{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "d01-02-profile-cutting-line",
  "assetTypeId": "d01-02-profile-cutting-line",
  "label": "형강 프로파일 절단기",
  "category": "D 조선해양",
  "description": "입구 6.0 m 롤러 테이블과 이송 클램프 캐리지, 관찰창을 갖춘 중앙 절단 셀 엔클로저, 셀 내부 횡행·승강·베벨 회전 플라즈마 토치 갠트리, 하부 슬래그 컨베이어 및 출구 6.0 m 롤러 테이블로 구성된 조선용 형강 프로파일 절단 라인",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -7.300000095367432,
      -5.9604643443123e-10,
      -2.0550000059604647
    ],
    "max": [
      7.2,
      2.6100000005960466,
      1.2700000035762786
    ]
  },
  "size": [
    14.500000095367433,
    2.610000001192093,
    3.325000009536743
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 50,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 9,
      "blindSocketHeads": 8,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 27,
    "warnings": [],
    "changedMeshes": 67,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 76320,
      "afterTriangles": 76320,
      "reachedTarget": true,
      "changedMeshes": 0,
      "changes": [],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/d01-02-profile-cutting-line.mjs",
    "sourceSha256": "sha256:00dd6ae441d7d1bdb1fc7adfda2a2319f721341108fb528ba5f42db65978e032",
    "deliverySha256": "sha256:d6738d1c33120e6f9f796c89bf2da5d5d781d945949d284909753ae0bfb0e77d",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:ac7bd42d01ca947f8052279210a4bb1ecc0ec555c029ed4671c5a12cf6485aa0",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:ac7bd42d01ca947f8052279210a4bb1ecc0ec555c029ed4671c5a12cf6485aa0",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [],
  "parameterValues": {},
  "joints": [
    {
      "id": "feed",
      "label": "형강 이송 클램프 캐리지 주행 (X축)",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "unit": "m",
      "min": 0,
      "max": 6,
      "initial": 0
    },
    {
      "id": "torch_y",
      "label": "토치 캐리지 횡행 (Z축)",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "unit": "m",
      "min": -0.4,
      "max": 0.4,
      "initial": 0
    },
    {
      "id": "torch_z",
      "label": "토치 리프터 승강 (-Y축)",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "unit": "m",
      "min": 0,
      "max": 0.4,
      "initial": 0
    },
    {
      "id": "torch_rot",
      "label": "토치 베벨 회전 (X축)",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "unit": "rad",
      "min": -1.57,
      "max": 1.57,
      "initial": 0
    }
  ],
  "initialState": {
    "feed": 0,
    "torch_y": 0,
    "torch_z": 0,
    "torch_rot": 0
  },
  "bindings": [
    {
      "id": "feed",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-carriage",
      "gltfNode": 64
    },
    {
      "id": "torch_y",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage",
      "gltfNode": 114
    },
    {
      "id": "torch_z",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter",
      "gltfNode": 118
    },
    {
      "id": "torch_rot",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        1.2,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-bevel-head",
      "gltfNode": 123
    }
  ],
  "jointBindings": [
    {
      "id": "feed",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-carriage",
      "gltfNode": 64
    },
    {
      "id": "torch_y",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage",
      "gltfNode": 114
    },
    {
      "id": "torch_z",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "zeroPosition": [
        0,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter",
      "gltfNode": 118
    },
    {
      "id": "torch_rot",
      "kind": "revolute",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        1.2,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-bevel-head",
      "gltfNode": 123
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base",
      "nodeName": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "infeed": {
      "id": "infeed",
      "node": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/d01-02-profile-cutting-line:infeed",
      "nodeName": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/d01-02-profile-cutting-line:infeed",
      "gltfNode": 58,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -7.2,
        0.6,
        0,
        1
      ],
      "position": [
        -7.2,
        0.6,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "outfeed": {
      "id": "outfeed",
      "node": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/d01-02-profile-cutting-line:outfeed",
      "nodeName": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/d01-02-profile-cutting-line:outfeed",
      "gltfNode": 59,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        7.2,
        0.6,
        0,
        1
      ],
      "position": [
        7.2,
        0.6,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "torch-tip": {
      "id": "torch-tip",
      "node": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-bevel-head/d01-02-profile-cutting-line:torch-tip",
      "nodeName": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-bevel-head/d01-02-profile-cutting-line:torch-tip",
      "gltfNode": 128,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1,
        0,
        1
      ],
      "position": [
        0,
        1,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    }
  },
  "ports": {
    "mount": "base",
    "infeed": "infeed",
    "outfeed": "outfeed",
    "work": "torch-tip"
  },
  "nodes": [
    {
      "id": "d01-02-profile-cutting-line",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "d01-02-profile-cutting-line",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 50,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 9,
            "blindSocketHeads": 8,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 27,
          "warnings": [],
          "changedMeshes": 67,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 76320,
            "afterTriangles": 76320,
            "reachedTarget": true,
            "changedMeshes": 0,
            "changes": [],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "d01-02-profile-cutting-line",
          "coordinate_profile": "lib3d-world/1",
          "label": "형강 프로파일 절단기",
          "category": "D 조선해양 / D01 판재와 형강 가공",
          "summary": "입구 6.0 m 롤러 테이블과 이송 클램프 캐리지, 관찰창을 갖춘 중앙 절단 셀 엔클로저, 셀 내부 횡행·승강·베벨 회전 플라즈마 토치 갠트리, 하부 슬래그 컨베이어 및 출구 6.0 m 롤러 테이블로 구성된 조선용 형강 프로파일 절단 라인",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [],
          "joints": [
            {
              "id": "feed",
              "label": "형강 이송 클램프 캐리지 주행 (X축)",
              "kind": "prismatic",
              "axis": [
                1,
                0,
                0
              ],
              "unit": "m",
              "min": 0,
              "max": 6,
              "initial": 0
            },
            {
              "id": "torch_y",
              "label": "토치 캐리지 횡행 (Z축)",
              "kind": "prismatic",
              "axis": [
                0,
                0,
                1
              ],
              "unit": "m",
              "min": -0.4,
              "max": 0.4,
              "initial": 0
            },
            {
              "id": "torch_z",
              "label": "토치 리프터 승강 (-Y축)",
              "kind": "prismatic",
              "axis": [
                0,
                -1,
                0
              ],
              "unit": "m",
              "min": 0,
              "max": 0.4,
              "initial": 0
            },
            {
              "id": "torch_rot",
              "label": "토치 베벨 회전 (X축)",
              "kind": "revolute",
              "axis": [
                1,
                0,
                0
              ],
              "unit": "rad",
              "min": -1.57,
              "max": 1.57,
              "initial": 0
            }
          ],
          "ports": {
            "mount": "base",
            "infeed": "infeed",
            "outfeed": "outfeed",
            "work": "torch-tip"
          },
          "required_host_features": [
            "prismatic",
            "revolute"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "형강 프로파일 절단 라인 설계 지침(입구 롤러 테이블 6.0 m + 절단 셀 엔클로저·창 + 출구 롤러 테이블 6.0 m, 이송 클램프 캐리지, 셀 내부 토치 갠트리, 슬래그 컨베이어, 관절 feed 0..6.0·torch_y -0.4..0.4·torch_z 0..0.4·torch_rot -1.57..1.57, 프레임 base·torch-tip·infeed·outfeed)에 따른 자체 설계"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S04 Pemamek Shipbuilding",
