{
  "schema": "lib3d-open-asset/1",
  "generatorVersion": "1.1.1",
  "id": "a07-08-wire-edm",
  "assetTypeId": "a07-08-wire-edm",
  "label": "와이어 방전가공기",
  "category": "A 공통 자동화와 가공",
  "description": "C형 컬럼·상부 암 Z 램(실제 와이어 보어)·U/V 테이퍼 슬라이드·상하 가이드 노즐, 가공조 안 XY 크로스 테이블과 개구 작업대, 하강식 전면 벽, 보빈→텐션 롤러→풀리→가이드→회수함 정적 와이어 경로, 유전액 탱크·필터·호스, 제어반을 갖춘 와이어 방전가공기 표시 모델.",
  "coordinateProfile": "lib3d-world/1",
  "units": {
    "length": "m",
    "angle": "rad"
  },
  "upAxis": "Y",
  "handedness": "right",
  "bounds": {
    "min": [
      -1.3,
      -3.725290284584126e-10,
      -1.1000000029802321
    ],
    "max": [
      1.400000011920929,
      2.004999997615814,
      0.5719999996647239
    ]
  },
  "size": [
    2.7000000119209293,
    2.0049999979883433,
    1.672000002644956
  ],
  "boundsScope": "INITIAL_SDK_WORLD_AABB_NOT_MANUFACTURER_RATED_REACH",
  "quality": "studio",
  "geometryQuality": {
    "schema": "lib3d-manufacturing-geometry-quality/1",
    "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
    "enabled": true,
    "counts": {
      "filletedBoxes": 78,
      "explicitBoxFillets": 0,
      "chamferedCylinders": 22,
      "blindSocketHeads": 0,
      "openTSlotProfiles": 0
    },
    "protectedPrimitives": 26,
    "warnings": [],
    "changedMeshes": 100,
    "adaptiveStudio": {
      "schema": "lib3d-adaptive-studio-fillets/1",
      "policy": "small-radius-first-sdk-curvature-only",
      "targetTriangles": 80000,
      "beforeTriangles": 95184,
      "afterTriangles": 83088,
      "reachedTarget": false,
      "changedMeshes": 18,
      "changes": [
        {
          "meshes": [
            "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-1",
            "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-2",
            "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-3",
            "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-4",
            "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-5",
            "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-6"
          ],
          "radiusM": 0.002,
          "dimensionsM": [
            0.03,
            0.022,
            0.008
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/z-carriage-block-1",
            "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/z-carriage-block-2",
            "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/z-carriage-block-3",
            "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/z-carriage-block-4"
          ],
          "radiusM": 0.002,
          "dimensionsM": [
            0.03,
            0.05,
            0.018
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/top-pulley-cheek-left",
            "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/top-pulley-cheek-right"
          ],
          "radiusM": 0.002,
          "dimensionsM": [
            0.006,
            0.09,
            0.09
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/y-rail-1",
            "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/y-rail-2"
          ],
          "radiusM": 0.002,
          "dimensionsM": [
            0.025,
            0.025,
            0.92
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-rail-1",
            "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-rail-2"
          ],
          "radiusM": 0.002,
          "dimensionsM": [
            0.016,
            0.48,
            0.012
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        },
        {
          "meshes": [
            "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-screw-bearing-lower",
            "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-screw-bearing-upper"
          ],
          "radiusM": 0.002,
          "dimensionsM": [
            0.024,
            0.03,
            0.09
          ],
          "beforeSegments": 4,
          "afterSegments": 2,
          "beforeTrianglesPerMesh": 972,
          "afterTrianglesPerMesh": 300
        }
      ],
      "preserved": [
        "analytic radius",
        "outer envelope",
        "functional geometry",
        "custom geometry",
        "declared precision faces",
        "frames and joints"
      ],
      "unreachedReason": "Source/custom/protected geometry retained; no further geometry is simplified to force the target"
    }
  },
  "source": {
    "path": "kit/models/a07-08-wire-edm.mjs",
    "sourceSha256": "sha256:73f824b6747405914ba1dd8666edabd90b458098e26ce121e6f725ee53893354",
    "deliverySha256": "sha256:73f824b6747405914ba1dd8666edabd90b458098e26ce121e6f725ee53893354",
    "providerId": "dualsoft-public",
    "releaseVersion": "2026.11.15",
    "packageId": "sha256:01448cbfc464828bdf23d44f42adfed7858bb710c8209944b72a75b6b2ce5bec",
    "sdkVersion": "1.1.0"
  },
  "providerId": "dualsoft-public",
  "releaseVersion": "2026.11.15",
  "packageId": "sha256:01448cbfc464828bdf23d44f42adfed7858bb710c8209944b72a75b6b2ce5bec",
  "sdkVersion": "1.1.0",
  "requiredAdapters": [],
  "parameters": [],
  "parameterValues": {},
  "joints": [
    {
      "id": "x",
      "label": "XY 테이블 X 이송",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "unit": "m",
      "min": -0.2,
      "max": 0.2,
      "initial": 0
    },
    {
      "id": "y",
      "label": "XY 테이블 Y 이송(새들 전후)",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "unit": "m",
      "min": -0.15,
      "max": 0.15,
      "initial": 0
    },
    {
      "id": "z",
      "label": "상부 헤드 Z 승강",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "unit": "m",
      "min": 0,
      "max": 0.25,
      "initial": 0.06
    },
    {
      "id": "u",
      "label": "상부 가이드 테이퍼 U",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "unit": "m",
      "min": -0.03,
      "max": 0.03,
      "initial": 0
    },
    {
      "id": "v",
      "label": "상부 가이드 테이퍼 V",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "unit": "m",
      "min": -0.03,
      "max": 0.03,
      "initial": 0
    },
    {
      "id": "tank",
      "label": "가공조 전면 벽 하강(개방)",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "unit": "m",
      "min": 0,
      "max": 0.25,
      "initial": 0
    }
  ],
  "initialState": {
    "x": 0,
    "y": 0,
    "z": 0.06,
    "u": 0,
    "v": 0,
    "tank": 0
  },
  "bindings": [
    {
      "id": "x",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0.096,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table",
      "gltfNode": 118
    },
    {
      "id": "y",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0.716,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle",
      "gltfNode": 104
    },
    {
      "id": "z",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        1.175,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram",
      "gltfNode": 135
    },
    {
      "id": "u",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        -0.035,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide",
      "gltfNode": 147
    },
    {
      "id": "v",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        -0.016,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide/v-slide",
      "gltfNode": 149
    },
    {
      "id": "tank",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "zeroPosition": [
        0,
        1.3,
        0.532
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/tank-front-wall",
      "gltfNode": 98
    }
  ],
  "jointBindings": [
    {
      "id": "x",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        0.096,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table",
      "gltfNode": 118
    },
    {
      "id": "y",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        0.716,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle",
      "gltfNode": 104
    },
    {
      "id": "z",
      "kind": "prismatic",
      "axis": [
        0,
        1,
        0
      ],
      "zeroPosition": [
        0,
        1.175,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram",
      "gltfNode": 135
    },
    {
      "id": "u",
      "kind": "prismatic",
      "axis": [
        1,
        0,
        0
      ],
      "zeroPosition": [
        0,
        -0.035,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide",
      "gltfNode": 147
    },
    {
      "id": "v",
      "kind": "prismatic",
      "axis": [
        0,
        0,
        1
      ],
      "zeroPosition": [
        0,
        -0.016,
        0
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide/v-slide",
      "gltfNode": 149
    },
    {
      "id": "tank",
      "kind": "prismatic",
      "axis": [
        0,
        -1,
        0
      ],
      "zeroPosition": [
        0,
        1.3,
        0.532
      ],
      "zeroQuaternion": [
        0,
        0,
        0,
        1
      ],
      "multiplier": 1,
      "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/tank-front-wall",
      "gltfNode": 98
    }
  ],
  "frames": {
    "base": {
      "id": "base",
      "node": "a07-08-wire-edm/a07-08-wire-edm:base",
      "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base",
      "gltfNode": 1,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "position": [
        0,
        0,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "work-table": {
      "id": "work-table",
      "node": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/a07-08-wire-edm:work-table",
      "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/a07-08-wire-edm:work-table",
      "gltfNode": 134,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1,
