{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "e03-01-ed-coating-dip-tank",
  "assetTypeId": "e03-01-ed-coating-dip-tank",
  "label": "전처리 전착 침지조",
  "category": "E 자동차모빌리티",
  "description": "입·출구 경사 케이싱을 갖춘 7.6 m 장방형 스테인리스 전착 침지 탱크와 외측 보강 H빔 리브, 좌·우 측면 위어 오버플로 거터(수위 게이트 관절 weir_gate)와 격막 전극(anode cell) 튜브 뱅크 16본, 플랜지 중공 관통홀을 갖춘 순환 펌프(관절 circulation_pump)·에덕터 노즐 배관 매니폴드, 상부 점검 보도·난간 및 외벽 중앙 DS 브랜드 입체 명판을 갖춘 전처리 전착 침지조 표시 모델.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -3.8399999141693115,
      -6.735557192910056e-18,
      -2.1179999992251397
    ],
    "max": [
      3.8399999141693115,
      3.439999999552966,
      1.839999990463257
    ]
  },
  "size": [
    7.679999828338623,
    3.439999999552966,
    3.9579999896883966
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 66,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 64,
      "blindSocketHeads": 0,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 3,
    "warnings": [],
    "changedMeshes": 130,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 109484,
      "afterTriangles": 79916,
      "reachedTarget": true,
      "changedMeshes": 44,
      "changes": [
        {
          "meshes": [
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F1",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R1",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F2",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R2",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F3",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R3",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F4",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R4",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F5",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R5",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F6",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R6",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F7",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R7",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F8",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R8"
          ],
          "radiusM": 0.002,
          "dimensionsM": [
            0.024,
            0.14,
            0.04
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group/weir-blade-front",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group/weir-blade-rear"
          ],
          "radiusM": 0.002,
          "dimensionsM": [
            4.68,
            0.22,
            0.02
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-toe-board"
          ],
          "radiusM": 0.002,
          "dimensionsM": [
            7.2,
            0.12,
            0.025
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F1",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R1",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F2",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R2",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F3",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R3",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F4",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R4",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F5",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R5",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F6",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R6",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F7",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R7"
          ],
          "radiusM": 0.003,
          "dimensionsM": [
            0.12,
            2.14,
            0.16
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-1",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-2",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-3",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-4",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-5",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-6",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-7"
          ],
          "radiusM": 0.003,
          "dimensionsM": [
            0.08,
            0.24,
            0.72
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-busbar-front",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-busbar-rear"
          ],
          "radiusM": 0.003,
          "dimensionsM": [
            4.6,
            0.045,
            0.045
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/weir-gutter-trough-front",
            "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/weir-gutter-trough-rear"
          ],
          "radiusM": 0.003,
          "dimensionsM": [
            4.8,
            0.06,
            0.24
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        }
      ],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/e03-01-ed-coating-dip-tank.mjs",
    "sourceSha256": "sha256:315039273b331338ce11d377f6e352e3f79474c38d58b0329867ddec0af31d01",
    "deliverySha256": "sha256:315039273b331338ce11d377f6e352e3f79474c38d58b0329867ddec0af31d01",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:99e1ed0260d83ff496674413b46bdab3cb424cc93649bc068cc0c53acdf34e68",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:99e1ed0260d83ff496674413b46bdab3cb424cc93649bc068cc0c53acdf34e68",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [],
  "parameterValues": {},
  "joints": [
    {
      "id": "weir_gate",
      "label": "위어 오버플로 수위 게이트 조절",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "unit": "m",
      "min": -0.08,
      "max": 0.08,
      "initial": 0
    },
    {
      "id": "circulation_pump",
      "label": "순환 펌프 임펠러 축 회전",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "unit": "rad",
      "min": -6.283185307179586,
      "max": 6.283185307179586,
      "initial": 0
    }
  ],
  "initialState": {
    "weir_gate": 0,
    "circulation_pump": 0
  },
  "bindings": [
    {
      "id": "weir_gate",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group",
      "gltfNode": 119
    },
    {
      "id": "circulation_pump",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        -1.45,
        0.72,
        1.56
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/pump-impeller-group",
      "gltfNode": 149
    }
  ],
  "jointBindings": [
    {
      "id": "weir_gate",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group",
      "gltfNode": 119
    },
    {
      "id": "circulation_pump",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        -1.45,
        0.72,
        1.56
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/pump-impeller-group",
      "gltfNode": 149
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base",
      "nodeName": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "weir-crest": {
      "id": "weir-crest",
      "node": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group/e03-01-ed-coating-dip-tank:weir-crest",
      "nodeName": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group/e03-01-ed-coating-dip-tank:weir-crest",
      "gltfNode": 124,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.29,
        1.29,
        1
      ],
      "position": [
        0,
        2.29,
        1.29
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "body-entry": {
      "id": "body-entry",
      "node": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/e03-01-ed-coating-dip-tank:body-entry",
      "nodeName": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/e03-01-ed-coating-dip-tank:body-entry",
      "gltfNode": 182,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.8,
        2.1,
        0,
        1
      ],
      "position": [
        -3.8,
        2.1,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "body-exit": {
      "id": "body-exit",
      "node": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/e03-01-ed-coating-dip-tank:body-exit",
      "nodeName": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/e03-01-ed-coating-dip-tank:body-exit",
      "gltfNode": 183,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.8,
        2.1,
        0,
        1
      ],
      "position": [
        3.8,
        2.1,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "supply-port": {
      "id": "supply-port",
      "node": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/e03-01-ed-coating-dip-tank:supply-port",
      "nodeName": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/e03-01-ed-coating-dip-tank:supply-port",
      "gltfNode": 184,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.55,
        0.72,
        1.56,
        1
      ],
      "position": [
        -2.55,
        0.72,
        1.56
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "return-port": {
      "id": "return-port",
      "node": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/e03-01-ed-coating-dip-tank:return-port",
      "nodeName": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/e03-01-ed-coating-dip-tank:return-port",
      "gltfNode": 185,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.55,
        1.45,
        1.56,
        1
      ],
      "position": [
        2.55,
        1.45,
        1.56
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "drain-port": {
      "id": "drain-port",
      "node": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/e03-01-ed-coating-dip-tank:drain-port",
      "nodeName": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/e03-01-ed-coating-dip-tank:drain-port",
      "gltfNode": 186,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.42,
        1.58,
        1
      ],
      "position": [
        0,
        0.42,
        1.58
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    }
  },
  "ports": {
    "mount": "base",
    "inlet": "body-entry",
    "outlet": "body-exit",
    "supply": "supply-port",
    "return": "return-port",
    "drain": "drain-port"
  },
  "nodes": [
    {
      "id": "e03-01-ed-coating-dip-tank",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "e03-01-ed-coating-dip-tank",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 66,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 64,
            "blindSocketHeads": 0,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 3,
          "warnings": [],
          "changedMeshes": 130,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 109484,
            "afterTriangles": 79916,
            "reachedTarget": true,
            "changedMeshes": 44,
            "changes": [
              {
                "meshes": [
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F1",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R1",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F2",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R2",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F3",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R3",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F4",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R4",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F5",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R5",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F6",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R6",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F7",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R7",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F8",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R8"
                ],
                "radiusM": 0.002,
                "dimensionsM": [
                  0.024,
                  0.14,
                  0.04
