{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "b01-08-inclined-cleated-belt-conveyor",
  "assetTypeId": "b01-08-inclined-cleated-belt-conveyor",
  "label": "경사 각도 조절형 클리트 벨트 컨베이어",
  "category": "B 이송 물류와 포장",
  "description": "하단 수평 투입부(y=0.45m)에서 클리트 경사 상승부를 거쳐 상단 노즈오버 토출부(y=1.35m)로 설비 간 높이 단차를 연결하는 Z형 경사 클리트 벨트 컨베이어 표시 모델.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -1.2599999994039535,
      -4.5924256971943795e-18,
      -0.38500000298023224
    ],
    "max": [
      1.2868509333347637,
      1.5200000003799796,
      0.38500000298023224
    ]
  },
  "size": [
    2.5468509327387174,
    1.5200000003799796,
    0.7700000059604645
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 70,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 5,
      "blindSocketHeads": 16,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 10,
    "warnings": [],
    "changedMeshes": 91,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 86948,
      "afterTriangles": 77540,
      "reachedTarget": true,
      "changedMeshes": 14,
      "changes": [
        {
          "meshes": [
            "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-1",
            "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-2",
            "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-3",
            "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-4",
            "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-5",
            "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-6",
            "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-7",
            "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-8",
            "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/belt-cleat-infeed-1",
            "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/belt-cleat-infeed-2",
            "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/belt-cleat-infeed-3",
            "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/belt-cleat-discharge-1",
            "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/belt-cleat-discharge-2",
            "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/belt-cleat-discharge-3"
          ],
          "radiusM": 0.001,
          "dimensionsM": [
            0.008,
            0.032,
            0.41600000000000004
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        }
      ],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ]
    }
  },
  "source": {
    "path": "kit/models/b01-08-inclined-cleated-belt-conveyor.mjs",
    "sourceSha256": "sha256:b3038c08c3a7cfc594b52a1daf0e0684ba3ff37ea629248e03f8125ee79c4d1c",
    "deliverySha256": "sha256:b3038c08c3a7cfc594b52a1daf0e0684ba3ff37ea629248e03f8125ee79c4d1c",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:000d75b0f88425240f3f816410805a0e55b628b50e969126a8bc662e65700f53",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:000d75b0f88425240f3f816410805a0e55b628b50e969126a8bc662e65700f53",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [],
  "parameterValues": {},
  "joints": [
    {
      "id": "belt_drive",
      "label": "클리트 벨트 구동 풀리 회전",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "unit": "rad",
      "min": -6.283185307179586,
      "max": 6.283185307179586,
      "initial": 0
    },
    {
      "id": "incline_pitch",
      "label": "상단 노즈오버 토출부 피치 각도 조절",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "unit": "rad",
      "min": -0.1,
      "max": 0.1,
      "initial": 0
    }
  ],
  "initialState": {
    "belt_drive": 0,
    "incline_pitch": 0
  },
  "bindings": [
    {
      "id": "belt_drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        -1.16,
        0.39,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/tail-pulley-rotor",
      "gltfNode": 53
    },
    {
      "id": "belt_drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        -0.62,
        0.39,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/lower-bend-pulley-rotor",
      "gltfNode": 58
    },
    {
      "id": "belt_drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        0.62,
        1.29,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/upper-knuckle-pulley-rotor",
      "gltfNode": 63
    },
    {
      "id": "belt_drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        0.54,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-pulley-rotor",
      "gltfNode": 124
    },
    {
      "id": "belt_drive",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0.54,
        0.222,
        -0.32
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 3,
      "nodeName": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/motor-fan-rotor",
      "gltfNode": 139
    },
    {
      "id": "incline_pitch",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0.62,
        1.29,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly",
      "gltfNode": 112
    }
  ],
  "jointBindings": [
    {
      "id": "belt_drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        -1.16,
        0.39,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/tail-pulley-rotor",
      "gltfNode": 53
    },
    {
      "id": "belt_drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        -0.62,
        0.39,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/lower-bend-pulley-rotor",
      "gltfNode": 58
    },
    {
      "id": "belt_drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        0.62,
        1.29,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/upper-knuckle-pulley-rotor",
      "gltfNode": 63
    },
    {
      "id": "belt_drive",
      "kind": "revolute",
      "axis": [
        0,
        0,
        -1
      ],
      "zeroPosition": [
        0.54,
        0,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-pulley-rotor",
      "gltfNode": 124
    },
    {
      "id": "belt_drive",
      "kind": "revolute",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0.54,
        0.222,
        -0.32
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 3,
      "nodeName": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/motor-fan-rotor",
      "gltfNode": 139
    },
    {
      "id": "incline_pitch",
      "kind": "revolute",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0.62,
        1.29,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly",
      "gltfNode": 112
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base",
      "nodeName": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "infeed": {
      "id": "infeed",
      "node": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/b01-08-inclined-cleated-belt-conveyor:infeed",
      "nodeName": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/b01-08-inclined-cleated-belt-conveyor:infeed",
      "gltfNode": 146,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.22,
        0.45,
        0,
        1
      ],
      "position": [
        -1.22,
        0.45,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "work": {
      "id": "work",
      "node": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/b01-08-inclined-cleated-belt-conveyor:work",
      "nodeName": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/b01-08-inclined-cleated-belt-conveyor:work",
      "gltfNode": 147,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.9,
        0,
        1
      ],
      "position": [
        0,
        0.9,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "outfeed": {
