{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "d02-02-stiffener-fitting-portal",
  "assetTypeId": "d02-02-stiffener-fitting-portal",
  "label": "보강재 장착 포털",
  "category": "D 조선해양",
  "description": "길이 20.0 m·게이지 16.0 m 레일 위를 주행하는 포털 갠트리(거더·다리·엔드트럭)와 횡행·승강 보강재 핸들링 헤드(전자석 클램프 2기·클램프 조·위치 결정 롤러·택 용접 토치 2기)로 평패널 위에 종골 보강재를 정밀 위치 결정 및 가접하는 설비",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -1.100000023841858,
      -7.152557379708213e-9,
      -8.399999618530273
    ],
    "max": [
      19,
      5.250000011920929,
      8.399999618530273
    ]
  },
  "size": [
    20.100000023841858,
    5.250000019073487,
    16.799999237060547
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 53,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 10,
      "blindSocketHeads": 12,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 10,
    "warnings": [],
    "changedMeshes": 75,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 87788,
      "afterTriangles": 73004,
      "reachedTarget": true,
      "changedMeshes": 22,
      "changes": [
        {
          "meshes": [
            "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system/rack-bar-north",
            "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system/rack-bar-south"
          ],
          "radiusM": 0.002,
          "dimensionsM": [
            20,
            0.06,
            0.045
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-left/jaw-pad-left",
            "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-right/jaw-pad-right"
          ],
          "radiusM": 0.002,
          "dimensionsM": [
            0.28,
            0.09,
            0.018
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/cross-rack-bar"
          ],
          "radiusM": 0.003,
          "dimensionsM": [
            0.05,
            0.06,
            13.6
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-1",
            "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-2",
            "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-3",
            "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-4",
            "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-5",
            "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-6",
            "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-7",
            "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-8",
            "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-9",
            "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-10",
            "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-11",
            "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-12",
            "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-13",
            "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-14",
            "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-15",
            "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-16",
            "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-17"
          ],
          "radiusM": 0.004,
          "dimensionsM": [
            0.16,
            0.24,
            14
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        }
      ],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/d02-02-stiffener-fitting-portal.mjs",
    "sourceSha256": "sha256:cfa087a8929495fbda0ff99366b091aaaf0a02752a5daedef4c824c1fe86d57c",
    "deliverySha256": "sha256:4cbb61eb9bad1311a5ebccd5b72d917faa42cae60d65c0ba5ac01b8faa193b0b",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:4eb8f98bf7daa053b2540a366ff26caf638cbe8d0eafdea4d3671ae1b7caaf3a",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:4eb8f98bf7daa053b2540a366ff26caf638cbe8d0eafdea4d3671ae1b7caaf3a",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [],
  "parameterValues": {},
  "joints": [
    {
      "id": "gantry",
      "label": "포털 갠트리 주행 (X축)",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "unit": "m",
      "min": 0,
      "max": 18,
      "initial": 0
    },
    {
      "id": "head_y",
      "label": "보강재 핸들링 헤드 횡행 (Z축)",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "unit": "m",
      "min": -6,
      "max": 6,
      "initial": 0
    },
    {
      "id": "head_z",
      "label": "보강재 핸들링 헤드 승강 (-Y축)",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "unit": "m",
      "min": 0,
      "max": 1,
      "initial": 0
    },
    {
      "id": "grip",
      "label": "보강재 클램프 조 파지 (Z축)",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "unit": "m",
      "min": 0,
      "max": 0.05,
      "initial": 0
    }
  ],
  "initialState": {
    "gantry": 0,
    "head_y": 0,
    "head_z": 0,
    "grip": 0
  },
  "bindings": [
    {
      "id": "gantry",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly",
      "gltfNode": 34
    },
    {
      "id": "head_y",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage",
      "gltfNode": 61
    },
    {
      "id": "head_z",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "gltfNode": 66
    },
    {
      "id": "grip",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        1.72,
        -0.14
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-left",
      "gltfNode": 86
    },
    {
      "id": "grip",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        1.72,
        0.14
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1,
      "nodeName": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-right",
      "gltfNode": 89
    }
  ],
  "jointBindings": [
    {
      "id": "gantry",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly",
      "gltfNode": 34
    },
    {
      "id": "head_y",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage",
      "gltfNode": 61
    },
    {
      "id": "head_z",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "gltfNode": 66
    },
    {
      "id": "grip",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        1.72,
        -0.14
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-left",
      "gltfNode": 86
    },
    {
      "id": "grip",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        1.72,
        0.14
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": -1,
      "nodeName": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-right",
      "gltfNode": 89
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base",
      "nodeName": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "panel-datum": {
      "id": "panel-datum",
      "node": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/d02-02-stiffener-fitting-portal:panel-datum",
      "nodeName": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/d02-02-stiffener-fitting-portal:panel-datum",
      "gltfNode": 33,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.6,
        0,
        1
      ],
      "position": [
        0,
        0.6,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "head-tcp": {
      "id": "head-tcp",
      "node": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/d02-02-stiffener-fitting-portal:head-tcp",
      "nodeName": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/d02-02-stiffener-fitting-portal:head-tcp",
      "gltfNode": 85,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.6,
        0,
        1
      ],
      "position": [
        0,
        1.6,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    }
  },
  "ports": {
    "mount": "base",
    "work": "head-tcp"
  },
  "nodes": [
    {
      "id": "d02-02-stiffener-fitting-portal",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "d02-02-stiffener-fitting-portal",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 53,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 10,
            "blindSocketHeads": 12,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 10,
          "warnings": [],
          "changedMeshes": 75,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 87788,
            "afterTriangles": 73004,
            "reachedTarget": true,
            "changedMeshes": 22,
            "changes": [
              {
                "meshes": [
                  "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system/rack-bar-north",
                  "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system/rack-bar-south"
                ],
                "radiusM": 0.002,
                "dimensionsM": [
                  20,
                  0.06,
                  0.045
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-left/jaw-pad-left",
                  "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-right/jaw-pad-right"
                ],
                "radiusM": 0.002,
                "dimensionsM": [
                  0.28,
                  0.09,
                  0.018
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/cross-rack-bar"
                ],
                "radiusM": 0.003,
                "dimensionsM": [
                  0.05,
                  0.06,
                  13.6
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-1",
                  "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-2",
                  "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-3",
                  "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-4",
                  "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-5",
                  "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-6",
                  "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-7",