        0,
        1
      ],
      "position": [
        0,
        1,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "upper-guide": {
      "id": "upper-guide",
      "node": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide/v-slide/a07-08-wire-edm:upper-guide",
      "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide/v-slide/a07-08-wire-edm:upper-guide",
      "gltfNode": 152,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.1,
        0,
        1
      ],
      "position": [
        0,
        1.1,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "lower-guide": {
      "id": "lower-guide",
      "node": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/a07-08-wire-edm:lower-guide",
      "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/a07-08-wire-edm:lower-guide",
      "gltfNode": 85,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.996,
        0,
        1
      ],
      "position": [
        0,
        0.996,
        0
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "load-opening": {
      "id": "load-opening",
      "node": "a07-08-wire-edm/a07-08-wire-edm:base/tank-front-wall/a07-08-wire-edm:load-opening",
      "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/tank-front-wall/a07-08-wire-edm:load-opening",
      "gltfNode": 103,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.3,
        0.542,
        1
      ],
      "position": [
        0,
        1.3,
        0.542
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    },
    "wire-bobbin": {
      "id": "wire-bobbin",
      "node": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/a07-08-wire-edm:wire-bobbin",
      "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/a07-08-wire-edm:wire-bobbin",
      "gltfNode": 86,
      "matrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.2,
        1.76,
        -0.465,
        1
      ],
      "position": [
        -0.2,
        1.76,
        -0.465
      ],
      "quaternion": [
        0,
        0,
        0,
        1
      ]
    }
  },
  "ports": {
    "mount": "base",
    "work": "work-table"
  },
  "nodes": [
    {
      "id": "a07-08-wire-edm",
      "parent": null,
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "assetId": "a07-08-wire-edm",
        "concept": true,
        "manufacturerCad": false,
        "lod": "studio",
        "units": "m",
        "upAxis": "Y",
        "runtimeControl": false,
        "geometryQuality": {
          "schema": "lib3d-manufacturing-geometry-quality/1",
          "scope": "ORIGINAL_DESIGN_GEOMETRIC_DETAIL_NOT_MANUFACTURER_SPEC",
          "enabled": true,
          "counts": {
            "filletedBoxes": 78,
            "explicitBoxFillets": 0,
            "chamferedCylinders": 22,
            "blindSocketHeads": 0,
            "openTSlotProfiles": 0
          },
          "protectedPrimitives": 26,
          "warnings": [],
          "changedMeshes": 100,
          "adaptiveStudio": {
            "schema": "lib3d-adaptive-studio-fillets/1",
            "policy": "small-radius-first-sdk-curvature-only",
            "targetTriangles": 80000,
            "beforeTriangles": 95184,
            "afterTriangles": 83088,
            "reachedTarget": false,
            "changedMeshes": 18,
            "changes": [
              {
                "meshes": [
                  "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-1",
                  "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-2",
                  "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-3",
                  "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-4",
                  "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-5",
                  "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-6"
                ],
                "radiusM": 0.002,
                "dimensionsM": [
                  0.03,
                  0.022,
                  0.008
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/z-carriage-block-1",
                  "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/z-carriage-block-2",
                  "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/z-carriage-block-3",
                  "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/z-carriage-block-4"
                ],
                "radiusM": 0.002,
                "dimensionsM": [
                  0.03,
                  0.05,
                  0.018
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/top-pulley-cheek-left",
                  "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/top-pulley-cheek-right"
                ],
                "radiusM": 0.002,
                "dimensionsM": [
                  0.006,
                  0.09,
                  0.09
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/y-rail-1",
                  "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/y-rail-2"
                ],
                "radiusM": 0.002,
                "dimensionsM": [
                  0.025,
                  0.025,
                  0.92
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-rail-1",
                  "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-rail-2"
                ],
                "radiusM": 0.002,
                "dimensionsM": [
                  0.016,
                  0.48,
                  0.012
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              },
              {
                "meshes": [
                  "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-screw-bearing-lower",
                  "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-screw-bearing-upper"
                ],
                "radiusM": 0.002,
                "dimensionsM": [
                  0.024,
                  0.03,
                  0.09
                ],
                "beforeSegments": 4,
                "afterSegments": 2,
                "beforeTrianglesPerMesh": 972,
                "afterTrianglesPerMesh": 300
              }
            ],
            "preserved": [
              "analytic radius",
              "outer envelope",
              "functional geometry",
              "custom geometry",
              "declared precision faces",
              "frames and joints"
            ],
            "unreachedReason": "Source/custom/protected geometry retained; no further geometry is simplified to force the target"
          }
        },
        "definition": {
          "protocol": "lib3d-authoring-plugin/1",
          "asset_type_id": "a07-08-wire-edm",
          "coordinate_profile": "lib3d-world/1",
          "label": "와이어 방전가공기",
          "category": "A 공통 자동화와 가공 / A07 범용 가공기",
          "summary": "C형 컬럼·상부 암 Z 램(실제 와이어 보어)·U/V 테이퍼 슬라이드·상하 가이드 노즐, 가공조 안 XY 크로스 테이블과 개구 작업대, 하강식 전면 벽, 보빈→텐션 롤러→풀리→가이드→회수함 정적 와이어 경로, 유전액 탱크·필터·호스, 제어반을 갖춘 와이어 방전가공기 표시 모델.",
          "scope": "ORIGINAL_DESIGN_DISPLAY_MODEL",
          "parameters": [],
          "joints": [
            {
              "id": "x",
              "label": "XY 테이블 X 이송",
              "kind": "prismatic",
              "axis": [
                1,
                0,
                0
              ],
              "unit": "m",
              "min": -0.2,
              "max": 0.2,
              "initial": 0
            },
            {
              "id": "y",
              "label": "XY 테이블 Y 이송(새들 전후)",
              "kind": "prismatic",
              "axis": [
                0,
                0,
                1
              ],
              "unit": "m",
              "min": -0.15,
              "max": 0.15,
              "initial": 0
            },
            {
              "id": "z",
              "label": "상부 헤드 Z 승강",
              "kind": "prismatic",
              "axis": [
                0,
                1,
                0
              ],
              "unit": "m",
              "min": 0,
              "max": 0.25,
              "initial": 0.06
            },
            {
              "id": "u",
              "label": "상부 가이드 테이퍼 U",
              "kind": "prismatic",
              "axis": [
                1,
                0,
                0
              ],
              "unit": "m",
              "min": -0.03,
              "max": 0.03,
              "initial": 0
            },
            {
              "id": "v",
              "label": "상부 가이드 테이퍼 V",
              "kind": "prismatic",
              "axis": [
                0,
                0,
                1
              ],
              "unit": "m",
              "min": -0.03,
              "max": 0.03,
              "initial": 0
            },
            {
              "id": "tank",
              "label": "가공조 전면 벽 하강(개방)",
              "kind": "prismatic",
              "axis": [
                0,
                -1,
                0
              ],
              "unit": "m",
              "min": 0,
              "max": 0.25,
              "initial": 0
            }
          ],
          "ports": {
            "mount": "base",
            "work": "work-table"
          },
          "required_host_features": [
            "prismatic"
          ],
          "source_evidence": [
            {
              "origin": "ORIGINAL_DESIGN",
              "basis": "A07-08 설계 지침(베드+가공조 전면 벽 tank 하강, XY 테이블 x/y 중첩, 상부 암+헤드 z, 상부 가이드 테이퍼 u/v, 보빈→텐션 롤러→상부 가이드→하부 가이드→회수 정적 와이어 경로, 유전액 탱크·필터 박스·호스, 제어반, 프레임 base·upper-guide·lower-guide·work-table, 포트 mount·work)에 따른 자체 설계. 치수는 X400×Y300×Z250 급 비례의 자체 설계값."