              "url": "https://pemamek.com/welding-solutions/shipbuilding/",
              "basis": "제품군 분류 참고; 열람하지 않음"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S05 Konecranes Shipyards",
              "url": "https://www.konecranes.com/en-us/industries/shipyards",
              "basis": "제품군 분류 참고; 열람하지 않음"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S06 Wärtsilä Marine Products",
              "url": "https://www.wartsila.com/marine/products",
              "basis": "제품군 분류 참고; 열람하지 않음"
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {},
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base",
          "infeed": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/d01-02-profile-cutting-line:infeed",
          "outfeed": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/d01-02-profile-cutting-line:outfeed",
          "torch-tip": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-bevel-head/d01-02-profile-cutting-line:torch-tip"
        },
        "jointBindings": [
          {
            "id": "feed",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-carriage"
          },
          {
            "id": "torch_y",
            "kind": "prismatic",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage"
          },
          {
            "id": "torch_z",
            "kind": "prismatic",
            "axis": [
              0,
              -1,
              0
            ],
            "zeroPosition": [
              0,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter"
          },
          {
            "id": "torch_rot",
            "kind": "revolute",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              0,
              1.2,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-bevel-head"
          }
        ],
        "joints": [
          {
            "id": "feed",
            "label": "형강 이송 클램프 캐리지 주행 (X축)",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "unit": "m",
            "min": 0,
            "max": 6,
            "initial": 0,
            "value": 0
          },
          {
            "id": "torch_y",
            "label": "토치 캐리지 횡행 (Z축)",
            "kind": "prismatic",
            "axis": [
              0,
              0,
              1
            ],
            "unit": "m",
            "min": -0.4,
            "max": 0.4,
            "initial": 0,
            "value": 0
          },
          {
            "id": "torch_z",
            "label": "토치 리프터 승강 (-Y축)",
            "kind": "prismatic",
            "axis": [
              0,
              -1,
              0
            ],
            "unit": "m",
            "min": 0,
            "max": 0.4,
            "initial": 0,
            "value": 0
          },
          {
            "id": "torch_rot",
            "label": "토치 베벨 회전 (X축)",
            "kind": "revolute",
            "axis": [
              1,
              0,
              0
            ],
            "unit": "rad",
            "min": -1.57,
            "max": 1.57,
            "initial": 0,
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 44
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "형강 프로파일 절단 라인 설계 지침(입구 롤러 테이블 6.0 m + 절단 셀 엔클로저·창 + 출구 롤러 테이블 6.0 m, 이송 클램프 캐리지, 셀 내부 토치 갠트리, 슬래그 컨베이어, 관절 feed 0..6.0·torch_y -0.4..0.4·torch_z 0..0.4·torch_rot -1.57..1.57, 프레임 base·torch-tip·infeed·outfeed)에 따른 자체 설계"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S04 Pemamek Shipbuilding",
            "url": "https://pemamek.com/welding-solutions/shipbuilding/",
            "basis": "제품군 분류 참고; 열람하지 않음"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S05 Konecranes Shipyards",
            "url": "https://www.konecranes.com/en-us/industries/shipyards",
            "basis": "제품군 분류 참고; 열람하지 않음"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S06 Wärtsilä Marine Products",
            "url": "https://www.wartsila.com/marine/products",
            "basis": "제품군 분류 참고; 열람하지 않음"
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "feed": 0,
          "torch_y": 0,
          "torch_z": 0,
          "torch_rot": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base",
      "parent": "d01-02-profile-cutting-line",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line:base"
      },
      "gltfNode": 1
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -4.2,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "infeed-roller-table",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 2
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-beam-north",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.45,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-beam-north",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 3
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-beam-south",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.41,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-beam-south",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 4
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-leg-n-1",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.7,
        0.22,
        -0.42,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-leg-n-1",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.44,
            "depth": 0.09,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 5
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-leg-s-1",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.7,
        0.22,
        0.42,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-leg-s-1",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.44,
            "depth": 0.09,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 6
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-tie-1",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.7,
        0.18,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-tie-1",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.07,
            "depth": 0.88,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 7
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-leg-n-2",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.9000000000000001,
        0.22,
        -0.42,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-leg-n-2",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.44,
            "depth": 0.09,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 8
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-leg-s-2",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.9000000000000001,
        0.22,
        0.42,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-leg-s-2",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.44,
            "depth": 0.09,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 9
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-tie-2",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.9000000000000001,
        0.18,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-tie-2",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.07,
            "depth": 0.88,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 10
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-leg-n-3",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.8999999999999999,
        0.22,
        -0.42,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-leg-n-3",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.44,
            "depth": 0.09,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 11
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-leg-s-3",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.8999999999999999,
        0.22,
        0.42,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-leg-s-3",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.44,
            "depth": 0.09,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 12
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-tie-3",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.8999999999999999,
        0.18,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-tie-3",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.07,