                  "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-8",
                  "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-9",
                  "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-10",
                  "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-11",
                  "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-12",
                  "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-13",
                  "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-14",
                  "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-15",
                  "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-16",
                  "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-17"
                ],
                "radiusM": 0.004,
                "dimensionsM": [
                  0.16,
                  0.24,
                  14
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              }
            ],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "d02-02-stiffener-fitting-portal",
          "coordinate_profile": "lib3d-world/1",
          "label": "보강재 장착 포털",
          "category": "D 조선해양 / D02 패널과 블록 조립",
          "summary": "길이 20.0 m·게이지 16.0 m 레일 위를 주행하는 포털 갠트리(거더·다리·엔드트럭)와 횡행·승강 보강재 핸들링 헤드(전자석 클램프 2기·클램프 조·위치 결정 롤러·택 용접 토치 2기)로 평패널 위에 종골 보강재를 정밀 위치 결정 및 가접하는 설비",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [],
          "joints": [
            {
              "id": "gantry",
              "label": "포털 갠트리 주행 (X축)",
              "kind": "prismatic",
              "axis": [
                1,
                0,
                0
              ],
              "unit": "m",
              "min": 0,
              "max": 18,
              "initial": 0
            },
            {
              "id": "head_y",
              "label": "보강재 핸들링 헤드 횡행 (Z축)",
              "kind": "prismatic",
              "axis": [
                0,
                0,
                1
              ],
              "unit": "m",
              "min": -6,
              "max": 6,
              "initial": 0
            },
            {
              "id": "head_z",
              "label": "보강재 핸들링 헤드 승강 (-Y축)",
              "kind": "prismatic",
              "axis": [
                0,
                -1,
                0
              ],
              "unit": "m",
              "min": 0,
              "max": 1,
              "initial": 0
            },
            {
              "id": "grip",
              "label": "보강재 클램프 조 파지 (Z축)",
              "kind": "prismatic",
              "axis": [
                0,
                0,
                1
              ],
              "unit": "m",
              "min": 0,
              "max": 0.05,
              "initial": 0
            }
          ],
          "ports": {
            "mount": "base",
            "work": "head-tcp"
          },
          "required_host_features": [
            "prismatic"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "보강재 장착 포털 설계 지침(레일 20 m·게이지 16 m, 포털 갠트리 거더+다리+엔드트럭, 보강재 핸들링 헤드 전자석 클램프 2+위치 결정 롤러+택 용접 토치 2, 관절 gantry 0..18·head_y -6..6·head_z 0..1.0·grip 0..0.05, 프레임 base·head-tcp·panel-datum)에 따른 자체 설계"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S04 Pemamek Shipbuilding",
              "url": "https://pemamek.com/welding-solutions/shipbuilding/",
              "basis": "제품군 분류 참고; 열람하지 않음"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S05 Konecranes Shipyards",
              "url": "https://www.konecranes.com/en-us/industries/shipyards",
              "basis": "제품군 분류 참고; 열람하지 않음"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S06 Wärtsilä Marine Products",
              "url": "https://www.wartsila.com/marine/products",
              "basis": "제품군 분류 참고; 열람하지 않음"
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {},
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base",
          "panel-datum": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/d02-02-stiffener-fitting-portal:panel-datum",
          "head-tcp": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/d02-02-stiffener-fitting-portal:head-tcp"
        },
        "jointBindings": [
          {
            "id": "gantry",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly"
          },
          {
            "id": "head_y",
            "kind": "prismatic",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage"
          },
          {
            "id": "head_z",
            "kind": "prismatic",
            "axis": [
              0,
              -1,
              0
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly"
          },
          {
            "id": "grip",
            "kind": "prismatic",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0,
              1.72,
              -0.14
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-left"
          },
          {
            "id": "grip",
            "kind": "prismatic",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0,
              1.72,
              0.14
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": -1,
            "nodeName": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-right"
          }
        ],
        "joints": [
          {
            "id": "gantry",
            "label": "포털 갠트리 주행 (X축)",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "unit": "m",
            "min": 0,
            "max": 18,
            "initial": 0,
            "value": 0
          },
          {
            "id": "head_y",
            "label": "보강재 핸들링 헤드 횡행 (Z축)",
            "kind": "prismatic",
            "axis": [
              0,
              0,
              1
            ],
            "unit": "m",
            "min": -6,
            "max": 6,
            "initial": 0,
            "value": 0
          },
          {
            "id": "head_z",
            "label": "보강재 핸들링 헤드 승강 (-Y축)",
            "kind": "prismatic",
            "axis": [
              0,
              -1,
              0
            ],
            "unit": "m",
            "min": 0,
            "max": 1,
            "initial": 0,
            "value": 0
          },
          {
            "id": "grip",
            "label": "보강재 클램프 조 파지 (Z축)",
            "kind": "prismatic",
            "axis": [
              0,
              0,
              1
            ],
            "unit": "m",
            "min": 0,
            "max": 0.05,
            "initial": 0,
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 41
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "보강재 장착 포털 설계 지침(레일 20 m·게이지 16 m, 포털 갠트리 거더+다리+엔드트럭, 보강재 핸들링 헤드 전자석 클램프 2+위치 결정 롤러+택 용접 토치 2, 관절 gantry 0..18·head_y -6..6·head_z 0..1.0·grip 0..0.05, 프레임 base·head-tcp·panel-datum)에 따른 자체 설계"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S04 Pemamek Shipbuilding",
            "url": "https://pemamek.com/welding-solutions/shipbuilding/",
            "basis": "제품군 분류 참고; 열람하지 않음"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S05 Konecranes Shipyards",
            "url": "https://www.konecranes.com/en-us/industries/shipyards",
            "basis": "제품군 분류 참고; 열람하지 않음"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S06 Wärtsilä Marine Products",
            "url": "https://www.wartsila.com/marine/products",
            "basis": "제품군 분류 참고; 열람하지 않음"
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "gantry": 0,
          "head_y": 0,
          "head_z": 0,
          "grip": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base",
      "parent": "d02-02-stiffener-fitting-portal",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal:base"
      },
      "gltfNode": 1
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "floor-rail-system",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 2
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system/rail-anchor-plate-north",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -8,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system/rail-anchor-plate-north",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 3
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system/rail-anchor-plate-south",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        8,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system/rail-anchor-plate-south",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 4
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system/rail-north",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        9,
        0.09,
        -8,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system/rail-north",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 20,
            "height": 0.11,
            "depth": 0.11,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 5
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system/rail-south",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        9,
        0.09,
        8,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system/rail-south",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 20,
            "height": 0.11,
            "depth": 0.11,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 6
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system/rack-bar-north",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        9,
        0.1,
        -7.89,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system/rack-bar-north",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 20,
            "height": 0.06,