      "id": "outfeed",
      "node": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/b01-08-inclined-cleated-belt-conveyor:outfeed",
      "nodeName": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/b01-08-inclined-cleated-belt-conveyor:outfeed",
      "gltfNode": 145,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.22,
        1.35,
        0,
        1
      ],
      "position": [
        1.22,
        1.35,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    }
  },
  "ports": {
    "mount": "base",
    "infeed": "infeed",
    "outfeed": "outfeed",
    "work": "work"
  },
  "nodes": [
    {
      "id": "b01-08-inclined-cleated-belt-conveyor",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 70,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 5,
            "blindSocketHeads": 16,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 10,
          "warnings": [],
          "changedMeshes": 91,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 86948,
            "afterTriangles": 77540,
            "reachedTarget": true,
            "changedMeshes": 14,
            "changes": [
              {
                "meshes": [
                  "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-1",
                  "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-2",
                  "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-3",
                  "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-4",
                  "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-5",
                  "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-6",
                  "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-7",
                  "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-8",
                  "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/belt-cleat-infeed-1",
                  "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/belt-cleat-infeed-2",
                  "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/belt-cleat-infeed-3",
                  "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/belt-cleat-discharge-1",
                  "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/belt-cleat-discharge-2",
                  "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/belt-cleat-discharge-3"
                ],
                "radiusM": 0.001,
                "dimensionsM": [
                  0.008,
                  0.032,
                  0.41600000000000004
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              }
            ],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ]
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "b01-08-inclined-cleated-belt-conveyor",
          "coordinate_profile": "lib3d-world/1",
          "label": "경사 각도 조절형 클리트 벨트 컨베이어",
          "category": "B 이송 물류와 포장 / B01 연속 이송",
          "summary": "하단 수평 투입부(y=0.45m)에서 클리트 경사 상승부를 거쳐 상단 노즈오버 토출부(y=1.35m)로 설비 간 높이 단차를 연결하는 Z형 경사 클리트 벨트 컨베이어 표시 모델.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [],
          "joints": [
            {
              "id": "belt_drive",
              "label": "클리트 벨트 구동 풀리 회전",
              "kind": "revolute",
              "axis": [
                0,
                0,
                -1
              ],
              "unit": "rad",
              "min": -6.283185307179586,
              "max": 6.283185307179586,
              "initial": 0
            },
            {
              "id": "incline_pitch",
              "label": "상단 노즈오버 토출부 피치 각도 조절",
              "kind": "revolute",
              "axis": [
                0,
                0,
                1
              ],
              "unit": "rad",
              "min": -0.1,
              "max": 0.1,
              "initial": 0
            }
          ],
          "ports": {
            "mount": "base",
            "infeed": "infeed",
            "outfeed": "outfeed",
            "work": "work"
          },
          "required_host_features": [
            "revolute"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "B01-08 패킷 설계 지침(Z형 수평 투입 y=0.45m -> 클리트 경사 상승 -> 수평 토출 y=1.35m, 스테인리스 측면 스커트, 상부 중공축 기어드모터, 4코너 관통 볼트 구멍 앵커 풋플레이트, 관절 belt_drive·incline_pitch, 일체형 DS_Brand_Plate)에 따른 자체 설계."
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {},
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base",
          "infeed": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/b01-08-inclined-cleated-belt-conveyor:infeed",
          "work": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/b01-08-inclined-cleated-belt-conveyor:work",
          "outfeed": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/b01-08-inclined-cleated-belt-conveyor:outfeed"
        },
        "jointBindings": [
          {
            "id": "belt_drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              -1
            ],
            "zeroPosition": [
              -1.16,
              0.39,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/tail-pulley-rotor"
          },
          {
            "id": "belt_drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              -1
            ],
            "zeroPosition": [
              -0.62,
              0.39,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/lower-bend-pulley-rotor"
          },
          {
            "id": "belt_drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              -1
            ],
            "zeroPosition": [
              0.62,
              1.29,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/upper-knuckle-pulley-rotor"
          },
          {
            "id": "belt_drive",
            "kind": "revolute",
            "axis": [
              0,
              0,
              -1
            ],
            "zeroPosition": [
              0.54,
              0,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-pulley-rotor"
          },
          {
            "id": "belt_drive",
            "kind": "revolute",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0.54,
              0.222,
              -0.32
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 3,
            "nodeName": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/motor-fan-rotor"
          },
          {
            "id": "incline_pitch",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0.62,
              1.29,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly"
          }
        ],
        "joints": [
          {
            "id": "belt_drive",
            "label": "클리트 벨트 구동 풀리 회전",
            "kind": "revolute",
            "axis": [
              0,
              0,
              -1
            ],
            "unit": "rad",
            "min": -6.283185307179586,
            "max": 6.283185307179586,
            "initial": 0,
            "value": 0
          },
          {
            "id": "incline_pitch",
            "label": "상단 노즈오버 토출부 피치 각도 조절",
            "kind": "revolute",
            "axis": [
              0,
              0,
              1
            ],
            "unit": "rad",
            "min": -0.1,
            "max": 0.1,
            "initial": 0,
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 55
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "B01-08 패킷 설계 지침(Z형 수평 투입 y=0.45m -> 클리트 경사 상승 -> 수평 토출 y=1.35m, 스테인리스 측면 스커트, 상부 중공축 기어드모터, 4코너 관통 볼트 구멍 앵커 풋플레이트, 관절 belt_drive·incline_pitch, 일체형 DS_Brand_Plate)에 따른 자체 설계."
