-screen",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.025,
        0.036,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-touch-screen",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "sensor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.25,
            "height": 0.16,
            "depth": 0.006,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 161
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-estop-button",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.105,
        -0.088,
        0.042,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-estop-button",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.016,
            "topRadius": 0.016,
            "height": 0.018,
            "radialSegments": 28,
            "chamfer": 0.0005600000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 162
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-func-key-1",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09,
        -0.088,
        0.038,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-func-key-1",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.016,
            "depth": 0.008,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 163
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-func-key-2",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.047999999999999994,
        -0.088,
        0.038,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-func-key-2",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.016,
            "depth": 0.008,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 164
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-func-key-3",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.0059999999999999915,
        -0.088,
        0.038,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-func-key-3",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.016,
            "depth": 0.008,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 165
    },
    {
      "id": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-func-key-4",
      "parent": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.036000000000000004,
        -0.088,
        0.038,
        1
      ],
      "sourceUserData": {
        "partId": "e04-01-stator-coil-winder/e04-01-stator-coil-winder:base/hmi-pendant-assembly/hmi-func-key-4",
        "assetId": "e04-01-stator-coil-winder",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.016,
            "depth": 0.008,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 166
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "E04-01 설계 지침(방진 베이스 캐비닛, 전면 유리창 관통 안전 도어, 중공 치형 슬롯 고정자 인덱싱 로터리 테이블, 상하 왕복·선회 니들 와인딩 스핀들 헤드, 후방 다축 동선 보빈 크릴·서보 텐셔너 유닛, HMI 암, DS 브랜드 입체 명판)에 따른 자체 설계"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S07 KUKA Body in White",
      "url": "https://www.kuka.com/en-us/products/production-systems/systems/body-in-white-production",
      "basis": "제품군 분류 참고; 열람하지 않음"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S08 Dürr Paint Shop and Application Technology",
      "url": "https://www.durr.com/en/products/paint-shop-application-technology",
      "basis": "제품군 분류 참고; 열람하지 않음"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S02 Daifuku Intralogistics",
      "url": "https://www.daifuku.com/solution/intralogistics/",
      "basis": "제품군 분류 참고; 열람하지 않음"
    }
  ],
  "rights": {
    "id": "e04-01-stator-coil-winder",
    "assetTypeId": "e04-01-stator-coil-winder",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:7a4079ad1ceeb201fa7b266ebf53f1a054fb3d857dd107d73cf02c934d1a615b",
    "modelSource": "kit/models/e04-01-stator-coil-winder.mjs",
    "dslExampleSource": "dsl/models/e04-01-stator-coil-winder.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/e04-01-stator-coil-winder.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/e04-01-stator-coil-winder.txt",
      "sha256": "sha256:917c66ed7f8143f9242ad1a83e194a3ced8c42a1c24a1d248d33cd8f6f9ba041",
      "bytes": 807
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/e04-01-stator-coil-winder/model.glb",
      "bytes": 1096304,
      "sha256": "sha256:acbc147dfb3de832a66189e77ceada19326ca4f9f08a36cd5288f433148c34d7"
    },
    "licenses": [
      {
        "path": "open-assets/e04-01-stator-coil-winder/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/e04-01-stator-coil-winder/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/e04-01-stator-coil-winder/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/e04-01-stator-coil-winder/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/e04-01-stator-coil-winder/LICENSES/ASSET-NOTICES/e04-01-stator-coil-winder.txt",
        "bytes": 807,
        "sha256": "sha256:917c66ed7f8143f9242ad1a83e194a3ced8c42a1c24a1d248d33cd8f6f9ba041"
      }
    ],
    "source": {
      "path": "kit/models/e04-01-stator-coil-winder.mjs",
      "bytes": 24036,
      "sha256": "sha256:6e48a6093d1c3ef62590778bdde2fec0698631a0c87f5ef54e2c0cbb91c4d704"
    },
    "ds2": {
      "path": "dsl/models/e04-01-stator-coil-winder.ds2",
      "bytes": 4480,
      "sha256": "sha256:a23b68ca5393cdec1c683fe98ec6f6eae53b3b26cea8765a9ca6046582b445e9",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 167,
    "triangles": 78792,
    "maxMatrixError": 3.3306690738754696e-16,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 15,
    "nodeComparisons": 2505,
    "semanticFrameComparisons": 60,
    "acceptanceCases": 4,
    "acceptanceFrameComparisons": 16,
    "maxMotionMatrixError": 3.3306690738754696e-16
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "e04-01-stator-coil-winder",
    "kind": "equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "E 자동차모빌리티 / E04 엔진과 전기구동 부품",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "work": {
        "frameId": "stator-mount",
        "portClass": "process",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0.79,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "tool": {
        "frameId": "needle-tip",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0.93,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "supply": {
        "frameId": "wire-feed-inlet",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            1.52,
            -0.62
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
