{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "c04-06-hydraulic-power-unit",
  "assetTypeId": "c04-06-hydraulic-power-unit",
  "label": "유압 파워 유닛",
  "category": "C 유체 배관과 유틸리티",
  "description": "1.10×0.08×0.76 m 드립팬 스키드 위 0.96×0.52×0.64 m 사각 유압 오일 탱크, 통풍 슬롯이 관통된 Ø0.24×0.38 m 수직 벨하우징 모터-펌프 그룹(냉각팬 관절 pump_shaft), 3스테이션 솔레노이드 매니폴드와 릴리프 밸브 조절 핸들(관절 pressure_set), Ø0.068 m 압력계(M.lens), 블래더 어큐뮬레이터, 공랭 오일 쿨러 및 P/T 포트 플랜지를 갖춘 산업용 유압 파워 유닛(HPU) 조립 템플릿입니다.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -0.550000011920929,
      -2.32682895373737e-17,
      -0.3799999952316284
    ],
    "max": [
      0.550000011920929,
      1.1400000001043082,
      0.3799999952316284
    ]
  },
  "size": [
    1.100000023841858,
    1.1400000001043082,
    0.7599999904632568
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 23,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 24,
      "blindSocketHeads": 8,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 8,
    "warnings": [],
    "changedMeshes": 55,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 82452,
      "afterTriangles": 78420,
      "reachedTarget": true,
      "changedMeshes": 6,
      "changes": [
        {
          "meshes": [
            "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-1",
            "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-2",
            "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-3",
            "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-4",
            "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-5",
            "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-6"
          ],
          "radiusM": 0.001,
          "dimensionsM": [
            0.068,
            0.006,
            0.028
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        }
      ],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/c04-06-hydraulic-power-unit.mjs",
    "sourceSha256": "sha256:5775ed287f0763e964b9cc8bd427c54d965d345d425b6ab9ea8b54a204d05188",
    "deliverySha256": "sha256:3b4d55c2f8f9eb6824f91e5840237927860a250cbd618fe45f2e154b277d31ff",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:f5cb484e9ceff61bef34a9f717ecb0690060792e81cdfcab653f0aef3a27cf53",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:f5cb484e9ceff61bef34a9f717ecb0690060792e81cdfcab653f0aef3a27cf53",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [],
  "parameterValues": {},
  "joints": [
    {
      "id": "pump_shaft",
      "label": "모터-펌프 냉각팬 회전",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "unit": "rad",
      "min": -6.283185307179586,
      "max": 6.283185307179586,
      "initial": 0
    },
    {
      "id": "pressure_set",
      "label": "릴리프 밸브 압력 조절 핸들",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "unit": "rad",
      "min": 0,
      "max": 6.283185307179586,
      "initial": 0
    }
  ],
  "initialState": {
    "pump_shaft": 0,
    "pressure_set": 0
  },
  "bindings": [
    {
      "id": "pump_shaft",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0.24,
        1.09,
        0.06
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group",
      "gltfNode": 47
    },
    {
      "id": "pressure_set",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -0.24,
        0.78,
        0.23
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/relief-valve-knob-group",
      "gltfNode": 78
    }
  ],
  "jointBindings": [
    {
      "id": "pump_shaft",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0.24,
        1.09,
        0.06
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group",
      "gltfNode": 47
    },
    {
      "id": "pressure_set",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        -0.24,
        0.78,
        0.23
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/relief-valve-knob-group",
      "gltfNode": 78
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base",
      "nodeName": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "port-p": {
      "id": "port-p",
      "node": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/c04-06-hydraulic-power-unit:port-p",
      "nodeName": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/c04-06-hydraulic-power-unit:port-p",
      "gltfNode": 134,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.48,
        0.74,
        0.12,
        1
      ],
      "position": [
        -0.48,
        0.74,
        0.12
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "port-t": {
      "id": "port-t",
      "node": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/c04-06-hydraulic-power-unit:port-t",
      "nodeName": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/c04-06-hydraulic-power-unit:port-t",
      "gltfNode": 135,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.48,
        0.74,
        -0.12,
        1
      ],
      "position": [
        -0.48,
        0.74,
        -0.12
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "gauge-face": {
      "id": "gauge-face",
      "node": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/c04-06-hydraulic-power-unit:gauge-face",
      "nodeName": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/c04-06-hydraulic-power-unit:gauge-face",
      "gltfNode": 136,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.12,
        0.94,
        0.21,
        1
      ],
      "position": [
        -0.12,
        0.94,
        0.21
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "motor-top": {
      "id": "motor-top",
      "node": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/c04-06-hydraulic-power-unit:motor-top",
      "nodeName": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/c04-06-hydraulic-power-unit:motor-top",
      "gltfNode": 137,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.24,
        1.14,
        0.06,
        1
      ],
      "position": [
        0.24,
        1.14,
        0.06
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    }
  },
  "ports": {
    "mount": "base",
    "supply": "port-p",
    "return": "port-t",
    "work": "port-p"
  },
  "nodes": [
    {
      "id": "c04-06-hydraulic-power-unit",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "c04-06-hydraulic-power-unit",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 23,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 24,
            "blindSocketHeads": 8,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 8,
          "warnings": [],
          "changedMeshes": 55,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 82452,
            "afterTriangles": 78420,
            "reachedTarget": true,
            "changedMeshes": 6,
            "changes": [
              {
                "meshes": [
                  "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-1",
                  "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-2",
                  "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-3",
                  "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-4",
                  "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-5",
                  "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-6"
                ],
                "radiusM": 0.001,
                "dimensionsM": [
                  0.068,
                  0.006,
                  0.028
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              }
            ],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "c04-06-hydraulic-power-unit",
          "coordinate_profile": "lib3d-world/1",
          "label": "유압 파워 유닛",
          "category": "C 유체 배관과 유틸리티 / C04 공압과 유압 공급",
          "summary": "1.10×0.08×0.76 m 드립팬 스키드 위 0.96×0.52×0.64 m 사각 유압 오일 탱크, 통풍 슬롯이 관통된 Ø0.24×0.38 m 수직 벨하우징 모터-펌프 그룹(냉각팬 관절 pump_shaft), 3스테이션 솔레노이드 매니폴드와 릴리프 밸브 조절 핸들(관절 pressure_set), Ø0.068 m 압력계(M.lens), 블래더 어큐뮬레이터, 공랭 오일 쿨러 및 P/T 포트 플랜지를 갖춘 산업용 유압 파워 유닛(HPU) 조립 템플릿입니다.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [],
          "joints": [
            {
              "id": "pump_shaft",
              "label": "모터-펌프 냉각팬 회전",
              "kind": "revolute",
              "axis": [
                0,
                1,
                0
              ],
              "unit": "rad",
              "min": -6.283185307179586,
              "max": 6.283185307179586,
              "initial": 0
            },
            {
              "id": "pressure_set",
              "label": "릴리프 밸브 압력 조절 핸들",
              "kind": "revolute",
              "axis": [
                0,
                0,
                1
              ],
              "unit": "rad",
              "min": 0,
              "max": 6.283185307179586,
              "initial": 0
            }
          ],
          "ports": {
            "mount": "base",
            "supply": "port-p",
            "return": "port-t",
            "work": "port-p"
          },
          "required_host_features": [
            "revolute"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "산업용 유압 파워 유닛 설계 지침(스키드 1.10×0.08×0.76 m 포크 포켓 및 4코너 Ø0.016 앵커 구멍 관통, 오일 탱크 0.96×0.52×0.64 m 사이트 글라스 lens 및 청소 커버 볼트 8개, 수직 모터 Ø0.24×0.38 m 팬 커버 통풍 슬롯 관통 및 pump_shaft 회전, 3스테이션 매니폴드 및 pressure_set 핸들 회전, Ø0.068 압력계 lens, 어큐뮬레이터, 공랭 쿨러, P/T 포트 플랜지)에 따른 자체 설계"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S01 Festo 제품군",
              "url": "https://www.festo.com/us/en",
              "basis": "제품군 분류 참고; 열람하지 않음"
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S03 Sulzer Our products",
              "url": "https://www.sulzer.com/en/products",
              "basis": "제품군 분류 참고; 열람하지 않음"
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {},
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base",