            "depth": 0.045,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 7
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system/rack-bar-south",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        9,
        0.1,
        7.89,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/floor-rail-system/rack-bar-south",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 20,
            "height": 0.06,
            "depth": 0.045,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 8
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "panel-bed",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 9
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-long-girder-1",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        9,
        0.18,
        -6.5,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-long-girder-1",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 18,
            "height": 0.36,
            "depth": 0.22,
            "radius": 0.005,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 10
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-long-girder-2",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        9,
        0.18,
        -3.25,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-long-girder-2",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 18,
            "height": 0.36,
            "depth": 0.22,
            "radius": 0.005,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 11
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-long-girder-3",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        9,
        0.18,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-long-girder-3",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 18,
            "height": 0.36,
            "depth": 0.22,
            "radius": 0.005,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 12
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-long-girder-4",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        9,
        0.18,
        3.25,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-long-girder-4",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 18,
            "height": 0.36,
            "depth": 0.22,
            "radius": 0.005,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 13
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-long-girder-5",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        9,
        0.18,
        6.5,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-long-girder-5",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 18,
            "height": 0.36,
            "depth": 0.22,
            "radius": 0.005,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 14
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-1",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.4,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-1",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.24,
            "depth": 14,
            "radius": 0.004,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 15
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-2",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.475,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-2",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.24,
            "depth": 14,
            "radius": 0.004,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 16
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-3",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.55,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-3",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.24,
            "depth": 14,
            "radius": 0.004,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 17
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-4",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        3.6249999999999996,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-4",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.24,
            "depth": 14,
            "radius": 0.004,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 18
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-5",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        4.7,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-5",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.24,
            "depth": 14,
            "radius": 0.004,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 19
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-6",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        5.775,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-6",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.24,
            "depth": 14,
            "radius": 0.004,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 20
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-7",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        6.85,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-7",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.24,
            "depth": 14,
            "radius": 0.004,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 21
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-8",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        7.925,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-8",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.24,
            "depth": 14,
            "radius": 0.004,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 22
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-9",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        9,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-9",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.24,
            "depth": 14,
            "radius": 0.004,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 23
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-10",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        10.075,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-10",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.24,
            "depth": 14,
            "radius": 0.004,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 24
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-11",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        11.15,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-11",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.24,
            "depth": 14,
            "radius": 0.004,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 25
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-12",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        12.225,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-12",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.24,
            "depth": 14,
            "radius": 0.004,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 26
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-13",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        13.299999999999999,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-13",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.24,
            "depth": 14,
            "radius": 0.004,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 27
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-14",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        14.375,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-14",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.24,
            "depth": 14,
            "radius": 0.004,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 28
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-15",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        15.45,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-15",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.24,
            "depth": 14,
            "radius": 0.004,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 29
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-16",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        16.525,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-16",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.24,
            "depth": 14,
            "radius": 0.004,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 30
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-17",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        17.599999999999998,
        0.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-cross-beam-17",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.24,
            "depth": 14,
            "radius": 0.004,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 31
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-datum-plate",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.56,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/panel-bed/bed-datum-plate",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 32
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/d02-02-stiffener-fitting-portal:panel-datum",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.6,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal:panel-datum"
      },
      "gltfNode": 33
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "gantry-assembly",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 34
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-north",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -8,
        1
      ],
      "sourceUserData": {
        "partId": "end-truck-north",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 35