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "belt_drive": 0,
          "incline_pitch": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base",
      "parent": "b01-08-inclined-cleated-belt-conveyor",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor:base",
        "componentRole": "frame",
        "BOMqty": 1,
        "referencePlane": "y=0 floor mounting center of Z-type inclined cleated belt conveyor"
      },
      "gltfNode": 1
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "conveyor-support-structure",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 2
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/anchor-footplate-1",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.92,
        0,
        0.31,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/anchor-footplate-1",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "boltHoleDiameterM": 0.016,
        "boltHoleCount": 4
      },
      "gltfNode": 3
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/support-leg-post-1",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.92,
        0.18899999999999997,
        0.31,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/support-leg-post-1",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.056,
            "height": 0.34199999999999997,
            "depth": 0.056,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 4
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/anchor-footplate-2",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.92,
        0,
        -0.31,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/anchor-footplate-2",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "boltHoleDiameterM": 0.016,
        "boltHoleCount": 4
      },
      "gltfNode": 5
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/support-leg-post-2",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.92,
        0.18899999999999997,
        -0.31,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/support-leg-post-2",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.056,
            "height": 0.34199999999999997,
            "depth": 0.056,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 6
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/anchor-footplate-3",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.62,
        0,
        0.31,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/anchor-footplate-3",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "boltHoleDiameterM": 0.016,
        "boltHoleCount": 4
      },
      "gltfNode": 7
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/support-leg-post-3",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.62,
        0.634,
        0.31,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/support-leg-post-3",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.056,
            "height": 1.232,
            "depth": 0.056,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 8
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/anchor-footplate-4",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.62,
        0,
        -0.31,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/anchor-footplate-4",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "boltHoleDiameterM": 0.016,
        "boltHoleCount": 4
      },
      "gltfNode": 9
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/support-leg-post-4",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.62,
        0.634,
        -0.31,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/support-leg-post-4",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.056,
            "height": 1.232,
            "depth": 0.056,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 10
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/infeed-stand-crossbar",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.92,
        0.18,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/infeed-stand-crossbar",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.046,
            "depth": 0.5619999999999999,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 11
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/main-column-lower-crossbar",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.62,
        0.28,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/main-column-lower-crossbar",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.052,
            "height": 0.048,
            "depth": 0.5619999999999999,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 12
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/main-column-upper-crossbar",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.62,
        0.78,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/main-column-upper-crossbar",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.054,
            "height": 0.056,
            "depth": 0.676,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 13
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-diagonal-strut-1",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.8995568742153349,
        0.4368036516009638,
        0,
        0,
        -0.4368036516009638,
        0.8995568742153349,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.04,
        0.56,
        0.265,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-diagonal-strut-1",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.84,
            "height": 0.04,
            "depth": 0.036,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 14
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-diagonal-strut-2",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.8995568742153349,
        0.4368036516009638,
        0,
        0,
        -0.4368036516009638,
        0.8995568742153349,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.04,
        0.56,
        -0.265,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-diagonal-strut-2",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.84,
            "height": 0.04,
            "depth": 0.036,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 15
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/infeed-slider-bed",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.8899999999999999,
        0.41400000000000003,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/infeed-slider-bed",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.5399999999999999,
            "height": 0.024,
            "depth": 0.48000000000000004,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 16
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/tail-takeup-plate-front",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.15,
        0.39,
        0.258,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/tail-takeup-plate-front",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "slotHeightM": 0.03
      },
      "gltfNode": 17
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/infeed-side-channel-front",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.8699999999999999,
        0.39,
        0.246,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/infeed-side-channel-front",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.58,
            "height": 0.108,
            "depth": 0.01,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 18
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/infeed-stainless-skirt-front",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.8899999999999999,
        0.49,
        0.236,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/infeed-stainless-skirt-front",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.5999999999999999,
            "height": 0.078,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 19
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/tail-takeup-plate-rear",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.15,
        0.39,
        -0.258,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/tail-takeup-plate-rear",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "slotHeightM": 0.03
      },
      "gltfNode": 20
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/infeed-side-channel-rear",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.8699999999999999,
        0.39,
        -0.246,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/infeed-side-channel-rear",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.58,
            "height": 0.108,
            "depth": 0.01,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 21
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/infeed-stainless-skirt-rear",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.8899999999999999,
        0.49,
        -0.236,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/infeed-stainless-skirt-rear",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.5999999999999999,
            "height": 0.078,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 22
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/infeed-hopper-chute",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.94,
        0.495,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/infeed-hopper-chute",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "guide",
        "BOMqty": 1,
        "throatOpeningM": [
          0.26,
          0.41
        ]
      },
      "gltfNode": 23
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        0.8093001758175348,
        0.5873952888998237,
        0,
        0,
        -0.5873952888998237,
        0.8093001758175348,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.8400000000000001,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "incline-climb-section",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 24
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/incline-slider-bed",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.024,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/incline-slider-bed",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.5321879780235845,
            "height": 0.024,
            "depth": 0.48000000000000004,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 25
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/incline-side-channel-front",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.246,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/incline-side-channel-front",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.5521879780235845,
            "height": 0.112,
            "depth": 0.01,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 26
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/incline-stainless-skirt-front",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.10200000000000001,
        0.236,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/incline-stainless-skirt-front",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.5121879780235845,