          "port-p": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/c04-06-hydraulic-power-unit:port-p",
          "port-t": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/c04-06-hydraulic-power-unit:port-t",
          "gauge-face": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/c04-06-hydraulic-power-unit:gauge-face",
          "motor-top": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/c04-06-hydraulic-power-unit:motor-top"
        },
        "jointBindings": [
          {
            "id": "pump_shaft",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0.24,
              1.09,
              0.06
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group"
          },
          {
            "id": "pressure_set",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              -0.24,
              0.78,
              0.23
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/relief-valve-knob-group"
          }
        ],
        "joints": [
          {
            "id": "pump_shaft",
            "label": "모터-펌프 냉각팬 회전",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "unit": "rad",
            "min": -6.283185307179586,
            "max": 6.283185307179586,
            "initial": 0,
            "value": 0
          },
          {
            "id": "pressure_set",
            "label": "릴리프 밸브 압력 조절 핸들",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "unit": "rad",
            "min": 0,
            "max": 6.283185307179586,
            "initial": 0,
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 54
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "산업용 유압 파워 유닛 설계 지침(스키드 1.10×0.08×0.76 m 포크 포켓 및 4코너 Ø0.016 앵커 구멍 관통, 오일 탱크 0.96×0.52×0.64 m 사이트 글라스 lens 및 청소 커버 볼트 8개, 수직 모터 Ø0.24×0.38 m 팬 커버 통풍 슬롯 관통 및 pump_shaft 회전, 3스테이션 매니폴드 및 pressure_set 핸들 회전, Ø0.068 압력계 lens, 어큐뮬레이터, 공랭 쿨러, P/T 포트 플랜지)에 따른 자체 설계"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S01 Festo 제품군",
            "url": "https://www.festo.com/us/en",
            "basis": "제품군 분류 참고; 열람하지 않음"
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S03 Sulzer Our products",
            "url": "https://www.sulzer.com/en/products",
            "basis": "제품군 분류 참고; 열람하지 않음"
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "pump_shaft": 0,
          "pressure_set": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base",
      "parent": "c04-06-hydraulic-power-unit",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit:base",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 1
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/skid-drip-pan-group",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "skid-drip-pan-group",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 2
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/skid-drip-pan-group/skid-main-frame",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/skid-drip-pan-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/skid-drip-pan-group/skid-main-frame",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "frame",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 3
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/skid-drip-pan-group/skid-anchor-rim-plate",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/skid-drip-pan-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/skid-drip-pan-group/skid-anchor-rim-plate",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "fastener",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 4
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "oil-reservoir-group",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 5
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/oil-tank-body",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.33,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/oil-tank-body",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.96,
            "height": 0.5,
            "depth": 0.64,
            "radius": 0.008,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 6
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/oil-tank-top-deck",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.59,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/oil-tank-top-deck",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.98,
            "height": 0.02,
            "depth": 0.66,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 7
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/level-sight-glass-housing",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.3,
        0.36,
        0.326,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/level-sight-glass-housing",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "sensor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.044,
            "height": 0.18,
            "depth": 0.016,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 8
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/level-sight-glass-lens",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.3,
        0.36,
        0.334,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/level-sight-glass-lens",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "sensor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.145,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 9
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/tank-drain-plug",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.38,
        0.13,
        0.326,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/tank-drain-plug",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "port",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.018,
            "topRadius": 0.018,
            "height": 0.024,
            "radialSegments": 48,
            "chamfer": 0.00063
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 10
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.14,
        0.36,
        0.324,
        1
      ],
      "sourceUserData": {
        "partId": "DS_Brand_Plate",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 11
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate/badge-bezel",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate/badge-bezel",
        "assetId": "c04-06-hydraulic-power-unit",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 12
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate/badge-backing",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate/badge-backing",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 13
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate/badge-rivet-0",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.0968,
        -0.026799999999999997,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate/badge-rivet-0",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 14
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate/badge-rivet-1",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.0968,
        0.026799999999999997,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate/badge-rivet-1",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 15
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate/badge-rivet-2",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.0968,
        -0.026799999999999997,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate/badge-rivet-2",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 16
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate/badge-rivet-3",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.0968,
        0.026799999999999997,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate/badge-rivet-3",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 17
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate/badge-D",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.0464,
        0,
        0,
        0,
        0,
        0.0464,
        0,
        0,
        0,
        0,
        0.0027,
        0,
        -0.020416,
        0,
        0.002595,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate/badge-D",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 18
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate/badge-S",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.0464,
        0,
        0,
        0,
        0,
        0.0464,
        0,
        0,
        0,
        0,
        0.0027,
        0,
        0.020416,
        0,
        0.002595,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate/badge-S",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 19
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate/badge-D-back",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.0464,
        0,
        -5.6823611480437185e-18,
        0,
        0,
        0.0464,
        0,
        0,
        3.3065463576978538e-19,
        0,
        -0.0027,
        0,
        0.020416,
        0,
        -0.002595,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate/badge-D-back",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 20
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate/badge-S-back",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.0464,
        0,
        -5.6823611480437185e-18,
        0,
        0,
        0.0464,
        0,
        0,
        3.3065463576978538e-19,
        0,
        -0.0027,
        0,
        -0.020416,
        0,
        -0.002595,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/DS_Brand_Plate/badge-S-back",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 21
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/inspection-cleanout-cover",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.486,
        0.33,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/inspection-cleanout-cover",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.135,
            "topRadius": 0.135,
            "height": 0.018,
            "radialSegments": 48,