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group/weir-blade-front",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group/weir-blade-rear"
                ],
                "radiusM": 0.002,
                "dimensionsM": [
                  4.68,
                  0.22,
                  0.02
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-toe-board"
                ],
                "radiusM": 0.002,
                "dimensionsM": [
                  7.2,
                  0.12,
                  0.025
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F1",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R1",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F2",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R2",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F3",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R3",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F4",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R4",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F5",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R5",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F6",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R6",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F7",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R7"
                ],
                "radiusM": 0.003,
                "dimensionsM": [
                  0.12,
                  2.14,
                  0.16
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-1",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-2",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-3",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-4",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-5",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-6",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-7"
                ],
                "radiusM": 0.003,
                "dimensionsM": [
                  0.08,
                  0.24,
                  0.72
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-busbar-front",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-busbar-rear"
                ],
                "radiusM": 0.003,
                "dimensionsM": [
                  4.6,
                  0.045,
                  0.045
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/weir-gutter-trough-front",
                  "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/weir-gutter-trough-rear"
                ],
                "radiusM": 0.003,
                "dimensionsM": [
                  4.8,
                  0.06,
                  0.24
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              }
            ],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "e03-01-ed-coating-dip-tank",
          "coordinate_profile": "lib3d-world/1",
          "label": "전처리 전착 침지조",
          "category": "E 자동차모빌리티 / E03 전처리와 도장",
          "summary": "입·출구 경사 케이싱을 갖춘 7.6 m 장방형 스테인리스 전착 침지 탱크와 외측 보강 H빔 리브, 좌·우 측면 위어 오버플로 거터(수위 게이트 관절 weir_gate)와 격막 전극(anode cell) 튜브 뱅크 16본, 플랜지 중공 관통홀을 갖춘 순환 펌프(관절 circulation_pump)·에덕터 노즐 배관 매니폴드, 상부 점검 보도·난간 및 외벽 중앙 DS 브랜드 입체 명판을 갖춘 전처리 전착 침지조 표시 모델.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [],
          "joints": [
            {
              "id": "weir_gate",
              "label": "위어 오버플로 수위 게이트 조절",
              "kind": "prismatic",
              "axis": [
                0,
                1,
                0
              ],
              "unit": "m",
              "min": -0.08,
              "max": 0.08,
              "initial": 0
            },
            {
              "id": "circulation_pump",
              "label": "순환 펌프 임펠러 축 회전",
              "kind": "revolute",
              "axis": [
                1,
                0,
                0
              ],
              "unit": "rad",
              "min": -6.283185307179586,
              "max": 6.283185307179586,
              "initial": 0
            }
          ],
          "ports": {
            "mount": "base",
            "inlet": "body-entry",
            "outlet": "body-exit",
            "supply": "supply-port",
            "return": "return-port",
            "drain": "drain-port"
          },
          "required_host_features": [
            "prismatic",
            "revolute"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "전처리 전착 침지조(ED Coating Dip Tank) 설계 지침(입·출구 경사 케이싱 장방형 스테인리스 침지 탱크, 외측 보강 H빔 리브, 좌·우 측면 위어 오버플로 거터 및 격막 전극 튜브 뱅크, 측벽 순환 펌프·에덕터 노즐 배관 매니폴드 및 플랜지 중공 관통홀, 상부 점검 보도·난간, 외벽 중앙 DS_Brand_Plate 명판)에 따른 자체 설계"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S07 KUKA Body in White",
              "url": "https://www.kuka.com/en-us/products/production-systems/systems/body-in-white-production",
              "basis": "제품군 분류 참고; 열람하지 않음"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S08 Dürr Paint Shop and Application Technology",
              "url": "https://www.durr.com/en/products/paint-shop-application-technology",
              "basis": "제품군 분류 참고; 열람하지 않음"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S02 Daifuku Intralogistics",
              "url": "https://www.daifuku.com/solution/intralogistics/",
              "basis": "제품군 분류 참고; 열람하지 않음"
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {},
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base",
          "weir-crest": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group/e03-01-ed-coating-dip-tank:weir-crest",
          "body-entry": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/e03-01-ed-coating-dip-tank:body-entry",
          "body-exit": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/e03-01-ed-coating-dip-tank:body-exit",
          "supply-port": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/e03-01-ed-coating-dip-tank:supply-port",
          "return-port": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/e03-01-ed-coating-dip-tank:return-port",
          "drain-port": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/e03-01-ed-coating-dip-tank:drain-port"
        },
        "jointBindings": [
          {
            "id": "weir_gate",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group"
          },
          {
            "id": "circulation_pump",
            "kind": "revolute",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              -1.45,
              0.72,
              1.56
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/pump-impeller-group"
          }
        ],
        "joints": [
          {
            "id": "weir_gate",
            "label": "위어 오버플로 수위 게이트 조절",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "unit": "m",
            "min": -0.08,
            "max": 0.08,
            "initial": 0,
            "value": 0
          },
          {
            "id": "circulation_pump",
            "label": "순환 펌프 임펠러 축 회전",
            "kind": "revolute",
            "axis": [
              1,
              0,
              0
            ],
            "unit": "rad",
            "min": -6.283185307179586,
            "max": 6.283185307179586,
            "initial": 0,
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 53
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "전처리 전착 침지조(ED Coating Dip Tank) 설계 지침(입·출구 경사 케이싱 장방형 스테인리스 침지 탱크, 외측 보강 H빔 리브, 좌·우 측면 위어 오버플로 거터 및 격막 전극 튜브 뱅크, 측벽 순환 펌프·에덕터 노즐 배관 매니폴드 및 플랜지 중공 관통홀, 상부 점검 보도·난간, 외벽 중앙 DS_Brand_Plate 명판)에 따른 자체 설계"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S07 KUKA Body in White",
            "url": "https://www.kuka.com/en-us/products/production-systems/systems/body-in-white-production",
            "basis": "제품군 분류 참고; 열람하지 않음"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S08 Dürr Paint Shop and Application Technology",
            "url": "https://www.durr.com/en/products/paint-shop-application-technology",
            "basis": "제품군 분류 참고; 열람하지 않음"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S02 Daifuku Intralogistics",
            "url": "https://www.daifuku.com/solution/intralogistics/",
            "basis": "제품군 분류 참고; 열람하지 않음"
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "weir_gate": 0,
          "circulation_pump": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base",
      "parent": "e03-01-ed-coating-dip-tank",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank:base",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 1
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "ed-dip-tank-structure",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 2
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/base-sill-beam-front",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.12,
        1.28,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/base-sill-beam-front",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 7.6,
            "height": 0.2,
            "depth": 0.16,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 3
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/base-sill-beam-rear",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.12,
        -1.28,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/base-sill-beam-rear",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 7.6,
            "height": 0.2,
            "depth": 0.16,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 4
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/base-sill-beam-center",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.12,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/base-sill-beam-center",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 7.6,
            "height": 0.2,
            "depth": 0.16,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 5
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/base-cross-girder-1",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.3,
        0.12,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/base-cross-girder-1",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.2,
            "depth": 2.76,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 6
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-F1",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.3,
        0,
        1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-F1",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 7
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-R1",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.3,
        0,
        -1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-R1",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 8
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/base-cross-girder-2",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.2,
        0.12,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/base-cross-girder-2",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.2,
            "depth": 2.76,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 9
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-F2",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.2,
        0,
        1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-F2",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 10
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-R2",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.2,
        0,
        -1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-R2",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 11
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/base-cross-girder-3",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.1,