            },
            {
              "origin": "PRINCIPLE_REFERENCE",
              "title": "S30 DMG MORI — Machine tools (machining centers, turning, EDM, grinding)",
              "url": "https://www.dmgmori.com/",
              "basis": "제품군 분류 참고; 열람하지 않음"
            }
          ],
          "sdk_version": "1.1.0"
        },
        "parameters": {},
        "coordinate_profile": "lib3d-world/1",
        "sdk_version": "1.1.0",
        "frameNames": {
          "base": "a07-08-wire-edm/a07-08-wire-edm:base",
          "work-table": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/a07-08-wire-edm:work-table",
          "upper-guide": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide/v-slide/a07-08-wire-edm:upper-guide",
          "lower-guide": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/a07-08-wire-edm:lower-guide",
          "load-opening": "a07-08-wire-edm/a07-08-wire-edm:base/tank-front-wall/a07-08-wire-edm:load-opening",
          "wire-bobbin": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/a07-08-wire-edm:wire-bobbin"
        },
        "jointBindings": [
          {
            "id": "x",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              0,
              0.096,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table"
          },
          {
            "id": "y",
            "kind": "prismatic",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0,
              0.716,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle"
          },
          {
            "id": "z",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "zeroPosition": [
              0,
              1.175,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram"
          },
          {
            "id": "u",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "zeroPosition": [
              0,
              -0.035,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide"
          },
          {
            "id": "v",
            "kind": "prismatic",
            "axis": [
              0,
              0,
              1
            ],
            "zeroPosition": [
              0,
              -0.016,
              0
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide/v-slide"
          },
          {
            "id": "tank",
            "kind": "prismatic",
            "axis": [
              0,
              -1,
              0
            ],
            "zeroPosition": [
              0,
              1.3,
              0.532
            ],
            "zeroQuaternion": [
              0,
              0,
              0,
              1
            ],
            "multiplier": 1,
            "nodeName": "a07-08-wire-edm/a07-08-wire-edm:base/tank-front-wall"
          }
        ],
        "joints": [
          {
            "id": "x",
            "label": "XY 테이블 X 이송",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "unit": "m",
            "min": -0.2,
            "max": 0.2,
            "initial": 0,
            "value": 0
          },
          {
            "id": "y",
            "label": "XY 테이블 Y 이송(새들 전후)",
            "kind": "prismatic",
            "axis": [
              0,
              0,
              1
            ],
            "unit": "m",
            "min": -0.15,
            "max": 0.15,
            "initial": 0,
            "value": 0
          },
          {
            "id": "z",
            "label": "상부 헤드 Z 승강",
            "kind": "prismatic",
            "axis": [
              0,
              1,
              0
            ],
            "unit": "m",
            "min": 0,
            "max": 0.25,
            "initial": 0.06,
            "value": 0.06
          },
          {
            "id": "u",
            "label": "상부 가이드 테이퍼 U",
            "kind": "prismatic",
            "axis": [
              1,
              0,
              0
            ],
            "unit": "m",
            "min": -0.03,
            "max": 0.03,
            "initial": 0,
            "value": 0
          },
          {
            "id": "v",
            "label": "상부 가이드 테이퍼 V",
            "kind": "prismatic",
            "axis": [
              0,
              0,
              1
            ],
            "unit": "m",
            "min": -0.03,
            "max": 0.03,
            "initial": 0,
            "value": 0
          },
          {
            "id": "tank",
            "label": "가공조 전면 벽 하강(개방)",
            "kind": "prismatic",
            "axis": [
              0,
              -1,
              0
            ],
            "unit": "m",
            "min": 0,
            "max": 0.25,
            "initial": 0,
            "value": 0
          }
        ],
        "cleanup": {
          "removedDegenerateTriangles": 0,
          "removedDuplicateTriangles": 0,
          "preservedAttributeOverlaps": 0,
          "uniqueGeometries": 108
        },
        "provenance": [
          {
            "origin": "ORIGINAL_DESIGN",
            "basis": "A07-08 설계 지침(베드+가공조 전면 벽 tank 하강, XY 테이블 x/y 중첩, 상부 암+헤드 z, 상부 가이드 테이퍼 u/v, 보빈→텐션 롤러→상부 가이드→하부 가이드→회수 정적 와이어 경로, 유전액 탱크·필터 박스·호스, 제어반, 프레임 base·upper-guide·lower-guide·work-table, 포트 mount·work)에 따른 자체 설계. 치수는 X400×Y300×Z250 급 비례의 자체 설계값."
          },
          {
            "origin": "PRINCIPLE_REFERENCE",
            "title": "S30 DMG MORI — Machine tools (machining centers, turning, EDM, grinding)",
            "url": "https://www.dmgmori.com/",
            "basis": "제품군 분류 참고; 열람하지 않음"
          }
        ],
        "publisher": "lib3d-authoring-sdk/1",
        "state": {
          "x": 0,
          "y": 0,
          "z": 0.06,
          "u": 0,
          "v": 0,
          "tank": 0
        }
      },
      "gltfNode": 0
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base",
      "parent": "a07-08-wire-edm",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm:base",
        "componentRole": "frame",
        "BOMqty": 1,
        "referencePlane": "floor y=0 below the vertical wire axis (x=0, z=0)"
      },
      "gltfNode": 1
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "machine-frame",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 2
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/bed-casting",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.37,
        -0.215,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/bed-casting",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.36,
            "height": 0.62,
            "depth": 1.47,
            "radius": 0.008,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 3
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/leveling-foot-1",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.58,
        0.03,
        0.42,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/leveling-foot-1",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 4
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/leveling-foot-2",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.58,
        0.03,
        0.42,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/leveling-foot-2",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 5
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/leveling-foot-3",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.58,
        0.03,
        -0.21,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/leveling-foot-3",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 6
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/leveling-foot-4",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.58,
        0.03,
        -0.21,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/leveling-foot-4",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 7
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/leveling-foot-5",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.58,
        0.03,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/leveling-foot-5",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 8
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/leveling-foot-6",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.58,
        0.03,
        -0.85,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/leveling-foot-6",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 9
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/column",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.32,
        -0.775,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/column",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.64,
            "height": 1.28,
            "depth": 0.35,
            "radius": 0.01,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 10
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/upper-arm",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.51,
        -0.36,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/upper-arm",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.28,
            "height": 0.22,
            "depth": 0.48,
            "radius": 0.01,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 11
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-head-plate",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.61,
        -0.11,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-head-plate",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.26,
            "height": 0.5,
            "depth": 0.02,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 12
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/lower-arm",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.91,
        -0.2775,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/lower-arm",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.096,
            "depth": 0.645,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 13
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/cable-duct",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.74,
        0.025,
        -0.3,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/cable-duct",
        "assetId": "a07-08-wire-edm",
        "componentRole": "cable",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.12,
            "height": 0.05,
            "depth": 0.1,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 14
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/column-rib-left",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.335,
        1.2,
        -0.775,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/column-rib-left",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.03,
            "height": 1,
            "depth": 0.25,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 15
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/column-rib-right",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.335,
        1.2,
        -0.775,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/column-rib-right",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.03,
            "height": 1,
            "depth": 0.25,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 16
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/upper-arm-flange",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.51,
        -0.59,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/upper-arm-flange",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.34,
            "height": 0.28,
            "depth": 0.02,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 17
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/upper-arm-gusset",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.35,
        -0.565,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/upper-arm-gusset",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.2,
            "height": 0.1,
            "depth": 0.07,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 18
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/upper-arm-bolt-1",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.155,
        1.39,
        -0.576,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/upper-arm-bolt-1",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 19
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/upper-arm-bolt-2",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.155,
        1.39,
        -0.576,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/upper-arm-bolt-2",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 20
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/upper-arm-bolt-3",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.155,
        1.51,
        -0.576,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/upper-arm-bolt-3",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 21
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/upper-arm-bolt-4",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.155,
        1.51,
        -0.576,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/upper-arm-bolt-4",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 22
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/upper-arm-bolt-5",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.155,
        1.63,
        -0.576,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/upper-arm-bolt-5",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 23
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/upper-arm-bolt-6",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.155,
        1.63,
        -0.576,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/upper-arm-bolt-6",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 24
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/head-plate-bolt-1",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.115,
        1.38,
        -0.097,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/head-plate-bolt-1",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 25
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/head-plate-bolt-2",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.115,
        1.38,
        -0.097,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/head-plate-bolt-2",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 26
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/head-plate-bolt-3",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.115,
        1.84,
        -0.097,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/head-plate-bolt-3",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 27
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/head-plate-bolt-4",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.115,
        1.84,
        -0.097,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/head-plate-bolt-4",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fastener",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 28
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/y-rail-1",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.24,
        0.6925,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/y-rail-1",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.025,
            "height": 0.025,
            "depth": 0.92,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 29
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/y-rail-2",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.24,
        0.6925,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/y-rail-2",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.025,
            "height": 0.025,
            "depth": 0.92,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 30
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/y-ballscrew",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0.7,
        -0.025,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/y-ballscrew",
        "assetId": "a07-08-wire-edm",
        "componentRole": "transmission",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.01,
            "topRadius": 0.01,
            "height": 0.85,
            "radialSegments": 40,
            "chamfer": 0.00035000000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 31
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/y-screw-bearing-rear",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.697,