            "chamfer": 0.0007199999999999999
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 22
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/cleanout-cover-bolt-0",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.496,
        0.442,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/cleanout-cover-bolt-0",
        "assetId": "c04-06-hydraulic-power-unit",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 23
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/cleanout-cover-bolt-1",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.496,
        0.40919595949289334,
        0.07919595949289332,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/cleanout-cover-bolt-1",
        "assetId": "c04-06-hydraulic-power-unit",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 24
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/cleanout-cover-bolt-2",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.496,
        0.33,
        0.112,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/cleanout-cover-bolt-2",
        "assetId": "c04-06-hydraulic-power-unit",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 25
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/cleanout-cover-bolt-3",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.496,
        0.2508040405071067,
        0.07919595949289333,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/cleanout-cover-bolt-3",
        "assetId": "c04-06-hydraulic-power-unit",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 26
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/cleanout-cover-bolt-4",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.496,
        0.21800000000000003,
        1.3716044150450356e-17,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/cleanout-cover-bolt-4",
        "assetId": "c04-06-hydraulic-power-unit",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 27
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/cleanout-cover-bolt-5",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.496,
        0.2508040405071067,
        -0.07919595949289332,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/cleanout-cover-bolt-5",
        "assetId": "c04-06-hydraulic-power-unit",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 28
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/cleanout-cover-bolt-6",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.496,
        0.33,
        -0.112,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/cleanout-cover-bolt-6",
        "assetId": "c04-06-hydraulic-power-unit",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 29
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/cleanout-cover-bolt-7",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        -1,
        0,
        0,
        1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.496,
        0.40919595949289334,
        -0.07919595949289335,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/cleanout-cover-bolt-7",
        "assetId": "c04-06-hydraulic-power-unit",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.008,
            "height": 0.007200000000000001,
            "socketRadius": 0.00344,
            "socketDepth": 0.003024,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 30
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/filler-breather-neck",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.02,
        0.622,
        0.21,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/filler-breather-neck",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.024,
            "topRadius": 0.024,
            "height": 0.045,
            "radialSegments": 48,
            "chamfer": 0.0008400000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 31
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/filler-breather-cap",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.02,
        0.655,
        0.21,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/filler-breather-cap",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.042,
            "topRadius": 0.042,
            "height": 0.032,
            "radialSegments": 48,
            "chamfer": 0.00128
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 32
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/return-filter-bowl",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.03,
        0.69,
        -0.14,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/return-filter-bowl",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.058,
            "topRadius": 0.058,
            "height": 0.18,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 33
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/return-filter-head",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.03,
        0.79,
        -0.14,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/oil-reservoir-group/return-filter-head",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.066,
            "topRadius": 0.066,
            "height": 0.048,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 34
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.24,
        0.6,
        0.06,
        1
      ],
      "sourceUserData": {
        "partId": "motor-pump-group",
        "componentRole": "motor",
        "BOMqty": 1
      },
      "gltfNode": 35
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group/bellhousing-flange",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.012,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group/bellhousing-flange",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 36
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group/pump-bellhousing",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group/pump-bellhousing",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 37
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group/iec-motor-stator",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.344,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group/iec-motor-stator",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.114,
            "topRadius": 0.114,
            "height": 0.368,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 38
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group/motor-terminal-box",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.132,
        0.34,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group/motor-terminal-box",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.095,
            "height": 0.105,
            "depth": 0.085,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 39
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group/motor-cooling-ring-1",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.21,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group/motor-cooling-ring-1",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.12,
            "topRadius": 0.12,
            "height": 0.01,
            "radialSegments": 48,
            "chamfer": 0.0004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 40
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group/motor-cooling-ring-2",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.258,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group/motor-cooling-ring-2",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.12,
            "topRadius": 0.12,
            "height": 0.01,
            "radialSegments": 48,
            "chamfer": 0.0004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 41
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group/motor-cooling-ring-3",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.306,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group/motor-cooling-ring-3",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.12,
            "topRadius": 0.12,
            "height": 0.01,
            "radialSegments": 48,
            "chamfer": 0.0004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 42
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group/motor-cooling-ring-4",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.354,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group/motor-cooling-ring-4",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.12,
            "topRadius": 0.12,
            "height": 0.01,
            "radialSegments": 48,
            "chamfer": 0.0004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 43
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group/motor-cooling-ring-5",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.402,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group/motor-cooling-ring-5",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.12,
            "topRadius": 0.12,
            "height": 0.01,
            "radialSegments": 48,
            "chamfer": 0.0004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 44
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group/motor-cooling-ring-6",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.44999999999999996,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group/motor-cooling-ring-6",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.12,
            "topRadius": 0.12,
            "height": 0.01,
            "radialSegments": 48,
            "chamfer": 0.0004
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 45
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group/motor-fan-cover-grille",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.528,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/motor-pump-group/motor-fan-cover-grille",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "motor",
        "BOMqty": 1
      },
      "gltfNode": 46
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.24,