            "height": 0.084,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 27
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/incline-side-channel-rear",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.246,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/incline-side-channel-rear",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.5521879780235845,
            "height": 0.112,
            "depth": 0.01,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 28
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/incline-stainless-skirt-rear",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.10200000000000001,
        -0.236,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/incline-stainless-skirt-rear",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.5121879780235845,
            "height": 0.084,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 29
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-web-climb-top",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.055999999999999994,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-web-climb-top",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.5321879780235845,
            "height": 0.008,
            "depth": 0.46,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 30
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-web-climb-return",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.055999999999999994,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-web-climb-return",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.4921879780235845,
            "height": 0.008,
            "depth": 0.46,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 31
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-1",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.6560939890117923,
        0.076,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-1",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.032,
            "depth": 0.41600000000000004,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 32
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-2",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.4686385635798516,
        0.076,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-2",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.032,
            "depth": 0.41600000000000004,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 33
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-3",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.28118313814791096,
        0.076,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-3",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.032,
            "depth": 0.41600000000000004,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 34
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-4",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.09372771271597036,
        0.076,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-4",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.032,
            "depth": 0.41600000000000004,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 35
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-5",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.09372771271597036,
        0.076,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-5",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.032,
            "depth": 0.41600000000000004,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 36
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-6",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.28118313814791096,
        0.076,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-6",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.032,
            "depth": 0.41600000000000004,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 37
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-7",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.46863856357985156,
        0.076,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-7",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.032,
            "depth": 0.41600000000000004,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 38
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-8",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.6560939890117925,
        0.076,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-climb-8",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.032,
            "depth": 0.41600000000000004,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 39
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-return-1",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.5460939890117923,
        -0.074,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-return-1",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.028,
            "depth": 0.41600000000000004,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 40
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-return-2",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.20609398901179227,
        -0.074,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-return-2",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.028,
            "depth": 0.41600000000000004,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 41
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-return-3",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.13390601098820776,
        -0.074,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-return-3",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.028,
            "depth": 0.41600000000000004,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 42
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-return-4",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.4739060109882077,
        -0.074,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/incline-climb-section/belt-cleat-return-4",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.028,
            "depth": 0.41600000000000004,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 43
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/holddown-guide-roller-front",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.605,
        0.482,
        0.205,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/holddown-guide-roller-front",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 44
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/holddown-guide-roller-rear",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.605,
        0.482,
        -0.205,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/holddown-guide-roller-rear",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 45
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/belt-web-infeed-top",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.8899999999999999,
        0.446,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/belt-web-infeed-top",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.58,
            "height": 0.008,
            "depth": 0.46,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 46
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/belt-web-infeed-return",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.8899999999999999,
        0.334,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/belt-web-infeed-return",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.5599999999999999,
            "height": 0.008,
            "depth": 0.46,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 47
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/belt-cleat-infeed-1",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.0799999999999998,
        0.466,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/belt-cleat-infeed-1",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.032,
            "depth": 0.41600000000000004,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 48
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/belt-cleat-infeed-2",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.8799999999999999,
        0.466,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/belt-cleat-infeed-2",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.032,
            "depth": 0.41600000000000004,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 49
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/belt-cleat-infeed-3",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.6799999999999998,
        0.466,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/belt-cleat-infeed-3",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.032,
            "depth": 0.41600000000000004,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 50
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/pitch-lock-bracket-front",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.62,
        1.27,
        0.264,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/pitch-lock-bracket-front",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "lockHoleDiameterM": 0.024
      },
      "gltfNode": 51
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/pitch-lock-bracket-rear",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.62,
        1.27,
        -0.264,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/pitch-lock-bracket-rear",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "lockHoleDiameterM": 0.024
      },
      "gltfNode": 52
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/tail-pulley-rotor",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.16,
        0.39,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "tail-pulley-rotor",
        "componentRole": "Drive_Pulley",
        "BOMqty": 1
      },
      "gltfNode": 53
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/tail-pulley-rotor/tail-pulley-rotor-drum",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/tail-pulley-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/tail-pulley-rotor/tail-pulley-rotor-drum",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "Drive_Pulley",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.452,
            "radialSegments": 28,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 54
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/tail-pulley-rotor/tail-pulley-rotor-shaft",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/tail-pulley-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/tail-pulley-rotor/tail-pulley-rotor-shaft",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 55
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/tail-pulley-rotor/tail-pulley-rotor-hub-key-1",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/tail-pulley-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.238,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/tail-pulley-rotor/tail-pulley-rotor-hub-key-1",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "Drive_Pulley",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.068,