            "depth": 0.88,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 13
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-leg-n-4",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.7,
        0.22,
        -0.42,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-leg-n-4",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.44,
            "depth": 0.09,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 14
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-leg-s-4",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.7,
        0.22,
        0.42,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-leg-s-4",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.44,
            "depth": 0.09,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 15
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-tie-4",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.7,
        0.18,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-tie-4",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.07,
            "depth": 0.88,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 16
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-1",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -2.75,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-1",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 17
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-2",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -2.2916666666666665,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-2",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 18
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-3",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.8333333333333335,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-3",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 19
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-4",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.375,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-4",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 20
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-5",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.9166666666666667,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-5",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 21
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-6",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.4583333333333335,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-6",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 22
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-7",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-7",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 23
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-8",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.4583333333333335,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-8",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 24
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-9",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.9166666666666665,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-9",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 25
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-10",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.375,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-10",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 26
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-11",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.833333333333333,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-11",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 27
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-12",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        2.291666666666667,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-12",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 28
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-13",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        2.75,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/infeed-roller-table/infeed-roller-table-roller-13",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 29
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        4.2,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "outfeed-roller-table",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 30
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-beam-north",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.45,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-beam-north",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 31
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-beam-south",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.41,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-beam-south",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 32
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-leg-n-1",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.7,
        0.22,
        -0.42,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-leg-n-1",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.44,
            "depth": 0.09,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 33
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-leg-s-1",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.7,
        0.22,
        0.42,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-leg-s-1",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.44,
            "depth": 0.09,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 34
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-tie-1",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -2.7,
        0.18,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-tie-1",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.07,
            "depth": 0.88,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 35
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-leg-n-2",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.9000000000000001,
        0.22,
        -0.42,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-leg-n-2",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.44,
            "depth": 0.09,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 36
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-leg-s-2",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.9000000000000001,
        0.22,
        0.42,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-leg-s-2",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.44,
            "depth": 0.09,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 37
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-tie-2",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.9000000000000001,
        0.18,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-tie-2",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.07,
            "depth": 0.88,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 38
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-leg-n-3",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.8999999999999999,
        0.22,
        -0.42,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-leg-n-3",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.44,
            "depth": 0.09,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 39
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-leg-s-3",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.8999999999999999,
        0.22,
        0.42,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-leg-s-3",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.44,
            "depth": 0.09,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 40
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-tie-3",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.8999999999999999,
        0.18,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-tie-3",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.07,
            "depth": 0.88,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 41
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-leg-n-4",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.7,
        0.22,