        -0.465,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/y-screw-bearing-rear",
        "assetId": "a07-08-wire-edm",
        "componentRole": "bearing",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.06,
            "height": 0.034,
            "depth": 0.03,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 32
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/y-screw-bearing-front",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.697,
        0.408,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/y-screw-bearing-front",
        "assetId": "a07-08-wire-edm",
        "componentRole": "bearing",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.06,
            "height": 0.034,
            "depth": 0.012,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 33
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/y-servo-motor",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.716,
        0.465,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/y-servo-motor",
        "assetId": "a07-08-wire-edm",
        "componentRole": "motor",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.07,
            "depth": 0.1,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 34
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/lower-guide-nozzle",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/lower-guide-nozzle",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1,
        "boreRadiusM": 0.003
      },
      "gltfNode": 35
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/lower-flush-port",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.065,
        0.93,
        0.015,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/lower-flush-port",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fitting",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.01,
            "topRadius": 0.01,
            "height": 0.03,
            "radialSegments": 40,
            "chamfer": 0.00035000000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 36
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-rail-1",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.045,
        1.61,
        -0.094,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-rail-1",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.016,
            "height": 0.48,
            "depth": 0.012,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 37
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-rail-2",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.045,
        1.61,
        -0.094,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-rail-2",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.016,
            "height": 0.48,
            "depth": 0.012,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 38
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-ballscrew",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.1,
        1.645,
        -0.04,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-ballscrew",
        "assetId": "a07-08-wire-edm",
        "componentRole": "transmission",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.01,
            "topRadius": 0.01,
            "height": 0.39,
            "radialSegments": 40,
            "chamfer": 0.00035000000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 39
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-screw-bearing-lower",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.1,
        1.435,
        -0.055,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-screw-bearing-lower",
        "assetId": "a07-08-wire-edm",
        "componentRole": "bearing",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.03,
            "depth": 0.09,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 40
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-screw-bearing-upper",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.1,
        1.855,
        -0.055,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-screw-bearing-upper",
        "assetId": "a07-08-wire-edm",
        "componentRole": "bearing",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.024,
            "height": 0.03,
            "depth": 0.09,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 41
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-motor-flange",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.1,
        1.875,
        -0.04,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-motor-flange",
        "assetId": "a07-08-wire-edm",
        "componentRole": "motor",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.07,
            "height": 0.012,
            "depth": 0.07,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 42
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-servo-motor",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.1,
        1.94,
        -0.04,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/z-servo-motor",
        "assetId": "a07-08-wire-edm",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.032,
            "topRadius": 0.032,
            "height": 0.13,
            "radialSegments": 40,
            "chamfer": 0.0011200000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 43
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/bobbin-spindle",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.2,
        1.76,
        -0.535,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/bobbin-spindle",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 44
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/bobbin-wire-coil",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.2,
        1.76,
        -0.53,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/bobbin-wire-coil",
        "assetId": "a07-08-wire-edm",
        "componentRole": "consumable",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.07,
            "topRadius": 0.07,
            "height": 0.09,
            "radialSegments": 40,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 45
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/bobbin-flange-rear",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.2,
        1.76,
        -0.58,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/bobbin-flange-rear",
        "assetId": "a07-08-wire-edm",
        "componentRole": "consumable",
        "BOMqty": 1
      },
      "gltfNode": 46
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/bobbin-flange-front",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.2,
        1.76,
        -0.48,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/bobbin-flange-front",
        "assetId": "a07-08-wire-edm",
        "componentRole": "consumable",
        "BOMqty": 1
      },
      "gltfNode": 47
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/bobbin-lock-nut",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.2,
        1.76,
        -0.47,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/bobbin-lock-nut",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 48
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/tension-roller",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.1,
        1.91,
        -0.53,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/tension-roller",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 0,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 49
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/tension-brake-motor",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.1,
        1.91,
        -0.57,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/tension-brake-motor",
        "assetId": "a07-08-wire-edm",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.035,
            "topRadius": 0.035,
            "height": 0.05,
            "radialSegments": 40,
            "chamfer": 0.0012250000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 50
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/tension-roller-shaft",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.1,
        1.91,
        -0.535,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/tension-roller-shaft",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1,
        "surfaceStability": {
          "schema": "lib3d-surface-stability/1",
          "rank": 1,
          "scope": "CURRENT_POSE_UNION_RENDER_ONLY",
          "poseRevision": 1,
          "viewDepthOffsetMeters": 0.00001,
          "viewDepthCompatibility": "MODEL_VIEW_MATRIX"
        }
      },
      "gltfNode": 51
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/guide-pulley-bracket",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.02,
        1.92,
        -0.535,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/guide-pulley-bracket",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.08,
            "height": 0.01,
            "depth": 0.13,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 52
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/guide-pulley",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.03,
        1.94,
        -0.5,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/guide-pulley",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 53
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/guide-pulley-pin",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.03,
        1.9375,
        -0.5,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/guide-pulley-pin",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 54
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/top-pulley-cheek-left",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.013,
        1.89,
        -0.065,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/top-pulley-cheek-left",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.006,
            "height": 0.09,
            "depth": 0.09,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 55
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/top-pulley-cheek-right",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.013,
        1.89,
        -0.065,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/top-pulley-cheek-right",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.006,
            "height": 0.09,
            "depth": 0.09,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 56
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/top-wire-pulley",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.9,
        -0.04,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/top-wire-pulley",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 57
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/top-pulley-axle",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.9,
        -0.04,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/top-pulley-axle",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fastener",
        "BOMqty": 1
      },
      "gltfNode": 58
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/tension-roller-flange-rear",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.1,
        1.91,
        -0.536,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/tension-roller-flange-rear",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 59
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/guide-pulley-flange-lower",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.03,
        1.934,
        -0.5,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/guide-pulley-flange-lower",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 60
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/top-pulley-flange-left",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.006,
        1.9,
        -0.04,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/top-pulley-flange-left",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 61
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/tension-roller-flange-front",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.1,
        1.91,
        -0.524,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/tension-roller-flange-front",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 62
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/guide-pulley-flange-upper",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.03,
        1.946,
        -0.5,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/guide-pulley-flange-upper",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 63
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/top-pulley-flange-right",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.006,
        1.9,
        -0.04,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/top-pulley-flange-right",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 64
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/tension-pinch-roller",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.1,
        1.9592,
        -0.53,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/tension-pinch-roller",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 65
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/pinch-roller-arm",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.1,
        1.9592,
        -0.565,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/pinch-roller-arm",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.01,
            "height": 0.01,
            "depth": 0.06,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 66
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/wire-path",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/wire-path",
        "assetId": "a07-08-wire-edm",
        "componentRole": "consumable",
        "BOMqty": 1,
        "displayRadiusM": 0.0012
      },
      "gltfNode": 67
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/wire-recovery-box",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.61,
        -1.025,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/wire-recovery-box",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.3,
            "height": 0.42,
            "depth": 0.15,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 68
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/wire-cutter-unit",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.88,
        -1,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/wire-cutter-unit",
        "assetId": "a07-08-wire-edm",
        "componentRole": "actuator",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.12,
            "depth": 0.1,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 69
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/dielectric-supply-hose",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/dielectric-supply-hose",
        "assetId": "a07-08-wire-edm",
        "componentRole": "cable",
        "BOMqty": 1
      },
      "gltfNode": 70
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/dielectric-return-hose",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/dielectric-return-hose",
        "assetId": "a07-08-wire-edm",
        "componentRole": "cable",
        "BOMqty": 1
      },
      "gltfNode": 71
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/supply-nozzle-bar",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.55,
        1.25,
        0.3,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/supply-nozzle-bar",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fitting",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.02,
            "topRadius": 0.02,
            "height": 0.04,
            "radialSegments": 40,
            "chamfer": 0.0007000000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 72
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.142,
        1.51,
        -0.36,
        1
      ],
      "sourceUserData": {
        "partId": "brand-badge",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 73
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        0,
        -1,
        0,
        0,
        1,
        0,
        0,
        1,
        0,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "badge-orient",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 74