            "height": 0.014,
            "depth": 0.01,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 56
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/tail-pulley-rotor/tail-pulley-rotor-hub-key-2",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/tail-pulley-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.238,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/tail-pulley-rotor/tail-pulley-rotor-hub-key-2",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "Drive_Pulley",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.068,
            "height": 0.014,
            "depth": 0.01,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 57
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/lower-bend-pulley-rotor",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.62,
        0.39,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "lower-bend-pulley-rotor",
        "componentRole": "Drive_Pulley",
        "BOMqty": 1
      },
      "gltfNode": 58
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/lower-bend-pulley-rotor/lower-bend-pulley-rotor-drum",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/lower-bend-pulley-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/lower-bend-pulley-rotor/lower-bend-pulley-rotor-drum",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "Drive_Pulley",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.452,
            "radialSegments": 28,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 59
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/lower-bend-pulley-rotor/lower-bend-pulley-rotor-shaft",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/lower-bend-pulley-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/lower-bend-pulley-rotor/lower-bend-pulley-rotor-shaft",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 60
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/lower-bend-pulley-rotor/lower-bend-pulley-rotor-hub-key-1",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/lower-bend-pulley-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.238,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/lower-bend-pulley-rotor/lower-bend-pulley-rotor-hub-key-1",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "Drive_Pulley",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.068,
            "height": 0.014,
            "depth": 0.01,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 61
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/lower-bend-pulley-rotor/lower-bend-pulley-rotor-hub-key-2",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/lower-bend-pulley-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.238,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/lower-bend-pulley-rotor/lower-bend-pulley-rotor-hub-key-2",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "Drive_Pulley",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.068,
            "height": 0.014,
            "depth": 0.01,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 62
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/upper-knuckle-pulley-rotor",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.62,
        1.29,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "upper-knuckle-pulley-rotor",
        "componentRole": "Drive_Pulley",
        "BOMqty": 1
      },
      "gltfNode": 63
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/upper-knuckle-pulley-rotor/upper-knuckle-pulley-rotor-drum",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/upper-knuckle-pulley-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/upper-knuckle-pulley-rotor/upper-knuckle-pulley-rotor-drum",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "Drive_Pulley",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.452,
            "radialSegments": 28,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 64
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/upper-knuckle-pulley-rotor/upper-knuckle-pulley-rotor-shaft",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/upper-knuckle-pulley-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/upper-knuckle-pulley-rotor/upper-knuckle-pulley-rotor-shaft",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 65
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/upper-knuckle-pulley-rotor/upper-knuckle-pulley-rotor-hub-key-1",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/upper-knuckle-pulley-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.238,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/upper-knuckle-pulley-rotor/upper-knuckle-pulley-rotor-hub-key-1",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "Drive_Pulley",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.068,
            "height": 0.014,
            "depth": 0.01,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 66
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/upper-knuckle-pulley-rotor/upper-knuckle-pulley-rotor-hub-key-2",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/upper-knuckle-pulley-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.238,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/upper-knuckle-pulley-rotor/upper-knuckle-pulley-rotor-hub-key-2",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "Drive_Pulley",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.068,
            "height": 0.014,
            "depth": 0.01,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 67
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/presence-sensors-group",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "presence-sensors-group",
        "componentRole": "sensor",
        "BOMqty": 1
      },
      "gltfNode": 68
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/presence-sensors-group/infeed-photo-sensor-bracket",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/presence-sensors-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.11,
        0.488,
        0.258,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/presence-sensors-group/infeed-photo-sensor-bracket",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "sensor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.022,
            "height": 0.052,
            "depth": 0.022,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 69
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/presence-sensors-group/infeed-photo-sensor-head",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/presence-sensors-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.11,
        0.518,
        0.258,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/presence-sensors-group/infeed-photo-sensor-head",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "sensor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.028,
            "height": 0.026,
            "depth": 0.02,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 70
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/presence-sensors-group/infeed-photo-sensor-led",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/presence-sensors-group",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.11,
        0.532,
        0.258,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/presence-sensors-group/infeed-photo-sensor-led",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "sensor",
        "BOMqty": 1
      },
      "gltfNode": 71
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/local-disconnect-box",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.69,
        0.96,
        0.332,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/local-disconnect-box",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.145,
            "depth": 0.072,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 72
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/local-run-lamp",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.69,
        1.04,
        0.332,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/local-run-lamp",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "sensor",
        "BOMqty": 1
      },
      "gltfNode": 73
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-1-0",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.884,
        0.019,
        0.31,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-1-0",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 74
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-1-1",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.92,
        0.019,
        0.346,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-1-1",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 75
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-1-2",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.9560000000000001,
        0.019,
        0.31,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-1-2",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 76
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-1-3",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.92,
        0.019,
        0.274,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-1-3",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 77
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-2-0",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.884,
        0.019,
        -0.31,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-2-0",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 78
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-2-1",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.92,
        0.019,
        -0.274,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-2-1",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 79
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-2-2",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.9560000000000001,
        0.019,
        -0.31,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-2-2",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 80
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-2-3",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.92,
        0.019,
        -0.346,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-2-3",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 81
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-3-0",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.656,
        0.019,
        0.31,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-3-0",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 82
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-3-1",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.62,
        0.019,
        0.346,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-3-1",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 83