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-north/truck-beam-north",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-north",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.32,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-north/truck-beam-north",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.8,
            "height": 0.36,
            "depth": 0.48,
            "radius": 0.01,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 36
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-north/truck-wheel-north-1",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-north",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.62,
        0.275,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-north/truck-wheel-north-1",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 37
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-north/truck-wheel-north-2",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-north",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.62,
        0.275,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-north/truck-wheel-north-2",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 38
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-north/drive-motor-north",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-north",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.35,
        0.55,
        0.24200000000000002,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-north/drive-motor-north",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.1,
            "topRadius": 0.1,
            "height": 0.34,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 39
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-north/drive-gearbox-north",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-north",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.35,
        0.26,
        0.17600000000000002,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-north/drive-gearbox-north",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.24,
            "height": 0.26,
            "depth": 0.22,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 40
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-north/drive-pinion-north",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-north",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.35,
        0.11,
        0.11,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-north/drive-pinion-north",
        "assetId": "d02-02-stiffener-fitting-portal",
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 41
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/portal-leg-north",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -8.22,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/portal-leg-north",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 42
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/portal-leg-flange-f-north",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.45,
        1.925,
        -8,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/portal-leg-flange-f-north",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.06,
            "height": 2.85,
            "depth": 0.54,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 43
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/portal-leg-flange-b-north",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.45,
        1.925,
        -8,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/portal-leg-flange-b-north",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.06,
            "height": 2.85,
            "depth": 0.54,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 44
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-south",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        8,
        1
      ],
      "sourceUserData": {
        "partId": "end-truck-south",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 45
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-south/truck-beam-south",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-south",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.32,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-south/truck-beam-south",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.8,
            "height": 0.36,
            "depth": 0.48,
            "radius": 0.01,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 46
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-south/truck-wheel-south-1",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-south",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.62,
        0.275,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-south/truck-wheel-south-1",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 47
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-south/truck-wheel-south-2",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-south",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.62,
        0.275,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-south/truck-wheel-south-2",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 48
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-south/drive-motor-south",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-south",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.35,
        0.55,
        -0.24200000000000002,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-south/drive-motor-south",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.1,
            "topRadius": 0.1,
            "height": 0.34,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 49
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-south/drive-gearbox-south",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-south",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.35,
        0.26,
        -0.17600000000000002,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-south/drive-gearbox-south",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.24,
            "height": 0.26,
            "depth": 0.22,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 50
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-south/drive-pinion-south",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-south",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.35,
        0.11,
        -0.11,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/end-truck-south/drive-pinion-south",
        "assetId": "d02-02-stiffener-fitting-portal",
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 51
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/portal-leg-south",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        7.78,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/portal-leg-south",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 52
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/portal-leg-flange-f-south",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.45,
        1.925,
        8,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/portal-leg-flange-f-south",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.06,
            "height": 2.85,
            "depth": 0.54,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 53
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/portal-leg-flange-b-south",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.45,
        1.925,
        8,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/portal-leg-flange-b-south",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.06,
            "height": 2.85,
            "depth": 0.54,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 54
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/portal-box-girder",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.35,
        3.85,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/portal-box-girder",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1,
            "height": 1.1,
            "depth": 16.8,
            "radius": 0.015,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 55
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/cross-guide-rail-upper",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.18,
        4.22,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/cross-guide-rail-upper",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.07,
            "depth": 13.6,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 56
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/cross-guide-rail-lower",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.18,
        3.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/cross-guide-rail-lower",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.07,
            "depth": 13.6,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 57
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/cross-rack-bar",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.17,
        3.85,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/cross-rack-bar",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.06,
            "depth": 13.6,
            "radius": 0.003,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 58
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/portal-power-cabinet-1",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.55,
        4.825,
        -4.5,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/portal-power-cabinet-1",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.55,
            "height": 0.85,
            "depth": 1.5,
            "radius": 0.008,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 59