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient/badge-bezel",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient/badge-bezel",
        "assetId": "a07-08-wire-edm",
        "displayTopology": "INSERT_APERTURE_RING",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 75
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient/badge-backing",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient/badge-backing",
        "assetId": "a07-08-wire-edm",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 76
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient/badge-rivet-0",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.07844999999999999,
        -0.023450000000000002,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient/badge-rivet-0",
        "assetId": "a07-08-wire-edm",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 77
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient/badge-rivet-1",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.07844999999999999,
        0.023450000000000002,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient/badge-rivet-1",
        "assetId": "a07-08-wire-edm",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 78
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient/badge-rivet-2",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.07844999999999999,
        -0.023450000000000002,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient/badge-rivet-2",
        "assetId": "a07-08-wire-edm",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 79
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient/badge-rivet-3",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0.07844999999999999,
        0.023450000000000002,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient/badge-rivet-3",
        "assetId": "a07-08-wire-edm",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 80
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient/badge-D",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.040600000000000004,
        0,
        0,
        0,
        0,
        0.040600000000000004,
        0,
        0,
        0,
        0,
        0.0018000000000000002,
        0,
        -0.017864,
        0,
        0.00173,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient/badge-D",
        "assetId": "a07-08-wire-edm",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 81
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient/badge-S",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        0.040600000000000004,
        0,
        0,
        0,
        0,
        0.040600000000000004,
        0,
        0,
        0,
        0,
        0.0018000000000000002,
        0,
        0.017864,
        0,
        0.00173,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient/badge-S",
        "assetId": "a07-08-wire-edm",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 82
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient/badge-D-back",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.040600000000000004,
        0,
        -4.972066004538255e-18,
        0,
        0,
        0.040600000000000004,
        0,
        0,
        2.204364238465236e-19,
        0,
        -0.0018000000000000002,
        0,
        0.017864,
        0,
        -0.00173,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient/badge-D-back",
        "assetId": "a07-08-wire-edm",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 83
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient/badge-S-back",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        -0.040600000000000004,
        0,
        -4.972066004538255e-18,
        0,
        0,
        0.040600000000000004,
        0,
        0,
        2.204364238465236e-19,
        0,
        -0.0018000000000000002,
        0,
        -0.017864,
        0,
        -0.00173,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/brand-badge/badge-orient/badge-S-back",
        "assetId": "a07-08-wire-edm",
        "componentRole": "nameplate",
        "BOMqty": 1
      },
      "gltfNode": 84
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/a07-08-wire-edm:lower-guide",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.996,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm:lower-guide"
      },
      "gltfNode": 85
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame/a07-08-wire-edm:wire-bobbin",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/machine-frame",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.2,
        1.76,
        -0.465,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm:wire-bobbin"
      },
      "gltfNode": 86
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "work-tank",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 87
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank/tank-wall-left",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.61,
        0.99,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank/tank-wall-left",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.02,
            "height": 0.62,
            "depth": 1.04,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 88
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank/tank-wall-right",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.61,
        0.99,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank/tank-wall-right",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.02,
            "height": 0.62,
            "depth": 1.04,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 89
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank/tank-back-wall",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.52,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank/tank-back-wall",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "realOpening": "lower arm pass-through 0.124 x 0.116 m"
      },
      "gltfNode": 90
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank/panel-guide-left",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.635,
        0.85,
        0.532,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank/panel-guide-left",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.03,
            "height": 0.9,
            "depth": 0.04,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 91
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank/panel-guide-right",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.635,
        0.85,
        0.532,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank/panel-guide-right",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.03,
            "height": 0.9,
            "depth": 0.04,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 92
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank/tank-drain-port",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.63,
        0.76,
        -0.3,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank/tank-drain-port",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fitting",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.022,
            "topRadius": 0.022,
            "height": 0.02,
            "radialSegments": 40,
            "chamfer": 0.0007700000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 93
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank/tank-rim-left",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.61,
        1.31,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank/tank-rim-left",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.02,
            "depth": 1.06,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 94
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank/tank-rim-right",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.61,
        1.31,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank/tank-rim-right",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.02,
            "depth": 1.06,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 95
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank/tank-rim-back",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.31,
        -0.51,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank/tank-rim-back",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 1.17,
            "height": 0.02,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 96
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank/lower-arm-seal-boot",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.5,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/work-tank/lower-arm-seal-boot",
        "assetId": "a07-08-wire-edm",
        "componentRole": "seal",
        "BOMqty": 1
      },
      "gltfNode": 97
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/tank-front-wall",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.3,
        0.532,
        1
      ],
      "sourceUserData": {
        "partId": "tank-front-wall",
        "componentRole": "door",
        "BOMqty": 1
      },
      "gltfNode": 98
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/tank-front-wall/front-wall-panel",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/tank-front-wall",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.01,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/tank-front-wall/front-wall-panel",
        "assetId": "a07-08-wire-edm",
        "componentRole": "door",
        "BOMqty": 1,
        "realOpening": "viewing window 0.80 x 0.27 m"
      },
      "gltfNode": 99
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/tank-front-wall/front-wall-window",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/tank-front-wall",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.205,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/tank-front-wall/front-wall-window",
        "assetId": "a07-08-wire-edm",
        "componentRole": "door",
        "BOMqty": 1
      },
      "gltfNode": 100
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/tank-front-wall/front-wall-handle-1",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/tank-front-wall",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.25,
        -0.035,
        0.025,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/tank-front-wall/front-wall-handle-1",
        "assetId": "a07-08-wire-edm",
        "componentRole": "actuator",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.025,
            "depth": 0.03,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 101
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/tank-front-wall/front-wall-handle-2",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/tank-front-wall",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.25,
        -0.035,
        0.025,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/tank-front-wall/front-wall-handle-2",
        "assetId": "a07-08-wire-edm",
        "componentRole": "actuator",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.16,
            "height": 0.025,
            "depth": 0.03,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 102
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/tank-front-wall/a07-08-wire-edm:load-opening",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/tank-front-wall",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0.01,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm:load-opening"
      },
      "gltfNode": 103
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.716,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "y-saddle",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 104
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/y-saddle-plate",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.0275,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/y-saddle-plate",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.72,
            "height": 0.055,
            "depth": 0.5,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 105
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/y-carriage-block-1",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.24,
        -0.009,
        -0.16,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/y-carriage-block-1",
        "assetId": "a07-08-wire-edm",
        "componentRole": "bearing",
        "BOMqty": 1,
        "functionalInterface": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.018,
            "depth": 0.06,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "explicitPrimitiveRepair": {
          "schema": "lib3d-explicit-manual-cutset-repair/1",
          "id": "reviewed-guide-passage-1c5bac895a94",
          "sourceLFsha256": "sha256:f25caf4c4a236fc81dea50366c37aa2f5b20a33472bf8169a6243302f16db991",
          "sdkSourceSha256": "sha256:b6a9f4e2b0d44c606dd051666ab9a9cb7e53c9cfd044b25d2b71c8f5ca469b01",
          "kind": "atomic-cutset",
          "scope": "EXPERIMENTAL_DISPLAY_GEOMETRY_CANDIDATE",
          "booleanRetriangulated": true
        }
      },
      "gltfNode": 106
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/y-carriage-block-2",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.24,
        -0.009,
        -0.16,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/y-carriage-block-2",
        "assetId": "a07-08-wire-edm",
        "componentRole": "bearing",
        "BOMqty": 1,
        "functionalInterface": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.018,
            "depth": 0.06,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "explicitPrimitiveRepair": {
          "schema": "lib3d-explicit-manual-cutset-repair/1",
          "id": "reviewed-guide-passage-44141901c8ea",
          "sourceLFsha256": "sha256:f25caf4c4a236fc81dea50366c37aa2f5b20a33472bf8169a6243302f16db991",
          "sdkSourceSha256": "sha256:b6a9f4e2b0d44c606dd051666ab9a9cb7e53c9cfd044b25d2b71c8f5ca469b01",
          "kind": "atomic-cutset",
          "scope": "EXPERIMENTAL_DISPLAY_GEOMETRY_CANDIDATE",
          "booleanRetriangulated": true
        }
      },
      "gltfNode": 107
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/y-carriage-block-3",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.24,
        -0.009,
        0.16,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/y-carriage-block-3",
        "assetId": "a07-08-wire-edm",
        "componentRole": "bearing",
        "BOMqty": 1,
        "functionalInterface": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.018,
            "depth": 0.06,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "explicitPrimitiveRepair": {
          "schema": "lib3d-explicit-manual-cutset-repair/1",
          "id": "reviewed-guide-passage-05061870429a",
          "sourceLFsha256": "sha256:f25caf4c4a236fc81dea50366c37aa2f5b20a33472bf8169a6243302f16db991",
          "sdkSourceSha256": "sha256:b6a9f4e2b0d44c606dd051666ab9a9cb7e53c9cfd044b25d2b71c8f5ca469b01",
          "kind": "atomic-cutset",
          "scope": "EXPERIMENTAL_DISPLAY_GEOMETRY_CANDIDATE",
          "booleanRetriangulated": true
        }
      },
      "gltfNode": 108
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/y-carriage-block-4",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.24,
        -0.009,
        0.16,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/y-carriage-block-4",
        "assetId": "a07-08-wire-edm",
        "componentRole": "bearing",
        "BOMqty": 1,
        "functionalInterface": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.018,
            "depth": 0.06,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        },
        "explicitPrimitiveRepair": {
          "schema": "lib3d-explicit-manual-cutset-repair/1",
          "id": "reviewed-guide-passage-31c05a285dae",
          "sourceLFsha256": "sha256:f25caf4c4a236fc81dea50366c37aa2f5b20a33472bf8169a6243302f16db991",
          "sdkSourceSha256": "sha256:b6a9f4e2b0d44c606dd051666ab9a9cb7e53c9cfd044b25d2b71c8f5ca469b01",
          "kind": "atomic-cutset",
          "scope": "EXPERIMENTAL_DISPLAY_GEOMETRY_CANDIDATE",
          "booleanRetriangulated": true
        }
      },
      "gltfNode": 109