        1.09,
        0.06,
        1
      ],
      "sourceUserData": {
        "partId": "pump-cooling-fan-group",
        "componentRole": "motor",
        "BOMqty": 1
      },
      "gltfNode": 47
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-rotor-hub",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-rotor-hub",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 48
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-1",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        0.955336489125606,
        0.29552020666133955,
        0,
        0,
        -0.29552020666133955,
        0.955336489125606,
        0,
        0.068,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-1",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.068,
            "height": 0.006,
            "depth": 0.028,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 49
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-2",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5000000000000002,
        0.2559280063003473,
        -0.8273456687450108,
        0,
        2.7755575615628914e-17,
        0.955336489125606,
        0.29552020666133955,
        0,
        0.8660254037844385,
        -0.1477601033306698,
        0.4776682445628032,
        0,
        0.03400000000000001,
        0,
        -0.05888972745734183,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-2",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.068,
            "height": 0.006,
            "depth": 0.028,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 50
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-3",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.49999999999999956,
        0.25592800630034734,
        -0.8273456687450109,
        0,
        0,
        0.955336489125606,
        0.29552020666133955,
        0,
        0.8660254037844386,
        0.1477601033306697,
        -0.47766824456280266,
        0,
        -0.03399999999999999,
        0,
        -0.058889727457341834,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-3",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.068,
            "height": 0.006,
            "depth": 0.028,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 51
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-4",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.9999999999999998,
        3.6190787517117384e-17,
        -1.1699497735163436e-16,
        0,
        0,
        0.955336489125606,
        0.29552020666133955,
        0,
        1.2246467991473532e-16,
        0.29552020666133955,
        -0.9553364891256058,
        0,
        -0.068,
        0,
        -8.327598234202002e-18,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-4",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.068,
            "height": 0.006,
            "depth": 0.028,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 52
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-5",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.5,
        -0.25592800630034723,
        0.8273456687450105,
        0,
        0,
        0.955336489125606,
        0.2955202066613395,
        0,
        -0.8660254037844382,
        0.14776010333066986,
        -0.4776682445628031,
        0,
        -0.03400000000000003,
        0,
        0.05888972745734182,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-5",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.068,
            "height": 0.006,
            "depth": 0.028,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 53
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-6",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5000000000000002,
        -0.2559280063003473,
        0.8273456687450108,
        0,
        -2.7755575615628914e-17,
        0.955336489125606,
        0.29552020666133955,
        0,
        -0.8660254037844385,
        -0.1477601033306698,
        0.4776682445628032,
        0,
        0.03400000000000001,
        0,
        0.05888972745734183,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/pump-cooling-fan-group/pump-fan-blade-6",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.068,
            "height": 0.006,
            "depth": 0.028,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 54
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "manifold-valve-group",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 55
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/manifold-stand-bracket",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.24,
        0.64,
        0.04,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/manifold-stand-bracket",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.08,
            "depth": 0.28,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 56
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/hydraulic-manifold-block",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.24,
        0.75,
        0.04,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/hydraulic-manifold-block",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.22,
            "height": 0.14,
            "depth": 0.34,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 57
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/directional-valve-body-1",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.24,
        0.854,
        -0.06,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/directional-valve-body-1",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.068,
            "depth": 0.064,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 58
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/solenoid-coil-A-1",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.326,
        0.854,
        -0.06,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/solenoid-coil-A-1",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.024,
            "topRadius": 0.024,
            "height": 0.062,
            "radialSegments": 48,
            "chamfer": 0.0008400000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 59
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/solenoid-coil-B-1",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.154,
        0.854,
        -0.06,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/solenoid-coil-B-1",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.024,
            "topRadius": 0.024,
            "height": 0.062,
            "radialSegments": 48,
            "chamfer": 0.0008400000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 60
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/din-connector-1",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.326,
        0.892,
        -0.06,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/din-connector-1",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "sensor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.028,
            "height": 0.032,
            "depth": 0.028,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 61
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/directional-valve-body-2",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.24,
        0.854,
        0.04,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/directional-valve-body-2",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.068,
            "depth": 0.064,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 62
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/solenoid-coil-A-2",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.326,
        0.854,
        0.04,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/solenoid-coil-A-2",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.024,
            "topRadius": 0.024,
            "height": 0.062,
            "radialSegments": 48,
            "chamfer": 0.0008400000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 63
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/solenoid-coil-B-2",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.154,
        0.854,
        0.04,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/solenoid-coil-B-2",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.024,
            "topRadius": 0.024,
            "height": 0.062,
            "radialSegments": 48,
            "chamfer": 0.0008400000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 64
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/din-connector-2",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.326,
        0.892,
        0.04,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/din-connector-2",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "sensor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.028,
            "height": 0.032,
            "depth": 0.028,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 65
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/directional-valve-body-3",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.24,
        0.854,
        0.14,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/directional-valve-body-3",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.068,
            "depth": 0.064,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 66
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/solenoid-coil-A-3",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.326,
        0.854,
        0.14,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/solenoid-coil-A-3",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.024,
            "topRadius": 0.024,
            "height": 0.062,
            "radialSegments": 48,
            "chamfer": 0.0008400000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 67
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/solenoid-coil-B-3",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.154,