        0.12,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/base-cross-girder-3",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.2,
            "depth": 2.76,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 12
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-F3",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.1,
        0,
        1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-F3",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 13
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-R3",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.1,
        0,
        -1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-R3",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 14
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/base-cross-girder-4",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.12,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/base-cross-girder-4",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.2,
            "depth": 2.76,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 15
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-F4",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-F4",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 16
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-R4",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-R4",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 17
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/base-cross-girder-5",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1,
        0.12,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/base-cross-girder-5",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.2,
            "depth": 2.76,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 18
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-F5",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1,
        0,
        1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-F5",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 19
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-R5",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1,
        0,
        -1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-R5",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 20
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/base-cross-girder-6",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.2,
        0.12,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/base-cross-girder-6",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.2,
            "depth": 2.76,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 21
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-F6",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.2,
        0,
        1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-F6",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 22
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-R6",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.2,
        0,
        -1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-R6",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 23
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/base-cross-girder-7",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.3,
        0.12,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/base-cross-girder-7",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.2,
            "depth": 2.76,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 24
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-F7",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.3,
        0,
        1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-F7",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 25
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-R7",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.3,
        0,
        -1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/anchor-pad-R7",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 26
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-bottom-plate",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.27,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-bottom-plate",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 7.48,
            "height": 0.06,
            "depth": 2.4,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 27
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-side-wall-front",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.32,
        1.23,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-side-wall-front",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 7.6,
            "height": 2.16,
            "depth": 0.06,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 28
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-side-wall-rear",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.32,
        -1.23,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-side-wall-rear",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 7.6,
            "height": 2.16,
            "depth": 0.06,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 29
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-entry-slope-casing",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-entry-slope-casing",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 30
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-exit-slope-casing",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-exit-slope-casing",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 31
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-entry-portal-arch",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.8,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-entry-portal-arch",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 32
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-exit-portal-arch",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.68,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-exit-portal-arch",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 33
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-rim-girder-front",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.38,
        1.36,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-rim-girder-front",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 7.68,
            "height": 0.1,
            "depth": 0.28,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 34
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-rim-girder-rear",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.38,
        -1.36,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-rim-girder-rear",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 7.68,
            "height": 0.1,
            "depth": 0.28,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 35
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F1",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.3,
        1.31,
        1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F1",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 2.14,
            "depth": 0.16,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 36
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R1",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.3,
        1.31,
        -1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R1",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 2.14,
            "depth": 0.16,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 37
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F2",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.2,
        1.31,
        1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F2",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 2.14,
            "depth": 0.16,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 38
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R2",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.2,
        1.31,
        -1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R2",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 2.14,
            "depth": 0.16,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 39
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F3",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.1,
        1.31,
        1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F3",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 2.14,
            "depth": 0.16,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 40
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R3",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.1,
        1.31,
        -1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R3",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 2.14,
            "depth": 0.16,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 41
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F4",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.31,
        1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F4",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 2.14,
            "depth": 0.16,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 42
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R4",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.31,
        -1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R4",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 2.14,
            "depth": 0.16,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 43
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F5",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1,
        1.31,
        1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F5",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 2.14,
            "depth": 0.16,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 44
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R5",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1,
        1.31,
        -1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R5",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 2.14,
            "depth": 0.16,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 45
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F6",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.2,
        1.31,
        1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F6",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 2.14,
            "depth": 0.16,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 46
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R6",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.2,
        1.31,
        -1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R6",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 2.14,
            "depth": 0.16,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 47
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F7",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.3,
        1.31,
        1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-F7",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 2.14,
            "depth": 0.16,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 48
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R7",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.3,
        1.31,
        -1.34,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/tank-hbeam-rib-R7",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 2.14,
            "depth": 0.16,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 49
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/front-brand-backing-plate",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.48,