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-3-2",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.584,
        0.019,
        0.31,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-3-2",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 84
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-3-3",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.62,
        0.019,
        0.274,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-3-3",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 85
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-4-0",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.656,
        0.019,
        -0.31,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-4-0",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 86
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-4-1",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.62,
        0.019,
        -0.274,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-4-1",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 87
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-4-2",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.584,
        0.019,
        -0.31,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-4-2",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 88
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-4-3",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.62,
        0.019,
        -0.346,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/foot-flange-bolt-4-3",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "blind-hex-socket-head",
          "parameters": {
            "radius": 0.005,
            "height": 0.0045000000000000005,
            "socketRadius": 0.00215,
            "socketDepth": 0.0018900000000000002,
            "chamfer": 0.00017500000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 89
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/control-conduit-cable",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/control-conduit-cable",
        "assetId": "b01-08-inclined-cleated-belt-conveyor"
      },
      "gltfNode": 90
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/control-conduit-cable-rib-2",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9876177870040909,
        0.11999214101742534,
        -0.10105935328902795,
        0,
        0.11999214101742534,
        -0.16280618906350153,
        0.9793344836656543,
        0,
        0.10105935328902795,
        -0.9793344836656543,
        -0.17518840205941077,
        0,
        0.6920540468787281,
        0.8131078923045227,
        0.3191810308414501,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/control-conduit-cable-rib-2",
        "assetId": "b01-08-inclined-cleated-belt-conveyor"
      },
      "gltfNode": 91
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/control-conduit-cable-rib-4",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9971513389727267,
        0.05779659491398684,
        -0.04846401552953404,
        0,
        0.05779659491398684,
        -0.17263737302182758,
        0.9832883051539211,
        0,
        0.04846401552953404,
        -0.9832883051539211,
        -0.1754860340491009,
        0,
        0.6991526737628461,
        0.7395912711308875,
        0.30603376780446934,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/control-conduit-cable-rib-4",
        "assetId": "b01-08-inclined-cleated-belt-conveyor"
      },
      "gltfNode": 92
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/control-conduit-cable-rib-6",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.91202071846521,
        -0.30807402419690155,
        0.2707556180494304,
        0,
        -0.30807402419690155,
        -0.07877221465309003,
        0.948095635373233,
        0,
        -0.2707556180494304,
        -0.948095635373233,
        -0.16675149618788,
        0,
        0.6931353926329504,
        0.6702983850004629,
        0.29374006885140885,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/control-conduit-cable-rib-6",
        "assetId": "b01-08-inclined-cleated-belt-conveyor"
      },
      "gltfNode": 93
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/control-conduit-cable-rib-8",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.30262025297260386,
        -0.5296684325361665,
        0.7923839562140805,
        0,
        -0.5296684325361665,
        0.597710358493823,
        0.6018252893688217,
        0,
        -0.7923839562140805,
        -0.6018252893688217,
        -0.0996693885335731,
        0,
        0.6446955460396172,
        0.6018657329526851,
        0.2819481154574279,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/control-conduit-cable-rib-8",
        "assetId": "b01-08-inclined-cleated-belt-conveyor"
      },
      "gltfNode": 94
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/control-conduit-cable-rib-10",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.024654479764251946,
        -0.23153751419825272,
        0.9725135146343461,
        0,
        -0.23153751419825272,
        0.94503525225794,
        0.23086522368833615,
        0,
        -0.9725135146343461,
        -0.23086522368833615,
        -0.030310267977808003,
        0,
        0.4217234841050183,
        0.5151580003994772,
        0.2689459855975104,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/control-conduit-cable-rib-10",
        "assetId": "b01-08-inclined-cleated-belt-conveyor"
      },
      "gltfNode": 95
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/control-conduit-cable-rib-12",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.0020278251896637123,
        -0.11577230061520183,
        0.9932737096768762,
        0,
        -0.11577230061520183,
        0.98656953978473,
        0.11522724321621737,
        0,
        -0.9932737096768762,
        -0.11522724321621737,
        -0.011402635025606234,
        0,
        0.09132370678834784,
        0.46065128954969037,
        0.2626440739840663,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/control-conduit-cable-rib-12",
        "assetId": "b01-08-inclined-cleated-belt-conveyor"
      },
      "gltfNode": 96
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/control-conduit-cable-rib-14",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.003163716898284763,
        -0.06384434868321832,
        0.9979548537066211,
        0,
        -0.06384434868321832,
        0.9959367541009284,
        0.06351284100182011,
        0,
        -0.9979548537066211,
        -0.06351284100182011,
        -0.00722696279735624,
        0,
        -0.25516861110736194,
        0.4304795440605088,
        0.2597176023931882,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/control-conduit-cable-rib-14",
        "assetId": "b01-08-inclined-cleated-belt-conveyor"
      },
      "gltfNode": 97
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/control-conduit-cable-rib-16",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.008401358530987224,
        -0.005184509369802166,
        0.9999512678313018,
        0,
        -0.005184509369802166,
        0.9999733448024656,
        0.005141064788894404,
        0,
        -0.9999512678313018,
        -0.005141064788894404,
        -0.008428013728521533,
        0,
        -0.5134411859241788,
        0.4184177014893028,
        0.2573514747718621,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/control-conduit-cable-rib-16",
        "assetId": "b01-08-inclined-cleated-belt-conveyor"
      },
      "gltfNode": 98
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/control-conduit-cable-rib-18",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.00879845765669196,
        0.09132531779589624,
        0.9957822419948761,
        0,
        0.09132531779589624,
        0.9915856530541669,
        -0.09174736501186205,
        0,
        -0.9957822419948761,
        0.09174736501186205,
        0.00038411071085886483,
        0,
        -0.691911914485902,
        0.42665191963211757,
        0.25667647912624914,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/control-conduit-cable-rib-18",
        "assetId": "b01-08-inclined-cleated-belt-conveyor"
      },
      "gltfNode": 99
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/control-conduit-cable-rib-20",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.023207646906966528,
        0.13508812828862216,
        0.9905617611842877,
        0,
        0.13508812828862216,
        0.9813176236006168,
        -0.1369924056519735,
        0,
        -0.9905617611842877,
        0.1369924056519735,
        0.004525270507583334,
        0,
        -0.859517549604379,
        0.4467854919769297,
        0.25716618184953693,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/control-conduit-cable-rib-20",
        "assetId": "b01-08-inclined-cleated-belt-conveyor"
      },
      "gltfNode": 100
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.62,
        0.78,
        0.34099999999999997,
        1
      ],
      "sourceUserData": {
        "partId": "DS_Brand_Plate",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 101
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate/badge-bezel",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate/badge-bezel",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 102
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate/badge-backing",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate/badge-backing",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 103
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate/badge-rivet-0",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.05641,
        -0.01541,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate/badge-rivet-0",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 104
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate/badge-rivet-1",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.05641,
        0.01541,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate/badge-rivet-1",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 105
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate/badge-rivet-2",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.05641,
        -0.01541,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate/badge-rivet-2",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 106
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate/badge-rivet-3",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.05641,
        0.01541,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate/badge-rivet-3",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 107
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate/badge-D",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.02668,
        0,
        0,
        0,
        0,
        0.02668,