        0.854,
        0.14,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/solenoid-coil-B-3",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.024,
            "topRadius": 0.024,
            "height": 0.062,
            "radialSegments": 48,
            "chamfer": 0.0008400000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 68
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/din-connector-3",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.326,
        0.892,
        0.14,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/din-connector-3",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "sensor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.028,
            "height": 0.032,
            "depth": 0.028,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 69
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/relief-valve-cartridge",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.24,
        0.78,
        0.218,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/relief-valve-cartridge",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.024,
            "topRadius": 0.024,
            "height": 0.04,
            "radialSegments": 48,
            "chamfer": 0.0008400000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 70
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/pressure-gauge-stem",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.12,
        0.88,
        0.194,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/pressure-gauge-stem",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "sensor",
        "BOMqty": 1
      },
      "gltfNode": 71
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/pressure-gauge-case",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.12,
        0.94,
        0.194,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/pressure-gauge-case",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "sensor",
        "BOMqty": 1
      },
      "gltfNode": 72
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/pressure-gauge-dial",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.12,
        0.94,
        0.207,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/pressure-gauge-dial",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "sensor",
        "BOMqty": 1
      },
      "gltfNode": 73
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/pressure-gauge-lens",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.12,
        0.94,
        0.21,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/pressure-gauge-lens",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "sensor",
        "BOMqty": 1
      },
      "gltfNode": 74
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/port-p-flange",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.48,
        0.74,
        0.12,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/port-p-flange",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "port",
        "BOMqty": 1
      },
      "gltfNode": 75
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/port-t-flange",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.48,
        0.74,
        -0.12,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/port-t-flange",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "port",
        "BOMqty": 1
      },
      "gltfNode": 76
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/port-bulkhead-bracket",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.454,
        0.7,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/manifold-valve-group/port-bulkhead-bracket",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.016,
            "height": 0.22,
            "depth": 0.36,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 77
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/relief-valve-knob-group",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.24,
        0.78,
        0.23,
        1
      ],
      "sourceUserData": {
        "partId": "relief-valve-knob-group",
        "componentRole": "actuator",
        "BOMqty": 1
      },
      "gltfNode": 78
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/relief-valve-knob-group/relief-knob-stem",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/relief-valve-knob-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0.014,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/relief-valve-knob-group/relief-knob-stem",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 79
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/relief-valve-knob-group/relief-knob-wheel",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/relief-valve-knob-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0.032,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/relief-valve-knob-group/relief-knob-wheel",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "actuator",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 80
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/relief-valve-knob-group/relief-knob-pointer-bar",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/relief-valve-knob-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.034,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/relief-valve-knob-group/relief-knob-pointer-bar",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.01,
            "height": 0.056,
            "depth": 0.022,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 81
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "accumulator-and-cooler-group",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 82
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/accumulator-clamp-stand",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.33,
        0.76,
        -0.19,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/accumulator-clamp-stand",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.14,
            "height": 0.32,
            "depth": 0.14,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 83
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/bladder-accumulator-shell",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.33,
        0.9,
        -0.19,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/bladder-accumulator-shell",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.082,
            "topRadius": 0.082,
            "height": 0.38,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 84
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/accumulator-clamp-band",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.33,
        0.88,
        -0.19,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/accumulator-clamp-band",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 85
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/accumulator-gas-valve-cap",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.33,
        1.112,
        -0.19,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/accumulator-gas-valve-cap",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.026,
            "topRadius": 0.026,
            "height": 0.045,
            "radialSegments": 48,
            "chamfer": 0.00091
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 86
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/air-oil-cooler-core",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.22,
        0.76,
        -0.21,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/air-oil-cooler-core",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.28,
            "height": 0.28,
            "depth": 0.09,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 87
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/air-oil-cooler-shroud",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.22,
        0.76,
        -0.268,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/air-oil-cooler-shroud",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.115,
            "topRadius": 0.115,
            "height": 0.055,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 88
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/air-oil-cooler-motor",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.22,
        0.76,
        -0.295,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/air-oil-cooler-motor",
        "assetId": "c04-06-hydraulic-power-unit",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.048,
            "topRadius": 0.048,
            "height": 0.07,
            "radialSegments": 48,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 89
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/pump-to-manifold-hose",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/pump-to-manifold-hose",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 90
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/pump-to-manifold-hose-rib-2",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.36952173408563516,
        0.22560303862815925,
        0.9014194123714478,
        0,
        0.22560303862815925,
        0.9192728222527312,
        -0.3225534796421202,
        0,
        -0.9014194123714478,
        0.3225534796421202,
        0.28879455633836637,
        0,
        0.20696913652166668,
        0.6912065377450426,
        0.06974819912880793,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/pump-to-manifold-hose-rib-2",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 91
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/pump-to-manifold-hose-rib-4",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.3857157114767261,
        0.22741034861627177,
        0.8941520694279181,
        0,
        0.22741034861627177,
        0.9158118356207724,
        -0.33101845126690005,
        0,
        -0.8941520694279181,