        1.42,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/front-brand-backing-plate",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.76,
            "height": 0.36,
            "depth": 0.02,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 50
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.48,
        1.435,
        1
      ],
      "sourceUserData": {
        "partId": "DS_Brand_Plate",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 51
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate/badge-bezel",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate/badge-bezel",
        "assetId": "e03-01-ed-coating-dip-tank",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 52
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate/badge-backing",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate/badge-backing",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 53
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate/badge-rivet-0",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.2103,
        -0.06029999999999999,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate/badge-rivet-0",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 54
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate/badge-rivet-1",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.2103,
        0.06029999999999999,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate/badge-rivet-1",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 55
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate/badge-rivet-2",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.2103,
        -0.06029999999999999,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate/badge-rivet-2",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 56
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate/badge-rivet-3",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.2103,
        0.06029999999999999,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate/badge-rivet-3",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 57
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate/badge-D",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.10439999999999999,
        0,
        0,
        0,
        0,
        0.10439999999999999,
        0,
        0,
        0,
        0,
        0.0054,
        0,
        -0.045936,
        0,
        0.00519,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate/badge-D",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 58
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate/badge-S",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.10439999999999999,
        0,
        0,
        0,
        0,
        0.10439999999999999,
        0,
        0,
        0,
        0,
        0.0054,
        0,
        0.045936,
        0,
        0.00519,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate/badge-S",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 59
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate/badge-D-back",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.10439999999999999,
        0,
        -1.2785312583098366e-17,
        0,
        0,
        0.10439999999999999,
        0,
        0,
        6.6130927153957075e-19,
        0,
        -0.0054,
        0,
        0.045936,
        0,
        -0.00519,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate/badge-D-back",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 60
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate/badge-S-back",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.10439999999999999,
        0,
        -1.2785312583098366e-17,
        0,
        0,
        0.10439999999999999,
        0,
        0,
        6.6130927153957075e-19,
        0,
        -0.0054,
        0,
        -0.045936,
        0,
        -0.00519,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/ed-dip-tank-structure/DS_Brand_Plate/badge-S-back",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 61
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "weir-and-anode-group",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 62
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/weir-gutter-trough-front",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.88,
        1.38,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/weir-gutter-trough-front",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 4.8,
            "height": 0.06,
            "depth": 0.24,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 63
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/weir-gutter-wall-front",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.1,
        1.48,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/weir-gutter-wall-front",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 4.8,
            "height": 0.44,
            "depth": 0.04,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 64
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/weir-gutter-trough-rear",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.88,
        -1.38,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/weir-gutter-trough-rear",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 4.8,
            "height": 0.06,
            "depth": 0.24,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 65
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/weir-gutter-wall-rear",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.1,
        -1.48,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/weir-gutter-wall-rear",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 4.8,
            "height": 0.44,
            "depth": 0.04,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 66
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-busbar-front",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.45,
        1.12,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-busbar-front",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 4.6,
            "height": 0.045,
            "depth": 0.045,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 67
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-busbar-rear",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.45,
        -1.12,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-busbar-rear",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 4.6,
            "height": 0.045,
            "depth": 0.045,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 68
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anolyte-header-front",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.32,
        1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anolyte-header-front",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "port",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.028,
            "topRadius": 0.028,
            "height": 4.6,
            "radialSegments": 48,
            "chamfer": 0.0009800000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 69
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anolyte-header-rear",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.32,
        -1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anolyte-header-rear",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "port",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.028,
            "topRadius": 0.028,
            "height": 4.6,
            "radialSegments": 48,
            "chamfer": 0.0009800000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 70
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-F1",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.1,
        1.38,
        1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-F1",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.042,
            "topRadius": 0.042,
            "height": 1.72,
            "radialSegments": 48,
            "chamfer": 0.0014700000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 71
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-F1",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.1,
        2.28,
        1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-F1",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.08,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 72
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F1",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.1,
        2.38,
        1.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F1",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.14,
            "depth": 0.04,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 73
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-R1",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.1,
        1.38,
        -1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-R1",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.042,
            "topRadius": 0.042,
            "height": 1.72,
            "radialSegments": 48,
            "chamfer": 0.0014700000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 74
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-R1",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.1,
        2.28,
        -1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-R1",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.08,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 75
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R1",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.1,
        2.38,
        -1.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R1",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.14,
            "depth": 0.04,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 76
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-F2",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.5,
        1.38,
        1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-F2",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.042,
            "topRadius": 0.042,
            "height": 1.72,
            "radialSegments": 48,
            "chamfer": 0.0014700000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 77
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-F2",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.5,
        2.28,
        1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-F2",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.08,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 78
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F2",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.5,
        2.38,
        1.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F2",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.14,
            "depth": 0.04,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 79
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-R2",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.5,
        1.38,
        -1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-R2",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.042,
            "topRadius": 0.042,
            "height": 1.72,
            "radialSegments": 48,
            "chamfer": 0.0014700000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 80
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-R2",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.5,
        2.28,
        -1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-R2",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.08,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 81