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/portal-power-cabinet-2",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.55,
        4.825,
        4.5,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/portal-power-cabinet-2",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.55,
            "height": 0.85,
            "depth": 1.5,
            "radius": 0.008,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 60
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "head-y-carriage",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 61
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-y-saddle",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.34,
        3.85,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-y-saddle",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.32,
            "height": 0.96,
            "depth": 1.1,
            "radius": 0.008,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 62
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-y-drive-motor",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.34,
        4.48,
        -0.32,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-y-drive-motor",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.09,
            "topRadius": 0.09,
            "height": 0.32,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 63
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/vertical-guide-tower",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        3.65,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/vertical-guide-tower",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.38,
            "height": 1.45,
            "depth": 0.84,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 64
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-lift-motor",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        4.55,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-lift-motor",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.095,
            "topRadius": 0.095,
            "height": 0.36,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 65
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "head-z-assembly",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 66
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/lift-mast-column-1",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.55,
        2.95,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/lift-mast-column-1",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 1.8,
            "depth": 0.18,
            "radius": 0.005,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 67
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/lift-mast-column-2",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.55,
        2.95,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/lift-mast-column-2",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 1.8,
            "depth": 0.18,
            "radius": 0.005,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 68
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/handling-head-beam",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.04,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/handling-head-beam",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 2.2,
            "height": 0.24,
            "depth": 0.56,
            "radius": 0.008,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 69
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-side-web",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.24,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-side-web",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 70
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/electromagnet-clamp-1",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.68,
        1.69,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/electromagnet-clamp-1",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.46,
            "height": 0.18,
            "depth": 0.22,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 71
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/electromagnet-clamp-2",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.68,
        1.69,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/electromagnet-clamp-2",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.46,
            "height": 0.18,
            "depth": 0.22,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 72
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/magnet-susp-rod-1",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.68,
        1.86,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/magnet-susp-rod-1",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.032,
            "topRadius": 0.032,
            "height": 0.2,
            "radialSegments": 48,
            "chamfer": 0.0011200000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 73
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/magnet-susp-rod-2",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.68,
        1.86,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/magnet-susp-rod-2",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.032,
            "topRadius": 0.032,
            "height": 0.2,
            "radialSegments": 48,
            "chamfer": 0.0011200000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 74
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/alignment-roller-1",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.28,
        1.72,
        -0.11,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/alignment-roller-1",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 75
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/alignment-roller-2",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.28,
        1.72,
        0.11,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/alignment-roller-2",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 76
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/alignment-roller-3",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.28,
        1.72,
        -0.11,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/alignment-roller-3",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 77
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/alignment-roller-4",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.28,
        1.72,
        0.11,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/alignment-roller-4",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 78
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-wire-feeder-1",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.15,
        2.26,
        -0.2,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-wire-feeder-1",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.2,
            "depth": 0.16,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 79
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-wire-feeder-2",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.15,
        2.26,
        0.2,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-wire-feeder-2",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.2,
            "depth": 0.16,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 80
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-weld-torch-1",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.9393727128473789,
        0.34289780745545134,
        0,
        0,
        -0.34289780745545134,
        0.9393727128473789,
        0,
        -0.12,
        1.71,
        -0.16,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-weld-torch-1",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.018,
            "topRadius": 0.018,
            "height": 0.26,
            "radialSegments": 48,
            "chamfer": 0.00063
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 81
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-weld-torch-2",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.9393727128473789,
        -0.34289780745545134,
        0,
        0,
        0.34289780745545134,
        0.9393727128473789,
        0,
        0.12,
        1.71,
        0.16,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-weld-torch-2",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.018,
            "topRadius": 0.018,
            "height": 0.26,
            "radialSegments": 48,
            "chamfer": 0.00063
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 82
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-nozzle-1",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.12,
        1.62,
        -0.09,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-nozzle-1",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.01,
            "topRadius": 0.01,
            "height": 0.05,
            "radialSegments": 48,
            "chamfer": 0.00035000000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 83
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-nozzle-2",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.12,
        1.62,
        0.09,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-nozzle-2",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.01,
            "topRadius": 0.01,
            "height": 0.05,
            "radialSegments": 48,
            "chamfer": 0.00035000000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 84
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/d02-02-stiffener-fitting-portal:head-tcp",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.6,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal:head-tcp"