        0.33101845126690005,
        0.3015275470974985,
        0,
        0.1739528796336385,
        0.703306686700592,
        0.08071513683696781,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/pump-to-manifold-hose-rib-4",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 92
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/pump-to-manifold-hose-rib-6",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.36294968088722057,
        0.22480210859145233,
        0.904285099466259,
        0,
        0.22480210859145233,
        0.9206719053252423,
        -0.31910383062198555,
        0,
        -0.904285099466259,
        0.31910383062198555,
        0.2836215862124629,
        0,
        0.14093529487376444,
        0.7153255982733682,
        0.09157128012882298,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/pump-to-manifold-hose-rib-6",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 93
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/pump-to-manifold-hose-rib-8",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.2979504984170007,
        0.214761362690227,
        0.9301091643395937,
        0,
        0.214761362690227,
        0.9343031469995133,
        -0.28452624940810384,
        0,
        -0.9301091643395937,
        0.28452624940810384,
        0.23225364541651405,
        0,
        0.10790044777989335,
        0.7262884238700907,
        0.10098709600871673,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/pump-to-manifold-hose-rib-8",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 94
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/pump-to-manifold-hose-rib-10",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.18348006423226038,
        0.18732543120567915,
        0.9650099734473896,
        0,
        0.18732543120567915,
        0.9570239309057418,
        -0.22139191154450125,
        0,
        -0.9650099734473896,
        0.22139191154450125,
        0.14050399513800216,
        0,
        0.07483240388987426,
        0.7352203148974791,
        0.10763305148099239,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/pump-to-manifold-hose-rib-10",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 95
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/pump-to-manifold-hose-rib-12",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.022001881195568895,
        0.12425642756267706,
        0.9920061781225042,
        0,
        0.12425642756267706,
        0.9842129964324335,
        -0.12603617680194723,
        0,
        -0.9920061781225042,
        0.12603617680194723,
        0.006214877628002435,
        0,
        0.042191753971353115,
        0.7410914835578847,
        0.1101842560601242,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/pump-to-manifold-hose-rib-12",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 96
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/pump-to-manifold-hose-rib-14",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.10748503430234435,
        0.04598564152943592,
        0.9931426323414729,
        0,
        0.04598564152943592,
        0.9980905572884731,
        -0.04123784941908959,
        0,
        -0.9931426323414729,
        0.04123784941908959,
        -0.10939447701387128,
        0,
        0.01092928071978232,
        0.7436533127350688,
        0.10846077800936291,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/pump-to-manifold-hose-rib-14",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 97
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/pump-to-manifold-hose-rib-16",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.18502443494522613,
        -0.0191173547639199,
        0.9825479556846222,
        0,
        -0.0191173547639199,
        0.9996915901120752,
        0.015850911835632645,
        0,
        -0.9825479556846222,
        -0.015850911835632645,
        -0.18533284483315082,
        0,
        -0.020369759061647646,
        0.7439780516448526,
        0.10368627711744154,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/pump-to-manifold-hose-rib-16",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 98
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/pump-to-manifold-hose-rib-18",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.22075145267356788,
        -0.05624024141061362,
        0.9737072616493037,
        0,
        -0.05624024141061362,
        0.9974090018512803,
        0.04485887060669976,
        0,
        -0.9737072616493037,
        -0.04485887060669976,
        -0.22334245082228765,
        0,
        -0.05169121058718489,
        0.7429316707133268,
        0.09704179448416399,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/pump-to-manifold-hose-rib-18",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 99
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/pump-to-manifold-hose-rib-20",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.2233520738456105,
        -0.059175827398261466,
        0.9729399121017681,
        0,
        -0.059175827398261466,
        0.9971375545739167,
        0.047062922880760104,
        0,
        -0.9729399121017681,
        -0.047062922880760104,
        -0.22621451927169378,
        0,
        -0.08302091907107743,
        0.7413801403665815,
        0.0897083712093342,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/pump-to-manifold-hose-rib-20",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 100
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/manifold-to-port-p-pipe",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/manifold-to-port-p-pipe",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 101
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/manifold-to-port-p-pipe-rib-2",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        0.9999999999999998,
        0,
        0,
        1,
        0,
        0,
        -0.9999999999999998,
        0,
        2.220446049250313e-16,
        0,
        -0.3604883916825556,
        0.74,
        0.12,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/manifold-to-port-p-pipe-rib-2",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 102
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/manifold-to-port-p-pipe-rib-4",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        0.9999999999999998,
        0,
        0,
        1,
        0,
        0,
        -0.9999999999999998,
        0,
        2.220446049250313e-16,
        0,
        -0.3710388570295807,
        0.74,
        0.12,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/manifold-to-port-p-pipe-rib-4",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 103
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/manifold-to-port-p-pipe-rib-6",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        0.9999999999999998,
        0,
        0,
        1,
        0,
        0,
        -0.9999999999999998,
        0,
        2.220446049250313e-16,
        0,
        -0.3815836793161996,
        0.74,
        0.12,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/manifold-to-port-p-pipe-rib-6",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 104
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/manifold-to-port-p-pipe-rib-8",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        0.9999999999999998,
        0,
        0,
        1,
        0,
        0,
        -0.9999999999999998,
        0,
        2.220446049250313e-16,
        0,
        -0.39205514181753626,
        0.74,
        0.12,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/manifold-to-port-p-pipe-rib-8",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 105
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/manifold-to-port-p-pipe-rib-10",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        0.9999999999999998,
        0,
        0,
        1,
        0,
        0,
        -0.9999999999999998,
        0,
        2.220446049250313e-16,
        0,
        -0.4023855278087151,
        0.74,
        0.12,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/manifold-to-port-p-pipe-rib-10",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 106
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/manifold-to-port-p-pipe-rib-12",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        1,
        0,
        0,
        1,
        0,
        0,
        -1,
        0,
        2.220446049250313e-16,
        0,
        -0.4123348406820435,
        0.74,
        0.12,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/manifold-to-port-p-pipe-rib-12",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 107
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/manifold-to-port-p-pipe-rib-14",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        0.9999999999999998,
        0,
        0,
        1,
        0,
        0,
        -0.9999999999999998,
        0,
        2.220446049250313e-16,
        0,
        -0.42155193710141403,
        0.74,
        0.12,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/manifold-to-port-p-pipe-rib-14",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 108
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/manifold-to-port-p-pipe-rib-16",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        0.9999999999999998,
        0,
        0,
        1,
        0,
        0,
        -0.9999999999999998,
        0,
        2.220446049250313e-16,
        0,
        -0.4306174232978682,
        0.74,
        0.12,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/manifold-to-port-p-pipe-rib-16",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 109
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/manifold-to-port-p-pipe-rib-18",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        0.9999999999999998,