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R2",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.5,
        2.38,
        -1.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R2",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.14,
            "depth": 0.04,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 82
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-F3",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.9000000000000001,
        1.38,
        1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-F3",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.042,
            "topRadius": 0.042,
            "height": 1.72,
            "radialSegments": 48,
            "chamfer": 0.0014700000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 83
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-F3",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.9000000000000001,
        2.28,
        1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-F3",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.08,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 84
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F3",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.9000000000000001,
        2.38,
        1.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F3",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.14,
            "depth": 0.04,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 85
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-R3",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.9000000000000001,
        1.38,
        -1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-R3",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.042,
            "topRadius": 0.042,
            "height": 1.72,
            "radialSegments": 48,
            "chamfer": 0.0014700000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 86
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-R3",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.9000000000000001,
        2.28,
        -1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-R3",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.08,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 87
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R3",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.9000000000000001,
        2.38,
        -1.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R3",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.14,
            "depth": 0.04,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 88
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-F4",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.30000000000000027,
        1.38,
        1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-F4",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.042,
            "topRadius": 0.042,
            "height": 1.72,
            "radialSegments": 48,
            "chamfer": 0.0014700000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 89
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-F4",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.30000000000000027,
        2.28,
        1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-F4",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.08,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 90
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F4",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.30000000000000027,
        2.38,
        1.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F4",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.14,
            "depth": 0.04,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 91
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-R4",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.30000000000000027,
        1.38,
        -1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-R4",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.042,
            "topRadius": 0.042,
            "height": 1.72,
            "radialSegments": 48,
            "chamfer": 0.0014700000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 92
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-R4",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.30000000000000027,
        2.28,
        -1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-R4",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.08,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 93
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R4",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.30000000000000027,
        2.38,
        -1.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R4",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.14,
            "depth": 0.04,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 94
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-F5",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.2999999999999998,
        1.38,
        1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-F5",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.042,
            "topRadius": 0.042,
            "height": 1.72,
            "radialSegments": 48,
            "chamfer": 0.0014700000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 95
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-F5",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.2999999999999998,
        2.28,
        1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-F5",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.08,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 96
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F5",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.2999999999999998,
        2.38,
        1.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F5",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.14,
            "depth": 0.04,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 97
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-R5",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.2999999999999998,
        1.38,
        -1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-R5",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.042,
            "topRadius": 0.042,
            "height": 1.72,
            "radialSegments": 48,
            "chamfer": 0.0014700000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 98
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-R5",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.2999999999999998,
        2.28,
        -1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-R5",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.08,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 99
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R5",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.2999999999999998,
        2.38,
        -1.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R5",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.14,
            "depth": 0.04,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 100
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-F6",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.8999999999999999,
        1.38,
        1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-F6",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.042,
            "topRadius": 0.042,
            "height": 1.72,
            "radialSegments": 48,
            "chamfer": 0.0014700000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 101
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-F6",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.8999999999999999,
        2.28,
        1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-F6",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.08,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 102
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F6",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.8999999999999999,
        2.38,
        1.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F6",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.14,
            "depth": 0.04,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 103
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-R6",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.8999999999999999,
        1.38,
        -1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-R6",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.042,
            "topRadius": 0.042,
            "height": 1.72,
            "radialSegments": 48,
            "chamfer": 0.0014700000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 104
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-R6",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.8999999999999999,
        2.28,
        -1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-R6",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.08,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 105
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R6",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.8999999999999999,
        2.38,
        -1.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R6",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.14,
            "depth": 0.04,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 106
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-F7",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.4999999999999996,
        1.38,
        1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-F7",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.042,
            "topRadius": 0.042,
            "height": 1.72,
            "radialSegments": 48,
            "chamfer": 0.0014700000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 107
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-F7",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.4999999999999996,
        2.28,
        1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-F7",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.08,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 108
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F7",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.4999999999999996,
        2.38,
        1.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F7",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.14,
            "depth": 0.04,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 109
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-R7",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.4999999999999996,
        1.38,
        -1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-R7",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.042,
            "topRadius": 0.042,
            "height": 1.72,
            "radialSegments": 48,
            "chamfer": 0.0014700000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 110
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-R7",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.4999999999999996,
        2.28,
        -1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-R7",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.08,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 111
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R7",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.4999999999999996,
        2.38,
        -1.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R7",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.14,