      },
      "gltfNode": 85
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-left",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.72,
        -0.14,
        1
      ],
      "sourceUserData": {
        "partId": "gripper-jaw-left",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 86
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-left/jaw-block-left",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-left",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-left/jaw-block-left",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.32,
            "height": 0.12,
            "depth": 0.05,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 87
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-left/jaw-pad-left",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-left",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.01,
        0.034,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-left/jaw-pad-left",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.28,
            "height": 0.09,
            "depth": 0.018,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 88
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-right",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.72,
        0.14,
        1
      ],
      "sourceUserData": {
        "partId": "gripper-jaw-right",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 89
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-right/jaw-block-right",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-right",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-right/jaw-block-right",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.32,
            "height": 0.12,
            "depth": 0.05,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 90
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-right/jaw-pad-right",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-right",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.01,
        -0.034,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/gripper-jaw-right/jaw-pad-right",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.28,
            "height": 0.09,
            "depth": 0.018,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 91
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-l-0",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.8799999999999999,
        2.04,
        0.285,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-l-0",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.009,
            "height": 0.0081,
            "socketRadius": 0.0038699999999999997,
            "socketDepth": 0.0034019999999999996,
            "chamfer": 0.000315
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 92
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-l-1",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.9149999999999999,
        2.1006217782649106,
        0.285,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-l-1",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.009,
            "height": 0.0081,
            "socketRadius": 0.0038699999999999997,
            "socketDepth": 0.0034019999999999996,
            "chamfer": 0.000315
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 93
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-l-2",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.985,
        2.1006217782649106,
        0.285,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-l-2",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.009,
            "height": 0.0081,
            "socketRadius": 0.0038699999999999997,
            "socketDepth": 0.0034019999999999996,
            "chamfer": 0.000315
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 94
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-l-3",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.02,
        2.04,
        0.285,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-l-3",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.009,
            "height": 0.0081,
            "socketRadius": 0.0038699999999999997,
            "socketDepth": 0.0034019999999999996,
            "chamfer": 0.000315
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 95
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-l-4",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.985,
        1.9793782217350893,
        0.285,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-l-4",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.009,
            "height": 0.0081,
            "socketRadius": 0.0038699999999999997,
            "socketDepth": 0.0034019999999999996,
            "chamfer": 0.000315
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 96
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-l-5",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.9149999999999999,
        1.9793782217350893,
        0.285,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-l-5",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.009,
            "height": 0.0081,
            "socketRadius": 0.0038699999999999997,
            "socketDepth": 0.0034019999999999996,
            "chamfer": 0.000315
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 97
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-r-0",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.02,
        2.04,
        0.285,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-r-0",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.009,
            "height": 0.0081,
            "socketRadius": 0.0038699999999999997,
            "socketDepth": 0.0034019999999999996,
            "chamfer": 0.000315
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 98
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-r-1",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.985,
        2.1006217782649106,
        0.285,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-r-1",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.009,
            "height": 0.0081,
            "socketRadius": 0.0038699999999999997,
            "socketDepth": 0.0034019999999999996,
            "chamfer": 0.000315
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 99
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-r-2",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.9149999999999999,
        2.1006217782649106,
        0.285,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-r-2",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.009,
            "height": 0.0081,
            "socketRadius": 0.0038699999999999997,
            "socketDepth": 0.0034019999999999996,
            "chamfer": 0.000315
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 100
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-r-3",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.8799999999999999,
        2.04,
        0.285,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-r-3",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.009,
            "height": 0.0081,
            "socketRadius": 0.0038699999999999997,
            "socketDepth": 0.0034019999999999996,
            "chamfer": 0.000315
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 101
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-r-4",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.9149999999999999,
        1.9793782217350893,
        0.285,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-r-4",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.009,
            "height": 0.0081,
            "socketRadius": 0.0038699999999999997,
            "socketDepth": 0.0034019999999999996,
            "chamfer": 0.000315
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 102
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-r-5",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.985,
        1.9793782217350893,
        0.285,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/head-beam-bolts-r-5",
        "assetId": "d02-02-stiffener-fitting-portal",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.009,
            "height": 0.0081,
            "socketRadius": 0.0038699999999999997,
            "socketDepth": 0.0034019999999999996,
            "chamfer": 0.000315
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 103
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-1",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-1",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 104
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-1-rib-2",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.96066467675309,
        -0.21536738723378754,
        0.17532902599105737,
        0,
        -0.21536738723378754,
        -0.1791719923784243,
        0.9599553560782071,
        0,
        -0.17532902599105737,
        -0.9599553560782071,
        -0.21850731562533432,
        0,
        -0.1568341098045847,
        2.1167704814269777,
        -0.2087175477901248,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-1-rib-2",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 105
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-1-rib-4",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9533511630772372,
        -0.23524156600535612,
        0.18916385881723488,
        0,
        -0.23524156600535612,
        -0.18628025964028394,
        0.9539187965920873,
        0,
        -0.18916385881723488,
        -0.9539187965920873,
        -0.23292909656304683,
        0,