        0,
        0,
        0,
        0,
        0.0018000000000000002,
        0,
        -0.0117392,
        0,
        0.00173,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate/badge-D",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 108
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate/badge-S",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.02668,
        0,
        0,
        0,
        0,
        0.02668,
        0,
        0,
        0,
        0,
        0.0018000000000000002,
        0,
        0.0117392,
        0,
        0.00173,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate/badge-S",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 109
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate/badge-D-back",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.02668,
        0,
        -3.267357660125138e-18,
        0,
        0,
        0.02668,
        0,
        0,
        2.204364238465236e-19,
        0,
        -0.0018000000000000002,
        0,
        0.0117392,
        0,
        -0.00173,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate/badge-D-back",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 110
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate/badge-S-back",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.02668,
        0,
        -3.267357660125138e-18,
        0,
        0,
        0.02668,
        0,
        0,
        2.204364238465236e-19,
        0,
        -0.0018000000000000002,
        0,
        -0.0117392,
        0,
        -0.00173,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/conveyor-support-structure/DS_Brand_Plate/badge-S-back",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 111
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.62,
        1.29,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "upper-discharge-pitch-assembly",
        "componentRole": "actuator",
        "BOMqty": 1
      },
      "gltfNode": 112
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/discharge-slider-bed",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.27,
        0.024,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/discharge-slider-bed",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.54,
            "height": 0.024,
            "depth": 0.48000000000000004,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 113
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/discharge-side-channel-front",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.29000000000000004,
        0,
        0.246,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/discharge-side-channel-front",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.62,
            "height": 0.112,
            "depth": 0.01,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 114
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/discharge-stainless-skirt-front",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.27,
        0.10200000000000001,
        0.236,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/discharge-stainless-skirt-front",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.5800000000000001,
            "height": 0.082,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 115
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/discharge-side-channel-rear",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.29000000000000004,
        0,
        -0.246,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/discharge-side-channel-rear",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.62,
            "height": 0.112,
            "depth": 0.01,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 116
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/discharge-stainless-skirt-rear",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.27,
        0.10200000000000001,
        -0.236,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/discharge-stainless-skirt-rear",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.5800000000000001,
            "height": 0.082,
            "depth": 0.006,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 117
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/belt-web-discharge-top",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.27,
        0.055999999999999994,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/belt-web-discharge-top",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.5800000000000001,
            "height": 0.008,
            "depth": 0.46,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 118
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/belt-web-discharge-return",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.27,
        -0.055999999999999994,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/belt-web-discharge-return",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.56,
            "height": 0.008,
            "depth": 0.46,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 119
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/belt-cleat-discharge-1",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.08,
        0.076,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/belt-cleat-discharge-1",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.032,
            "depth": 0.41600000000000004,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 120
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/belt-cleat-discharge-2",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.27,
        0.076,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/belt-cleat-discharge-2",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.032,
            "depth": 0.41600000000000004,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 121
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/belt-cleat-discharge-3",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.46,
        0.076,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/belt-cleat-discharge-3",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "belt",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.008,
            "height": 0.032,
            "depth": 0.41600000000000004,
            "radius": 0.001,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 122
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/discharge-lip-chute",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.9130889403123083,
        -0.40776045305957015,
        0,
        0,
        0.40776045305957015,
        0.9130889403123083,
        0,
        0,
        0,
        0,
        1,
        0,
        0.615,
        -0.028,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/discharge-lip-chute",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.11,
            "height": 0.008,
            "depth": 0.47200000000000003,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 123
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-pulley-rotor",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.54,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "head-pulley-rotor",
        "componentRole": "Drive_Pulley",
        "BOMqty": 1
      },
      "gltfNode": 124
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-pulley-rotor/head-pulley-lagged-drum",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-pulley-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-pulley-rotor/head-pulley-lagged-drum",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "Drive_Pulley",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.052,
            "topRadius": 0.052,
            "height": 0.452,
            "radialSegments": 28,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 125
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-pulley-rotor/head-pulley-shaft",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-pulley-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0.008,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-pulley-rotor/head-pulley-shaft",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "shaft",
        "BOMqty": 1
      },
      "gltfNode": 126
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-pulley-rotor/head-pulley-front-hub-key",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-pulley-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.242,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-pulley-rotor/head-pulley-front-hub-key",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "Drive_Pulley",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.072,
            "height": 0.016,
            "depth": 0.01,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 127
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.54,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "head-gearmotor-unit",
        "componentRole": "motor",
        "BOMqty": 1
      },
      "gltfNode": 128
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit/gearmotor-hollow-housing",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.32,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit/gearmotor-hollow-housing",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "motor",
        "BOMqty": 1,
        "hollowQuillBoreDiameterM": 0.038
      },
      "gltfNode": 129
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit/gearmotor-torque-arm",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.065,
        -0.02,
        -0.275,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit/gearmotor-torque-arm",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.13,
            "height": 0.034,
            "depth": 0.016,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 130
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit/gearmotor-stator-body",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.125,
        -0.32,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit/gearmotor-stator-body",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "motor",
        "BOMqty": 1
      },
      "gltfNode": 131
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit/gearmotor-terminal-box",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.052,
        0.135,
        -0.32,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit/gearmotor-terminal-box",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.058,
            "height": 0.056,
            "depth": 0.048,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 132
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit/motor-stator-fin-1",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.056,
        0.125,
        -0.32,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit/motor-stator-fin-1",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.005,
            "height": 0.14,
            "depth": 0.014,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 133