        0,
        0,
        1,
        0,
        0,
        -0.9999999999999998,
        0,
        2.220446049250313e-16,
        0,
        -0.43958998709963176,
        0.74,
        0.12,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/manifold-to-port-p-pipe-rib-18",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 110
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/manifold-to-port-p-pipe-rib-20",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        0.9999999999999998,
        0,
        0,
        1,
        0,
        0,
        -0.9999999999999998,
        0,
        2.220446049250313e-16,
        0,
        -0.44852831633493034,
        0.74,
        0.12,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/manifold-to-port-p-pipe-rib-20",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 111
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/port-t-to-cooler-pipe",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/port-t-to-cooler-pipe",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 112
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/port-t-to-cooler-pipe-rib-2",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.6391959718711737,
        0.08454210763031987,
        -0.7643828501353815,
        0,
        0.08454210763031987,
        0.9956397111234859,
        0.03942331380496758,
        0,
        0.7643828501353815,
        -0.03942331380496758,
        -0.6435562607476879,
        0,
        -0.4492049499142547,
        0.7396250082845502,
        -0.1307250403573627,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/port-t-to-cooler-pipe-rib-2",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 113
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/port-t-to-cooler-pipe-rib-4",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.6371785171874746,
        0.10807787229655813,
        -0.7631007212384354,
        0,
        0.10807787229655813,
        0.9928652701232498,
        0.050375876200172996,
        0,
        0.7631007212384354,
        -0.050375876200172996,
        -0.644313247064225,
        0,
        -0.436093434511834,
        0.7388158156354219,
        -0.14178616863423474,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/port-t-to-cooler-pipe-rib-4",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 114
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/port-t-to-cooler-pipe-rib-6",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.6397993431466504,
        0.07495491492578825,
        -0.7648781348931233,
        0,
        0.07495491492578825,
        0.9965738251481726,
        0.03496243352524772,
        0,
        0.7648781348931233,
        -0.03496243352524772,
        -0.6432255179984778,
        0,
        -0.42301068868365643,
        0.7380460957984462,
        -0.1528167434638786,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/port-t-to-cooler-pipe-rib-6",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 115
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/port-t-to-cooler-pipe-rib-8",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.6389252059553643,
        -0.02085751543895811,
        -0.7689860500975352,
        0,
        -0.02085751543895811,
        0.9997345602174489,
        -0.009786376067663931,
        0,
        0.7689860500975352,
        0.009786376067663931,
        -0.6391906457379155,
        0,
        -0.41030194732064074,
        0.7377895225194542,
        -0.16345012347955698,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/port-t-to-cooler-pipe-rib-8",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 116
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/port-t-to-cooler-pipe-rib-10",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.6051610507007417,
        -0.19258755060807237,
        -0.7724572079187019,
        0,
        -0.19258755060807237,
        0.9768933063551317,
        -0.09267957352794527,
        0,
        0.7724572079187019,
        0.09267957352794527,
        -0.62826774434561,
        0,
        -0.3983124453137054,
        0.7385197695442773,
        -0.17331966731453258,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/port-t-to-cooler-pipe-rib-10",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 117
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/port-t-to-cooler-pipe-rib-12",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.48382326440209966,
        -0.42083600374114966,
        -0.7673409325576698,
        0,
        -0.42083600374114966,
        0.8806441802783138,
        -0.21763015805975916,
        0,
        0.7673409325576698,
        0.21763015805975916,
        -0.6031790841237858,
        0,
        -0.38801084559132193,
        0.7405265240144945,
        -0.18156987467148267,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/port-t-to-cooler-pipe-rib-12",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 118
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/port-t-to-cooler-pipe-rib-14",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.33560385295066486,
        -0.5652442299938444,
        -0.7535708422858032,
        0,
        -0.5652442299938444,
        0.7607815829255953,
        -0.3189205912760912,
        0,
        0.7535708422858032,
        0.3189205912760912,
        -0.5748222700250696,
        0,
        -0.3804674907233789,
        0.7431996303251942,
        -0.18741048600965193,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/port-t-to-cooler-pipe-rib-14",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 119
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/port-t-to-cooler-pipe-rib-16",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.20796827950571517,
        -0.6422354061065071,
        -0.7377552967364199,
        0,
        -0.6422354061065071,
        0.6585454073135382,
        -0.39223925052122993,
        0,
        0.7377552967364199,
        0.39223925052122993,
        -0.549422872192177,
        0,
        -0.37343658168622995,
        0.7465758293492695,
        -0.1927068770365968,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/port-t-to-cooler-pipe-rib-16",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 120
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/port-t-to-cooler-pipe-rib-18",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.13450778822199339,
        -0.6732260111398278,
        -0.7270999881944596,
        0,
        -0.6732260111398278,
        0.6005022911428812,
        -0.4314669584764359,
        0,
        0.7270999881944596,
        0.4314669584764359,
        -0.5340054970791122,
        0,
        -0.36671975235182575,
        0.7503829561654135,
        -0.1976697136792429,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/port-t-to-cooler-pipe-rib-18",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 121
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/port-t-to-cooler-pipe-rib-20",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.12869252085347394,
        -0.6753235009617732,
        -0.7262068604227805,
        0,
        -0.6753235009617732,
        0.5959379348005163,
        -0.4345067858094157,
        0,
        0.7262068604227805,
        0.4345067858094157,
        -0.5327545860529577,
        0,
        -0.360118636592117,
        0.75434884585232,
        -0.2025096618645158,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/port-t-to-cooler-pipe-rib-20",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 122
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/cooler-to-return-filter-hose",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/cooler-to-return-filter-hose",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 123
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/cooler-to-return-filter-hose-rib-2",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5057608622494874,
        -0.09202855408051772,
        -0.8577509518796843,
        0,
        -0.09202855408051772,
        0.9828640548284018,
        -0.15971535605608403,
        0,
        0.8577509518796843,
        0.15971535605608403,
        0.48862491707788913,
        0,
        -0.06948267339285491,
        0.7818684176353968,
        -0.20394576371977619,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/cooler-to-return-filter-hose-rib-2",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 124
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/cooler-to-return-filter-hose-rib-4",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5039154274008412,
        -0.09517131833685126,
        -0.8584938335209247,
        0,
        -0.09517131833685126,
        0.9817418635162982,
        -0.16469770364389325,
        0,
        0.8584938335209247,
        0.16469770364389325,
        0.4856572909171395,
        0,
        -0.05886976952434731,
        0.783886536239926,
        -0.1979294140349912,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/cooler-to-return-filter-hose-rib-4",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 125
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/cooler-to-return-filter-hose-rib-6",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5065080456372918,
        -0.09076921028451804,
        -0.8574441965335214,
        0,
        -0.09076921028451804,
        0.983304591973916,
        -0.1577118570917722,
        0,
        0.8574441965335214,
        0.1577118570917722,
        0.48981263761120775,
        0,
        -0.04826555449778176,
        0.7858910456654429,
        -0.1919096201142572,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/cooler-to-return-filter-hose-rib-6",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 126