            "depth": 0.04,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 112
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-F8",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.1,
        1.38,
        1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-F8",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.042,
            "topRadius": 0.042,
            "height": 1.72,
            "radialSegments": 48,
            "chamfer": 0.0014700000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 113
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-F8",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.1,
        2.28,
        1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-F8",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.08,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 114
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F8",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.1,
        2.38,
        1.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-F8",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.14,
            "depth": 0.04,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 115
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-R8",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.1,
        1.38,
        -1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-tube-R8",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.042,
            "topRadius": 0.042,
            "height": 1.72,
            "radialSegments": 48,
            "chamfer": 0.0014700000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 116
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-R8",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.1,
        2.28,
        -1.08,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-cell-cap-R8",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.08,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 117
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R8",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.1,
        2.38,
        -1.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-and-anode-group/anode-copper-drop-R8",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "cable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.14,
            "depth": 0.04,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 118
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "weir-level-gate-group",
        "componentRole": "actuator",
        "BOMqty": 1
      },
      "gltfNode": 119
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group/weir-blade-front",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.18,
        1.29,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group/weir-blade-front",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 4.68,
            "height": 0.22,
            "depth": 0.02,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 120
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group/weir-blade-rear",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.18,
        -1.29,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group/weir-blade-rear",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 4.68,
            "height": 0.22,
            "depth": 0.02,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 121
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group/weir-adjust-rod-front",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.34,
        1.29,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group/weir-adjust-rod-front",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 122
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group/weir-adjust-rod-rear",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.34,
        -1.29,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group/weir-adjust-rod-rear",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 123
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group/e03-01-ed-coating-dip-tank:weir-crest",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/weir-level-gate-group",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.29,
        1.29,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank:weir-crest"
      },
      "gltfNode": 124
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "circulation-manifold-group",
        "componentRole": "port",
        "BOMqty": 1
      },
      "gltfNode": 125
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/pump-skid-base",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.52,
        0.08,
        1.58,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/pump-skid-base",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.92,
            "height": 0.16,
            "depth": 0.52,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 126
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/ed-pump-motor",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.72,
        0.72,
        1.56,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/ed-pump-motor",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "motor",
        "BOMqty": 1,
        "functionalInterface": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.16,
            "topRadius": 0.16,
            "height": 0.42,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "explicitCylinderBore": {
          "schema": "lib3d-explicit-cylinder-bore/1",
          "id": "ed-pump-motor-finite-blind-seat",
          "baselineSourceSha256": "sha256:cf0c015dad534a0a31093b76910ba51f949dd79fcea860b3d7b1077cef9fbda0",
          "scope": "ORIGINAL_DESIGN_DISPLAY_REPAIR_CANDIDATE",
          "kind": "circular-blind-seat",
          "minimumBoreInradiusM": 0.036501
        }
      },
      "gltfNode": 127
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/ed-pump-motor-support",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.72,
        0.37,
        1.56,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/ed-pump-motor-support",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.32,
            "height": 0.42,
            "depth": 0.28,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 128
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/ed-pump-volute-casing",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.25,
        0.72,
        1.56,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/ed-pump-volute-casing",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "functionalInterface": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.21,
            "topRadius": 0.21,
            "height": 0.18,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "explicitCylinderBore": {
          "schema": "lib3d-explicit-cylinder-bore/1",
          "id": "ed-pump-volute-casing-finite-blind-seat",
          "baselineSourceSha256": "sha256:cf0c015dad534a0a31093b76910ba51f949dd79fcea860b3d7b1077cef9fbda0",
          "scope": "ORIGINAL_DESIGN_DISPLAY_REPAIR_CANDIDATE",
          "kind": "circular-blind-seat",
          "minimumBoreInradiusM": 0.036501
        }
      },
      "gltfNode": 129
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-supply-header",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.72,
        1.56,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-supply-header",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "port",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.055,
            "topRadius": 0.055,
            "height": 5.04,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 130
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/overflow-return-header",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.72,
        1.45,
        1.56,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/overflow-return-header",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "port",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.055,
            "topRadius": 0.055,
            "height": 3.6,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 131
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/overflow-downcomer-pipe",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.8,
        1.68,
        1.46,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/overflow-downcomer-pipe",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "port",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.045,
            "topRadius": 0.045,
            "height": 0.46,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 132
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-branch-pipe-1",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.75,
        0.72,
        1.38,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-branch-pipe-1",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "port",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.026,
            "topRadius": 0.026,
            "height": 0.34,
            "radialSegments": 48,
            "chamfer": 0.00091
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 133
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-nozzle-1",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.75,
        0.48,
        0.96,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-nozzle-1",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "nozzle",
        "BOMqty": 1
      },
      "gltfNode": 134
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-branch-pipe-2",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.05,
        0.72,
        1.38,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-branch-pipe-2",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "port",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.026,
            "topRadius": 0.026,
            "height": 0.34,
            "radialSegments": 48,
            "chamfer": 0.00091
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 135
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-nozzle-2",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.05,
        0.48,
        0.96,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-nozzle-2",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "nozzle",
        "BOMqty": 1
      },
      "gltfNode": 136
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-branch-pipe-3",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.3500000000000001,
        0.72,
        1.38,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-branch-pipe-3",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "port",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.026,
            "topRadius": 0.026,
            "height": 0.34,
            "radialSegments": 48,
            "chamfer": 0.00091
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 137
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-nozzle-3",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.3500000000000001,
        0.48,
        0.96,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-nozzle-3",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "nozzle",
        "BOMqty": 1
      },
      "gltfNode": 138
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-branch-pipe-4",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.34999999999999964,
        0.72,
        1.38,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-branch-pipe-4",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "port",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.026,
            "topRadius": 0.026,
            "height": 0.34,
            "radialSegments": 48,
            "chamfer": 0.00091
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 139