        -0.42,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-leg-n-4",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.44,
            "depth": 0.09,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 42
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-leg-s-4",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.7,
        0.22,
        0.42,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-leg-s-4",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.44,
            "depth": 0.09,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 43
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-tie-4",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        2.7,
        0.18,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-tie-4",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.07,
            "depth": 0.88,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 44
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-1",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -2.75,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-1",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 45
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-2",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -2.2916666666666665,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-2",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 46
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-3",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.8333333333333335,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-3",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 47
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-4",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -1.375,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-4",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 48
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-5",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.9166666666666667,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-5",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 49
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-6",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.4583333333333335,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-6",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 50
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-7",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-7",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 51
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-8",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.4583333333333335,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-8",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 52
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-9",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.9166666666666665,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-9",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 53
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-10",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.375,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-10",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 54
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-11",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.833333333333333,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-11",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 55
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-12",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        2.291666666666667,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-12",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 56
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-13",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        2.75,
        0.535,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/outfeed-roller-table/outfeed-roller-table-roller-13",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 57
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/d01-02-profile-cutting-line:infeed",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -7.2,
        0.6,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line:infeed"
      },
      "gltfNode": 58
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/d01-02-profile-cutting-line:outfeed",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        7.2,
        0.6,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line:outfeed"
      },
      "gltfNode": 59
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-track-system",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "feed-track-system",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 60
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-track-system/feed-guide-beam",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-track-system",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.9,
        0.42,
        -0.68,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-track-system/feed-guide-beam",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 6.8,
            "height": 0.26,
            "depth": 0.22,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 61
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-track-system/feed-guide-rail",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-track-system",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.9,
        0.57,
        -0.68,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-track-system/feed-guide-rail",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 6.8,
            "height": 0.045,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 62
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-track-system/feed-rack-bar",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-track-system",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.9,
        0.52,
        -0.555,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-track-system/feed-rack-bar",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 6.8,
            "height": 0.035,
            "depth": 0.035,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 63
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-carriage",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "feed-carriage",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 64
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-carriage/feed-carriage-saddle",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -6.8,
        0.65,
        -0.68,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-carriage/feed-carriage-saddle",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.48,
            "height": 0.18,
            "depth": 0.28,
            "radius": 0.008,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 65
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-carriage/feed-servo-motor",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -6.92,
        0.85,
        -0.68,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-carriage/feed-servo-motor",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.065,
            "topRadius": 0.065,
            "height": 0.22,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 66
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-carriage/feed-gripper-arm",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -6.8,
        0.78,
        -0.34,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-carriage/feed-gripper-arm",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.14,
            "depth": 0.76,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 67
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-carriage/feed-clamp-jaw-upper",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -6.8,
        0.76,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-carriage/feed-clamp-jaw-upper",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.2,
            "height": 0.045,
            "depth": 0.26,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 68
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-carriage/feed-clamp-jaw-lower",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -6.8,
        0.62,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-carriage/feed-clamp-jaw-lower",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.2,