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/y-ballscrew-nut",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        -0.035,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/y-ballscrew-nut",
        "assetId": "a07-08-wire-edm",
        "componentRole": "transmission",
        "BOMqty": 1,
        "boreRadiusM": 0.0115
      },
      "gltfNode": 110
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-rail-1",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.0675,
        -0.17,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-rail-1",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.7,
            "height": 0.025,
            "depth": 0.025,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 111
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-rail-2",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.0675,
        0.17,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-rail-2",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.7,
            "height": 0.025,
            "depth": 0.025,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 112
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-ballscrew",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.08,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-ballscrew",
        "assetId": "a07-08-wire-edm",
        "componentRole": "transmission",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.01,
            "topRadius": 0.01,
            "height": 0.66,
            "radialSegments": 40,
            "chamfer": 0.00035000000000000005
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 113
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-screw-bearing-left",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.336,
        0.072,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-screw-bearing-left",
        "assetId": "a07-08-wire-edm",
        "componentRole": "bearing",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.034,
            "depth": 0.06,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 114
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-screw-bearing-right",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.336,
        0.072,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-screw-bearing-right",
        "assetId": "a07-08-wire-edm",
        "componentRole": "bearing",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.012,
            "height": 0.034,
            "depth": 0.06,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 115
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-belt-housing",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.375,
        0.046,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-belt-housing",
        "assetId": "a07-08-wire-edm",
        "componentRole": "transmission",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.026,
            "height": 0.09,
            "depth": 0.06,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 116
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-servo-motor",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.45,
        0.032,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-servo-motor",
        "assetId": "a07-08-wire-edm",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.028,
            "topRadius": 0.028,
            "height": 0.12,
            "radialSegments": 40,
            "chamfer": 0.0009800000000000002
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 117
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.096,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "x-table",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 118
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/x-table-plate",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.02,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/x-table-plate",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.7,
            "height": 0.04,
            "depth": 0.56,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 119
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/x-carriage-block-1",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.12,
        -0.009,
        -0.17,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/x-carriage-block-1",
        "assetId": "a07-08-wire-edm",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 120
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/x-carriage-block-2",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.12,
        -0.009,
        -0.17,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/x-carriage-block-2",
        "assetId": "a07-08-wire-edm",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 121
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/x-carriage-block-3",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.12,
        -0.009,
        0.17,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/x-carriage-block-3",
        "assetId": "a07-08-wire-edm",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 122
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/x-carriage-block-4",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.12,
        -0.009,
        0.17,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/x-carriage-block-4",
        "assetId": "a07-08-wire-edm",
        "componentRole": "bearing",
        "BOMqty": 1
      },
      "gltfNode": 123
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/x-ballscrew-nut",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.035,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/x-ballscrew-nut",
        "assetId": "a07-08-wire-edm",
        "componentRole": "transmission",
        "BOMqty": 1,
        "boreRadiusM": 0.0115
      },
      "gltfNode": 124
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/table-post-1",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.3,
        0.099,
        -0.23,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/table-post-1",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.118,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 125
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/table-post-2",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.3,
        0.099,
        -0.23,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/table-post-2",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.118,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 126
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/table-post-3",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.3,
        0.099,
        0.23,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/table-post-3",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.118,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 127
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/table-post-4",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.3,
        0.099,
        0.23,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/table-post-4",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.118,
            "depth": 0.05,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 128
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/work-stand-frame",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.158,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/work-stand-frame",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fixture",
        "BOMqty": 1,
        "realOpening": "wire/lower guide window 0.54 x 0.40 m"
      },
      "gltfNode": 129
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/work-clamp-1",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.3,
        0.198,
        -0.23,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/work-clamp-1",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fixture",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.02,
            "depth": 0.03,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 130
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/work-clamp-2",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.3,
        0.198,
        -0.23,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/work-clamp-2",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fixture",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.02,
            "depth": 0.03,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 131
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/work-clamp-3",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.3,
        0.198,
        0.23,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/work-clamp-3",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fixture",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.02,
            "depth": 0.03,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 132
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/work-clamp-4",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.3,
        0.198,
        0.23,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/work-clamp-4",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fixture",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.05,
            "height": 0.02,
            "depth": 0.03,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 133
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table/a07-08-wire-edm:work-table",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/y-saddle/x-table",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.188,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm:work-table"
      },
      "gltfNode": 134
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        1.235,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "z-ram",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 135
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/z-ram-body",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/z-ram-body",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1,
        "boreRadiusM": 0.008
      },
      "gltfNode": 136
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/z-carriage-block-1",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.045,
        0.25,
        -0.079,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/z-carriage-block-1",
        "assetId": "a07-08-wire-edm",
        "componentRole": "bearing",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.03,
            "height": 0.05,
            "depth": 0.018,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 137
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/z-carriage-block-2",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.045,
        0.25,
        -0.079,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/z-carriage-block-2",
        "assetId": "a07-08-wire-edm",
        "componentRole": "bearing",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.03,
            "height": 0.05,
            "depth": 0.018,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 138
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/z-carriage-block-3",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.045,
        0.35,
        -0.079,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/z-carriage-block-3",
        "assetId": "a07-08-wire-edm",
        "componentRole": "bearing",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.03,
            "height": 0.05,
            "depth": 0.018,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 139
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/z-carriage-block-4",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.045,
        0.35,
        -0.079,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/z-carriage-block-4",
        "assetId": "a07-08-wire-edm",
        "componentRole": "bearing",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.03,
            "height": 0.05,
            "depth": 0.018,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 140
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/z-ballscrew-nut",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.3,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/z-ballscrew-nut",
        "assetId": "a07-08-wire-edm",
        "componentRole": "transmission",
        "BOMqty": 1,
        "boreRadiusM": 0.0115
      },
      "gltfNode": 141
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/awt-unit",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0.12,
        0.09,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/awt-unit",
        "assetId": "a07-08-wire-edm",
        "componentRole": "actuator",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.1,
            "height": 0.12,
            "depth": 0.04,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 142
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/uv-housing",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.035,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/uv-housing",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1,
        "boreRadiusM": 0.008
      },
      "gltfNode": 143
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/awt-jet-nozzle",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.03,
        0.045,
        0.09,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/awt-jet-nozzle",
        "assetId": "a07-08-wire-edm",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.008,
            "topRadius": 0.008,
            "height": 0.03,
            "radialSegments": 40,
            "chamfer": 0.00028000000000000003
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 144
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-drive-motor",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.11,
        -0.0175,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-drive-motor",
        "assetId": "a07-08-wire-edm",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.015,
            "topRadius": 0.015,
            "height": 0.05,
            "radialSegments": 40,
            "chamfer": 0.0005250000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 145
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/v-drive-motor",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        -0.0175,
        0.11,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/v-drive-motor",
        "assetId": "a07-08-wire-edm",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.015,
            "topRadius": 0.015,
            "height": 0.05,
            "radialSegments": 40,
            "chamfer": 0.0005250000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 146
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.035,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "u-slide",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 147
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide/u-slide-plate",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.016,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide/u-slide-plate",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1,
        "realOpening": "wire slot ±0.036 m along X"
      },
      "gltfNode": 148
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide/v-slide",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.016,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "v-slide",
        "componentRole": "guide",
        "BOMqty": 1
      },
      "gltfNode": 149
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide/v-slide/v-slide-plate",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide/v-slide",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.016,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide/v-slide/v-slide-plate",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1,
        "boreRadiusM": 0.006
      },
      "gltfNode": 150
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide/v-slide/upper-guide-nozzle",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide/v-slide",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide/v-slide/upper-guide-nozzle",
        "assetId": "a07-08-wire-edm",
        "componentRole": "guide",
        "BOMqty": 1,
        "boreRadiusM": 0.003
      },
      "gltfNode": 151