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-nozzle-4",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.34999999999999964,
        0.48,
        0.96,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-nozzle-4",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "nozzle",
        "BOMqty": 1
      },
      "gltfNode": 140
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-branch-pipe-5",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.0499999999999998,
        0.72,
        1.38,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-branch-pipe-5",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "port",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.026,
            "topRadius": 0.026,
            "height": 0.34,
            "radialSegments": 48,
            "chamfer": 0.00091
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 141
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-nozzle-5",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.0499999999999998,
        0.48,
        0.96,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-nozzle-5",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "nozzle",
        "BOMqty": 1
      },
      "gltfNode": 142
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-branch-pipe-6",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.75,
        0.72,
        1.38,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-branch-pipe-6",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "port",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.026,
            "topRadius": 0.026,
            "height": 0.34,
            "radialSegments": 48,
            "chamfer": 0.00091
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 143
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-nozzle-6",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.75,
        0.48,
        0.96,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/eductor-nozzle-6",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "nozzle",
        "BOMqty": 1
      },
      "gltfNode": 144
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/supply-manifold-flange",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.55,
        0.72,
        1.56,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/supply-manifold-flange",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "port",
        "BOMqty": 1
      },
      "gltfNode": 145
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/overflow-return-flange",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.526,
        1.45,
        1.56,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/overflow-return-flange",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "port",
        "BOMqty": 1
      },
      "gltfNode": 146
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/tank-drain-stub",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.42,
        1.41,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/tank-drain-stub",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "port",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 147
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/tank-drain-flange",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.42,
        1.568,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/circulation-manifold-group/tank-drain-flange",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "port",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 148
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/pump-impeller-group",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.45,
        0.72,
        1.56,
        1
      ],
      "sourceUserData": {
        "partId": "pump-impeller-group",
        "componentRole": "actuator",
        "BOMqty": 1
      },
      "gltfNode": 149
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/pump-impeller-group/pump-drive-shaft",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/pump-impeller-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/pump-impeller-group/pump-drive-shaft",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 150
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/pump-impeller-group/pump-coupling-spider-1",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/pump-impeller-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/pump-impeller-group/pump-coupling-spider-1",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.08,
            "height": 0.14,
            "depth": 0.035,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 151
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/pump-impeller-group/pump-coupling-spider-2",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/pump-impeller-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/pump-impeller-group/pump-coupling-spider-2",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.08,
            "height": 0.035,
            "depth": 0.14,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 152
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "upper-walkway-group",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 153
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-grating-deck",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.34,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-grating-deck",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 154
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-toe-board",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.44,
        -2.04,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-toe-board",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 7.2,
            "height": 0.12,
            "depth": 0.025,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 155
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-handrail-top",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        3.42,
        -2.04,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-handrail-top",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.02,
            "topRadius": 0.02,
            "height": 7.2,
            "radialSegments": 48,
            "chamfer": 0.0007000000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 156
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-handrail-mid",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.92,
        -2.04,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-handrail-mid",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.016,
            "topRadius": 0.016,
            "height": 7.2,
            "radialSegments": 48,
            "chamfer": 0.0005600000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 157
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-1",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.3,
        2.22,
        -1.7,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-1",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.08,
            "height": 0.24,
            "depth": 0.72,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 158
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-post-1",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.3,
        2.9,
        -2.04,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-post-1",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.02,
            "topRadius": 0.02,
            "height": 1.06,
            "radialSegments": 48,
            "chamfer": 0.0007000000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 159
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-2",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.1999999999999997,
        2.22,
        -1.7,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-2",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.08,
            "height": 0.24,
            "depth": 0.72,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 160
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-post-2",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.1999999999999997,
        2.9,
        -2.04,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-post-2",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.02,
            "topRadius": 0.02,
            "height": 1.06,
            "radialSegments": 48,
            "chamfer": 0.0007000000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 161
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-3",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.0999999999999996,
        2.22,
        -1.7,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-3",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.08,
            "height": 0.24,
            "depth": 0.72,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 162
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-post-3",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.0999999999999996,
        2.9,
        -2.04,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-post-3",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.02,
            "topRadius": 0.02,
            "height": 1.06,
            "radialSegments": 48,
            "chamfer": 0.0007000000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 163
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-4",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        4.440892098500626e-16,
        2.22,
        -1.7,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-4",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.08,
            "height": 0.24,
            "depth": 0.72,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 164
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-post-4",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        4.440892098500626e-16,
        2.9,
        -2.04,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-post-4",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.02,
            "topRadius": 0.02,
            "height": 1.06,
            "radialSegments": 48,
            "chamfer": 0.0007000000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 165
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-5",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1000000000000005,
        2.22,
        -1.7,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-5",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.08,
            "height": 0.24,
            "depth": 0.72,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 166
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-post-5",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1000000000000005,
        2.9,
        -2.04,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-post-5",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.02,
            "topRadius": 0.02,
            "height": 1.06,
            "radialSegments": 48,
            "chamfer": 0.0007000000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 167
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-6",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.2,
        2.22,
        -1.7,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-6",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.08,
            "height": 0.24,
            "depth": 0.72,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 168
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-post-6",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.2,
        2.9,
        -2.04,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-post-6",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.02,
            "topRadius": 0.02,
            "height": 1.06,