            "height": 0.045,
            "depth": 0.26,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 69
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-carriage/feed-clamp-cylinder",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -6.8,
        0.88,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/feed-carriage/feed-clamp-cylinder",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.042,
            "topRadius": 0.042,
            "height": 0.18,
            "radialSegments": 48,
            "chamfer": 0.0014700000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 70
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "cutting-cell-enclosure",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 71
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-wall-west",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.2,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-wall-west",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 72
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-wall-east",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.16,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-wall-east",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 73
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-wall-front",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        1.06,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-wall-front",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 74
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-window-bezel-1",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.48,
        1.35,
        1.1,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-window-bezel-1",
        "assetId": "d01-02-profile-cutting-line"
      },
      "gltfNode": 75
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-window-bezel-2",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.48,
        1.35,
        1.1,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-window-bezel-2",
        "assetId": "d01-02-profile-cutting-line"
      },
      "gltfNode": 76
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-wall-rear",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.375,
        -1.08,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-wall-rear",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 2.32,
            "height": 1.85,
            "depth": 0.04,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 77
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-roof-panel",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.3,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-roof-panel",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 2.4,
            "height": 0.06,
            "depth": 2.2,
            "radius": 0.008,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 78
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-fume-exhaust-hood",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        2.47,
        -0.45,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-fume-exhaust-hood",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.18,
            "topRadius": 0.18,
            "height": 0.28,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 79
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-operator-panel",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.95,
        1.32,
        1.18,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-operator-panel",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.36,
            "height": 0.52,
            "depth": 0.18,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 80
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-gantry-bridge",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.92,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-gantry-bridge",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.32,
            "height": 0.24,
            "depth": 2.04,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 81
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-cross-rail",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.78,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-cross-rail",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.05,
            "depth": 1.3,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 82
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-exhaust-bolts-0",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.21,
        2.34,
        -0.45,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-exhaust-bolts-0",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.01,
            "height": 0.009000000000000001,
            "socketRadius": 0.0043,
            "socketDepth": 0.0037800000000000004,
            "chamfer": 0.00035000000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 83
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-exhaust-bolts-1",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.14849242404917498,
        2.34,
        -0.30150757595082506,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-exhaust-bolts-1",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.01,
            "height": 0.009000000000000001,
            "socketRadius": 0.0043,
            "socketDepth": 0.0037800000000000004,
            "chamfer": 0.00035000000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 84
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-exhaust-bolts-2",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.2858791391047208e-17,
        2.34,
        -0.24000000000000002,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-exhaust-bolts-2",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.01,
            "height": 0.009000000000000001,
            "socketRadius": 0.0043,
            "socketDepth": 0.0037800000000000004,
            "chamfer": 0.00035000000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 85
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-exhaust-bolts-3",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.14849242404917495,
        2.34,
        -0.301507575950825,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-exhaust-bolts-3",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.01,
            "height": 0.009000000000000001,
            "socketRadius": 0.0043,
            "socketDepth": 0.0037800000000000004,
            "chamfer": 0.00035000000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 86
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-exhaust-bolts-4",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.21,
        2.34,
        -0.45,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-exhaust-bolts-4",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.01,
            "height": 0.009000000000000001,
            "socketRadius": 0.0043,
            "socketDepth": 0.0037800000000000004,
            "chamfer": 0.00035000000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 87
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-exhaust-bolts-5",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.148492424049175,
        2.34,
        -0.5984924240491749,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-exhaust-bolts-5",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.01,
            "height": 0.009000000000000001,
            "socketRadius": 0.0043,
            "socketDepth": 0.0037800000000000004,
            "chamfer": 0.00035000000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 88
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-exhaust-bolts-6",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -3.857637417314162e-17,
        2.34,
        -0.66,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-exhaust-bolts-6",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.01,
            "height": 0.009000000000000001,
            "socketRadius": 0.0043,
            "socketDepth": 0.0037800000000000004,
            "chamfer": 0.00035000000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 89
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-exhaust-bolts-7",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.14849242404917493,
        2.34,