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide/v-slide/a07-08-wire-edm:upper-guide",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/z-ram/u-slide/v-slide",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        -0.084,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm:upper-guide"
      },
      "gltfNode": 152
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "dielectric-unit",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 153
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/dielectric-tank",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1,
        0.42,
        -0.25,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/dielectric-tank",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.6,
            "height": 0.84,
            "depth": 1.2,
            "radius": 0.01,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 154
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/filter-box",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1,
        0.89,
        -0.55,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/filter-box",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.56,
            "height": 0.1,
            "depth": 0.5,
            "radius": 0.005,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 155
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/filter-canister-1",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.97,
        1.15,
        -0.55,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/filter-canister-1",
        "assetId": "a07-08-wire-edm",
        "componentRole": "filter",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.09,
            "topRadius": 0.09,
            "height": 0.42,
            "radialSegments": 40,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 156
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/filter-canister-2",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.23,
        1.15,
        -0.55,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/filter-canister-2",
        "assetId": "a07-08-wire-edm",
        "componentRole": "filter",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.09,
            "topRadius": 0.09,
            "height": 0.42,
            "radialSegments": 40,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 157
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/deionizer-resin-bottle",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.1,
        1.12,
        0.05,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/deionizer-resin-bottle",
        "assetId": "a07-08-wire-edm",
        "componentRole": "filter",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.1,
            "topRadius": 0.1,
            "height": 0.56,
            "radialSegments": 40,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 158
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/pump-base",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.08,
        0.85,
        0.24,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/pump-base",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.34,
            "height": 0.02,
            "depth": 0.18,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 159
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/dielectric-pump-motor",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        1.12,
        0.93,
        0.24,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/dielectric-pump-motor",
        "assetId": "a07-08-wire-edm",
        "componentRole": "motor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.07,
            "topRadius": 0.07,
            "height": 0.22,
            "radialSegments": 40,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 160
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/dielectric-pump-head",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        0,
        0,
        0,
        1,
        0,
        0.97,
        0.93,
        0.24,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/dielectric-pump-head",
        "assetId": "a07-08-wire-edm",
        "componentRole": "pump",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.07,
            "topRadius": 0.07,
            "height": 0.08,
            "radialSegments": 40,
            "chamfer": 0.0015
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 161
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/pump-outlet-fitting",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.95,
        1.02,
        0.24,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/pump-outlet-fitting",
        "assetId": "a07-08-wire-edm",
        "componentRole": "fitting",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.016,
            "topRadius": 0.016,
            "height": 0.05,
            "radialSegments": 40,
            "chamfer": 0.0005600000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 162
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/filter-pressure-gauge",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        1.1,
        0.89,
        -0.294,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/filter-pressure-gauge",
        "assetId": "a07-08-wire-edm",
        "componentRole": "sensor",
        "BOMqty": 1
      },
      "gltfNode": 163
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/level-sight-glass",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.3,
        0.45,
        0.353,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/level-sight-glass",
        "assetId": "a07-08-wire-edm",
        "componentRole": "sensor",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.03,
            "height": 0.4,
            "depth": 0.006,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 164
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/filter-cap-1",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0.97,
        1.37,
        -0.55,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/filter-cap-1",
        "assetId": "a07-08-wire-edm",
        "componentRole": "filter",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.095,
            "topRadius": 0.095,
            "height": 0.02,
            "radialSegments": 40,
            "chamfer": 0.0008
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 165
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/filter-cap-2",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        1.23,
        1.37,
        -0.55,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/dielectric-unit/filter-cap-2",
        "assetId": "a07-08-wire-edm",
        "componentRole": "filter",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.095,
            "topRadius": 0.095,
            "height": 0.02,
            "radialSegments": 40,
            "chamfer": 0.0008
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 166
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base",
      "type": "Group",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1
      ],
      "sourceUserData": {
        "partId": "control-cabinet",
        "componentRole": "frame",
        "BOMqty": 1
      },
      "gltfNode": 167
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/cabinet-body",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.05,
        0.875,
        -0.1,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/cabinet-body",
        "assetId": "a07-08-wire-edm",
        "componentRole": "frame",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.5,
            "height": 1.75,
            "depth": 0.7,
            "radius": 0.01,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 168
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-bezel",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.05,
        1.42,
        0.265,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-bezel",
        "assetId": "a07-08-wire-edm",
        "componentRole": "sensor",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.4,
            "height": 0.32,
            "depth": 0.03,
            "radius": 0.006,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 169
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-screen",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.05,
        1.44,
        0.282,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-screen",
        "assetId": "a07-08-wire-edm",
        "componentRole": "sensor",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.32,
            "height": 0.22,
            "depth": 0.006,
            "radius": 0.002,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 170
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-keypad",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.05,
        1.18,
        0.265,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-keypad",
        "assetId": "a07-08-wire-edm",
        "componentRole": "sensor",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.36,
            "height": 0.12,
            "depth": 0.03,
            "radius": 0.004,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 171
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/emergency-stop",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        2.220446049250313e-16,
        1,
        0,
        0,
        -1,
        2.220446049250313e-16,
        0,
        -0.92,
        1.18,
        0.29,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/emergency-stop",
        "assetId": "a07-08-wire-edm",
        "componentRole": "actuator",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "edge-chamfered-cylinder",
          "parameters": {
            "radius": 0.022,
            "topRadius": 0.022,
            "height": 0.025,
            "radialSegments": 40,
            "chamfer": 0.0007700000000000001
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 172
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/signal-tower",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.2,
        1.88,
        -0.3,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/signal-tower",
        "assetId": "a07-08-wire-edm",
        "componentRole": "sensor",
        "BOMqty": 1
      },
      "gltfNode": 173
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-1",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.19,
        1.18,
        0.283,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-1",
        "assetId": "a07-08-wire-edm",
        "componentRole": "sensor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.03,
            "height": 0.022,
            "depth": 0.008,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 174
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-2",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.15,
        1.18,
        0.283,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-2",
        "assetId": "a07-08-wire-edm",
        "componentRole": "sensor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.03,
            "height": 0.022,
            "depth": 0.008,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 175
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-3",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.1099999999999999,
        1.18,
        0.283,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-3",
        "assetId": "a07-08-wire-edm",
        "componentRole": "sensor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.03,
            "height": 0.022,
            "depth": 0.008,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 176
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-4",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.0699999999999998,
        1.18,
        0.283,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-4",
        "assetId": "a07-08-wire-edm",
        "componentRole": "sensor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.03,
            "height": 0.022,
            "depth": 0.008,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 177
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-5",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.03,
        1.18,
        0.283,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-5",
        "assetId": "a07-08-wire-edm",
        "componentRole": "sensor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.03,
            "height": 0.022,
            "depth": 0.008,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 178
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-6",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.99,
        1.18,
        0.283,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/hmi-key-6",
        "assetId": "a07-08-wire-edm",
        "componentRole": "sensor",
        "BOMqty": 1,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.03,
            "height": 0.022,
            "depth": 0.008,
            "radius": 0.002,
            "filletSegments": 2
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 179
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/cabinet-handle",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -0.85,
        0.8,
        0.26,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/cabinet-handle",
        "assetId": "a07-08-wire-edm",
        "componentRole": "actuator",
        "BOMqty": 1,
        "preserveGeometry": true,
        "manufacturingGeometry": {
          "schema": "lib3d-authored-manufacturing-geometry/1",
          "kind": "constant-radius-filleted-box",
          "parameters": {
            "width": 0.02,
            "height": 0.15,
            "depth": 0.02,
            "radius": 0.003,
            "filletSegments": 4
          },
          "scope": "ORIGINAL_DESIGN_DISPLAY_DETAIL_NOT_MANUFACTURER_SPEC"
        }
      },
      "gltfNode": 180
    },
    {
      "id": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/signal-tower-base",
      "parent": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet",
      "type": "Mesh",
      "visible": true,
      "localMatrix": [
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        0,
        0,
        0,
        1,
        0,
        -1.2,
        1.76,
        -0.3,
        1
      ],
      "sourceUserData": {
        "partId": "a07-08-wire-edm/a07-08-wire-edm:base/control-cabinet/signal-tower-base",
        "assetId": "a07-08-wire-edm",
        "componentRole": "sensor",
        "BOMqty": 1
      },
      "gltfNode": 181
    }
  ],
  "instanceExpansion": [],
  "manufacturerData": null,
  "manufacturerReference": null,
  "sourceEvidence": [
    {
      "origin": "ORIGINAL_DESIGN",
      "basis": "A07-08 설계 지침(베드+가공조 전면 벽 tank 하강, XY 테이블 x/y 중첩, 상부 암+헤드 z, 상부 가이드 테이퍼 u/v, 보빈→텐션 롤러→상부 가이드→하부 가이드→회수 정적 와이어 경로, 유전액 탱크·필터 박스·호스, 제어반, 프레임 base·upper-guide·lower-guide·work-table, 포트 mount·work)에 따른 자체 설계. 치수는 X400×Y300×Z250 급 비례의 자체 설계값."
    },
    {
      "origin": "PRINCIPLE_REFERENCE",
      "title": "S30 DMG MORI — Machine tools (machining centers, turning, EDM, grinding)",
      "url": "https://www.dmgmori.com/",
      "basis": "제품군 분류 참고; 열람하지 않음"
    }
  ],
  "rights": {
    "id": "a07-08-wire-edm",
    "assetTypeId": "a07-08-wire-edm",
    "schema": "lib3d-open-asset-rights/1",
    "policyVersion": "2026-10-27",
    "eligible": true,
    "sourceClass": "DECLARED_ORIGINAL_DESIGN",
    "sourceSha256": "sha256:73f824b6747405914ba1dd8666edabd90b458098e26ce121e6f725ee53893354",
    "modelSource": "kit/models/a07-08-wire-edm.mjs",
    "dslExampleSource": "dsl/models/a07-08-wire-edm.ds2",
    "access": {
      "public": true,
      "free": true,
      "keyless": true,
      "feeRequired": false,
      "apiKeyRequired": false,
      "registrationRequired": false
    },
    "allowedUses": {
      "view": true,
      "download": true,
      "store": true,
      "convert": true,
      "modify": true,
      "commercial": true,
      "redistribute": true,
      "genAI": true,
      "externalIntegration": true
    },
    "ownData": {
      "license": "CC0-1.0",
      "attributionRequired": false,
      "scope": "Only Dualsoft-owned geometry and asset/export metadata. Third-party CAD and vendor materials keep their own conditions."