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/cooler-to-return-filter-hose-rib-8",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5138652170412048,
        -0.07874865907935284,
        -0.8542489024917732,
        0,
        -0.07874865907935284,
        0.9872435556471553,
        -0.13837922722130722,
        0,
        0.8542489024917732,
        0.13837922722130722,
        0.5011087726883601,
        0,
        -0.03777429441646281,
        0.7877186357638037,
        -0.18584505112618646,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/cooler-to-return-filter-hose-rib-8",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 127
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/cooler-to-return-filter-hose-rib-10",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5268880792322411,
        -0.05897436899781344,
        -0.8478861809018174,
        0,
        -0.05897436899781344,
        0.9926487242320036,
        -0.10569074738067384,
        0,
        0.8478861809018174,
        0.10569074738067384,
        0.5195368034642447,
        0,
        -0.02750025538369501,
        0.7892059963868642,
        -0.1796943762393911,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/cooler-to-return-filter-hose-rib-10",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 128
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/cooler-to-return-filter-hose-rib-12",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5463218827060824,
        -0.03241335671563354,
        -0.8369478925135703,
        0,
        -0.03241335671563354,
        0.9976842046077918,
        -0.0597963392068674,
        0,
        0.8369478925135703,
        0.0597963392068674,
        0.5440060873138743,
        0,
        -0.017711794569924787,
        0.79017901413782,
        -0.1735235660954213,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/cooler-to-return-filter-hose-rib-12",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 129
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/cooler-to-return-filter-hose-rib-14",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5642089122332685,
        -0.010512355730888828,
        -0.8255651359726495,
        0,
        -0.010512355730888828,
        0.9997464160555025,
        -0.019914666986052633,
        0,
        0.8255651359726495,
        0.019914666986052633,
        0.5639553282887709,
        0,
        -0.00874788588532136,
        0.7905991795522072,
        -0.16754294580627002,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/cooler-to-return-filter-hose-rib-14",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 130
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/cooler-to-return-filter-hose-rib-16",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5771555102878703,
        0.004053388393836988,
        -0.8166242018130965,
        0,
        0.004053388393836988,
        0.999961144208164,
        0.007828161752820981,
        0,
        0.8166242018130965,
        -0.007828161752820981,
        0.5771166544960341,
        0,
        -0.000018229364982784018,
        0.790652439956848,
        -0.16146946852528146,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/cooler-to-return-filter-hose-rib-16",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 131
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/cooler-to-return-filter-hose-rib-18",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5841513975890869,
        0.011520448103522535,
        -0.8115629513292304,
        0,
        0.011520448103522535,
        0.9996808436442097,
        0.022483107576471734,
        0,
        0.8115629513292304,
        -0.022483107576471734,
        0.5838322412332966,
        0,
        0.008567853248225744,
        0.7904808230974503,
        -0.15533907889445717,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/cooler-to-return-filter-hose-rib-18",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 132
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/cooler-to-return-filter-hose-rib-20",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5846968136947461,
        0.012091298356345296,
        -0.8111617819888145,
        0,
        0.012091298356345296,
        0.9996479692408747,
        0.023616479345001825,
        0,
        0.8111617819888145,
        -0.023616479345001825,
        0.584344782935621,
        0,
        0.017101040211438975,
        0.7902263567197227,
        -0.14918772155579865,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/accumulator-and-cooler-group/cooler-to-return-filter-hose-rib-20",
        "assetId": "c04-06-hydraulic-power-unit"
      },
      "gltfNode": 133
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/c04-06-hydraulic-power-unit:port-p",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.48,
        0.74,
        0.12,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit:port-p",
        "componentRole": "port",
        "BOMqty": 1
      },
      "gltfNode": 134
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/c04-06-hydraulic-power-unit:port-t",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.48,
        0.74,
        -0.12,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit:port-t",
        "componentRole": "port",
        "BOMqty": 1
      },
      "gltfNode": 135
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/c04-06-hydraulic-power-unit:gauge-face",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.12,
        0.94,
        0.21,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit:gauge-face",
        "componentRole": "sensor",
        "BOMqty": 1
      },
      "gltfNode": 136
    },
    {
      "id": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base/c04-06-hydraulic-power-unit:motor-top",
      "parent": "c04-06-hydraulic-power-unit/c04-06-hydraulic-power-unit:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.24,
        1.14,
        0.06,
        1
      ],
      "sourceUserData": {
        "partId": "c04-06-hydraulic-power-unit:motor-top",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 137
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "산업용 유압 파워 유닛 설계 지침(스키드 1.10×0.08×0.76 m 포크 포켓 및 4코너 Ø0.016 앵커 구멍 관통, 오일 탱크 0.96×0.52×0.64 m 사이트 글라스 lens 및 청소 커버 볼트 8개, 수직 모터 Ø0.24×0.38 m 팬 커버 통풍 슬롯 관통 및 pump_shaft 회전, 3스테이션 매니폴드 및 pressure_set 핸들 회전, Ø0.068 압력계 lens, 어큐뮬레이터, 공랭 쿨러, P/T 포트 플랜지)에 따른 자체 설계"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S01 Festo 제품군",
      "url": "https://www.festo.com/us/en",
      "basis": "제품군 분류 참고; 열람하지 않음"
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S03 Sulzer Our products",
      "url": "https://www.sulzer.com/en/products",
      "basis": "제품군 분류 참고; 열람하지 않음"
    }
  ],
  "rights": {
    "id": "c04-06-hydraulic-power-unit",
    "assetTypeId": "c04-06-hydraulic-power-unit",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:5775ed287f0763e964b9cc8bd427c54d965d345d425b6ab9ea8b54a204d05188",
    "modelSource": "kit/models/c04-06-hydraulic-power-unit.mjs",
    "dslExampleSource": "dsl/models/c04-06-hydraulic-power-unit.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/c04-06-hydraulic-power-unit.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/c04-06-hydraulic-power-unit.txt",
      "sha256": "sha256:e07d36213ac2541cb360f586a1c375a305cf41fdc28ffcb91a2cc5640a8efab5",
      "bytes": 809
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/c04-06-hydraulic-power-unit/model.glb",
      "bytes": 1246400,
      "sha256": "sha256:9e651048ce6fbc7b40cb4ab18a1655dab83a7f73b904696bd6728d0a1c5a1428"
    },
    "licenses": [
      {
        "path": "open-assets/c04-06-hydraulic-power-unit/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/c04-06-hydraulic-power-unit/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/c04-06-hydraulic-power-unit/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/c04-06-hydraulic-power-unit/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/c04-06-hydraulic-power-unit/LICENSES/ASSET-NOTICES/c04-06-hydraulic-power-unit.txt",
        "bytes": 809,
        "sha256": "sha256:e07d36213ac2541cb360f586a1c375a305cf41fdc28ffcb91a2cc5640a8efab5"
      }
    ],
    "source": {
      "path": "kit/models/c04-06-hydraulic-power-unit.mjs",
      "bytes": 23023,
      "sha256": "sha256:3b4d55c2f8f9eb6824f91e5840237927860a250cbd618fe45f2e154b277d31ff"
    },
    "ds2": {
      "path": "dsl/models/c04-06-hydraulic-power-unit.ds2",
      "bytes": 2747,
      "sha256": "sha256:832c8991744e9769168a0d3b84a6d8f1ab1ab6a32b0de4de6badc06c1df55ef0",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 138,
    "triangles": 78420,
    "maxMatrixError": 4.440892098500626e-16,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 11,
    "nodeComparisons": 1518,
    "semanticFrameComparisons": 55,
    "acceptanceCases": 4,
    "acceptanceFrameComparisons": 20,
    "maxMotionMatrixError": 4.440892098500626e-16
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "c04-06-hydraulic-power-unit",
    "kind": "equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "C 유체 배관과 유틸리티 / C04 공압과 유압 공급",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "supply": {
        "frameId": "port-p",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -0.48,
            0.74,
            0.12
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "return": {
        "frameId": "port-t",
        "portClass": "unknown",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -0.48,
            0.74,
            -0.12
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "work": {
        "frameId": "port-p",
        "portClass": "process",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -0.48,
            0.74,
            0.12
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