        -0.16554020945154896,
        2.071815250272836,
        -0.21947417837613786,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-1-rib-4",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 106
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-1-rib-6",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.963479884891236,
        -0.2072377066191069,
        0.16958491785894064,
        0,
        -0.2072377066191069,
        -0.17599484330323456,
        0.9623296462678075,
        0,
        -0.16958491785894064,
        -0.9623296462678075,
        -0.21251495841199852,
        0,
        -0.17407612820375143,
        2.027016902080615,
        -0.23004543779888836,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-1-rib-6",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 107
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-1-rib-8",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9861816770604596,
        -0.12522261511503377,
        0.1084665685544236,
        0,
        -0.12522261511503377,
        -0.13477615227665485,
        0.9829316789285265,
        0,
        -0.1084665685544236,
        -0.9829316789285265,
        -0.14859447521619518,
        0,
        -0.18039969532405084,
        1.9842580323933523,
        -0.23820687209922548,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-1-rib-8",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 108
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-1-rib-10",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.999579233776515,
        0.020640403503884124,
        -0.020379625755934716,
        0,
        0.020640403503884124,
        -0.012501082607387914,
        0.9997088059414301,
        0,
        0.020379625755934716,
        -0.9997088059414301,
        -0.012921848830872884,
        0,
        -0.1824687400753058,
        1.9454212367540888,
        -0.24173402731799834,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-1-rib-10",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 109
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-1-rib-12",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9549690745351457,
        0.18258972880839094,
        -0.2338697449760563,
        0,
        0.18258972880839094,
        0.25964193002557445,
        0.9482863803230926,
        0,
        0.2338697449760563,
        -0.9482863803230926,
        0.21461100456072013,
        0,
        -0.17876830191669688,
        1.9143827749157973,
        -0.2388912120872267,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-1-rib-12",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 110
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-1-rib-14",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.8902100994516255,
        0.23592977390159406,
        -0.3896961901546762,
        0,
        0.23592977390159406,
        0.4930056595803932,
        0.837426152808977,
        0,
        0.3896961901546762,
        -0.837426152808977,
        0.3832157590320189,
        0,
        -0.17156548054402854,
        1.8940120547397246,
        -0.23197687409001666,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-1-rib-14",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 111
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-1-rib-16",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.8437803391456284,
        0.23709080825398907,
        -0.4814796858775648,
        0,
        0.23709080825398907,
        0.6401730035060642,
        0.7307300967002078,
        0,
        0.4814796858775648,
        -0.7307300967002078,
        0.48395334265169265,
        0,
        -0.16154038316243494,
        1.876243077962966,
        -0.22198834502362205,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-1-rib-16",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 112
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-1-rib-18",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.8218007227316874,
        0.22846709057183404,
        -0.5219639457312332,
        0,
        0.22846709057183404,
        0.7070851673782836,
        0.6692035225544364,
        0,
        0.5219639457312332,
        -0.6692035225544364,
        0.528885890109971,
        0,
        -0.1497855037108549,
        1.8600687181083673,
        -0.21011563433417874,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-1-rib-18",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 113
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-1-rib-20",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.8202025008956704,
        0.22759419491984795,
        -0.5248511598189283,
        0,
        0.22759419491984795,
        0.7119030141172504,
        0.664375632402002,
        0,
        0.5248511598189283,
        -0.664375632402002,
        0.5321055150129208,
        0,
        -0.1373933361282272,
        1.8444818486987753,
        -0.19754875146782278,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-1-rib-20",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 114
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-2",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-2",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 115
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-2-rib-2",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9747721930260246,
        0.13812640713586163,
        -0.1753290259910574,
        0,
        0.13812640713586163,
        0.24373512259930952,
        0.9599553560782074,
        0,
        0.1753290259910574,
        -0.9599553560782074,
        0.2185073156253341,
        0,
        0.1568341098045847,
        2.1167704814269777,
        0.2087175477901248,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-2-rib-2",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 116
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-2-rib-4",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9709772722678243,
        0.14635631608068306,
        -0.18916385881723485,
        0,
        0.14635631608068306,
        0.26195182429522224,
        0.9539187965920873,
        0,
        0.18916385881723485,
        -0.9539187965920873,
        0.2329290965630464,
        0,
        0.16554020945154896,
        2.071815250272836,
        0.21947417837613786,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-2-rib-4",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 117
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-2-rib-6",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9762814931348239,
        0.1345934686276234,
        -0.1695849178589406,
        0,
        0.1345934686276234,
        0.2362334652771746,
        0.9623296462678071,
        0,
        0.1695849178589406,
        -0.9623296462678071,
        0.21251495841199852,
        0,
        0.17407612820375143,
        2.027016902080615,
        0.23004543779888836,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-2-rib-6",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 118
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-2-rib-8",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9897570493783221,
        0.09282233950911871,
        -0.1084665685544236,
        0,
        0.09282233950911871,
        0.1588374258378732,
        0.9829316789285266,
        0,
        0.1084665685544236,
        -0.9829316789285266,
        0.1485944752161953,
        0,
        0.18039969532405084,
        1.9842580323933523,
        0.23820687209922548,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-2-rib-8",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 119
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-2-rib-10",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9995899692099333,
        -0.02011378405304839,
        0.020379625755934716,
        0,
        -0.02011378405304839,
        0.013331879620940179,
        0.99970880594143,
        0,
        -0.020379625755934716,
        -0.99970880594143,
        0.01292184883087344,
        0,
        0.1824687400753058,
        1.9454212367540888,
        0.24173402731799834,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-2-rib-10",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 120
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-2-rib-12",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.930359276826162,
        -0.28237662510968436,
        0.23386974497605625,
        0,
        -0.28237662510968436,
        -0.14497028138688184,
        0.9482863803230924,
        0,
        -0.23386974497605625,
        -0.9482863803230924,
        -0.2146110045607199,
        0,
        0.17876830191669688,
        1.9143827749157973,
        0.2388912120872267,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-2-rib-12",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 121
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-2-rib-14",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.7537824241703458,
        -0.5291020094375066,
        0.3896961901546762,
        0,
        -0.5291020094375066,
        -0.1369981832023648,
        0.837426152808977,
        0,
        -0.3896961901546762,
        -0.837426152808977,
        -0.3832157590320189,
        0,
        0.17156548054402854,
        1.8940120547397246,
        0.23197687409001666,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-2-rib-14",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 122
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-2-rib-16",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5507718447320762,