    },
    "ownCode": {
      "license": "MIT",
      "attributionRequired": true,
      "scope": "Only Dualsoft-owned portions of approved model source, DS2 display examples and explicitly named open-asset interoperability helpers. Not the product engine, SDK or film runtime."
    },
    "dataLicenseExpression": "CC0-1.0",
    "sourceCodeLicenseExpression": "MIT",
    "licenseExpression": "CC0-1.0 AND MIT",
    "attributionRequired": true,
    "dataAttributionRequired": false,
    "thirdParty": [],
    "licenseFiles": [
      "LICENSES/CC0-1.0.txt",
      "LICENSES/MIT-Dualsoft.txt",
      "LICENSES/OPEN_ASSET_LICENSE.md",
      "LICENSES/SOURCE_AND_LICENSES.md",
      "LICENSES/ASSET-NOTICES/a07-08-wire-edm.txt"
    ],
    "runtime": {
      "included": false,
      "compatibleHostNeededForModelSource": true,
      "threeLicenseIfIncluded": "MIT",
      "engineAndSdkGrant": false
    },
    "exclusions": [
      "DSDX_PRODUCT_ENGINE",
      "SDK_IMPLEMENTATION",
      "COMPILER_AND_CONTROL_RUNTIME",
      "FILM_PRESENTATION_STACK",
      "STUDIO_MEDIA",
      "MANUFACTURER_REFERENCE_PDFS_AND_UNLICENSED_NATIVE_CAD"
    ],
    "executionAuthority": "DISPLAY_PREVIEW_ONLY",
    "physicalExecutionEligible": false
  },
  "licenseFiles": [
    {
      "path": "LICENSES/CC0-1.0.txt",
      "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499",
      "bytes": 7048
    },
    {
      "path": "LICENSES/MIT-Dualsoft.txt",
      "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee",
      "bytes": 1078
    },
    {
      "path": "LICENSES/OPEN_ASSET_LICENSE.md",
      "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9",
      "bytes": 5975
    },
    {
      "path": "LICENSES/SOURCE_AND_LICENSES.md",
      "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda",
      "bytes": 15163
    },
    {
      "path": "LICENSES/ASSET-NOTICES/a07-08-wire-edm.txt",
      "sha256": "sha256:9c600e6ceaa6d1a3d7c6cee9bccddef2a1e04b74b4449c06efdeb667ece71376",
      "bytes": 797
    }
  ],
  "downloads": {
    "glb": {
      "path": "open-assets/a07-08-wire-edm/model.glb",
      "bytes": 2268228,
      "sha256": "sha256:50282c0ee91f4ba345c6682f61e1a0c04243fac9e6c82e0d15971a2237c9a2df"
    },
    "licenses": [
      {
        "path": "open-assets/a07-08-wire-edm/LICENSES/CC0-1.0.txt",
        "bytes": 7048,
        "sha256": "sha256:a2010f343487d3f7618affe54f789f5487602331c0a8d03f49e9a7c547cf0499"
      },
      {
        "path": "open-assets/a07-08-wire-edm/LICENSES/MIT-Dualsoft.txt",
        "bytes": 1078,
        "sha256": "sha256:bde84f86be15b808fed7bbf3669ae4c2e669cab803daadf413bdda0e9e9fe7ee"
      },
      {
        "path": "open-assets/a07-08-wire-edm/LICENSES/OPEN_ASSET_LICENSE.md",
        "bytes": 5975,
        "sha256": "sha256:a2c57014be7291c75f875676ac67bee43ed5b7b2c686d88657c408f9ebbb59c9"
      },
      {
        "path": "open-assets/a07-08-wire-edm/LICENSES/SOURCE_AND_LICENSES.md",
        "bytes": 15163,
        "sha256": "sha256:360b96a2b541273edb439f8c4d10408c5388a05ae68a471521ee2a0156235eda"
      },
      {
        "path": "open-assets/a07-08-wire-edm/LICENSES/ASSET-NOTICES/a07-08-wire-edm.txt",
        "bytes": 797,
        "sha256": "sha256:9c600e6ceaa6d1a3d7c6cee9bccddef2a1e04b74b4449c06efdeb667ece71376"
      }
    ],
    "source": {
      "path": "kit/models/a07-08-wire-edm.mjs",
      "bytes": 2165130,
      "sha256": "sha256:73f824b6747405914ba1dd8666edabd90b458098e26ce121e6f725ee53893354"
    },
    "ds2": {
      "path": "dsl/models/a07-08-wire-edm.ds2",
      "bytes": 5805,
      "sha256": "sha256:2efda15ff5acda83aee2b310f96c1a050fac0f6179d3b73cf7da9639f78ee55d",
      "scope": "DISPLAY_PREVIEW"
    }
  },
  "dsl": {
    "previewMotion": {
      "schema": "lib3d-preview-motion-policy/1",
      "status": "REVIEW_REQUIRED",
      "reason": "NO_VERIFIED_TRAJECTORY",
      "automaticPlayback": false,
      "scope": "DISPLAY_PREVIEW",
      "wholeMachineCollisionClearance": "NOT_ESTABLISHED"
    },
    "scope": "DISPLAY_PREVIEW",
    "executionOrigin": "DECLARED_DISPLAY_PLAN",
    "runtimeTrace": "NOT_AVAILABLE",
    "physicalExecution": "NOT_RUN"
  },
  "verification": {
    "status": "PASS",
    "roundTrip": "THREE_GLTF_LOADER_ACTUAL_GEOMETRY",
    "nodeCount": 182,
    "triangles": 83088,
    "maxMatrixError": 0,
    "geometryAttributesVerified": true,
    "hierarchyVerified": true,
    "sourceUnchanged": true,
    "motionRoundTrip": "ORIGINAL_SDK_CALLBACK_VS_STANDALONE_GLB_CONTROLLER",
    "posesVerified": 20,
    "nodeComparisons": 3640,
    "semanticFrameComparisons": 120,
    "acceptanceCases": 5,
    "acceptanceFrameComparisons": 30,
    "maxMotionMatrixError": 0
  },
  "renderingPolicy": {
    "profile": "lib3d-surface-stability/1",
    "geometry": "EXACT_SDK_GEOMETRY_RETAINED_BY_EXPORT",
    "viewDepthScope": "TEMPORARY_MODEL_VIEW_ONLY",
    "viewDepthStepMeters": 0.00001,
    "coreGltfPreservesDepthBias": false,
    "adapterRequired": true,
    "controller": "asset-runtime.mjs",
    "surfaceUtility": "surface-stability.mjs",
    "cameraUtility": "camera-depth.mjs"
  },
  "limitations": [
    "GLB contains the initial pose; joint state is applied from ordered absolute bindings, with rest position/quaternion before each node update.",
    "Source invisible nodes are retained; glTF core has no visibility property. Apply node.extras.lib3dSourceVisible / metadata.nodes[].visible.",
    "Core glTF does not preserve Three.js polygonOffset; use the included display adapters and current camera bounds to avoid coplanar flicker in a consumer viewer.",
    "Nominal supplied geometry only. Incomplete cables/passive mechanisms and manufacturer limitations remain in manufacturerData/sourceEvidence. No physical-operation or complete-machine collision certification."
  ],
  "lineInterfaces": {
    "schema": "lib3d-line-interfaces/1",
    "assetTypeId": "a07-08-wire-edm",
    "kind": "equipment",
    "kindBasis": "ASSET_ID_AND_CATEGORY_INFERENCE",
    "kindInferred": true,
    "category": "A 공통 자동화와 가공 / A07 범용 가공기",
    "units": {
      "length": "m",
      "angle": "rad"
    },
    "coordinateProfile": "lib3d-world/1",
    "scope": "DISPLAY_PREVIEW",
    "core_verified": false,
    "physical_execution_eligible": false,
    "published": true,
    "parameters": [],
    "ports": {
      "mount": {
        "frameId": "base",
        "portClass": "mechanical-mount",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            0,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      },
      "work": {
        "frameId": "work-table",
        "portClass": "process",
        "direction": "bidirectional",
        "quaternion": [
          0,
          0,
          0,
          1
        ],
        "constraints": {},
        "inferred": true,
        "basis": "PORT_NAME_INFERENCE",
        "scope": "DISPLAY_PREVIEW",
        "pose": {
          "position": [
            0,
            1,
            0
          ],
          "quaternion": [
            0,
            0,
            0,
            1
          ]
        },
        "poseSource": "INITIAL_SDK_WORLD_FRAME"
      }
    }
  }
}