        -0.598492424049175,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-exhaust-bolts-7",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.01,
            "height": 0.009000000000000001,
            "socketRadius": 0.0043,
            "socketDepth": 0.0037800000000000004,
            "chamfer": 0.00035000000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 90
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-main-cable",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-main-cable",
        "assetId": "d01-02-profile-cutting-line"
      },
      "gltfNode": 91
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-main-cable-rib-2",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.6005489459212827,
        0.07625090057663207,
        -0.7959439450828739,
        0,
        0.07625090057663207,
        0.9854445249815221,
        0.1519371197081043,
        0,
        0.7959439450828739,
        -0.1519371197081043,
        0.5859934709028048,
        0,
        -0.8115485382812593,
        2.1827660510646547,
        -0.9324332344838254,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-main-cable-rib-2",
        "assetId": "d01-02-profile-cutting-line"
      },
      "gltfNode": 92
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-main-cable-rib-4",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5911267742523758,
        0.07699580791001553,
        -0.8028952499088937,
        0,
        0.07699580791001553,
        0.9855007516697235,
        0.15119495369453967,
        0,
        0.8028952499088937,
        -0.15119495369453967,
        0.5766275259220993,
        0,
        -0.7213660934282327,
        2.1657143031332335,
        -0.8671804658756959,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-main-cable-rib-4",
        "assetId": "d01-02-profile-cutting-line"
      },
      "gltfNode": 93
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-main-cable-rib-6",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.604294593828396,
        0.07594882719999928,
        -0.7931329141554513,
        0,
        0.07594882719999928,
        0.9854229326587621,
        0.15222818213835893,
        0,
        0.7931329141554513,
        -0.15222818213835893,
        0.5897175264871581,
        0,
        -0.631341010678323,
        2.148645991474184,
        -0.8017173339122894,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-main-cable-rib-6",
        "assetId": "d01-02-profile-cutting-line"
      },
      "gltfNode": 94
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-main-cable-rib-8",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.6391649268808649,
        0.07297015264109839,
        -0.7656001260899278,
        0,
        0.07297015264109839,
        0.9852435542630658,
        0.15482407954390073,
        0,
        0.7656001260899278,
        -0.15482407954390073,
        0.6244084811439308,
        0,
        -0.543361635268933,
        2.1313623513559494,
        -0.7335194783302843,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-main-cable-rib-8",
        "assetId": "d01-02-profile-cutting-line"
      },
      "gltfNode": 95
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-main-cable-rib-10",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.6929250530857547,
        0.06775362365535695,
        -0.7178191396777271,
        0,
        0.06775362365535695,
        0.9850507064657615,
        0.15838103476386417,
        0,
        0.7178191396777271,
        -0.15838103476386417,
        0.6779757595515162,
        0,
        -0.4593163124374648,
        2.1136646180469776,
        -0.6600625388663587,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-main-cable-rib-10",
        "assetId": "d01-02-profile-cutting-line"
      },
      "gltfNode": 96
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-main-cable-rib-12",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.7599164888866512,
        0.06005103645741721,
        -0.6472409156864036,
        0,
        0.06005103645741721,
        0.9849796974274193,
        0.1618915336766551,
        0,
        0.6472409156864036,
        -0.1618915336766551,
        0.7448961863140704,
        0,
        -0.37992394402616636,
        2.095065202114305,
        -0.5775020483844318,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-main-cable-rib-12",
        "assetId": "d01-02-profile-cutting-line"
      },
      "gltfNode": 97
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-main-cable-rib-14",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.8128179040218801,
        0.05282356087754894,
        -0.5801178555411767,
        0,
        0.05282356087754894,
        0.9850929728657901,
        0.16371165574465268,
        0,
        0.5801178555411767,
        -0.16371165574465268,
        0.7979108768876703,
        0,
        -0.3040573261242324,
        2.0748589140117666,
        -0.4815780024078266,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-main-cable-rib-14",
        "assetId": "d01-02-profile-cutting-line"
      },
      "gltfNode": 98
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-main-cable-rib-16",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.843883257978659,
        0.047985620219230994,
        -0.5343766716048705,
        0,
        0.047985620219230994,
        0.9852506546190318,
        0.16425141650818437,
        0,
        0.5343766716048705,
        -0.16425141650818437,
        0.8291339125976909,
        0,
        -0.2336933396541159,
        2.054073426175131,
        -0.37829797943344995,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-main-cable-rib-16",
        "assetId": "d01-02-profile-cutting-line"
      },
      "gltfNode": 99
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-main-cable-rib-18",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.8585671993305763,
        0.04551215956996105,
        -0.5106770090428282,
        0,
        0.04551215956996105,
        0.9853544817120389,
        0.16433255520826526,
        0,
        0.5106770090428282,
        -0.16433255520826526,
        0.8439216810426153,
        0,
        -0.16670193373898406,
        2.0329329449530813,
        -0.2705094544281808,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-main-cable-rib-18",
        "assetId": "d01-02-profile-cutting-line"
      },
      "gltfNode": 100
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-main-cable-rib-20",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.8596558099309843,
        0.045323440044991545,
        -0.5088591890045727,
        0,
        0.045323440044991545,
        0.9853630263105173,
        0.1643334785205585,
        0,
        0.5088591890045727,
        -0.1643334785205585,
        0.8450188362415015,
        0,
        -0.10095305750200467,
        2.0116616766942994,
        -0.16105990235889883,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cell-main-cable-rib-20",
        "assetId": "d01-02-profile-cutting-line"
      },
      "gltfNode": 101
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.164,
        1.92,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "cutting-line-badge",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 102
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        -1,
        0,
        0,
        1,
        0,
        0,
        1,
        0,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "badge-orient",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 103
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient/badge-bezel",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient/badge-bezel",
        "assetId": "d01-02-profile-cutting-line",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 104
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient/badge-backing",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient/badge-backing",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 105
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient/badge-rivet-0",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.1669,
        -0.046900000000000004,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient/badge-rivet-0",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 106