            "radialSegments": 48,
            "chamfer": 0.0007000000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 169
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-7",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.3000000000000007,
        2.22,
        -1.7,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-cantilever-7",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.08,
            "height": 0.24,
            "depth": 0.72,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 170
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-post-7",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.3000000000000007,
        2.9,
        -2.04,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/walkway-post-7",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.02,
            "topRadius": 0.02,
            "height": 1.06,
            "radialSegments": 48,
            "chamfer": 0.0007000000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 171
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/ladder-rail-left",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.68,
        1.4,
        -2.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/ladder-rail-left",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.018,
            "topRadius": 0.018,
            "height": 2.8,
            "radialSegments": 48,
            "chamfer": 0.00063
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 172
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/ladder-rail-right",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.28,
        1.4,
        -2.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/ladder-rail-right",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.018,
            "topRadius": 0.018,
            "height": 2.8,
            "radialSegments": 48,
            "chamfer": 0.00063
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 173
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/ladder-rung-1",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.48,
        0.3,
        -2.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/ladder-rung-1",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.012,
            "topRadius": 0.012,
            "height": 0.4,
            "radialSegments": 48,
            "chamfer": 0.00042000000000000007
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 174
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/ladder-rung-2",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.48,
        0.6,
        -2.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/ladder-rung-2",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.012,
            "topRadius": 0.012,
            "height": 0.4,
            "radialSegments": 48,
            "chamfer": 0.00042000000000000007
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 175
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/ladder-rung-3",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.48,
        0.8999999999999999,
        -2.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/ladder-rung-3",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.012,
            "topRadius": 0.012,
            "height": 0.4,
            "radialSegments": 48,
            "chamfer": 0.00042000000000000007
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 176
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/ladder-rung-4",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.48,
        1.2,
        -2.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/ladder-rung-4",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.012,
            "topRadius": 0.012,
            "height": 0.4,
            "radialSegments": 48,
            "chamfer": 0.00042000000000000007
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 177
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/ladder-rung-5",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.48,
        1.5,
        -2.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/ladder-rung-5",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.012,
            "topRadius": 0.012,
            "height": 0.4,
            "radialSegments": 48,
            "chamfer": 0.00042000000000000007
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 178
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/ladder-rung-6",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.48,
        1.8,
        -2.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/ladder-rung-6",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.012,
            "topRadius": 0.012,
            "height": 0.4,
            "radialSegments": 48,
            "chamfer": 0.00042000000000000007
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 179
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/ladder-rung-7",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.48,
        2.0999999999999996,
        -2.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/ladder-rung-7",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.012,
            "topRadius": 0.012,
            "height": 0.4,
            "radialSegments": 48,
            "chamfer": 0.00042000000000000007
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 180
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/ladder-rung-8",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.48,
        2.4,
        -2.1,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/upper-walkway-group/ladder-rung-8",
        "assetId": "e03-01-ed-coating-dip-tank",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.012,
            "topRadius": 0.012,
            "height": 0.4,
            "radialSegments": 48,
            "chamfer": 0.00042000000000000007
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 181
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/e03-01-ed-coating-dip-tank:body-entry",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.8,
        2.1,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank:body-entry",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 182
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/e03-01-ed-coating-dip-tank:body-exit",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.8,
        2.1,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank:body-exit",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 183
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/e03-01-ed-coating-dip-tank:supply-port",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.55,
        0.72,
        1.56,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank:supply-port",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 184
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/e03-01-ed-coating-dip-tank:return-port",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.55,
        1.45,
        1.56,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank:return-port",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 185
    },
    {
      "id": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base/e03-01-ed-coating-dip-tank:drain-port",
      "parent": "e03-01-ed-coating-dip-tank/e03-01-ed-coating-dip-tank:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.42,
        1.58,
        1
      ],
      "sourceUserData": {
        "partId": "e03-01-ed-coating-dip-tank:drain-port",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 186
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "전처리 전착 침지조(ED Coating Dip Tank) 설계 지침(입·출구 경사 케이싱 장방형 스테인리스 침지 탱크, 외측 보강 H빔 리브, 좌·우 측면 위어 오버플로 거터 및 격막 전극 튜브 뱅크, 측벽 순환 펌프·에덕터 노즐 배관 매니폴드 및 플랜지 중공 관통홀, 상부 점검 보도·난간, 외벽 중앙 DS_Brand_Plate 명판)에 따른 자체 설계"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S07 KUKA Body in White",
      "url": "https://www.kuka.com/en-us/products/production-systems/systems/body-in-white-production",
      "basis": "제품군 분류 참고; 열람하지 않음"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S08 Dürr Paint Shop and Application Technology",
      "url": "https://www.durr.com/en/products/paint-shop-application-technology",
      "basis": "제품군 분류 참고; 열람하지 않음"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S02 Daifuku Intralogistics",
      "url": "https://www.daifuku.com/solution/intralogistics/",
      "basis": "제품군 분류 참고; 열람하지 않음"
    }
  ],
  "rights": {
    "id": "e03-01-ed-coating-dip-tank",
    "assetTypeId": "e03-01-ed-coating-dip-tank",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:315039273b331338ce11d377f6e352e3f79474c38d58b0329867ddec0af31d01",
    "modelSource": "kit/models/e03-01-ed-coating-dip-tank.mjs",
    "dslExampleSource": "dsl/models/e03-01-ed-coating-dip-tank.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/e03-01-ed-coating-dip-tank.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/e03-01-ed-coating-dip-tank.txt",
      "sha256": "sha256:6d58b9e653ca9e7b192a082cfc8ccca3f92b22f3eb379ae6dfb7fd8435b23be2",
      "bytes": 808
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/e03-01-ed-coating-dip-tank/model.glb",
      "bytes": 1572252,
      "sha256": "sha256:eb58542d3413467064dd340dcc247153159988b6f513527e9a0fcf4d9817c6c2"
    },
    "licenses": [
      {
        "path": "open-assets/e03-01-ed-coating-dip-tank/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/e03-01-ed-coating-dip-tank/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/e03-01-ed-coating-dip-tank/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/e03-01-ed-coating-dip-tank/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/e03-01-ed-coating-dip-tank/LICENSES/ASSET-NOTICES/e03-01-ed-coating-dip-tank.txt",
        "bytes": 808,
        "sha256": "sha256:6d58b9e653ca9e7b192a082cfc8ccca3f92b22f3eb379ae6dfb7fd8435b23be2"
      }
    ],
    "source": {
      "path": "kit/models/e03-01-ed-coating-dip-tank.mjs",
      "bytes": 539215,
      "sha256": "sha256:315039273b331338ce11d377f6e352e3f79474c38d58b0329867ddec0af31d01"
    },
    "ds2": {
      "path": "dsl/models/e03-01-ed-coating-dip-tank.ds2",
      "bytes": 2757,
      "sha256": "sha256:ff6c4979094f899c826db51433d6d48e789616a83b6a3f910c7665bcf0942352",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 187,
    "triangles": 79916,
    "maxMatrixError": 0,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 11,
    "nodeComparisons": 2057,
    "semanticFrameComparisons": 77,
    "acceptanceCases": 4,
    "acceptanceFrameComparisons": 28,
    "maxMotionMatrixError": 0
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "e03-01-ed-coating-dip-tank",
    "kind": "equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "E 자동차모빌리티 / E03 전처리와 도장",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "inlet": {
        "frameId": "body-entry",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -3.8,
            2.1,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "outlet": {
        "frameId": "body-exit",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            3.8,
            2.1,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "supply": {
        "frameId": "supply-port",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -2.55,
            0.72,
            1.56
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "return": {
        "frameId": "return-port",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            2.55,
            1.45,
            1.56
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "drain": {
        "frameId": "drain-port",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0.42,
            1.58
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