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit/motor-stator-fin-2",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5000000000000001,
        0,
        0.8660254037844386,
        0,
        0,
        1,
        0,
        0,
        -0.8660254037844386,
        0,
        0.5000000000000001,
        0,
        0.028000000000000008,
        0.125,
        -0.27150257738807143,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit/motor-stator-fin-2",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.005,
            "height": 0.14,
            "depth": 0.014,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 134
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit/motor-stator-fin-3",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.4999999999999998,
        0,
        0.8660254037844388,
        0,
        0,
        1,
        0,
        0,
        -0.8660254037844388,
        0,
        -0.4999999999999998,
        0,
        -0.027999999999999987,
        0.125,
        -0.27150257738807143,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit/motor-stator-fin-3",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.005,
            "height": 0.14,
            "depth": 0.014,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 135
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit/motor-stator-fin-4",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -1,
        0,
        1.2246467991473532e-16,
        0,
        0,
        1,
        0,
        0,
        -1.2246467991473532e-16,
        0,
        -1,
        0,
        -0.056,
        0.125,
        -0.32,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit/motor-stator-fin-4",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.005,
            "height": 0.14,
            "depth": 0.014,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 136
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit/motor-stator-fin-5",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.5000000000000002,
        0,
        -0.8660254037844384,
        0,
        0,
        1,
        0,
        0,
        0.8660254037844384,
        0,
        -0.5000000000000002,
        0,
        -0.028000000000000025,
        0.125,
        -0.3684974226119286,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit/motor-stator-fin-5",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.005,
            "height": 0.14,
            "depth": 0.014,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 137
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit/motor-stator-fin-6",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.5000000000000001,
        0,
        -0.8660254037844386,
        0,
        0,
        1,
        0,
        0,
        0.8660254037844386,
        0,
        0.5000000000000001,
        0,
        0.028000000000000008,
        0.125,
        -0.3684974226119286,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/head-gearmotor-unit/motor-stator-fin-6",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.005,
            "height": 0.14,
            "depth": 0.014,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 138
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/motor-fan-rotor",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.54,
        0.222,
        -0.32,
        1
      ],
      "sourceUserData": {
        "partId": "motor-fan-rotor",
        "componentRole": "motor",
        "BOMqty": 1
      },
      "gltfNode": 139
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/motor-fan-rotor/motor-cooling-hub",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/motor-fan-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/motor-fan-rotor/motor-cooling-hub",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.038,
            "topRadius": 0.038,
            "height": 0.016,
            "radialSegments": 12,
            "chamfer": 0.00064
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 140
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/motor-fan-rotor/motor-cooling-blade-a",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/motor-fan-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/motor-fan-rotor/motor-cooling-blade-a",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.088,
            "height": 0.008,
            "depth": 0.012,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 141
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/motor-fan-rotor/motor-cooling-blade-b",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/motor-fan-rotor",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/motor-fan-rotor/motor-cooling-blade-b",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.008,
            "depth": 0.088,
            "radius": 0.001,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 142
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/discharge-photo-sensor-head",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.48500000000000004,
        0.138,
        0.258,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/discharge-photo-sensor-head",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "sensor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.028,
            "height": 0.026,
            "depth": 0.02,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 143
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/discharge-photo-sensor-led",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.48500000000000004,
        0.152,
        0.258,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/discharge-photo-sensor-led",
        "assetId": "b01-08-inclined-cleated-belt-conveyor",
        "componentRole": "sensor",
        "BOMqty": 1
      },
      "gltfNode": 144
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly/b01-08-inclined-cleated-belt-conveyor:outfeed",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/upper-discharge-pitch-assembly",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.6,
        0.06,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor:outfeed",
        "componentRole": "frame",
        "BOMqty": 1,
        "meaning": "upper nose-over discharge exit point (y = 1.350 m at incline_pitch = 0)"
      },
      "gltfNode": 145
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/b01-08-inclined-cleated-belt-conveyor:infeed",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.22,
        0.45,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor:infeed",
        "componentRole": "frame",
        "BOMqty": 1,
        "meaning": "horizontal lower infeed entry point at y = 0.450 m"
      },
      "gltfNode": 146
    },
    {
      "id": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base/b01-08-inclined-cleated-belt-conveyor:work",
      "parent": "b01-08-inclined-cleated-belt-conveyor/b01-08-inclined-cleated-belt-conveyor:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.9,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "b01-08-inclined-cleated-belt-conveyor:work",
        "componentRole": "frame",
        "BOMqty": 1,
        "meaning": "midpoint of inclined cleated climb section at y = 0.900 m"
      },
      "gltfNode": 147
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "B01-08 패킷 설계 지침(Z형 수평 투입 y=0.45m -> 클리트 경사 상승 -> 수평 토출 y=1.35m, 스테인리스 측면 스커트, 상부 중공축 기어드모터, 4코너 관통 볼트 구멍 앵커 풋플레이트, 관절 belt_drive·incline_pitch, 일체형 DS_Brand_Plate)에 따른 자체 설계."
    }
  ],
  "rights": {
    "id": "b01-08-inclined-cleated-belt-conveyor",
    "assetTypeId": "b01-08-inclined-cleated-belt-conveyor",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:b3038c08c3a7cfc594b52a1daf0e0684ba3ff37ea629248e03f8125ee79c4d1c",
    "modelSource": "kit/models/b01-08-inclined-cleated-belt-conveyor.mjs",
    "dslExampleSource": "dsl/models/b01-08-inclined-cleated-belt-conveyor.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/b01-08-inclined-cleated-belt-conveyor.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/b01-08-inclined-cleated-belt-conveyor.txt",
      "sha256": "sha256:ff0c899d6b7cab6c140844a35c94d9d0ab10c362f4dc59cbb0a7611a142bcbf0",
      "bytes": 819
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/b01-08-inclined-cleated-belt-conveyor/model.glb",
      "bytes": 1217840,
      "sha256": "sha256:f147891892ac364ca153d82b7bac241e549243778efe5131fd3131771fa928b3"
    },
    "licenses": [
      {
        "path": "open-assets/b01-08-inclined-cleated-belt-conveyor/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/b01-08-inclined-cleated-belt-conveyor/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/b01-08-inclined-cleated-belt-conveyor/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/b01-08-inclined-cleated-belt-conveyor/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/b01-08-inclined-cleated-belt-conveyor/LICENSES/ASSET-NOTICES/b01-08-inclined-cleated-belt-conveyor.txt",
        "bytes": 819,
        "sha256": "sha256:ff0c899d6b7cab6c140844a35c94d9d0ab10c362f4dc59cbb0a7611a142bcbf0"
      }
    ],
    "source": {
      "path": "kit/models/b01-08-inclined-cleated-belt-conveyor.mjs",
      "bytes": 24523,
      "sha256": "sha256:b3038c08c3a7cfc594b52a1daf0e0684ba3ff37ea629248e03f8125ee79c4d1c"
    },
    "ds2": {
      "path": "dsl/models/b01-08-inclined-cleated-belt-conveyor.ds2",
      "bytes": 2823,
      "sha256": "sha256:c1ab60cc9b9022699361a87fe5a9e57a247b13387589f86a0585419b731a4920",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 148,
    "triangles": 77540,
    "maxMatrixError": 4.163336342344337e-16,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 11,
    "nodeComparisons": 1628,
    "semanticFrameComparisons": 44,
    "acceptanceCases": 4,
    "acceptanceFrameComparisons": 16,
    "maxMotionMatrixError": 4.163336342344337e-16
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "b01-08-inclined-cleated-belt-conveyor",
    "kind": "transport",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "B 이송 물류와 포장 / B01 연속 이송",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "infeed": {
        "frameId": "infeed",
        "portClass": "material-flow",
        "direction": "input",
        "quaternion": [
          0,
          1,
          0,
          0
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            -1.22,
            0.45,
            0
          ],
          "quaternion": [
            0,
            1,
            0,
            0
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "outfeed": {
        "frameId": "outfeed",
        "portClass": "material-flow",
        "direction": "output",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            1.22,
            1.35,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "work": {
        "frameId": "work",
        "portClass": "process",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0.9,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