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient/badge-rivet-1",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.1669,
        0.046900000000000004,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient/badge-rivet-1",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 107
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient/badge-rivet-2",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.1669,
        -0.046900000000000004,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient/badge-rivet-2",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 108
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient/badge-rivet-3",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.1669,
        0.046900000000000004,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient/badge-rivet-3",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 109
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient/badge-D",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.08120000000000001,
        0,
        0,
        0,
        0,
        0.08120000000000001,
        0,
        0,
        0,
        0,
        0.0027,
        0,
        -0.035728,
        0,
        0.002595,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient/badge-D",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 110
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient/badge-S",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.08120000000000001,
        0,
        0,
        0,
        0,
        0.08120000000000001,
        0,
        0,
        0,
        0,
        0.0027,
        0,
        0.035728,
        0,
        0.002595,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient/badge-S",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 111
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient/badge-D-back",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.08120000000000001,
        0,
        -9.94413200907651e-18,
        0,
        0,
        0.08120000000000001,
        0,
        0,
        3.3065463576978538e-19,
        0,
        -0.0027,
        0,
        0.035728,
        0,
        -0.002595,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient/badge-D-back",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 112
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient/badge-S-back",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.08120000000000001,
        0,
        -9.94413200907651e-18,
        0,
        0,
        0.08120000000000001,
        0,
        0,
        3.3065463576978538e-19,
        0,
        -0.0027,
        0,
        -0.035728,
        0,
        -0.002595,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/cutting-cell-enclosure/cutting-line-badge/badge-orient/badge-S-back",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 113
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "torch-y-carriage",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 114
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-y-slider-block",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.74,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-y-slider-block",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.24,
            "height": 0.14,
            "depth": 0.28,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 115
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-y-servo-motor",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.14,
        1.82,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-y-servo-motor",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.05,
            "topRadius": 0.05,
            "height": 0.16,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 116
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-guide-rail",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.48,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-guide-rail",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.06,
            "height": 0.6,
            "depth": 0.08,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 117
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "torch-z-lifter",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 118
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-z-slide-carriage",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.36,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-z-slide-carriage",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.22,
            "depth": 0.18,
            "radius": 0.005,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 119
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-z-servo-motor",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.56,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-z-servo-motor",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.045,
            "topRadius": 0.045,
            "height": 0.15,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 120
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/bevel-pivot-yoke",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.06,
        1.2,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/bevel-pivot-yoke",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.18,
            "height": 0.14,
            "depth": 0.14,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 121
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/bevel-rotary-actuator",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.16,
        1.2,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/bevel-rotary-actuator",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.055,
            "topRadius": 0.055,
            "height": 0.14,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 122
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-bevel-head",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.2,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "torch-bevel-head",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 123
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-bevel-head/bevel-spindle-hub",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-bevel-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-bevel-head/bevel-spindle-hub",
        "assetId": "d01-02-profile-cutting-line"
      },
      "gltfNode": 124
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-bevel-head/torch-holder-block",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-bevel-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.05,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-bevel-head/torch-holder-block",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.09,
            "height": 0.08,
            "depth": 0.09,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 125
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-bevel-head/plasma-torch-body",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-bevel-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.11,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-bevel-head/plasma-torch-body",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.026,
            "topRadius": 0.026,
            "height": 0.1,
            "radialSegments": 48,
            "chamfer": 0.00091
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 126
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-bevel-head/plasma-torch-nozzle",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-bevel-head",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.175,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-bevel-head/plasma-torch-nozzle",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.01,
            "topRadius": 0.022,
            "height": 0.05,
            "radialSegments": 48,
            "chamfer": 0.00035000000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 127
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-bevel-head/d01-02-profile-cutting-line:torch-tip",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/torch-y-carriage/torch-z-lifter/torch-bevel-head",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.2,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line:torch-tip"
      },
      "gltfNode": 128
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "slag-conveyor",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 129