        -0.6817827272215593,
        0.4814796858775648,
        0,
        -0.6817827272215593,
        -0.03472518738376884,
        0.7307300967002077,
        0,
        -0.4814796858775648,
        -0.7307300967002077,
        -0.48395334265169265,
        0,
        0.16154038316243494,
        1.876243077962966,
        0.22198834502362205,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-2-rib-16",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 123
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-2-rib-18",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.42169772689059504,
        -0.7414341956586488,
        0.5219639457312332,
        0,
        -0.7414341956586488,
        0.04941638299943374,
        0.6692035225544363,
        0,
        -0.5219639457312332,
        -0.6692035225544363,
        -0.5288858901099713,
        0,
        0.1497855037108549,
        1.8600687181083673,
        0.21011563433417874,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-2-rib-18",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 124
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-2-rib-20",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.4112588440300142,
        -0.7452499065708242,
        0.5248511598189283,
        0,
        -0.7452499065708242,
        0.05663564095706497,
        0.6643756324020021,
        0,
        -0.5248511598189283,
        -0.6643756324020021,
        -0.5321055150129208,
        0,
        0.1373933361282272,
        1.8444818486987753,
        0.19754875146782278,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/head-y-carriage/head-z-assembly/tack-torch-cable-2-rib-20",
        "assetId": "d02-02-stiffener-fitting-portal"
      },
      "gltfNode": 125
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.156,
        3.85,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "stiffener-portal-badge",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 126
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        -1,
        0,
        0,
        1,
        0,
        0,
        1,
        0,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "badge-orient",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 127
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient/badge-bezel",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient/badge-bezel",
        "assetId": "d02-02-stiffener-fitting-portal",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 128
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient/badge-backing",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient/badge-backing",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 129
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient/badge-rivet-0",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.4206,
        -0.12059999999999998,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient/badge-rivet-0",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 130
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient/badge-rivet-1",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.4206,
        0.12059999999999998,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient/badge-rivet-1",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 131
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient/badge-rivet-2",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.4206,
        -0.12059999999999998,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient/badge-rivet-2",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 132
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient/badge-rivet-3",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.4206,
        0.12059999999999998,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient/badge-rivet-3",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 133
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient/badge-D",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.20879999999999999,
        0,
        0,
        0,
        0,
        0.20879999999999999,
        0,
        0,
        0,
        0,
        0.0045000000000000005,
        0,
        -0.091872,
        0,
        0.004325,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient/badge-D",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 134
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient/badge-S",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.20879999999999999,
        0,
        0,
        0,
        0,
        0.20879999999999999,
        0,
        0,
        0,
        0,
        0.0045000000000000005,
        0,
        0.091872,
        0,
        0.004325,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient/badge-S",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 135
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient/badge-D-back",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.20879999999999999,
        0,
        -2.5570625166196732e-17,
        0,
        0,
        0.20879999999999999,
        0,
        0,
        5.51091059616309e-19,
        0,
        -0.0045000000000000005,
        0,
        0.091872,
        0,
        -0.004325,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient/badge-D-back",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 136
    },
    {
      "id": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient/badge-S-back",
      "parent": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.20879999999999999,
        0,
        -2.5570625166196732e-17,
        0,
        0,
        0.20879999999999999,
        0,
        0,
        5.51091059616309e-19,
        0,
        -0.0045000000000000005,
        0,
        -0.091872,
        0,
        -0.004325,
        1
      ],
      "sourceUserData": {
        "partId": "d02-02-stiffener-fitting-portal/d02-02-stiffener-fitting-portal:base/gantry-assembly/stiffener-portal-badge/badge-orient/badge-S-back",
        "assetId": "d02-02-stiffener-fitting-portal",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 137
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "보강재 장착 포털 설계 지침(레일 20 m·게이지 16 m, 포털 갠트리 거더+다리+엔드트럭, 보강재 핸들링 헤드 전자석 클램프 2+위치 결정 롤러+택 용접 토치 2, 관절 gantry 0..18·head_y -6..6·head_z 0..1.0·grip 0..0.05, 프레임 base·head-tcp·panel-datum)에 따른 자체 설계"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S04 Pemamek Shipbuilding",
      "url": "https://pemamek.com/welding-solutions/shipbuilding/",
      "basis": "제품군 분류 참고; 열람하지 않음"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S05 Konecranes Shipyards",
      "url": "https://www.konecranes.com/en-us/industries/shipyards",
      "basis": "제품군 분류 참고; 열람하지 않음"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S06 Wärtsilä Marine Products",
      "url": "https://www.wartsila.com/marine/products",
      "basis": "제품군 분류 참고; 열람하지 않음"
    }
  ],
  "rights": {
    "id": "d02-02-stiffener-fitting-portal",
    "assetTypeId": "d02-02-stiffener-fitting-portal",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:cfa087a8929495fbda0ff99366b091aaaf0a02752a5daedef4c824c1fe86d57c",
    "modelSource": "kit/models/d02-02-stiffener-fitting-portal.mjs",
    "dslExampleSource": "dsl/models/d02-02-stiffener-fitting-portal.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/d02-02-stiffener-fitting-portal.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/d02-02-stiffener-fitting-portal.txt",
      "sha256": "sha256:37119e7d5dc30e1fc3139cd3d27c70e339685a05003ce25063134570440965b5",
      "bytes": 813
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/d02-02-stiffener-fitting-portal/model.glb",
      "bytes": 1209460,
      "sha256": "sha256:b8a5bb18747206b3af71a0ecaff05439118ac02e7ae08a922fb959b8ebee6c88"
    },
    "licenses": [
      {
        "path": "open-assets/d02-02-stiffener-fitting-portal/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/d02-02-stiffener-fitting-portal/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/d02-02-stiffener-fitting-portal/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/d02-02-stiffener-fitting-portal/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/d02-02-stiffener-fitting-portal/LICENSES/ASSET-NOTICES/d02-02-stiffener-fitting-portal.txt",
        "bytes": 813,
        "sha256": "sha256:37119e7d5dc30e1fc3139cd3d27c70e339685a05003ce25063134570440965b5"
      }
    ],
    "source": {
      "path": "kit/models/d02-02-stiffener-fitting-portal.mjs",
      "bytes": 23154,
      "sha256": "sha256:4cbb61eb9bad1311a5ebccd5b72d917faa42cae60d65c0ba5ac01b8faa193b0b"
    },
    "ds2": {
      "path": "dsl/models/d02-02-stiffener-fitting-portal.ds2",
      "bytes": 4319,
      "sha256": "sha256:29e2e55c13ae474e474f0af7999639994a06ff6764ec6580df38c24dddaac3af",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 138,
    "triangles": 73004,
    "maxMatrixError": 3.885780586188048e-16,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 16,
    "nodeComparisons": 2208,
    "semanticFrameComparisons": 48,
    "acceptanceCases": 5,
    "acceptanceFrameComparisons": 15,
    "maxMotionMatrixError": 3.885780586188048e-16
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "d02-02-stiffener-fitting-portal",
    "kind": "equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "D 조선해양 / D02 패널과 블록 조립",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "work": {
        "frameId": "head-tcp",
        "portClass": "process",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            1.6,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