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor/slag-trough-body",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.14,
        -0.3,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor/slag-trough-body",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.6,
            "height": 0.28,
            "depth": 2.3,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 130
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor/slag-scraper-belt",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.29,
        -0.3,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor/slag-scraper-belt",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.44,
            "height": 0.04,
            "depth": 2.16,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 131
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor/slag-drive-motor",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.92,
        0.24,
        -1.35,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor/slag-drive-motor",
        "assetId": "d01-02-profile-cutting-line",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.065,
            "topRadius": 0.065,
            "height": 0.22,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 132
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor/slag-collection-bin",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.21,
        -1.78,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor/slag-collection-bin",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.5,
            "height": 0.42,
            "depth": 0.55,
            "radius": 0.008,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 133
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor/slag-cleat-1",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.32,
        -1.25,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor/slag-cleat-1",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.4,
            "height": 0.025,
            "depth": 0.03,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 134
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor/slag-cleat-2",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.32,
        -0.87,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor/slag-cleat-2",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.4,
            "height": 0.025,
            "depth": 0.03,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 135
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor/slag-cleat-3",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.32,
        -0.49,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor/slag-cleat-3",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.4,
            "height": 0.025,
            "depth": 0.03,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 136
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor/slag-cleat-4",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.32,
        -0.10999999999999988,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor/slag-cleat-4",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.4,
            "height": 0.025,
            "depth": 0.03,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 137
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor/slag-cleat-5",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.32,
        0.27,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor/slag-cleat-5",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.4,
            "height": 0.025,
            "depth": 0.03,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 138
    },
    {
      "id": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor/slag-cleat-6",
      "parent": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.32,
        0.6499999999999999,
        1
      ],
      "sourceUserData": {
        "partId": "d01-02-profile-cutting-line/d01-02-profile-cutting-line:base/slag-conveyor/slag-cleat-6",
        "assetId": "d01-02-profile-cutting-line",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.4,
            "height": 0.025,
            "depth": 0.03,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 139
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "형강 프로파일 절단 라인 설계 지침(입구 롤러 테이블 6.0 m + 절단 셀 엔클로저·창 + 출구 롤러 테이블 6.0 m, 이송 클램프 캐리지, 셀 내부 토치 갠트리, 슬래그 컨베이어, 관절 feed 0..6.0·torch_y -0.4..0.4·torch_z 0..0.4·torch_rot -1.57..1.57, 프레임 base·torch-tip·infeed·outfeed)에 따른 자체 설계"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S04 Pemamek Shipbuilding",
      "url": "https://pemamek.com/welding-solutions/shipbuilding/",
      "basis": "제품군 분류 참고; 열람하지 않음"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S05 Konecranes Shipyards",
      "url": "https://www.konecranes.com/en-us/industries/shipyards",
      "basis": "제품군 분류 참고; 열람하지 않음"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S06 Wärtsilä Marine Products",
      "url": "https://www.wartsila.com/marine/products",
      "basis": "제품군 분류 참고; 열람하지 않음"
    }
  ],
  "rights": {
    "id": "d01-02-profile-cutting-line",
    "assetTypeId": "d01-02-profile-cutting-line",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:00dd6ae441d7d1bdb1fc7adfda2a2319f721341108fb528ba5f42db65978e032",
    "modelSource": "kit/models/d01-02-profile-cutting-line.mjs",
    "dslExampleSource": "dsl/models/d01-02-profile-cutting-line.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/d01-02-profile-cutting-line.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/d01-02-profile-cutting-line.txt",
      "sha256": "sha256:b51fdb7e95d3cdd79ce3158e923d7eb68ff0c4157fd2d7d845b8933e96861ba6",
      "bytes": 809
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/d01-02-profile-cutting-line/model.glb",
      "bytes": 1097296,
      "sha256": "sha256:c958b0393689db6e06f0225cf0465bff04ad39d2133de7a845a0987304afefb0"
    },
    "licenses": [
      {
        "path": "open-assets/d01-02-profile-cutting-line/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/d01-02-profile-cutting-line/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/d01-02-profile-cutting-line/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/d01-02-profile-cutting-line/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/d01-02-profile-cutting-line/LICENSES/ASSET-NOTICES/d01-02-profile-cutting-line.txt",
        "bytes": 809,
        "sha256": "sha256:b51fdb7e95d3cdd79ce3158e923d7eb68ff0c4157fd2d7d845b8933e96861ba6"
      }
    ],
    "source": {
      "path": "kit/models/d01-02-profile-cutting-line.mjs",
      "bytes": 22856,
      "sha256": "sha256:d6738d1c33120e6f9f796c89bf2da5d5d781d945949d284909753ae0bfb0e77d"
    },
    "ds2": {
      "path": "dsl/models/d01-02-profile-cutting-line.ds2",
      "bytes": 4335,
      "sha256": "sha256:35ab37451fc6eeeb78c45b547e595d034170946c1e4170010e7940b14de5d63f",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 140,
    "triangles": 76320,
    "maxMatrixError": 2.220446049250313e-16,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 16,
    "nodeComparisons": 2240,
    "semanticFrameComparisons": 64,
    "acceptanceCases": 5,
    "acceptanceFrameComparisons": 20,
    "maxMotionMatrixError": 2.220446049250313e-16
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "d01-02-profile-cutting-line",
    "kind": "process-equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "D 조선해양 / D01 판재와 형강 가공",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "infeed": {
        "frameId": "infeed",
        "portClass": "material-flow",
        "direction": "input",
        "quaternion": [
          0,
          1,
          0,
          0
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -7.2,
            0.6,
            0
          ],
          "quaternion": [
            0,
            1,
            0,
            0
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "outfeed": {
        "frameId": "outfeed",
        "portClass": "material-flow",
        "direction": "output",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            7.2,
            0.6,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "work": {
        "frameId": "torch-tip",
        "portClass": "process",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            1,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
